Due to the low error tolerance of a qubit, detecting and correcting errors on it is essential for fault-tolerant quantum computing. Surface code (SC) associated with its decoding algorithm is one of the most promising quantum error correction (QEC) methods. QEC needs to be very power-efficient since the power budget is limited inside of a dilution refrigerator for superconducting qubits by which one of the most successful quantum computers (QCs) is built. In this paper, we propose an online-QEC algorithm and its hardware implementation with SFQ based superconducting digital circuits. We design a key building block of the proposed hardware with an SFQ cell library and evaluate it by the SPICE-level simulation. Each logic element is composed of about 3000 Josephson junctions and power consumption is about $2.78 \mu \mathrm{W}$ when operating with 2 GHz clock frequency which meets the required decoding speed. Our decoder is simulated on a quantum error simulator for code distances 5 to 13 and achieves a 1.0% accuracy threshold.
Due to the low error tolerance of a qubit, detecting and correcting errors on it is essential for fault-tolerant quantum computing. Surface code (SC) associated with its decoding algorithm is one of the most promising quantum error correction (QEC) methods. QEC needs to be very power-efficient since the power budget is limited inside of a dilution refrigerator for superconducting qubits by which one of the most successful quantum computers (QCs) is built. In this paper, we propose an online-QEC algorithm and its hardware implementation with SFQ based superconducting digital circuits. We design a key building block of the proposed hardware with an SFQ cell library and evaluate it by the SPICE-level simulation. Each logic element is composed of about 3000 Josephson junctions and power consumption is about 2.78μW when operating with 2 GHz clock frequency which meets the required decoding speed. Our decoder is simulated on a quantum error simulator for code distances 5 to 13 and achieves a 1.0% accuracy threshold.
Quantum error correction (QEC) is essential for quantum computing to mitigate the effect of errors on qubits, and surface code (SC) is one of the most promising QEC methods. Decoding SCs is the most computational expensive task in the control device of quantum computers (QCs), and many works focus on accurate decoding algorithms for SCs, including ones with neural networks (NNs). Practical QCs also require low-latency decoding because slow decoding leads to the accumulation of errors on qubits, resulting in logical failures. For QCs with superconducting qubits, a practical decoder must be very power-efficient in addition to having high accuracy and low latency. In order to reduce the hardware complexity of QC, we are supposed to decode SCs in a cryogenic environment with a limited power budget, where superconducting qubits operate. In this paper, we propose an NN-based accurate, fast, and low-power decoder capable of decoding SCs and lattice surgery (LS) operations with measurement errors on ancillary qubits. To achieve both accuracy and hardware efficiency of the SC decoder, we apply a binarized NN. We design a neural processing unit (NPU) for the decoder with SFQ-based digital circuits and evaluate it with a SPICE-level simulation. We evaluate the decoder performance by a quantum error simulator for the single logical qubit protection and the minimum operation of LS with code distances up to 13, and it achieves 2.5% and 1.0% accuracy thresholds, respectively.
Due to the high error rate of a qubit, detecting and correcting errors on it is essential for fault-tolerant quantum computing (FTQC). Surface code (SC) associated with its decoding algorithm is one of the most promising quantum error correction (QEC) methods because it has high fidelity and requires only nearest neighbor qubits connectivity. To realize FTQC, we need a decoder circuit capable of not only QEC in a 3-D lattice to deal with errors in measurement on ancillary qubits but also quantum operations on logically constructed qubits. Whereas several methods to perform logical operations on SC, such as lattice surgery (LS), are known, no practical decoders supporting them have been proposed yet.One of the most promising QC implementations today is made up of superconducting qubits that are located in a cryogenic environment. To reduce the hardware complexity of QC and latency of QEC, we are supposed to perform QEC in a cryogenic environment. Hence a power-efficient decoder is required due to the limited power budget inside a dilution refrigerator.In this paper, we propose an online-QEC algorithm that supports LS with a practical decoder circuit, as well as a new FTQC architecture. We design a key building block of the proposed architecture with a hybrid of SFQ- and Cryo-CMOS-based digital circuits and evaluate it with a SPICE-level simulation. Each logic element includes about 2400 Josephson junctions, and power consumption is estimated to be 2.07 μW when operating with a 2 GHz clock frequency. We evaluate the decoder performance by a quantum error simulator for an essential operation of LS with code distances up to 11, and it achieves a 0.6% accuracy threshold. In an LS-based architecture further supporting a magic-state distillation protocol, which is expected to run for near-term universal quantum computing, we evaluate the QEC performance and power consumption of the architecture and show that it is practical to be operated in 4-K temperature region of a dilution refrigerator.
Current quantum processors are fragile, noisy and fairly limited in both quantity and quality with tens of qubits and physical error rates of around 10^-3. To realize practical quantum applications, however, error rates need to be below 10^-15 across millions of qubits. To bridge this gap and fully harness the potential of quantum computers, quantum error correction (QEC) is essential. QEC codes are designed to protect quantum information by redundantly encoding it onto multiple physical qubits. This encoding allows for the detection and correction of local errors affecting individual qubits, e.g., through stabilizer measurements. Importantly, if the physical error rates are below a specific threshold, QEC codes can exponentially suppress logical error rates by increasing the number of physical qubits involved. This is essential for achieving fault-tolerant computations, which are key to unlocking the full potential of quantum computers. The work presented in this thesis focuses on the implementation and optimization of small-scale QEC experiments using the surface code and flux-tunable superconducting qubits (Transmons). It addresses several key challenges: enhancing two-qubit gate fidelity in Surface-4 (Chapter 2), implementing an error-detection code with Surface-7 (Chapter 3), automating the calibration and benchmarking of the building blocks in Surface-17 (Chapter 4), reducing leakage into higher excited states with leakage reduction units (Chapter 5), assessing and enhancing the performance of logical qubits (Chapters 7 and 8).
Quantum error correction (QEC) is essential for achieving low error rates required for fault-tolerant quantum computation. In stabilizer-based codes such as the surface code, errors are inferred from repeated syndrome measurements and corrected by a classical decoder. To prevent error accumulation, decoding must be performed with both high throughput and low latency to keep pace with the QEC cycle and enable real-time feedback for universal logical operations. Here we report a hardware-integrated control architecture featuring an FPGA-based neural-network (NN) decoder and experimentally demonstrate real-time surface-code (distance-3) QEC on a superconducting quantum processor. The system achieves a deterministic closed-loop latency of 550 ns, including 124 ns for NN decoding, enabling feedback corrections within a 1.25 us QEC cycle. We show that real-time decoding and feedback correction achieve logical performance comparable to offline decoding while maintaining robustness against varying error conditions. We further demonstrate mid-circuit feedback correction in non-Clifford logical circuits, where Pauli-frame updating alone becomes insufficient. Our results establish a low-latency hardware architecture for embedded QEC control and provide a pathway towards scalable fault-tolerant quantum computing systems.
Real-time Quantum Error Correction (QEC) for Fault-Tolerant Quantum Computing (FTQC) demands immediate surface code decoding with both high accuracy and low latency. The highly accurate Union-Find (UF) algorithm has traditionally been limited to batch-processing, as its iterative cluster growth is incompatible with the concurrent initiation of decoding with each syndrome measurement round, required for real-time QEC. This research presents a novel online UF decoder microarchitecture designed to overcome these limitations. Our key innovation decomposes UF cluster growth into incremental, per-cycle steps managed by a dedicated SHIFT stage. ASIC evaluation of our implementation demonstrates a102.38ns latency for a surface code with a distance of 23 and an approximate 1.4% threshold, meeting critical QEC performance targets. By demonstrating a viable online UF decoder with competitive performance, this research offers a crucial building block for the practical realization of scalable FTQC.
Quantum computers are growing in size, and design decisions are being made now that attempt to squeeze more computation out of these machines. In this spirit, we design a method to boost the computational power of nearterm quantum computers by adapting protocols used in quantum error correction to implement “Approximate Quantum Error Correction (AQEC):” By approximating fully-fledged error correction mechanisms, we can increase the compute volume (qubits × gates, or “Simple Quantum Volume (SQV)”) of near-term machines. The crux of our design is a fast hardware decoder that can approximately decode detected error syndromes rapidly. Specifically, we demonstrate a proof-of-concept that approximate error decoding can be accomplished online in near-term quantum systems by designing and implementing a novel algorithm in superconducting Single Flux Quantum (SFQ) logic technology. This avoids a critical decoding backlog, hidden in all offline decoding schemes, that leads to idle time exponential in the number of T gates in a program [58]. Our design utilizes one SFQ processing module per physical quantum bit. Employing state-of-the-art SFQ synthesis tools, we show that the circuit area, power, and latency are within the constraints of typical, contemporary quantum system designs. Under a pure dephasing error model, the proposed accelerator and AQEC solution is able to expand SQV by factors between 3,402 and 11,163 on expected near-term machines. The decoder achieves a 5% accuracy threshold as well as pseudo-thresholds of approximately 5%, 4.75%, 4.5%, and 3.5% physical error rates for code distances 3, 5, 7, and 9, respectively. Decoding solutions are achieved in a maximum of $\sim$20 nanoseconds on the largest code distances studied. By avoiding the exponential idle time in offline decoders, we achieve a 10x reduction in required code distances to achieve the same logical performance as alternative designs.