arXiv:1507.05126 · Applied Physics Letters

Frequency-tunable superconducting resonators via nonlinear kinetic inductance

Michael R. Vissers, Johannes Hubmayr, Martin Sandberg, Saptarshi Chaudhuri, Clint Bockstiegel, J. Gao

Published Aug 10, 2015• 93 citations

Abstract

We have designed, fabricated, and tested a frequency-tunable high-Q superconducting resonator made from a niobium titanium nitride film. The frequency tunability is achieved by injecting a DC through a current-directing circuit into the nonlinear inductor whose kinetic inductance is current-dependent. We have demonstrated continuous tuning of the resonance frequency in a 180 MHz frequency range around 4.5 GHz while maintaining the high internal quality factor Qi > 180 000. This device may serve as a tunable filter and find applications in superconducting quantum computing and measurement. It also provides a useful tool to study the nonlinear response of a superconductor. In addition, it may be developed into techniques for measurement of the complex impedance of a superconductor at its transition temperature and for readout of transition-edge sensors.

DOI: 10.1063/1.4927444

Related papers

Frequency-tunable high-Q superconducting resonators via wireless control of nonlinear kinetic inductance

Mingrui Xu, Xu Han, Wei Fu +2 more

Frequency-tunable microwave resonators are in great demand especially in hybrid systems where precise frequency alignment of resonances is required. Here, we present frequency-tunable high-Q superconducting resonators fabricated from thin niobium nitride and niobium titanium nitride films. The resonant frequency is tuned by applying a magnetic field perpendicular to the hole structures in the resonator's inductor wire, whose kinetic inductance is modified by wirelessly induced DC supercurrents. A continuous in situ frequency tuning of over 300 MHz is achieved for a 10 GHz resonator with a moderate magnetic field of 1.2 mT. The planar resonator design and the noncontact tuning scheme greatly ease the fabrication complexity and can be widely applied in many hybrid systems for coupling microwave modes with other forms of excitations such as optical photons, phonons, magnons, and spins.

Applied Physics LettersMay 13, 201961 citations

A tunable coupler for superconducting microwave resonators using a nonlinear kinetic inductance transmission line

Clint Bockstiegel, Yiwen Wang, Michael R. Vissers +4 more

We present a tunable coupler scheme that allows us to tune the coupling strength between a feedline and a superconducting resonator in situ over a wide range. In this scheme, we shunt the feedline with a 50-Ω lumped-element nonlinear transmission line made from a 20 nm NbTiN film. By injecting a DC current, the nonlinear kinetic inductance changes and the effective impedance shunting the resonator periodically varies from a short to an open, which tunes the coupling strength and coupling quality factor Qc. We have demonstrated Qc tuning over a factor of 40, between Qc∼5.5×104 and Qc∼2.3×106, for a 4.5 GHz resonator by applying a DC current less than 3.3 mA. Our tunable coupler scheme is easy to implement and may find broad applications in superconducting detector and quantum computing/information experiments.

Applied Physics LettersMay 30, 201625 citations

Kinetic inductance compact resonator with NbTiN micronwires

Ming Yang, Xiaoliang He, Wanpeng Gao +6 more

Nonlinear resonators of superconducting thin-film kinetic inductance have attracted considerable research interest in the fields of detectors, qubits, parametric amplifiers, and more. By tuning the deposition parameters, niobium titanium nitride (NbTiN) films (∼12 nm in thickness) present high resistivity(∼2000 μΩ cm) and large sheet kinetic inductance (∼0.7 nH/□). We designed resonators with NbTiN micronwire as the inductor and aluminum as the capacitor, which result in a high internal quality factor and a Kerr nonlinearity of a few hertz. The radio frequency response of the resonators demonstrates nonlinear behavior similar to that of the cubic Duffing oscillator, including frequency shift and hysteresis region. The kinetic inductance resonator is a promising candidate for high saturation power parametric amplifiers.

AIP AdvancesAug 1, 20245 citations

Flux-coupled tunable superconducting resonator

Juliang Li, Peter S. Barry, Tom Cecil +6 more

We present a design and implementation of a frequency-tunable superconducting resonator. The resonance frequency tunability is achieved by flux-coupling a superconducting LC loop to a current-biased feedline; the resulting screening current leads to a change of the kinetic inductance and shift in the resonance frequency. The thin-film aluminum resonator consists of an interdigitated capacitor and thin line inductors forming a closed superconducting loop. The magnetic flux from the nearby niobium current feedline induces Meissner shielding currents in the resonator loop leading to a change in the kinetic part of the total inductance of the resonator. We demonstrate continuous frequency tuning within 160 MHz around the resonant frequency of 2.7 GHz. We show that: (1) frequency up-conversion is achieved when a kilohertz ac modulation signal is superimposed onto the dc bias resulting in sidebands to the resonator tone; (2) three-wave mixing is attained by parametrically pumping the nonlinear kinetic inductance using a strong rf pump signal in the feedline. The simple architecture is amenable to large-array multiplexing and on-chip integration with other circuit components. The concept could be applied in flux magnetometers, up-converters, and parametric amplifiers operating above 4 K when alternative high-critical-temperature material with high kinetic inductance is used.

arXiv:2312.12755Physical Review AppliedJul 30, 20249 citations

Tunable superconducting microstrip resonators

A. A. Adamyan, Sergey Kubatkin, Andrey V. Danilov

We report on a simple yet versatile design for a tunable superconducting microstrip resonator. Niobium nitride is employed as the superconducting material and aluminum oxide, produced by atomic layer deposition, as the dielectric layer. We show that the high quality of the dielectric material allows to reach the internal quality factors in the order of Qi∼104 in the single photon regime. Qi rapidly increases with the number of photons in the resonator N and exceeds 105 for N∼10−50. A straightforward modification of the basic microstrip design allows to pass a current bias through the strip and to control its kinetic inductance. We achieve a frequency tuning δf=62 MHz around f0=2.4 GHz for a fundamental mode and δf=164 MHz for a third harmonic. This translates into a tuning parameter Qiδf/f0=150. The presented design can be incorporated into essentially any superconducting circuitry operating at temperatures below 2.5 K.

Applied Physics LettersApr 25, 201633 citations

Superconducting Nonlinear Kinetic Inductance Devices

Kher, Aditya Shreyas

We describe a novel class of devices based on the nonlinearity of the kinetic inductance of a superconducting thin film. By placing a current-dependent inductance in a microwave resonator, small currents can be measured through their effect on the resonator’s frequency. By using a high-resistivity material for the film and nanowires as kinetic inductors, we can achieve a large coefficient of nonlinearity to improve device sensitivity. We demonstrate a current sensitivity of 8 pA/√Hz, making this device useful for transition-edge sensor (TES) readout and other cutting-edge applications. An advantage of these devices is their natural ability to be multiplexed in the frequency domain, enabling large detector arrays for TES-based instruments. A traveling-wave version of the device, consisting of a thin-film microwave transmission line, is also sensitive to small currents as they change the phase length of the line due to their effect on its inductance. We demonstrate a current sensitivity of 5 pA/√Hz for this version of the device, making it also suitable for TES readout as well as other current-detection applications. It has the advantage of multi-gigahertz bandwidth and greater dynamic range, offering a different approach to the resonator version of the device. Finally, we also demonstrate a transmission-line resonator version of the device that combines some of the advantages of the nanowire resonator and the traveling-wave device. This version of the device has high dynamic range but can also be easily multiplexed in the frequency domain. A lumped-element resonator similar to the first device can be placed in a loop configuration to make it sensitive to magnetic fields. We demonstrate an example of such a device whose sensitivity could ultimately reach levels similar to those of state-of-the-art DC SQUIDs, making it potentially useful for many magnetometry applications given its ease of multiplexing. Finally, a similar microwave resonator is shown to exhibit parametric gain of up to 29 dB in the presence of a strong pump tone. The noise performance of this parametric amplifier approaches the quantum limit, making it useful for applications in quantum information and metrology.

Feb 10, 201717 citations