Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2603.16203

A Scalable Open-Source QEC System with Sub-Microsecond Decoding-Feedback Latency

Junyi Liu, Yi Lee, Yilun Xu, Gang Huang, Xiaodi Wu

quant-phcs.ARSubmitted Mar 17, 2026• Announced Mar 18, 2026• 0 citations
arXivHTMLPDF

Abstract

Quantum error correction (QEC) is essential for realizing large-scale, fault-tolerant quantum computation, yet its practical implementation remains a major engineering challenge. In particular, QEC demands precise real-time control of a large number of qubits and low-latency, high-throughput and accurate decoding of error syndromes. While most prior work has focused primarily on decoder design, the overall performance of any QEC system depends critically on all its subsystems including control, communication, and decoding, as well as their integration. To address this challenge, we present an open-source, fully integrated QEC system built on RISC-Q, a generator for RISC-V-based quantum control architectures. Implemented on RFSoC FPGAs, our system prototype integrates real-time qubit control, a scalable distributed multi-board architecture, and the state-of-the-art hardware QEC decoder within a low-latency, high-throughput decoding pipeline, forming a complete hardware platform ready for deployment with superconducting qubits. Experimental evaluation on a three-board prototype based on AMD ZCU216 RFSoCs demonstrates an end-to-end QEC decoding-feedback latency of 446 ns for a distance-3 surface code, including syndrome aggregation, network communication, syndrome decoding, and error distribution. Extrapolating from measured subsystem performance and state-of-the-art decoder benchmarks, the architecture can achieve sub-microsecond decoding-feedback latency up to a distance-21 surface code ($\sim$881 physical qubits) when scaled to larger hardware configurations.

Related papers

Real-time Surface-Code Error Correction Using an FPGA-based Neural-Network Decoder

Xiaohan Yang, Xuandong Sun, Zhiyi Wu +9 more

Quantum error correction (QEC) is essential for achieving low error rates required for fault-tolerant quantum computation. In stabilizer-based codes such as the surface code, errors are inferred from repeated syndrome measurements and corrected by a classical decoder. To prevent error accumulation, decoding must be performed with both high throughput and low latency to keep pace with the QEC cycle and enable real-time feedback for universal logical operations. Here we report a hardware-integrated control architecture featuring an FPGA-based neural-network (NN) decoder and experimentally demonstrate real-time surface-code (distance-3) QEC on a superconducting quantum processor. The system achieves a deterministic closed-loop latency of 550 ns, including 124 ns for NN decoding, enabling feedback corrections within a 1.25 us QEC cycle. We show that real-time decoding and feedback correction achieve logical performance comparable to offline decoding while maintaining robustness against varying error conditions. We further demonstrate mid-circuit feedback correction in non-Clifford logical circuits, where Pauli-frame updating alone becomes insufficient. Our results establish a low-latency hardware architecture for embedded QEC control and provide a pathway towards scalable fault-tolerant quantum computing systems.

quant-pharXiv:2605.04892•May 7, 2026•0 citations

Real-Time Quantum Error Correction System Stack: Architecture, Algorithms, and Engineering Practice

Yaojian Chen, Chun-Yang Luan, Peilin Zheng +7 more

Quantum error correction (QEC) is transitioning from physical feasibility demonstrations to systems engineering challenges. Google has achieved below-threshold performance on distance-5/7 surface codes, while Riverlane and Rigetti have demonstrated hardware-integrated low-latency feedback loops. These milestones indicate that the core challenge of real-time decoding has shifted from algorithmic capability to system-level engineering. However, a substantial engineering gap remains between laboratory demonstrations and scalable fault-tolerant quantum computing (FTQC). This white paper addresses three questions: (1) Where are the real bottlenecks in real-time QEC: beyond average decoder speed, the constraints lie in QEC round time, tail latency, and end-to-end data path coordination; (2) How mature are mainstream decoder algorithms: we benchmark the major decoders for both surface codes and quantum low-density parity-check (qLDPC) codes, evaluating their real-time readiness; (3) What system stack do we propose: a six-layer reference architecture from syndrome acquisition to logical operations, with interface definitions and latency budget models. Our results quantify the gap between current decoder performance and real-time requirements, and identify the architectural choices needed to close it.

quant-pharXiv:2605.30765•Jun 1, 2026•0 citations

Real-time decoding of quantum error correction codes using high-performance computing

Lingling Lao, Qiang Wang, Yuanqi Liu +10 more

Quantum error correction (QEC) is indispensable for building scalable fault-tolerant quantum computers. Effective QEC demands stringent real-time decoding: the decoder must process syndrome measurements and determine corrections within a time scale--typically on the order of microseconds, to avoid data backlog. Scaling to large number of logical qubits further necessitates significant computational resources. In this work, we propose an architecture, called \emph{THQLink}, for real-time decoding of quantum error correction codes using high-performance computing (HPC) resources. The network connecting the HPC and the control system of quantum processing unit (QPU) is built on TH-Express and can be adapted to different quantum technologies and their associated control stacks. We report a round-trip latency of 2.944 $μ$s on average, with an incremental overhead of 130 ns per additional hop. Using a parallel window strategy, we demonstrate real-time decoding (1 $μ$s per QEC round) of the surface code up to distance 19 using a matching-based decoder on CPUs. Our work presents a scalable framework for real-time decoding in fault-tolerant quantum computing. It can be readily applied to quantum-centric supercomputers that feature tight integration between QPU and HPC resources, thereby enabling efficient support for hybrid quantum-classical algorithms and computation-intensive workloads offloaded from the QPU.

quant-pharXiv:2608.03948•Aug 5, 2026•0 citations

Rethink the Role of Neural Decoders in Quantum Error Correction

Ge Yan, Shanchuan Li, Yuxuan Du

Quantum error correction (QEC) is essential for enabling quantum advantages, with decoding as a central algorithmic primitive. Owing to its importance and intrinsic difficulty, substantial effort has been made to QEC decoder design, among which neural decoders have recently emerged as a promising data-driven paradigm. Despite this progress, practical deployment remains hindered by a fundamental accuracy-latency tradeoff, often on the microsecond timescale. To address this challenge, here we revisit neural decoders for surface-code decoding under explicit accuracy-latency constraints, considering code distances up to d=9 (161 physical qubits). We unify and redesign representative neural decoders into five architectural paradigms and develop an end-to-end compression pipeline to evaluate their deployability and performance on FPGA hardware. Through systematic experiments, we reveal several previously underexplored insights: (i) near-term decoding performance is driven more by data scale than architectural complexity; (ii) appropriate inductive bias is essential for achieving high decoding accuracy; and (iii) INT4 quantization is a prerequisite for meeting microsecond-scale latency requirements on FPGAs. Together, these findings provide concrete guidance toward scalable and real-time neural QEC decoding.

quant-pharXiv:2605.12046•May 13, 2026•0 citations

Low Latency GNN Accelerator for Quantum Error Correction

Alessio Cicero, Luigi Altamura, Moritz Lange +2 more

Quantum computers can solve selected problems more efficiently than classical computers, but current devices are limited by high physical error rates. Quantum Error Correction (QEC) mitigates this by encoding many physical qubits into a logical qubit, with the surface code among the most widely studied approaches. Since syndrome measurements are produced continuously, the decoder must process them fast enough to avoid becoming a system bottleneck, making real-time decoding essential for fault-tolerant quantum computing. While most state-of-the-art real-time decoders rely on Minimum-Weight Perfect Matching (MWPM), we instead use a high-accuracy Graph Neural Network (GNN) that trades higher computational cost for lower logical error rates. To make this GNN practical for real-time decoding, we apply algorithm-hardware co-design. We reduce complexity through hardware-guided pruning and retraining, producing two hardware-friendly models that reduce parameter count by $3.1\times$ and $6.5\times$. These target, respectively, an average decoding latency of one syndrome cycle and a worst-case latency within one syndrome cycle. We further reduce hardware cost using input-graph filtering and post-training quantization. Based on these optimized models, we propose an FPGA-based architecture for low-latency inference and real-time decoding. Evaluated on surface codes up to distance 7 under circuit-level noise at physical error rate $p=10^{-3}$, our decoder outperforms MWPM in decoding accuracy for both average-latency and max-latency settings. It reduces logical error rate by 40% at $1μs$ average latency, and by 13% under a strict $1μs$ deadline.

quant-pharXiv:2603.22149•Mar 24, 2026•0 citations

Demonstrating real-time and low-latency quantum error correction with superconducting qubits

Laura Caune, Luka Skorić, Nick S. Blunt +22 more

Quantum error correction will be essential for quantum computers to realise their full potential. As quantum computers advance towards demonstrating a universal fault-tolerant logical gate set, implementing scalable and low-latency real-time decoding will be crucial to avoid an exponential slowdown and maintain a fast logical clock rate. Here, we demonstrate low-latency feedback with a scalable FPGA decoder integrated into the control system of a superconducting quantum processor. We perform an 8-qubit stability experiment with up to 25 decoding rounds and a sub-microsecond mean decoding time per round, providing strong evidence that the backlog problem will be avoided when the decoder is operated as a streaming decoder on a superconducting hardware with the strictest speed requirements. We observe logical error suppression as the number of decoding rounds is increased. We also implement and time a fast-feedback experiment demonstrating a decoding response time of 9.6 μs for a total of 9 measurement rounds.

arXiv:2410.05202•Nature Communications•Jun 1, 2026•12 citations
Quantum error correction (QEC) is essential for realizing large-scale, fault-tolerant quantum computation, yet its practical implementation remains a major engineering challenge. In particular, QEC demands precise real-time control of a large number of qubits and low-latency, high-throughput and accurate decoding of error syndromes. While most prior work has focused primarily on decoder design, the overall performance of any QEC system depends critically on all its subsystems including control, communication, and decoding, as well as their integration.
To address this challenge, we present an open-source, fully integrated QEC system built on RISC-Q, a generator for RISC-V-based quantum control architectures. Implemented on RFSoC FPGAs, our system prototype integrates real-time qubit control, a scalable distributed multi-board architecture, and the state-of-the-art hardware QEC decoder within a low-latency, high-throughput decoding pipeline, forming a complete hardware platform ready for deployment with superconducting qubits.
Experimental evaluation on a three-board prototype based on AMD ZCU216 RFSoCs demonstrates an end-to-end QEC decoding-feedback latency of 446 ns for a distance-3 surface code, including syndrome aggregation, network communication, syndrome decoding, and error distribution. Extrapolating from measured subsystem performance and state-of-the-art decoder benchmarks, the architecture can achieve sub-microsecond decoding-feedback latency up to a distance-21 surface code (∼\sim∼881 physical qubits) when scaled to larger hardware configurations.
Quantum error correction (QEC) is essential for achieving low error rates required for fault-tolerant quantum computation. In stabilizer-based codes such as the surface code, errors are inferred from repeated syndrome measurements and corrected by a classical decoder. To prevent error accumulation, decoding must be performed with both high throughput and low latency to keep pace with the QEC cycle and enable real-time feedback for universal logical operations. Here we report a hardware-integrated control architecture featuring an FPGA-based neural-network (NN) decoder and experimentally demonstrate real-time surface-code (distance-3) QEC on a superconducting quantum processor. The system achieves a deterministic closed-loop latency of 550 ns, including 124 ns for NN decoding, enabling feedback corrections within a 1.25 us QEC cycle. We show that real-time decoding and feedback correction achieve logical performance comparable to offline decoding while maintaining robustness against varying error conditions. We further demonstrate mid-circuit feedback correction in non-Clifford logical circuits, where Pauli-frame updating alone becomes insufficient. Our results establish a low-latency hardware architecture for embedded QEC control and provide a pathway towards scalable fault-tolerant quantum computing systems.
Quantum error correction (QEC) is transitioning from physical feasibility demonstrations to systems engineering challenges. Google has achieved below-threshold performance on distance-5/7 surface codes, while Riverlane and Rigetti have demonstrated hardware-integrated low-latency feedback loops. These milestones indicate that the core challenge of real-time decoding has shifted from algorithmic capability to system-level engineering. However, a substantial engineering gap remains between laboratory demonstrations and scalable fault-tolerant quantum computing (FTQC). This white paper addresses three questions: (1) Where are the real bottlenecks in real-time QEC: beyond average decoder speed, the constraints lie in QEC round time, tail latency, and end-to-end data path coordination; (2) How mature are mainstream decoder algorithms: we benchmark the major decoders for both surface codes and quantum low-density parity-check (qLDPC) codes, evaluating their real-time readiness; (3) What system stack do we propose: a six-layer reference architecture from syndrome acquisition to logical operations, with interface definitions and latency budget models. Our results quantify the gap between current decoder performance and real-time requirements, and identify the architectural choices needed to close it.
Quantum error correction (QEC) is indispensable for building scalable fault-tolerant quantum computers. Effective QEC demands stringent real-time decoding: the decoder must process syndrome measurements and determine corrections within a time scale--typically on the order of microseconds, to avoid data backlog. Scaling to large number of logical qubits further necessitates significant computational resources. In this work, we propose an architecture, called \emph{THQLink}, for real-time decoding of quantum error correction codes using high-performance computing (HPC) resources. The network connecting the HPC and the control system of quantum processing unit (QPU) is built on TH-Express and can be adapted to different quantum technologies and their associated control stacks. We report a round-trip latency of 2.944 μμμs on average, with an incremental overhead of 130 ns per additional hop. Using a parallel window strategy, we demonstrate real-time decoding (1 μμμs per QEC round) of the surface code up to distance 19 using a matching-based decoder on CPUs. Our work presents a scalable framework for real-time decoding in fault-tolerant quantum computing. It can be readily applied to quantum-centric supercomputers that feature tight integration between QPU and HPC resources, thereby enabling efficient support for hybrid quantum-classical algorithms and computation-intensive workloads offloaded from the QPU.
Quantum error correction (QEC) is essential for enabling quantum advantages, with decoding as a central algorithmic primitive. Owing to its importance and intrinsic difficulty, substantial effort has been made to QEC decoder design, among which neural decoders have recently emerged as a promising data-driven paradigm. Despite this progress, practical deployment remains hindered by a fundamental accuracy-latency tradeoff, often on the microsecond timescale. To address this challenge, here we revisit neural decoders for surface-code decoding under explicit accuracy-latency constraints, considering code distances up to d=9 (161 physical qubits). We unify and redesign representative neural decoders into five architectural paradigms and develop an end-to-end compression pipeline to evaluate their deployability and performance on FPGA hardware. Through systematic experiments, we reveal several previously underexplored insights: (i) near-term decoding performance is driven more by data scale than architectural complexity; (ii) appropriate inductive bias is essential for achieving high decoding accuracy; and (iii) INT4 quantization is a prerequisite for meeting microsecond-scale latency requirements on FPGAs. Together, these findings provide concrete guidance toward scalable and real-time neural QEC decoding.
Quantum computers can solve selected problems more efficiently than classical computers, but current devices are limited by high physical error rates. Quantum Error Correction (QEC) mitigates this by encoding many physical qubits into a logical qubit, with the surface code among the most widely studied approaches. Since syndrome measurements are produced continuously, the decoder must process them fast enough to avoid becoming a system bottleneck, making real-time decoding essential for fault-tolerant quantum computing. While most state-of-the-art real-time decoders rely on Minimum-Weight Perfect Matching (MWPM), we instead use a high-accuracy Graph Neural Network (GNN) that trades higher computational cost for lower logical error rates. To make this GNN practical for real-time decoding, we apply algorithm-hardware co-design. We reduce complexity through hardware-guided pruning and retraining, producing two hardware-friendly models that reduce parameter count by 3.1×3.1\times3.1× and 6.5×6.5\times6.5×. These target, respectively, an average decoding latency of one syndrome cycle and a worst-case latency within one syndrome cycle. We further reduce hardware cost using input-graph filtering and post-training quantization. Based on these optimized models, we propose an FPGA-based architecture for low-latency inference and real-time decoding. Evaluated on surface codes up to distance 7 under circuit-level noise at physical error rate p=10−3p=10^{-3}p=10−3, our decoder outperforms MWPM in decoding accuracy for both average-latency and max-latency settings. It reduces logical error rate by 40% at 1μs1μs1μs average latency, and by 13% under a strict 1μs1μs1μs deadline.
Quantum error correction will be essential for quantum computers to realise their full potential. As quantum computers advance towards demonstrating a universal fault-tolerant logical gate set, implementing scalable and low-latency real-time decoding will be crucial to avoid an exponential slowdown and maintain a fast logical clock rate. Here, we demonstrate low-latency feedback with a scalable FPGA decoder integrated into the control system of a superconducting quantum processor. We perform an 8-qubit stability experiment with up to 25 decoding rounds and a sub-microsecond mean decoding time per round, providing strong evidence that the backlog problem will be avoided when the decoder is operated as a streaming decoder on a superconducting hardware with the strictest speed requirements. We observe logical error suppression as the number of decoding rounds is increased. We also implement and time a fast-feedback experiment demonstrating a decoding response time of 9.6 μs for a total of 9 measurement rounds.