Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2208.05758

NEO-QEC: Neural Network Enhanced Online Superconducting Decoder for Surface Codes

Yosuke Ueno, Masaaki Kondo, Masamitsu Tanaka, Yasunari Suzuki, Yutaka Tabuchi

Published Aug 11, 2022• 9 citations
arXivHTMLPDF

Abstract

Quantum error correction (QEC) is essential for quantum computing to mitigate the effect of errors on qubits, and surface code (SC) is one of the most promising QEC methods. Decoding SCs is the most computational expensive task in the control device of quantum computers (QCs), and many works focus on accurate decoding algorithms for SCs, including ones with neural networks (NNs). Practical QCs also require low-latency decoding because slow decoding leads to the accumulation of errors on qubits, resulting in logical failures. For QCs with superconducting qubits, a practical decoder must be very power-efficient in addition to having high accuracy and low latency. In order to reduce the hardware complexity of QC, we are supposed to decode SCs in a cryogenic environment with a limited power budget, where superconducting qubits operate. In this paper, we propose an NN-based accurate, fast, and low-power decoder capable of decoding SCs and lattice surgery (LS) operations with measurement errors on ancillary qubits. To achieve both accuracy and hardware efficiency of the SC decoder, we apply a binarized NN. We design a neural processing unit (NPU) for the decoder with SFQ-based digital circuits and evaluate it with a SPICE-level simulation. We evaluate the decoder performance by a quantum error simulator for the single logical qubit protection and the minimum operation of LS with code distances up to 13, and it achieves 2.5% and 1.0% accuracy thresholds, respectively.

DOI
10.48550/arxiv.2208.05758

Related papers

QECOOL: On-Line Quantum Error Correction with a Superconducting Decoder for Surface Code

Yosuke Ueno, Masaaki Kondo, Masamitsu Tanaka +2 more

Due to the low error tolerance of a qubit, detecting and correcting errors on it is essential for fault-tolerant quantum computing. Surface code (SC) associated with its decoding algorithm is one of the most promising quantum error correction (QEC) methods. QEC needs to be very power-efficient since the power budget is limited inside of a dilution refrigerator for superconducting qubits by which one of the most successful quantum computers (QCs) is built. In this paper, we propose an online-QEC algorithm and its hardware implementation with SFQ based superconducting digital circuits. We design a key building block of the proposed hardware with an SFQ cell library and evaluate it by the SPICE-level simulation. Each logic element is composed of about 3000 Josephson junctions and power consumption is about $2.78 \mu \mathrm{W}$ when operating with 2 GHz clock frequency which meets the required decoding speed. Our decoder is simulated on a quantum error simulator for code distances 5 to 13 and achieves a 1.0% accuracy threshold.

arXiv:2103.14209•ACM/IEEE Design Automation Conference (DAC)•Nov 8, 2021•53 citations

Neural Decoders Reduce Logical Error Rates in Surface Code Quantum Systems

Lukas Schneider, Haruki Tanaka

Fault-tolerant quantum computation critically depends on the ability to detect and correct physical qubit errors faster than they accumulate. The surface code (SC) has emerged as the most experimentally promising quantum error correction (QEC) framework due to its high threshold and local stabilizer structure, yet its practical performance is bottlenecked by decoder efficiency. Traditional decoding approaches such as minimum-weight perfect matching (MWPM) achieve near-optimal accuracy under independent noise but struggle with correlated errors, circuit-level noise, and real-time latency constraints. This paper investigates how neural network (NN)-based decoders reduce logical error rates in SC quantum systems by learning complex syndrome-to-correction mappings from data. We propose a hybrid convolutional-recurrent neural architecture that processes stabilizer measurement syndromes across both spatial and temporal dimensions, enabling the decoder to capture correlated error patterns inherent in realistic hardware. Systematic simulations under depolarizing, biased, and circuit-level noise models demonstrate that the proposed neural decoder achieves a logical error rate reduction of up to 41.3% compared to MWPM at a physical error rate of p = 0.008, while maintaining sub-millisecond decoding latency compatible with superconducting qubit cycle times. These results establish that data-driven neural decoders represent a scalable and hardware-compatible pathway toward achieving the logical error rates required for practical fault-tolerant quantum computing.

Frontiers in Applied Physics and Mathematics•Mar 25, 2026•0 citations

Real-time Surface-Code Error Correction Using an FPGA-based Neural-Network Decoder

Xiaohan Yang, Xuandong Sun, Zhiyi Wu +9 more

Quantum error correction (QEC) is essential for achieving low error rates required for fault-tolerant quantum computation. In stabilizer-based codes such as the surface code, errors are inferred from repeated syndrome measurements and corrected by a classical decoder. To prevent error accumulation, decoding must be performed with both high throughput and low latency to keep pace with the QEC cycle and enable real-time feedback for universal logical operations. Here we report a hardware-integrated control architecture featuring an FPGA-based neural-network (NN) decoder and experimentally demonstrate real-time surface-code (distance-3) QEC on a superconducting quantum processor. The system achieves a deterministic closed-loop latency of 550 ns, including 124 ns for NN decoding, enabling feedback corrections within a 1.25 us QEC cycle. We show that real-time decoding and feedback correction achieve logical performance comparable to offline decoding while maintaining robustness against varying error conditions. We further demonstrate mid-circuit feedback correction in non-Clifford logical circuits, where Pauli-frame updating alone becomes insufficient. Our results establish a low-latency hardware architecture for embedded QEC control and provide a pathway towards scalable fault-tolerant quantum computing systems.

quant-pharXiv:2605.04892•May 7, 2026•0 citations

Low Latency GNN Accelerator for Quantum Error Correction

Alessio Cicero, Luigi Altamura, Moritz Lange +2 more

Quantum computers can solve selected problems more efficiently than classical computers, but current devices are limited by high physical error rates. Quantum Error Correction (QEC) mitigates this by encoding many physical qubits into a logical qubit, with the surface code among the most widely studied approaches. Since syndrome measurements are produced continuously, the decoder must process them fast enough to avoid becoming a system bottleneck, making real-time decoding essential for fault-tolerant quantum computing. While most state-of-the-art real-time decoders rely on Minimum-Weight Perfect Matching (MWPM), we instead use a high-accuracy Graph Neural Network (GNN) that trades higher computational cost for lower logical error rates. To make this GNN practical for real-time decoding, we apply algorithm-hardware co-design. We reduce complexity through hardware-guided pruning and retraining, producing two hardware-friendly models that reduce parameter count by $3.1\times$ and $6.5\times$. These target, respectively, an average decoding latency of one syndrome cycle and a worst-case latency within one syndrome cycle. We further reduce hardware cost using input-graph filtering and post-training quantization. Based on these optimized models, we propose an FPGA-based architecture for low-latency inference and real-time decoding. Evaluated on surface codes up to distance 7 under circuit-level noise at physical error rate $p=10^{-3}$, our decoder outperforms MWPM in decoding accuracy for both average-latency and max-latency settings. It reduces logical error rate by 40% at $1μs$ average latency, and by 13% under a strict $1μs$ deadline.

quant-pharXiv:2603.22149•Mar 24, 2026•0 citations

QULATIS: A Quantum Error Correction Methodology toward Lattice Surgery

Yosuke Ueno, Masaaki Kondo, Masamitsu Tanaka +2 more

Due to the high error rate of a qubit, detecting and correcting errors on it is essential for fault-tolerant quantum computing (FTQC). Surface code (SC) associated with its decoding algorithm is one of the most promising quantum error correction (QEC) methods because it has high fidelity and requires only nearest neighbor qubits connectivity. To realize FTQC, we need a decoder circuit capable of not only QEC in a 3-D lattice to deal with errors in measurement on ancillary qubits but also quantum operations on logically constructed qubits. Whereas several methods to perform logical operations on SC, such as lattice surgery (LS), are known, no practical decoders supporting them have been proposed yet.One of the most promising QC implementations today is made up of superconducting qubits that are located in a cryogenic environment. To reduce the hardware complexity of QC and latency of QEC, we are supposed to perform QEC in a cryogenic environment. Hence a power-efficient decoder is required due to the limited power budget inside a dilution refrigerator.In this paper, we propose an online-QEC algorithm that supports LS with a practical decoder circuit, as well as a new FTQC architecture. We design a key building block of the proposed architecture with a hybrid of SFQ- and Cryo-CMOS-based digital circuits and evaluate it with a SPICE-level simulation. Each logic element includes about 2400 Josephson junctions, and power consumption is estimated to be 2.07 μW when operating with a 2 GHz clock frequency. We evaluate the decoder performance by a quantum error simulator for an essential operation of LS with code distances up to 11, and it achieves a 0.6% accuracy threshold. In an LS-based architecture further supporting a magic-state distillation protocol, which is expected to run for near-term universal quantum computing, we evaluate the QEC performance and power consumption of the architecture and show that it is practical to be operated in 4-K temperature region of a dilution refrigerator.

IEEE International Symposium on High-Performance Computer Architecture (HPCA)•Apr 1, 2022•25 citations

Neural-Network Decoders for Quantum Error Correction Using Surface Codes: A Space Exploration of the Hardware Cost-Performance Tradeoffs

Ramon W. J. Overwater, Masoud Babaie, Fabio Sebastiano

Quantum Error Correction (QEC) is required in quantum computers to mitigate the effect of errors on physical qubits. When adopting a QEC scheme based on surface codes, error decoding is the most computationally expensive task in the classical electronic back-end. Decoders employing neural networks (NN) are well-suited for this task but their hardware implementation has not been presented yet. This work presents a space exploration of fully-connected feed-forward NN decoders for small distance surface codes. The goal is to optimize the neural network for high decoding performance, while keeping a minimalistic hardware implementation. This is needed to meet the tight delay constraints of real-time surface code decoding. We demonstrate that hardware based NN-decoders can achieve high decoding performance comparable to other state-of-the-art decoding algorithms whilst being well below the tight delay requirements (440 ns) of current solid-state qubit technologies for both ASIC designs (<30 ns) and FPGA implementations (<90 ns). These results indicate that NN-decoders are viable candidates for further exploration of an integrated hardware implementation in future large-scale quantum computers.

arXiv:2202.05741•IEEE Transactions on Quantum Engineering•Jan 1, 2022•75 citations
Quantum error correction (QEC) is essential for quantum computing to mitigate the effect of errors on qubits, and surface code (SC) is one of the most promising QEC methods. Decoding SCs is the most computational expensive task in the control device of quantum computers (QCs), and many works focus on accurate decoding algorithms for SCs, including ones with neural networks (NNs). Practical QCs also require low-latency decoding because slow decoding leads to the accumulation of errors on qubits, resulting in logical failures. For QCs with superconducting qubits, a practical decoder must be very power-efficient in addition to having high accuracy and low latency. In order to reduce the hardware complexity of QC, we are supposed to decode SCs in a cryogenic environment with a limited power budget, where superconducting qubits operate. In this paper, we propose an NN-based accurate, fast, and low-power decoder capable of decoding SCs and lattice surgery (LS) operations with measurement errors on ancillary qubits. To achieve both accuracy and hardware efficiency of the SC decoder, we apply a binarized NN. We design a neural processing unit (NPU) for the decoder with SFQ-based digital circuits and evaluate it with a SPICE-level simulation. We evaluate the decoder performance by a quantum error simulator for the single logical qubit protection and the minimum operation of LS with code distances up to 13, and it achieves 2.5% and 1.0% accuracy thresholds, respectively.
Due to the low error tolerance of a qubit, detecting and correcting errors on it is essential for fault-tolerant quantum computing. Surface code (SC) associated with its decoding algorithm is one of the most promising quantum error correction (QEC) methods. QEC needs to be very power-efficient since the power budget is limited inside of a dilution refrigerator for superconducting qubits by which one of the most successful quantum computers (QCs) is built. In this paper, we propose an online-QEC algorithm and its hardware implementation with SFQ based superconducting digital circuits. We design a key building block of the proposed hardware with an SFQ cell library and evaluate it by the SPICE-level simulation. Each logic element is composed of about 3000 Josephson junctions and power consumption is about 2.78μW2.78 \mu \mathrm{W}2.78μW when operating with 2 GHz clock frequency which meets the required decoding speed. Our decoder is simulated on a quantum error simulator for code distances 5 to 13 and achieves a 1.0% accuracy threshold.
Fault-tolerant quantum computation critically depends on the ability to detect and correct physical qubit errors faster than they accumulate. The surface code (SC) has emerged as the most experimentally promising quantum error correction (QEC) framework due to its high threshold and local stabilizer structure, yet its practical performance is bottlenecked by decoder efficiency. Traditional decoding approaches such as minimum-weight perfect matching (MWPM) achieve near-optimal accuracy under independent noise but struggle with correlated errors, circuit-level noise, and real-time latency constraints. This paper investigates how neural network (NN)-based decoders reduce logical error rates in SC quantum systems by learning complex syndrome-to-correction mappings from data. We propose a hybrid convolutional-recurrent neural architecture that processes stabilizer measurement syndromes across both spatial and temporal dimensions, enabling the decoder to capture correlated error patterns inherent in realistic hardware. Systematic simulations under depolarizing, biased, and circuit-level noise models demonstrate that the proposed neural decoder achieves a logical error rate reduction of up to 41.3% compared to MWPM at a physical error rate of p = 0.008, while maintaining sub-millisecond decoding latency compatible with superconducting qubit cycle times. These results establish that data-driven neural decoders represent a scalable and hardware-compatible pathway toward achieving the logical error rates required for practical fault-tolerant quantum computing.
Quantum error correction (QEC) is essential for achieving low error rates required for fault-tolerant quantum computation. In stabilizer-based codes such as the surface code, errors are inferred from repeated syndrome measurements and corrected by a classical decoder. To prevent error accumulation, decoding must be performed with both high throughput and low latency to keep pace with the QEC cycle and enable real-time feedback for universal logical operations. Here we report a hardware-integrated control architecture featuring an FPGA-based neural-network (NN) decoder and experimentally demonstrate real-time surface-code (distance-3) QEC on a superconducting quantum processor. The system achieves a deterministic closed-loop latency of 550 ns, including 124 ns for NN decoding, enabling feedback corrections within a 1.25 us QEC cycle. We show that real-time decoding and feedback correction achieve logical performance comparable to offline decoding while maintaining robustness against varying error conditions. We further demonstrate mid-circuit feedback correction in non-Clifford logical circuits, where Pauli-frame updating alone becomes insufficient. Our results establish a low-latency hardware architecture for embedded QEC control and provide a pathway towards scalable fault-tolerant quantum computing systems.
Quantum computers can solve selected problems more efficiently than classical computers, but current devices are limited by high physical error rates. Quantum Error Correction (QEC) mitigates this by encoding many physical qubits into a logical qubit, with the surface code among the most widely studied approaches. Since syndrome measurements are produced continuously, the decoder must process them fast enough to avoid becoming a system bottleneck, making real-time decoding essential for fault-tolerant quantum computing. While most state-of-the-art real-time decoders rely on Minimum-Weight Perfect Matching (MWPM), we instead use a high-accuracy Graph Neural Network (GNN) that trades higher computational cost for lower logical error rates. To make this GNN practical for real-time decoding, we apply algorithm-hardware co-design. We reduce complexity through hardware-guided pruning and retraining, producing two hardware-friendly models that reduce parameter count by 3.1×3.1\times3.1× and 6.5×6.5\times6.5×. These target, respectively, an average decoding latency of one syndrome cycle and a worst-case latency within one syndrome cycle. We further reduce hardware cost using input-graph filtering and post-training quantization. Based on these optimized models, we propose an FPGA-based architecture for low-latency inference and real-time decoding. Evaluated on surface codes up to distance 7 under circuit-level noise at physical error rate p=10−3p=10^{-3}p=10−3, our decoder outperforms MWPM in decoding accuracy for both average-latency and max-latency settings. It reduces logical error rate by 40% at 1μs1μs1μs average latency, and by 13% under a strict 1μs1μs1μs deadline.
Due to the high error rate of a qubit, detecting and correcting errors on it is essential for fault-tolerant quantum computing (FTQC). Surface code (SC) associated with its decoding algorithm is one of the most promising quantum error correction (QEC) methods because it has high fidelity and requires only nearest neighbor qubits connectivity. To realize FTQC, we need a decoder circuit capable of not only QEC in a 3-D lattice to deal with errors in measurement on ancillary qubits but also quantum operations on logically constructed qubits. Whereas several methods to perform logical operations on SC, such as lattice surgery (LS), are known, no practical decoders supporting them have been proposed yet.One of the most promising QC implementations today is made up of superconducting qubits that are located in a cryogenic environment. To reduce the hardware complexity of QC and latency of QEC, we are supposed to perform QEC in a cryogenic environment. Hence a power-efficient decoder is required due to the limited power budget inside a dilution refrigerator.In this paper, we propose an online-QEC algorithm that supports LS with a practical decoder circuit, as well as a new FTQC architecture. We design a key building block of the proposed architecture with a hybrid of SFQ- and Cryo-CMOS-based digital circuits and evaluate it with a SPICE-level simulation. Each logic element includes about 2400 Josephson junctions, and power consumption is estimated to be 2.07 μW when operating with a 2 GHz clock frequency. We evaluate the decoder performance by a quantum error simulator for an essential operation of LS with code distances up to 11, and it achieves a 0.6% accuracy threshold. In an LS-based architecture further supporting a magic-state distillation protocol, which is expected to run for near-term universal quantum computing, we evaluate the QEC performance and power consumption of the architecture and show that it is practical to be operated in 4-K temperature region of a dilution refrigerator.
Quantum Error Correction (QEC) is required in quantum computers to mitigate the effect of errors on physical qubits. When adopting a QEC scheme based on surface codes, error decoding is the most computationally expensive task in the classical electronic back-end. Decoders employing neural networks (NN) are well-suited for this task but their hardware implementation has not been presented yet. This work presents a space exploration of fully-connected feed-forward NN decoders for small distance surface codes. The goal is to optimize the neural network for high decoding performance, while keeping a minimalistic hardware implementation. This is needed to meet the tight delay constraints of real-time surface code decoding. We demonstrate that hardware based NN-decoders can achieve high decoding performance comparable to other state-of-the-art decoding algorithms whilst being well below the tight delay requirements (440 ns) of current solid-state qubit technologies for both ASIC designs (<30 ns) and FPGA implementations (<90 ns). These results indicate that NN-decoders are viable candidates for further exploration of an integrated hardware implementation in future large-scale quantum computers.