Quantum error correction (QEC) is essential for achieving low error rates required for fault-tolerant quantum computation. In stabilizer-based codes such as the surface code, errors are inferred from repeated syndrome measurements and corrected by a classical decoder. To prevent error accumulation, decoding must be performed with both high throughput and low latency to keep pace with the QEC cycle and enable real-time feedback for universal logical operations. Here we report a hardware-integrated control architecture featuring an FPGA-based neural-network (NN) decoder and experimentally demonstrate real-time surface-code (distance-3) QEC on a superconducting quantum processor. The system achieves a deterministic closed-loop latency of 550 ns, including 124 ns for NN decoding, enabling feedback corrections within a 1.25 us QEC cycle. We show that real-time decoding and feedback correction achieve logical performance comparable to offline decoding while maintaining robustness against varying error conditions. We further demonstrate mid-circuit feedback correction in non-Clifford logical circuits, where Pauli-frame updating alone becomes insufficient. Our results establish a low-latency hardware architecture for embedded QEC control and provide a pathway towards scalable fault-tolerant quantum computing systems.
Quantum error correction (QEC) is essential for achieving low error rates required for fault-tolerant quantum computation. In stabilizer-based codes such as the surface code, errors are inferred from repeated syndrome measurements and corrected by a classical decoder. To prevent error accumulation, decoding must be performed with both high throughput and low latency to keep pace with the QEC cycle and enable real-time feedback for universal logical operations. Here we report a hardware-integrated control architecture featuring an FPGA-based neural-network (NN) decoder and experimentally demonstrate real-time surface-code (distance-3) QEC on a superconducting quantum processor. The system achieves a deterministic closed-loop latency of 550 ns, including 124 ns for NN decoding, enabling feedback corrections within a 1.25 us QEC cycle. We show that real-time decoding and feedback correction achieve logical performance comparable to offline decoding while maintaining robustness against varying error conditions. We further demonstrate mid-circuit feedback correction in non-Clifford logical circuits, where Pauli-frame updating alone becomes insufficient. Our results establish a low-latency hardware architecture for embedded QEC control and provide a pathway towards scalable fault-tolerant quantum computing systems.
Quantum error correction (QEC) is essential for realizing large-scale, fault-tolerant quantum computation, yet its practical implementation remains a major engineering challenge. In particular, QEC demands precise real-time control of a large number of qubits and low-latency, high-throughput and accurate decoding of error syndromes. While most prior work has focused primarily on decoder design, the overall performance of any QEC system depends critically on all its subsystems including control, communication, and decoding, as well as their integration.
To address this challenge, we present an open-source, fully integrated QEC system built on RISC-Q, a generator for RISC-V-based quantum control architectures. Implemented on RFSoC FPGAs, our system prototype integrates real-time qubit control, a scalable distributed multi-board architecture, and the state-of-the-art hardware QEC decoder within a low-latency, high-throughput decoding pipeline, forming a complete hardware platform ready for deployment with superconducting qubits.
Experimental evaluation on a three-board prototype based on AMD ZCU216 RFSoCs demonstrates an end-to-end QEC decoding-feedback latency of 446 ns for a distance-3 surface code, including syndrome aggregation, network communication, syndrome decoding, and error distribution. Extrapolating from measured subsystem performance and state-of-the-art decoder benchmarks, the architecture can achieve sub-microsecond decoding-feedback latency up to a distance-21 surface code ($\sim$881 physical qubits) when scaled to larger hardware configurations.
Fault-tolerant quantum computation critically depends on the ability to detect and correct physical qubit errors faster than they accumulate. The surface code (SC) has emerged as the most experimentally promising quantum error correction (QEC) framework due to its high threshold and local stabilizer structure, yet its practical performance is bottlenecked by decoder efficiency. Traditional decoding approaches such as minimum-weight perfect matching (MWPM) achieve near-optimal accuracy under independent noise but struggle with correlated errors, circuit-level noise, and real-time latency constraints. This paper investigates how neural network (NN)-based decoders reduce logical error rates in SC quantum systems by learning complex syndrome-to-correction mappings from data. We propose a hybrid convolutional-recurrent neural architecture that processes stabilizer measurement syndromes across both spatial and temporal dimensions, enabling the decoder to capture correlated error patterns inherent in realistic hardware. Systematic simulations under depolarizing, biased, and circuit-level noise models demonstrate that the proposed neural decoder achieves a logical error rate reduction of up to 41.3% compared to MWPM at a physical error rate of p = 0.008, while maintaining sub-millisecond decoding latency compatible with superconducting qubit cycle times. These results establish that data-driven neural decoders represent a scalable and hardware-compatible pathway toward achieving the logical error rates required for practical fault-tolerant quantum computing.
Quantum computers can solve selected problems more efficiently than classical computers, but current devices are limited by high physical error rates. Quantum Error Correction (QEC) mitigates this by encoding many physical qubits into a logical qubit, with the surface code among the most widely studied approaches. Since syndrome measurements are produced continuously, the decoder must process them fast enough to avoid becoming a system bottleneck, making real-time decoding essential for fault-tolerant quantum computing. While most state-of-the-art real-time decoders rely on Minimum-Weight Perfect Matching (MWPM), we instead use a high-accuracy Graph Neural Network (GNN) that trades higher computational cost for lower logical error rates. To make this GNN practical for real-time decoding, we apply algorithm-hardware co-design. We reduce complexity through hardware-guided pruning and retraining, producing two hardware-friendly models that reduce parameter count by 3.1× and 6.5×. These target, respectively, an average decoding latency of one syndrome cycle and a worst-case latency within one syndrome cycle. We further reduce hardware cost using input-graph filtering and post-training quantization. Based on these optimized models, we propose an FPGA-based architecture for low-latency inference and real-time decoding. Evaluated on surface codes up to distance 7 under circuit-level noise at physical error rate p=10−3, our decoder outperforms MWPM in decoding accuracy for both average-latency and max-latency settings. It reduces logical error rate by 40% at 1μs average latency, and by 13% under a strict 1μs deadline.
Quantum error correction (QEC) is transitioning from physical feasibility demonstrations to systems engineering challenges. Google has achieved below-threshold performance on distance-5/7 surface codes, while Riverlane and Rigetti have demonstrated hardware-integrated low-latency feedback loops. These milestones indicate that the core challenge of real-time decoding has shifted from algorithmic capability to system-level engineering. However, a substantial engineering gap remains between laboratory demonstrations and scalable fault-tolerant quantum computing (FTQC). This white paper addresses three questions: (1) Where are the real bottlenecks in real-time QEC: beyond average decoder speed, the constraints lie in QEC round time, tail latency, and end-to-end data path coordination; (2) How mature are mainstream decoder algorithms: we benchmark the major decoders for both surface codes and quantum low-density parity-check (qLDPC) codes, evaluating their real-time readiness; (3) What system stack do we propose: a six-layer reference architecture from syndrome acquisition to logical operations, with interface definitions and latency budget models. Our results quantify the gap between current decoder performance and real-time requirements, and identify the architectural choices needed to close it.
Quantum error correction (QEC) is indispensable for building scalable fault-tolerant quantum computers. Effective QEC demands stringent real-time decoding: the decoder must process syndrome measurements and determine corrections within a time scale--typically on the order of microseconds, to avoid data backlog. Scaling to large number of logical qubits further necessitates significant computational resources. In this work, we propose an architecture, called \emph{THQLink}, for real-time decoding of quantum error correction codes using high-performance computing (HPC) resources. The network connecting the HPC and the control system of quantum processing unit (QPU) is built on TH-Express and can be adapted to different quantum technologies and their associated control stacks. We report a round-trip latency of 2.944 μs on average, with an incremental overhead of 130 ns per additional hop. Using a parallel window strategy, we demonstrate real-time decoding (1 μs per QEC round) of the surface code up to distance 19 using a matching-based decoder on CPUs. Our work presents a scalable framework for real-time decoding in fault-tolerant quantum computing. It can be readily applied to quantum-centric supercomputers that feature tight integration between QPU and HPC resources, thereby enabling efficient support for hybrid quantum-classical algorithms and computation-intensive workloads offloaded from the QPU.
Quantum error correction (QEC) is essential for scalable quantum computing. However, it requires classical decoders that are fast and accurate enough to keep pace with quantum hardware. While quantum low-density parity-check codes have recently emerged as a promising route to efficient fault tolerance, current decoding algorithms do not allow one to realize the full potential of these codes in practical settings. Here, we introduce a convolutional neural network decoder that exploits the geometric structure of QEC codes, and use it to probe a novel "waterfall" regime of error suppression, demonstrating that the logical error rates required for large-scale fault-tolerant algorithms are attainable with modest code sizes at current physical error rates, and with latencies within the real-time budgets of several leading hardware platforms. For example, for the [144,12,12] Gross code, the decoder achieves logical error rates up to ∼17x below existing decoders - reaching logical error rates ∼10−10 at physical error p=0.1% - with 3-5 orders of magnitude higher throughput. This decoder also produces well-calibrated confidence estimates that can significantly reduce the time overhead of repeat-until-success protocols. Taken together, these results suggest that the space-time costs associated with fault-tolerant quantum computation may be significantly lower than previously anticipated.