Fault-tolerant quantum computation critically depends on the ability to detect and correct physical qubit errors faster than they accumulate. The surface code (SC) has emerged as the most experimentally promising quantum error correction (QEC) framework due to its high threshold and local stabilizer structure, yet its practical performance is bottlenecked by decoder efficiency. Traditional decoding approaches such as minimum-weight perfect matching (MWPM) achieve near-optimal accuracy under independent noise but struggle with correlated errors, circuit-level noise, and real-time latency constraints. This paper investigates how neural network (NN)-based decoders reduce logical error rates in SC quantum systems by learning complex syndrome-to-correction mappings from data. We propose a hybrid convolutional-recurrent neural architecture that processes stabilizer measurement syndromes across both spatial and temporal dimensions, enabling the decoder to capture correlated error patterns inherent in realistic hardware. Systematic simulations under depolarizing, biased, and circuit-level noise models demonstrate that the proposed neural decoder achieves a logical error rate reduction of up to 41.3% compared to MWPM at a physical error rate of p = 0.008, while maintaining sub-millisecond decoding latency compatible with superconducting qubit cycle times. These results establish that data-driven neural decoders represent a scalable and hardware-compatible pathway toward achieving the logical error rates required for practical fault-tolerant quantum computing.
Fault-tolerant quantum computation critically depends on the ability to detect and correct physical qubit errors faster than they accumulate. The surface code (SC) has emerged as the most experimentally promising quantum error correction (QEC) framework due to its high threshold and local stabilizer structure, yet its practical performance is bottlenecked by decoder efficiency. Traditional decoding approaches such as minimum-weight perfect matching (MWPM) achieve near-optimal accuracy under independent noise but struggle with correlated errors, circuit-level noise, and real-time latency constraints. This paper investigates how neural network (NN)-based decoders reduce logical error rates in SC quantum systems by learning complex syndrome-to-correction mappings from data. We propose a hybrid convolutional-recurrent neural architecture that processes stabilizer measurement syndromes across both spatial and temporal dimensions, enabling the decoder to capture correlated error patterns inherent in realistic hardware. Systematic simulations under depolarizing, biased, and circuit-level noise models demonstrate that the proposed neural decoder achieves a logical error rate reduction of up to 41.3% compared to MWPM at a physical error rate of p = 0.008, while maintaining sub-millisecond decoding latency compatible with superconducting qubit cycle times. These results establish that data-driven neural decoders represent a scalable and hardware-compatible pathway toward achieving the logical error rates required for practical fault-tolerant quantum computing.
Quantum error correction (QEC) is essential for achieving low error rates required for fault-tolerant quantum computation. In stabilizer-based codes such as the surface code, errors are inferred from repeated syndrome measurements and corrected by a classical decoder. To prevent error accumulation, decoding must be performed with both high throughput and low latency to keep pace with the QEC cycle and enable real-time feedback for universal logical operations. Here we report a hardware-integrated control architecture featuring an FPGA-based neural-network (NN) decoder and experimentally demonstrate real-time surface-code (distance-3) QEC on a superconducting quantum processor. The system achieves a deterministic closed-loop latency of 550 ns, including 124 ns for NN decoding, enabling feedback corrections within a 1.25 us QEC cycle. We show that real-time decoding and feedback correction achieve logical performance comparable to offline decoding while maintaining robustness against varying error conditions. We further demonstrate mid-circuit feedback correction in non-Clifford logical circuits, where Pauli-frame updating alone becomes insufficient. Our results establish a low-latency hardware architecture for embedded QEC control and provide a pathway towards scalable fault-tolerant quantum computing systems.
Abstract. Suppressing qubit errors is one of the main challenges in building fault-tolerant quantum computers, requiring quantum error correction to protect fragile quantum information during computation cycles. The surface code is a leading approach because of its high error tolerance and compatibility with realistic hardware, but it requires a decoder that can accurately and quickly use the syndrome measurements to discern whether a logical error has occurred. This study investigates whether a feedforward neural-network can serve as a practical decoder for the surface code under circuit-level noise. Using the Stim software package, this study generates surface code circuits at multiple code distances and physical error rates and compiles them into detector samplers, then trains a PyTorch neural-network to predict whether a logical observable flip occurred from the syndrome data. The neural-network decoder is compared against Minimum-Weight Perfect Matching (MWPM), focusing on metrics including logical error rate and inference speed. The results show that the neural-network decoder performs competitively with MWPM for code distances 3 and 5 and provides inference time advantages at higher physical error rates as its inference time remains relatively constant over increasing physical error rates. However, MWPM outperforms the neural-network at distance 7, suggesting that scalability remains a major limitation for neural-network decoders. These results show that neural-networks are a promising approach for tackling quantum error correction, although future work is still needed to improve these models for real systems at larger code distances.
Quantum computers can solve selected problems more efficiently than classical computers, but current devices are limited by high physical error rates. Quantum Error Correction (QEC) mitigates this by encoding many physical qubits into a logical qubit, with the surface code among the most widely studied approaches. Since syndrome measurements are produced continuously, the decoder must process them fast enough to avoid becoming a system bottleneck, making real-time decoding essential for fault-tolerant quantum computing. While most state-of-the-art real-time decoders rely on Minimum-Weight Perfect Matching (MWPM), we instead use a high-accuracy Graph Neural Network (GNN) that trades higher computational cost for lower logical error rates. To make this GNN practical for real-time decoding, we apply algorithm-hardware co-design. We reduce complexity through hardware-guided pruning and retraining, producing two hardware-friendly models that reduce parameter count by 3.1× and 6.5×. These target, respectively, an average decoding latency of one syndrome cycle and a worst-case latency within one syndrome cycle. We further reduce hardware cost using input-graph filtering and post-training quantization. Based on these optimized models, we propose an FPGA-based architecture for low-latency inference and real-time decoding. Evaluated on surface codes up to distance 7 under circuit-level noise at physical error rate p=10−3, our decoder outperforms MWPM in decoding accuracy for both average-latency and max-latency settings. It reduces logical error rate by 40% at 1μs average latency, and by 13% under a strict 1μs deadline.
Neural decoders for quantum error correction have achieved high accuracy on surface code memory experiments, but practical fault-tolerant computation requires decoders that transfer across devices, noise conditions, and logical operations. We introduce a modular graph-recurrent decoder designed for this setting. Built from reusable local syndrome encoders, it is pretrained in simulation and fine-tuned to hardware using a common pipeline, with only lightweight spatial aggregation adapted between experiments. The decoder performs competitively on conventional memory benchmarks, outperforming minimum-weight perfect matching (MWPM) at distances 3 and 5 on an IBM Nighthawk-generation processor and closely approaching AlphaQubit on Google's below-threshold hardware data. We then test the framework in two settings beyond memory decoding on the same IBM device. First, in an X-type stability experiment, we continuously tune the effective measurement error rate using a variable pre-readout rotation and train a single decoder jointly across the resulting noise range. It matches or outperforms MWPM across the sweep without requiring a separately calibrated decoder for each setting. Second, we decode a ZZ-merge lattice-surgery experiment between two distance-3 surface-code patches, improving the decoded correlation between the merge outcome and the final ZZ parity relative to MWPM on real hardware. Together, these experiments demonstrate neural decoding that is portable not only across hardware, but also across qualitatively different surface code observables and logical operations, using models trainable on single-GPU academic resources.
Quantum error-correcting codes (QECCs) can eliminate the negative effects of quantum noise, the major obstacle to the execution of quantum algorithms. However, realizing practical quantum error correction (QEC) requires resolving many challenges to implement a high-performance real-time decoding system. Many decoding algorithms have been proposed and optimized in the past few decades, of which neural network (NNs) based solutions have drawn an increasing amount of attention due to their high efficiency. Unfortunately, previous works on neural decoders are still at an early stage and have only relatively simple architectures, which makes them unsuitable for practical QEC. In this work, we propose a scalable, fast, and programmable neural decoding system to meet the requirements of FTQEC for rotated surface codes (RSC). Firstly, we propose a hardware-efficient NN decoding algorithm with relatively low complexity and high accuracy. Secondly, we develop a customized hardware decoder with architectural optimizations to reduce latency. Thirdly, our proposed programmable architecture boosts the scalability and flexibility of the decoder by maximizing parallelism. Fourthly, we build an FPGA-based decoding system with integrated control hardware for evaluation. Our L=5 (L is the code distance) decoder achieves an extremely low decoding latency of 197 ns, and the L=7 configuration also requires only 1.136 μs, both taking 2L rounds of syndrome measurements. The accuracy results of our system are close to minimum weight perfect matching (MWPM). Furthermore, our programmable architecture reduces hardware resource consumption by up to 3.0× with only a small latency loss. We validated our approach in real-world scenarios by conducting a proof-of-concept benchmark with practical noise models, including one derived from experimental data gathered from physical hardware.
Quantum Error Correction (QEC) decoding faces a fundamental accuracy-efficiency tradeoff. Classical methods like Minimum Weight Perfect Matching (MWPM) exhibit variable performance across noise models and suffer from polynomial complexity, while tensor network decoders achieve high accuracy but at prohibitively high computational cost. Recent neural decoders reduce complexity but lack the accuracy needed to compete with computationally expensive classical methods. We introduce SAQ-Decoder, a unified framework combining transformer-based learning with constraint aware post-processing that achieves both near Maximum Likelihood (ML) accuracy and linear computational scalability with respect to the syndrome size. Our approach combines a dual-stream transformer architecture that processes syndromes and logical information with asymmetric attention patterns, and a novel differentiable logical loss that directly optimizes Logical Error Rates (LER) through smooth approximations over finite fields. SAQ-Decoder achieves near-optimal performance, with error thresholds of 10.99% (independent noise) and 18.6% (depolarizing noise) on toric codes that approach the ML bounds of 11.0% and 18.9% while outperforming existing neural and classical baselines in accuracy, complexity, and parameter efficiency. Our findings establish that learned decoders can simultaneously achieve competitive decoding accuracy and computational efficiency, addressing key requirements for practical fault-tolerant quantum computing systems.