Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2403.01894 · Scientific Reports

Wafer-scale uniformity improvement of Dolan-bridge Josephson junction by shadow evaporation bias correction

Daria A. Moskaleva, Nikita D. Korshakov, Dmitry O. Moskalev, Anastasiya A. Solovyova, Alexey R. Matanin, Elizaveta I. Malevannaya, Nikita S. Smirnov, M. Teleganov, Yuri V. Panfilov, Ilya A. Rodionov

Published Aug 1, 2025• 7 citations
arXivHTMLPDF

Abstract

One of the practical limitations of solid-state superconducting quantum processors is the collision of the qubit resonance frequencies, caused by their deviation from the design specifications due to the low reproducibility in qubit fabrication. Josephson junction 100 nm-scale nonlinear inductance of the qubits still suffers from Dolan-bridge shadow evaporation process. Here, we report on a robust wafer-scale Al/AlOx/Al Dolan-bridge Josephson junction (JJ) process using preliminary shadow evaporation bias resist mask correction and comprehensive oxidation optimization. We introduce a topology correction model for two-layer resist mask biasing at a wafer-scale, which takes into account an evaporation source geometry. It results in Josephson junction area variation coefficient ( $$\:{CV}_{A}$$ ) improvement down to 1.1% for the critical dimensions from 130 × 170 nm2 to 130 × 670 nm2 over 70 × 70 mm2 (49 cm2) wafer working area. Next, we investigate JJ oxidation process (oxidation method, pressure and time) and its impact on the room temperature resistance reproducibility. Finally, we combine both shadow evaporation bias correction and oxidation best practices for 4-inch wafers, improving $$\:{CV}_{{R}_{N}}$$ down to 6.0/5.2/4.1% for 0.025 µm2 JJ area and 4.0/3.4/2.3% for 0.090 µm2 JJ area for 49/25/16 cm2 wafer working area correspondingly. The proposed model and oxidation method can be useful for robust wafer-scale superconducting quantum processors fabrication.

DOI
10.1038/s41598-025-08787-5

Related papers

Uniformity improvement of Josephson-junction resistance by considering sidewall deposition during shadow evaporation for large-scale integration of qubits

Tsuyoshi Takahashi, Norinao Kouma, Yoshiyasu Doi +3 more

Abstract The uniformity of Josephson-junction (JJ) characteristics is crucial in wafer-scale superconducting quantum-bit (qubit) integration. To achieve the level of accuracy demanded the circuits, every detail of the fabrication process needs to be optimized. Here we reveal that the junction-resistance (R N) variations of Al/AlO x /Al JJs are affected by the metal deposition on the sidewall of the resist mask during shadow evaporation. The effect is reproduced in numerical simulation using a simple model taking into account the resist structure and the evaporation angle. To overcome the issue, we introduce a two-step shadow evaporation method to reduce the variation of R N. As a result, the coefficient of variations across a 3-inch wafer decreases from 6.7% to 4.5%, achieving 1.1% in a chip with an area of 10 mm × 10 mm. This method is promising for developing large-scale superconducting quantum computers.

Japanese Journal of Applied Physics•Nov 14, 2022•12 citations

Improving Josephson junction reproducibility for superconducting quantum circuits: shadow evaporation and oxidation

Dmitry O. Moskalev, E. V. Zikiy, Anastasiya A. Pishchimova +5 more

The most commonly used physical realization of superconducting qubits for quantum circuits is a transmon. There are a number of superconducting quantum circuits applications, where Josephson junction critical current reproducibility over a chip is crucial. Here, we report on a robust chip scale $Al/AlO_x/Al$ junctions fabrication method due to comprehensive study of shadow evaporation and oxidation steps. We experimentally demonstrate the evidence of optimal Josephson junction electrodes thickness, deposition rate and deposition angle, which ensure minimal electrode surface and line edge roughness. The influence of oxidation method, pressure and time on critical current reproducibility is determined. With the proposed method we demonstrate $Al/AlO_x/Al$ junction fabrication with the critical current variation ($σ/I_c$) less than 3.9% (from $150\times200$ to $150\times600$ $nm^2$ area) and 7.7% (for $100\times100$ $nm^2$ area) over $20\times20$ $mm^2$ chip. Finally, we fabricate separately three $5\times10$ $mm^2$ chips with 18 transmon qubits (near 4.3 GHz frequency) showing less than 1.9% frequency variation between qubit on different chips. The proposed approach and optimization criteria can be utilized for a robust wafer-scale superconducting qubit circuits fabrication.

arXiv:2212.06692•Dec 13, 2022•1 citation

Optimization of shadow evaporation and oxidation for reproducible quantum Josephson junction circuits

Dmitry O. Moskalev, E. V. Zikiy, Anastasiya A. Pishchimova +5 more

Abstract The most commonly used physical realization of superconducting qubits for quantum circuits is a transmon. There are a number of superconducting quantum circuits applications, where Josephson junction critical current reproducibility over a chip is crucial. Here, we report on a robust chip scale Al/AlO x /Al junctions fabrication method due to comprehensive study of shadow evaporation and oxidation steps. We experimentally demonstrate the evidence of optimal Josephson junction electrodes thickness, deposition rate and deposition angle, which ensure minimal electrode surface and line edge roughness. The influence of oxidation method, pressure and time on critical current reproducibility is determined. With the proposed method we demonstrate Al/AlO x /Al junction fabrication with the critical current variation $$(\sigma /\langle {I_{c} } \rangle )$$ ( σ / ⟨ I c ⟩ ) less than 3.9% (from 150 × 200 to 150 × 600 nm 2 area) and 7.7% (for 100 × 100 nm 2 area) over 20 × 20 mm 2 chip. Finally, we fabricate separately three 5 × 10 mm 2 chips with 18 transmon qubits (near 4.3 GHz frequency) showing less than 1.9% frequency variation between qubits on different chips. The proposed approach and optimization criteria can be utilized for a robust wafer-scale superconducting qubit circuits fabrication.

Scientific Reports•Mar 13, 2023•40 citations

Wafer-Scale Al Junction Technology for Superconducting Quantum Circuits

Matthias Schmelz, E. Mutsenik, S. Bravin +8 more

Josephson tunnel junctions represent a key element in superconducting electronics and quantum circuits. For many years, shadow evaporation by means of Dolan-type bridges has been the state-of-the-art for deep sub- micrometer sized structures. Increasing demand in the number of Josephson junctions, e.g. in qubit circuits and travelling wave parametric amplifiers, requests for a wafer-scale fabrication process with precise control of junction parameters and have led to an advanced lift-off technique called Manhattan-type junction technology in recent years. Herein, we report on the development of a 100 mm wafer-scale fabrication technology for deep sub-micrometer sized Al Josephson junctions with linear dimensions down to 180 nm. The critical currentICof the junctions ranges from about 10 to 120 nA scaling with their linear dimensions. Low temperature transport measurements as well as room-temperature characterization has been used forICand process homogeneity determination of series arrays of up to 50 Josephson junctions. We discuss technology parameters such as yield, on-chip and on-wafer reproducibility of the junction's critical currents as well as main process limitations. Moreover, we present experimental results on the characterization of first transmon-type qubits fabricated using this technology.

IEEE Transactions on Applied Superconductivity•Feb 9, 2024•6 citations

Improving wafer-scale Josephson junction resistance variation in superconducting quantum coherent circuits

John Mark Kreikebaum, Kevin P. O’Brien, Alexis Morvan +1 more

Abstract Quantum bits, or qubits, are an example of coherent circuits envisioned for next-generation computers and detectors. A robust superconducting qubit with a coherent lifetime of O(100 µs) is the transmon: a Josephson junction functioning as a non-linear inductor shunted with a capacitor to form an anharmonic oscillator. In a complex device with many such transmons, precise control over each qubit frequency is often required, and thus variations of the junction area and tunnel barrier thickness must be sufficiently minimized to achieve optimal performance while avoiding spectral overlap between neighboring circuits. Simply transplanting our recipe optimized for single, stand-alone devices to wafer-scale (producing 64, 1x1 cm dies from a 150 mm wafer) initially resulted in global drifts in room-temperature tunneling resistance of ± 30%. Inferring a critical current I c variation from this resistance distribution, we present an optimized process developed from a systematic 38 wafer study that results in < 3.5% relative standard deviation (RSD) in critical current ( ≡ σ I c / I c ) for 3000 Josephson junctions (both single-junctions and asymmetric SQUIDs) across an area of 49 cm2. Looking within a 1x1 cm moving window across the substrate gives an estimate of the variation characteristic of a given qubit chip. Our best process, utilizing ultrasonically assisted development, uniform ashing, and dynamic oxidation has shown σ I c / I c = 1.8% within 1x1 cm, on average, with a few 1x1 cm areas having σ I c / I c < 1.0% (equivalent to σ f / f < 0.5%). Such stability would drastically improve the yield of multi-junction chips with strict critical current requirements.

arXiv:1909.09165•Superconductor Science and Technology•Apr 29, 2020•127 citations

Wafer-scale uniformity of Dolan-bridge and bridgeless Manhattan-style Josephson junctions for superconducting quantum processors

Nandini Muthusubramanian, Matvey I. Finkel, Pim Duivestein +7 more

Abstract We investigate die-level and wafer-scale uniformity of Dolan-bridge and bridgeless Manhattan-style Josephson junctions, using multiple substrates with and without through-silicon vias (TSVs). Dolan junctions fabricated on planar substrates have the highest yield and lowest room-temperature conductance spread, equivalent to ∼ 100 M H z in transmon frequency. In TSV-integrated substrates, Dolan junctions suffer most in both yield and disorder, making Manhattan junctions preferable. Manhattan junctions show pronounced conductance decrease from wafer center to edge, which we qualitatively capture using a geometric model of spatially-dependent resist shadowing during junction electrode evaporation. Analysis of actual junction overlap areas using scanning electron micrographs supports the model, and further points to a remnant spatial dependence possibly due to contact resistance.

arXiv:2304.09111•Quantum Science and Technology•Dec 29, 2023•21 citations
One of the practical limitations of solid-state superconducting quantum processors is the collision of the qubit resonance frequencies, caused by their deviation from the design specifications due to the low reproducibility in qubit fabrication. Josephson junction 100 nm-scale nonlinear inductance of the qubits still suffers from Dolan-bridge shadow evaporation process. Here, we report on a robust wafer-scale Al/AlOx/Al Dolan-bridge Josephson junction (JJ) process using preliminary shadow evaporation bias resist mask correction and comprehensive oxidation optimization. We introduce a topology correction model for two-layer resist mask biasing at a wafer-scale, which takes into account an evaporation source geometry. It results in Josephson junction area variation coefficient (  CVA\:{CV}_{A}CVA​ ) improvement down to 1.1% for the critical dimensions from 130 × 170 nm2 to 130 × 670 nm2 over 70 × 70 mm2 (49 cm2) wafer working area. Next, we investigate JJ oxidation process (oxidation method, pressure and time) and its impact on the room temperature resistance reproducibility. Finally, we combine both shadow evaporation bias correction and oxidation best practices for 4-inch wafers, improving  CVRN\:{CV}_{{R}_{N}}CVRN​​ down to 6.0/5.2/4.1% for 0.025 µm2 JJ area and 4.0/3.4/2.3% for 0.090 µm2 JJ area for 49/25/16 cm2 wafer working area correspondingly. The proposed model and oxidation method can be useful for robust wafer-scale superconducting quantum processors fabrication.
Abstract The uniformity of Josephson-junction (JJ) characteristics is crucial in wafer-scale superconducting quantum-bit (qubit) integration. To achieve the level of accuracy demanded the circuits, every detail of the fabrication process needs to be optimized. Here we reveal that the junction-resistance (R N) variations of Al/AlO x /Al JJs are affected by the metal deposition on the sidewall of the resist mask during shadow evaporation. The effect is reproduced in numerical simulation using a simple model taking into account the resist structure and the evaporation angle. To overcome the issue, we introduce a two-step shadow evaporation method to reduce the variation of R N. As a result, the coefficient of variations across a 3-inch wafer decreases from 6.7% to 4.5%, achieving 1.1% in a chip with an area of 10 mm × 10 mm. This method is promising for developing large-scale superconducting quantum computers.
The most commonly used physical realization of superconducting qubits for quantum circuits is a transmon. There are a number of superconducting quantum circuits applications, where Josephson junction critical current reproducibility over a chip is crucial. Here, we report on a robust chip scale Al/AlOx/AlAl/AlO_x/AlAl/AlOx​/Al junctions fabrication method due to comprehensive study of shadow evaporation and oxidation steps. We experimentally demonstrate the evidence of optimal Josephson junction electrodes thickness, deposition rate and deposition angle, which ensure minimal electrode surface and line edge roughness. The influence of oxidation method, pressure and time on critical current reproducibility is determined. With the proposed method we demonstrate Al/AlOx/AlAl/AlO_x/AlAl/AlOx​/Al junction fabrication with the critical current variation (σ/Icσ/I_cσ/Ic​) less than 3.9% (from 150×200150\times200150×200 to 150×600150\times600150×600 nm2nm^2nm2 area) and 7.7% (for 100×100100\times100100×100 nm2nm^2nm2 area) over 20×2020\times2020×20 mm2mm^2mm2 chip. Finally, we fabricate separately three 5×105\times105×10 mm2mm^2mm2 chips with 18 transmon qubits (near 4.3 GHz frequency) showing less than 1.9% frequency variation between qubit on different chips. The proposed approach and optimization criteria can be utilized for a robust wafer-scale superconducting qubit circuits fabrication.
Abstract The most commonly used physical realization of superconducting qubits for quantum circuits is a transmon. There are a number of superconducting quantum circuits applications, where Josephson junction critical current reproducibility over a chip is crucial. Here, we report on a robust chip scale Al/AlO x /Al junctions fabrication method due to comprehensive study of shadow evaporation and oxidation steps. We experimentally demonstrate the evidence of optimal Josephson junction electrodes thickness, deposition rate and deposition angle, which ensure minimal electrode surface and line edge roughness. The influence of oxidation method, pressure and time on critical current reproducibility is determined. With the proposed method we demonstrate Al/AlO x /Al junction fabrication with the critical current variation (σ/⟨Ic⟩)(\sigma /\langle {I_{c} } \rangle )(σ/⟨Ic​⟩) ( σ / ⟨ I c ⟩ ) less than 3.9% (from 150 × 200 to 150 × 600 nm 2 area) and 7.7% (for 100 × 100 nm 2 area) over 20 × 20 mm 2 chip. Finally, we fabricate separately three 5 × 10 mm 2 chips with 18 transmon qubits (near 4.3 GHz frequency) showing less than 1.9% frequency variation between qubits on different chips. The proposed approach and optimization criteria can be utilized for a robust wafer-scale superconducting qubit circuits fabrication.
Josephson tunnel junctions represent a key element in superconducting electronics and quantum circuits. For many years, shadow evaporation by means of Dolan-type bridges has been the state-of-the-art for deep sub- micrometer sized structures. Increasing demand in the number of Josephson junctions, e.g. in qubit circuits and travelling wave parametric amplifiers, requests for a wafer-scale fabrication process with precise control of junction parameters and have led to an advanced lift-off technique called Manhattan-type junction technology in recent years. Herein, we report on the development of a 100 mm wafer-scale fabrication technology for deep sub-micrometer sized Al Josephson junctions with linear dimensions down to 180 nm. The critical currentICof the junctions ranges from about 10 to 120 nA scaling with their linear dimensions. Low temperature transport measurements as well as room-temperature characterization has been used forICand process homogeneity determination of series arrays of up to 50 Josephson junctions. We discuss technology parameters such as yield, on-chip and on-wafer reproducibility of the junction's critical currents as well as main process limitations. Moreover, we present experimental results on the characterization of first transmon-type qubits fabricated using this technology.
Abstract Quantum bits, or qubits, are an example of coherent circuits envisioned for next-generation computers and detectors. A robust superconducting qubit with a coherent lifetime of O(100 µs) is the transmon: a Josephson junction functioning as a non-linear inductor shunted with a capacitor to form an anharmonic oscillator. In a complex device with many such transmons, precise control over each qubit frequency is often required, and thus variations of the junction area and tunnel barrier thickness must be sufficiently minimized to achieve optimal performance while avoiding spectral overlap between neighboring circuits. Simply transplanting our recipe optimized for single, stand-alone devices to wafer-scale (producing 64, 1x1 cm dies from a 150 mm wafer) initially resulted in global drifts in room-temperature tunneling resistance of ± 30%. Inferring a critical current I c variation from this resistance distribution, we present an optimized process developed from a systematic 38 wafer study that results in < 3.5% relative standard deviation (RSD) in critical current ( ≡ σ I c / I c ) for 3000 Josephson junctions (both single-junctions and asymmetric SQUIDs) across an area of 49 cm2. Looking within a 1x1 cm moving window across the substrate gives an estimate of the variation characteristic of a given qubit chip. Our best process, utilizing ultrasonically assisted development, uniform ashing, and dynamic oxidation has shown σ I c / I c = 1.8% within 1x1 cm, on average, with a few 1x1 cm areas having σ I c / I c < 1.0% (equivalent to σ f / f < 0.5%). Such stability would drastically improve the yield of multi-junction chips with strict critical current requirements.
Abstract We investigate die-level and wafer-scale uniformity of Dolan-bridge and bridgeless Manhattan-style Josephson junctions, using multiple substrates with and without through-silicon vias (TSVs). Dolan junctions fabricated on planar substrates have the highest yield and lowest room-temperature conductance spread, equivalent to ∼ 100 M H z in transmon frequency. In TSV-integrated substrates, Dolan junctions suffer most in both yield and disorder, making Manhattan junctions preferable. Manhattan junctions show pronounced conductance decrease from wafer center to edge, which we qualitatively capture using a geometric model of spatially-dependent resist shadowing during junction electrode evaporation. Analysis of actual junction overlap areas using scanning electron micrographs supports the model, and further points to a remnant spatial dependence possibly due to contact resistance.