© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

arXiv:1901.00922 · Optics Letters

Infrared laser locking to a rubidium saturated absorption spectrum via a photonic chip frequency doubler

Jiacheng Xie, Jia-Qi Wang, Zhu-Bo Wang, Xinxin Hu, Xiang Guo, Rui Niu, Joshua B. Surya, Ji-Zhe Zhang, Chun‐Hua Dong, Guang‐Can Guo, Hong X. Tang, Chang‐Ling Zou

Published Feb 19, 2019• 10 citations

Abstract

To extend the coherence of quantum transitions for laser locking, as well as increase the compactness and stability of the experimental setup, we propose to utilize photonic integrated resonators with high second-harmonic (SH) generation efficiencies as reliable frequency doublers that link the desired frequencies with the frequency references. In this Letter, a sufficiently strong SH signal up to microwatts was generated by a photonic integrated frequency doubler using a milliwatt infrared (IR) laser source. Furthermore, an increased SH generation bandwidth covering Rb85 and Rb87D2 transition lines, as well as saturated absorption spectroscopy, was demonstrated by tuning the pump power and chip temperature. Here we present, to the best of our knowledge, the first successful locking of an IR laser to Rb saturated absorption lines via a photonic chip frequency doubler.

DOI: 10.1364/ol.44.001150

Related papers

Frequency stabilization of a frequency-doubled 1556-nm source to the 5S_1/2 → 5D_5/2 two-photon transitions of rubidium

Amos Danielli, P. Rusian, Ady Arie +2 more

Improvements in the power level of sources near 1550 nm and in the efficiency of waveguide frequency doublers enabled us to lock a frequency-doubled source directly to the 5S(1/2) ? 5D(5/2) two-photon transitions near 778 nm. We obtained a sufficiently powerful second-harmonic signal, exceeding 2 mW, by doubling an external-cavity diode laser that was amplified by an erbium-doped fiber amplifier in a periodically poled LiNbO(3) channel waveguide. Our experimental scheme can be used for realizing compact, high-performance frequency standards near 1550 nm for fiber-optic communication and sensing applications.

Optics Letters•Jun 15, 2000•28 citations

Quasi-phase-matched frequency doubling in a waveguide of a 1560-nm diode laser and locking to the rubidium D_2 absorption lines

Vered Mahal, Mark A. Arbore, M. M. Fejer +1 more

An external-cavity 1560-nm diode laser was frequency doubled in a 3-cm-long periodically poled LiNbO(3) waveguide doubler with 120% W(-1) conversion efficiency. The 780-nm light was used to detect the D(2) transitions of Rb, and the laser frequency was locked to Doppler-broadened lines of Rb. Furthermore, the ~1 microW of second-harmonic power was sufficient for detecting the sub-Doppler lines of Rb, and the laser was locked to a (87)Rb crossover line.

Optics Letters•Aug 15, 1996•43 citations

Frequency stabilization of a frequency-doubled 1556 nm source to the two-photon transitions of rubidium

Amos Danielli, P. Rusian, Ady Arie +2 more

Summary form only given. Summary from only given. Frequency-stabilized sources near 1550 nm are required as frequency references. Owing to recent progress in optical amplifiers and in waveguide frequency doublers, we have now obtained sufficiently powerful second harmonic signal for direct detection and locking to the rubidium transition, using a single 1556 nm source.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Nov 11, 2002•0 citations

A wavelength reference at 1560 nm using a photonic rubidium spectrometer and aluminum nitride microresonator frequency doubler (Conference Presentation)

Casey McKenna, Douglas G. Bopp, Zach L. Newman +8 more

Wavelength references in the telecom spectrum have applications in communications and dimensional metrology. However, they typically consist of bulk optics and vapor cells. Photonic integration of these components may lead to low cost, portable devices. Here we demonstrate the incorporation of a photonic Rb spectrometer with an AlN microresonator frequency doubler. Light at 1560 nm is coupled onto a chip containing the AlN microresonator frequency doubler. The resulting 780 nm light is sent to the photonic Rb spectrometer, which consists of an apodized grating beam expander and microfabricated MEMS vapor cell. We perform Doppler broadened spectroscopy of the D2 line and demonstrate preliminary laser stabilization to these features.

Optical and Quantum Sensing and Precision Metrology II•Mar 9, 2020•0 citations

Doppler-free modulation transfer spectroscopy of rubidium 52S1/2–62P1/2 transitions using a frequency-doubled diode laser blue-light source

Nobuhiko Ito

A frequency-doubled diode laser spectrometer in the blue-wavelength region with a continuous-frequency tuning range of up to ∼7 GHz has been developed, comprising a powerful fundamental light source based on a master/slave laser combination coupled with a KNbO3 crystal for second-harmonic generation in a power-enhancement cavity. It has been employed for the observation of saturated absorption spectra in 52S1/2–62P1/2 hyperfine transitions of atomic rubidium with the aid of a modulation transfer spectroscopic technique, and also the frequency stabilization to one of them has been demonstrated, suggesting the possibility of the establishment of a precision optical frequency marker in the blue range. A relative stability of better than 2.8×10−10 is estimated based on the locked error signal in the preliminary stabilization. With a further study of the frequency instability and uncertainty, in addition to supplementary improvements of apparatus, one may expect a realization of a stabilized laser in the blue-spectral domain. Details of the developed blue-light source are described and the demonstrated results of the rubidium spectroscopy are also described and discussed.

Review of Scientific Instruments•Jul 1, 2000•28 citations

Advances in chip-scale atomic frequency references at NIST

Svenja A. Knappe, Vishal Shah, Alan S. Brannon +5 more

Coherent population trapping (CPT) resonances usually exhibit contrasts below 10% when interrogated with frequency modulated lasers. We discuss a relatively simple way to increase the resonance contrast to nearly 100% generating an additional light field through a nonlinear four-wave mixing interaction in the atomic vapor.1 A similar method can also be used to create a beat signal at the CPT resonance frequency that can injection-lock a low-power microwave oscillator at 3.4 GHz directly to the atomic resonance.2 This could lead to chip-scale atomic clocks (CSACs) with improved performance. Furthermore, we introduce a miniature microfabricated saturated absorption spectrometer3 that produces a signal for locking a laser frequency to optical transitions in alkali atoms. The Rb absorption spectra are comparable to signals obtained with standard table-top setups, although the rubidium vapor cell has an interior volume of only 1 mm3 and the volume of the entire spectrometer is around 0.1 cm3.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Aug 29, 2007•9 citations

To extend the coherence of quantum transitions for laser locking, as well as increase the compactness and stability of the experimental setup, we propose to utilize photonic integrated resonators with high second-harmonic (SH) generation efficiencies as reliable frequency doublers that link the desired frequencies with the frequency references. In this Letter, a sufficiently strong SH signal up to microwatts was generated by a photonic integrated frequency doubler using a milliwatt infrared (IR) laser source. Furthermore, an increased SH generation bandwidth covering Rb85 and Rb87D2 transition lines, as well as saturated absorption spectroscopy, was demonstrated by tuning the pump power and chip temperature. Here we present, to the best of our knowledge, the first successful locking of an IR laser to Rb saturated absorption lines via a photonic chip frequency doubler.

Improvements in the power level of sources near 1550 nm and in the efficiency of waveguide frequency doublers enabled us to lock a frequency-doubled source directly to the 5S(1/2) ? 5D(5/2) two-photon transitions near 778 nm. We obtained a sufficiently powerful second-harmonic signal, exceeding 2 mW, by doubling an external-cavity diode laser that was amplified by an erbium-doped fiber amplifier in a periodically poled LiNbO(3) channel waveguide. Our experimental scheme can be used for realizing compact, high-performance frequency standards near 1550 nm for fiber-optic communication and sensing applications.

Wavelength references in the telecom spectrum have applications in communications and dimensional metrology. However, they typically consist of bulk optics and vapor cells. Photonic integration of these components may lead to low cost, portable devices. Here we demonstrate the incorporation of a photonic Rb spectrometer with an AlN microresonator frequency doubler. Light at 1560 nm is coupled onto a chip containing the AlN microresonator frequency doubler. The resulting 780 nm light is sent to the photonic Rb spectrometer, which consists of an apodized grating beam expander and microfabricated MEMS vapor cell. We perform Doppler broadened spectroscopy of the D2 line and demonstrate preliminary laser stabilization to these features.

A frequency-doubled diode laser spectrometer in the blue-wavelength region with a continuous-frequency tuning range of up to ∼7 GHz has been developed, comprising a powerful fundamental light source based on a master/slave laser combination coupled with a KNbO3 crystal for second-harmonic generation in a power-enhancement cavity. It has been employed for the observation of saturated absorption spectra in 52S1/2–62P1/2 hyperfine transitions of atomic rubidium with the aid of a modulation transfer spectroscopic technique, and also the frequency stabilization to one of them has been demonstrated, suggesting the possibility of the establishment of a precision optical frequency marker in the blue range. A relative stability of better than 2.8×10−10 is estimated based on the locked error signal in the preliminary stabilization. With a further study of the frequency instability and uncertainty, in addition to supplementary improvements of apparatus, one may expect a realization of a stabilized laser in the blue-spectral domain. Details of the developed blue-light source are described and the demonstrated results of the rubidium spectroscopy are also described and discussed.

Coherent population trapping (CPT) resonances usually exhibit contrasts below 10% when interrogated with frequency modulated lasers. We discuss a relatively simple way to increase the resonance contrast to nearly 100% generating an additional light field through a nonlinear four-wave mixing interaction in the atomic vapor.1 A similar method can also be used to create a beat signal at the CPT resonance frequency that can injection-lock a low-power microwave oscillator at 3.4 GHz directly to the atomic resonance.2 This could lead to chip-scale atomic clocks (CSACs) with improved performance. Furthermore, we introduce a miniature microfabricated saturated absorption spectrometer3 that produces a signal for locking a laser frequency to optical transitions in alkali atoms. The Rb absorption spectra are comparable to signals obtained with standard table-top setups, although the rubidium vapor cell has an interior volume of only 1 mm3 and the volume of the entire spectrometer is around 0.1 cm3.