Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2312.02161

Efficient LDPC Decoding using Physical Computation

Uday Kumar Reddy Vengalam, Hahn, Andrew, Yongchao Liu, Anshujit Sharma, Hui Wu, Michael C.Y. Huang

Published Sep 21, 2023• 2 citations
arXivHTMLPDF

Abstract

Due to 5G deployment, there is significant interest in LDPC decoding. While much research is devoted on efficient hardwiring of algorithms based on Belief Propagation (BP), it has been shown that LDPC decoding can be formulated as a combinatorial optimization problem, which could benefit from significant acceleration of physical computation mechanisms such as Ising machines. This approach has so far resulted in poor performance. This paper shows that the reason is not fundamental but suboptimal hardware and formulation. A co-designed Ising machine-based system can improve speed by 3 orders of magnitude. As a result, a physical computation approach can outperform hardwiring state-of-the-art algorithms. In this paper, we show such an augmented Ising machine that is 4.4$\times$ more energy efficient than the state of the art in the literature.

DOI
10.48550/arxiv.2312.02161

Related papers

A new LDPC decoder hardware implementation with improved error rates

Philipp Schläfer, Stefan Scholl, E. Leonardi +1 more

LDPC codes are commonly decoded by conventional belief propagation algorithms like the min-sum algorithm. However especially for small block lengths belief propagation performs poorly in comparison to maximum likelihood decoding. In this paper we propose a new decoding algorithm, that is inspired by augmented belief propagation from literature and present hardware architectures and implementations for 28nm ASIC technology. The new decoder has a much higher complexity, but provides a gain of up to 1.2 dB signal-to-noise ratio compared to conventional belief propagation decoding.

IEEE Jordan Conference on Applied Electrical Engineering and Computing Technologies•Nov 1, 2015•5 citations

LDPC Decoder Based on Markov Chain Monte Carlo Method

Jiejun Jin, Xiao Liang, Yunhao Xu +3 more

Low-density parity check (LDPC) codes have attracted the attention of a large number of researchers with its near-Shannon performance and easy implementation features. As a data coding scheme under the 5G scenario, how to achieve efficient encoding/decoding for LDPC codes has become one of the important research topics. Under this condition, this paper 1) proposes a novel decoding algorithm for LDPC codes using the Markov Chain Monte Carlo (MCMC) method and 2) introduces two improved versions, MCMC-S and MCMC-L, which achieve better results. Simulation figures show that the improved methods outperform the traditional belief propagation (BP) decoding method in relatively short codes by more than 1 dB at the bit error rate (BER) of 10-3. Very large scale integration (VLSI) architecture of the proposed method is also given in this paper.

IEEE Asia Pacific Conference on Circuits and Systems (APCCAS)•Oct 1, 2018•0 citations

A New LDPC Code Decoding Method: Expanding the Scope of Ising Machines

Masashi Tawada, Shu Tanaka, Nozomu Togawa

Low-density parity-check (LDPC) codes have previously been considered as combinatorial optimization problems (COPs) in respect to its decoding. However, after defining it as such, none have gone so far as to convert the LDPC code into a quadratic unconstrained binary optimization (QUBO) problem. Thus, a new method is created: one that converts the LDPC code to a QUBO problem, inputs the QUBO problem into Ising machines (computers based on the Ising model that are designed to solve the QUBO problem), obtains the QUBO solution and converts it to a LDPC solution. By utilizing an actual Ising machine, LDPC solutions with code length of 256-bits have been obtained with an accuracy of 93.9% by average annealing time 214.0ms. The benefit of this newfound methodology goes beyond its theoretical imprint of obtaining LDPC solutions more accurately. It has only been a few years since the Ising machine has been developed. Therefore, in formulating this method, one expands the currently scope of studies involving Ising machines, helping current and future researchers unlock its full range of capabilities and possibilities.

International Conference on Consumer Electronics•Jan 1, 2020•7 citations

Generic Architecture for LDPC Codes Decoding

Frédéric Guilloud

The Low-Density Parity-Check codes are among the most powerful forward error correcting codes, since they enable to get as close as a fraction of a dB from the Shannon limit.This astonishing performance combined with their relatively simple decoding algorithmmake these codes very attractive for the next digital transmission system generations. Itis already the case for the next digital satellite broadcasting standard (DVB-S2), where an irregular LDPC code has been chosen to protect the downlink information. In this thesis, we focused our research on the iterative decoding algorithms and their hardware implementations. We proposed first a suboptimal algorithm named the λ-min algorithm. It reduces significantly the complexity of the decoder without any significant performance loss, as compared to the belief propagation (BP) algorithm. Then we studied and designed a generic architecture of an LDPC decoder, which has been implemented on a FPGA based platform. This hardware decoder enables to accelerate the simulations more than 500 times as compared to software simulations. Moreover, based on an all-tunable design, our decoder features many facilities: It is possible to configure it for a very wide code family, so that the research for good codes is processed faster ; thanks to the genericity of the processing components, it is also possible to optimize the internal coding format, and even to compare various decoding algorithms and various processing schedules. Finally, our experience in the area of LDPC decoders led us to propose a formal framework for analysing the architectures of LDPC decoders. This framework encompassesboth the datapath (parallelism, node processors architectures) and the control mode associated to the several decoding schedules. Thus within this framework, a classification of the different state-of-the-art LDPC decoders is proposed. Moreover, some synthesis of efficient and unpublished architectures have been also proposed.

•Jan 1, 2004•30 citations

Low-Complexity Neural Belief Propagation Algorithm for LDPC Decoding

Haojia Zhang, Shuai Han, Hao Chen

With the rapid development of deep learning research and physical layer communication applications, deep learning-based channel coding has gradually become a research hotspot. In this paper, we propose a LDPC decoding network based on neural belief propagation (NBP) decoding. By introducing weights sharing mechanism, the weights vary across different iterations. The number of parameters is reduced, which significantly lowers memory requirements. In addition, we optimize the loss function to better train the model, achieving a lower bit error rate (BER) performance. Experimental results show that the proposed decoder yields significant performance improvements with respect to NBP, and significantly reducing the number of learnable weights.

International Wireless Communications and Mobile Computing Conference (IWCMC)•May 12, 2025•4 citations

High-Performance and Energy-Efficient Decoder Design for Non-Binary LDPC Codes

Yuta Toriyama

Binary Low-Density Parity-Check (LDPC) codes are a type of error correction code known to exhibit excellent error-correcting capabilities, and have increasingly been applied as the forward error correction solution in a multitude of systems and standards, such as wireless communications, wireline communications, and data storage systems. In the pursuit of codes with even higher coding gain, non-binary LDPC (NB-LDPC) codes defined over a Galois field of order q have risen as a strong replacement candidate. For codes defined with similar rate and length, NB-LDPC codes exhibit a significant coding gain improvement relative to that of their binary counterparts.Unfortunately, NB-LDPC codes are currently limited from practical application by the immense complexity of their decoding algorithms, because the improved error-rate performance of higher field orders comes at the cost of increasing decoding algorithm complexity. Currently available ASIC implementation solutions for NB-LDPC code decoders are simultaneously low in throughput and power-hungry, leading to a low energy efficiency.We propose several techniques at the algorithm level as well as hardware architecture level in an attempt to bring NB-LDPC codes closer to practical deployment. On the algorithm side, we propose several algorithmic modifications and analyze the corresponding hardware cost alleviation as well as impact on coding gain. We also study the quantization scheme for NB-LDPC decoders, again in the context of both the hardware and coding gain impacts, and we propose a technique that enables a good tradeoff in this space. On the hardware side, we develop a FPGA-based NB-LDPC decoder platform for architecture prototyping as well as hardware acceleration of code evaluation via error rate simulations. We also discuss the architectural techniques and innovations corresponding to our proposed algorithm for optimization of the implementation. Finally, a proof-of-concept ASIC chip is realized that integrates many of the proposed techniques. We are able to achieve a 3.7x improvement in the information throughput and 23.8x improvement in the energy efficiency over prior state-of-the-art, without sacrificing the strong error correcting capabilities of the NB-LDPC code.

•Jan 1, 2016•0 citations
Due to 5G deployment, there is significant interest in LDPC decoding. While much research is devoted on efficient hardwiring of algorithms based on Belief Propagation (BP), it has been shown that LDPC decoding can be formulated as a combinatorial optimization problem, which could benefit from significant acceleration of physical computation mechanisms such as Ising machines. This approach has so far resulted in poor performance. This paper shows that the reason is not fundamental but suboptimal hardware and formulation. A co-designed Ising machine-based system can improve speed by 3 orders of magnitude. As a result, a physical computation approach can outperform hardwiring state-of-the-art algorithms. In this paper, we show such an augmented Ising machine that is 4.4×\times× more energy efficient than the state of the art in the literature.
LDPC codes are commonly decoded by conventional belief propagation algorithms like the min-sum algorithm. However especially for small block lengths belief propagation performs poorly in comparison to maximum likelihood decoding. In this paper we propose a new decoding algorithm, that is inspired by augmented belief propagation from literature and present hardware architectures and implementations for 28nm ASIC technology. The new decoder has a much higher complexity, but provides a gain of up to 1.2 dB signal-to-noise ratio compared to conventional belief propagation decoding.
Low-density parity check (LDPC) codes have attracted the attention of a large number of researchers with its near-Shannon performance and easy implementation features. As a data coding scheme under the 5G scenario, how to achieve efficient encoding/decoding for LDPC codes has become one of the important research topics. Under this condition, this paper 1) proposes a novel decoding algorithm for LDPC codes using the Markov Chain Monte Carlo (MCMC) method and 2) introduces two improved versions, MCMC-S and MCMC-L, which achieve better results. Simulation figures show that the improved methods outperform the traditional belief propagation (BP) decoding method in relatively short codes by more than 1 dB at the bit error rate (BER) of 10-3. Very large scale integration (VLSI) architecture of the proposed method is also given in this paper.
Low-density parity-check (LDPC) codes have previously been considered as combinatorial optimization problems (COPs) in respect to its decoding. However, after defining it as such, none have gone so far as to convert the LDPC code into a quadratic unconstrained binary optimization (QUBO) problem. Thus, a new method is created: one that converts the LDPC code to a QUBO problem, inputs the QUBO problem into Ising machines (computers based on the Ising model that are designed to solve the QUBO problem), obtains the QUBO solution and converts it to a LDPC solution. By utilizing an actual Ising machine, LDPC solutions with code length of 256-bits have been obtained with an accuracy of 93.9% by average annealing time 214.0ms. The benefit of this newfound methodology goes beyond its theoretical imprint of obtaining LDPC solutions more accurately. It has only been a few years since the Ising machine has been developed. Therefore, in formulating this method, one expands the currently scope of studies involving Ising machines, helping current and future researchers unlock its full range of capabilities and possibilities.
The Low-Density Parity-Check codes are among the most powerful forward error correcting codes, since they enable to get as close as a fraction of a dB from the Shannon limit.This astonishing performance combined with their relatively simple decoding algorithmmake these codes very attractive for the next digital transmission system generations. Itis already the case for the next digital satellite broadcasting standard (DVB-S2), where an irregular LDPC code has been chosen to protect the downlink information. In this thesis, we focused our research on the iterative decoding algorithms and their hardware implementations. We proposed first a suboptimal algorithm named the λ-min algorithm. It reduces significantly the complexity of the decoder without any significant performance loss, as compared to the belief propagation (BP) algorithm. Then we studied and designed a generic architecture of an LDPC decoder, which has been implemented on a FPGA based platform. This hardware decoder enables to accelerate the simulations more than 500 times as compared to software simulations. Moreover, based on an all-tunable design, our decoder features many facilities: It is possible to configure it for a very wide code family, so that the research for good codes is processed faster ; thanks to the genericity of the processing components, it is also possible to optimize the internal coding format, and even to compare various decoding algorithms and various processing schedules. Finally, our experience in the area of LDPC decoders led us to propose a formal framework for analysing the architectures of LDPC decoders. This framework encompassesboth the datapath (parallelism, node processors architectures) and the control mode associated to the several decoding schedules. Thus within this framework, a classification of the different state-of-the-art LDPC decoders is proposed. Moreover, some synthesis of efficient and unpublished architectures have been also proposed.
With the rapid development of deep learning research and physical layer communication applications, deep learning-based channel coding has gradually become a research hotspot. In this paper, we propose a LDPC decoding network based on neural belief propagation (NBP) decoding. By introducing weights sharing mechanism, the weights vary across different iterations. The number of parameters is reduced, which significantly lowers memory requirements. In addition, we optimize the loss function to better train the model, achieving a lower bit error rate (BER) performance. Experimental results show that the proposed decoder yields significant performance improvements with respect to NBP, and significantly reducing the number of learnable weights.
Binary Low-Density Parity-Check (LDPC) codes are a type of error correction code known to exhibit excellent error-correcting capabilities, and have increasingly been applied as the forward error correction solution in a multitude of systems and standards, such as wireless communications, wireline communications, and data storage systems. In the pursuit of codes with even higher coding gain, non-binary LDPC (NB-LDPC) codes defined over a Galois field of order q have risen as a strong replacement candidate. For codes defined with similar rate and length, NB-LDPC codes exhibit a significant coding gain improvement relative to that of their binary counterparts.Unfortunately, NB-LDPC codes are currently limited from practical application by the immense complexity of their decoding algorithms, because the improved error-rate performance of higher field orders comes at the cost of increasing decoding algorithm complexity. Currently available ASIC implementation solutions for NB-LDPC code decoders are simultaneously low in throughput and power-hungry, leading to a low energy efficiency.We propose several techniques at the algorithm level as well as hardware architecture level in an attempt to bring NB-LDPC codes closer to practical deployment. On the algorithm side, we propose several algorithmic modifications and analyze the corresponding hardware cost alleviation as well as impact on coding gain. We also study the quantization scheme for NB-LDPC decoders, again in the context of both the hardware and coding gain impacts, and we propose a technique that enables a good tradeoff in this space. On the hardware side, we develop a FPGA-based NB-LDPC decoder platform for architecture prototyping as well as hardware acceleration of code evaluation via error rate simulations. We also discuss the architectural techniques and innovations corresponding to our proposed algorithm for optimization of the implementation. Finally, a proof-of-concept ASIC chip is realized that integrates many of the proposed techniques. We are able to achieve a 3.7x improvement in the information throughput and 23.8x improvement in the energy efficiency over prior state-of-the-art, without sacrificing the strong error correcting capabilities of the NB-LDPC code.