Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Physics Letters

Frequency-tunable high-Q superconducting resonators via wireless control of nonlinear kinetic inductance

Mingrui Xu, Xu Han, Wei Fu, Chang‐Ling Zou, Hong X. Tang

Published May 13, 2019• 61 citations
Publisher

Abstract

Frequency-tunable microwave resonators are in great demand especially in hybrid systems where precise frequency alignment of resonances is required. Here, we present frequency-tunable high-Q superconducting resonators fabricated from thin niobium nitride and niobium titanium nitride films. The resonant frequency is tuned by applying a magnetic field perpendicular to the hole structures in the resonator's inductor wire, whose kinetic inductance is modified by wirelessly induced DC supercurrents. A continuous in situ frequency tuning of over 300 MHz is achieved for a 10 GHz resonator with a moderate magnetic field of 1.2 mT. The planar resonator design and the noncontact tuning scheme greatly ease the fabrication complexity and can be widely applied in many hybrid systems for coupling microwave modes with other forms of excitations such as optical photons, phonons, magnons, and spins.

DOI
10.1063/1.5098466

Related papers

Frequency-tunable superconducting resonators via nonlinear kinetic inductance

Michael R. Vissers, Johannes Hubmayr, Martin Sandberg +3 more

We have designed, fabricated, and tested a frequency-tunable high-Q superconducting resonator made from a niobium titanium nitride film. The frequency tunability is achieved by injecting a DC through a current-directing circuit into the nonlinear inductor whose kinetic inductance is current-dependent. We have demonstrated continuous tuning of the resonance frequency in a 180 MHz frequency range around 4.5 GHz while maintaining the high internal quality factor Qi > 180 000. This device may serve as a tunable filter and find applications in superconducting quantum computing and measurement. It also provides a useful tool to study the nonlinear response of a superconductor. In addition, it may be developed into techniques for measurement of the complex impedance of a superconductor at its transition temperature and for readout of transition-edge sensors.

arXiv:1507.05126•Applied Physics Letters•Aug 10, 2015•93 citations

Wirelessly tunable superconducting resonators in the W-band

Debadri Das, Charlotte M. Wehner, Nathan T. Yoho +1 more

We are working to develop a high-Q superconducting resonator at mm-wave frequencies, particularly in the W-band (75-110 GHz). The resonator is made out of a high-kinetic inductance material (Niobium Titanium Nitride on Sapphire). The resonance is tuned wirelessly via an uniform axial magnetic field generated by a solenoid. We will characterize the tuning bandwidth of the resonator by sweeping the B-field while performing transmission measurements (S21) in a cryogenic environment at ~1-4 K.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Aug 17, 2025•0 citations

Flux-coupled tunable superconducting resonator

Juliang Li, Peter S. Barry, Tom Cecil +6 more

We present a design and implementation of a frequency-tunable superconducting resonator. The resonance frequency tunability is achieved by flux-coupling a superconducting LC loop to a current-biased feedline; the resulting screening current leads to a change of the kinetic inductance and shift in the resonance frequency. The thin-film aluminum resonator consists of an interdigitated capacitor and thin line inductors forming a closed superconducting loop. The magnetic flux from the nearby niobium current feedline induces Meissner shielding currents in the resonator loop leading to a change in the kinetic part of the total inductance of the resonator. We demonstrate continuous frequency tuning within 160 MHz around the resonant frequency of 2.7 GHz. We show that: (1) frequency up-conversion is achieved when a kilohertz ac modulation signal is superimposed onto the dc bias resulting in sidebands to the resonator tone; (2) three-wave mixing is attained by parametrically pumping the nonlinear kinetic inductance using a strong rf pump signal in the feedline. The simple architecture is amenable to large-array multiplexing and on-chip integration with other circuit components. The concept could be applied in flux magnetometers, up-converters, and parametric amplifiers operating above 4 K when alternative high-critical-temperature material with high kinetic inductance is used.

arXiv:2312.12755•Physical Review Applied•Jul 30, 2024•9 citations

Utilizing Gate-Controlled Supercurrent for All-Metallic Tunable Superconducting Microwave Resonators

Younghun Ryu, Jinhoon Jeong, Junho Suh +3 more

Hybridizing a microwave mode with a quantum state requires precise frequency matching of a superconducting microwave resonator and the corresponding quantum object. However, fabrication always brings imperfections in geometry and material properties, causing deviations from the desired operating frequencies. An effective and universal strategy for their resonant coupling is to tune the frequency of a resonator, as quantum states like phonons are hardly tunable. Here, we demonstrate gate-tunable, titanium-nitride (TiN)-based superconducting resonators by implementing a nanowire inductor whose kinetic inductance is tuned via the gate-controlled supercurrent (GCS) effect. We investigate their responses for different gate biases and observe 4% (∼150 MHz) frequency tuning with decreasing internal quality factors. We also perform temperature-controlled experiments to support phonon-related mechanisms in the GCS effect and the resonance tuning. The GCS effect-based method proposed in this study provides an effective route for locally tunable resonators that can be employed in various hybrid quantum devices.

Nano Letters•Jan 17, 2024•10 citations

Kinetic inductance compact resonator with NbTiN micronwires

Ming Yang, Xiaoliang He, Wanpeng Gao +6 more

Nonlinear resonators of superconducting thin-film kinetic inductance have attracted considerable research interest in the fields of detectors, qubits, parametric amplifiers, and more. By tuning the deposition parameters, niobium titanium nitride (NbTiN) films (∼12 nm in thickness) present high resistivity(∼2000 μΩ cm) and large sheet kinetic inductance (∼0.7 nH/□). We designed resonators with NbTiN micronwire as the inductor and aluminum as the capacitor, which result in a high internal quality factor and a Kerr nonlinearity of a few hertz. The radio frequency response of the resonators demonstrates nonlinear behavior similar to that of the cubic Duffing oscillator, including frequency shift and hysteresis region. The kinetic inductance resonator is a promising candidate for high saturation power parametric amplifiers.

AIP Advances•Aug 1, 2024•5 citations

A tunable coupler for superconducting microwave resonators using a nonlinear kinetic inductance transmission line

Clint Bockstiegel, Yiwen Wang, Michael R. Vissers +4 more

We present a tunable coupler scheme that allows us to tune the coupling strength between a feedline and a superconducting resonator in situ over a wide range. In this scheme, we shunt the feedline with a 50-Ω lumped-element nonlinear transmission line made from a 20 nm NbTiN film. By injecting a DC current, the nonlinear kinetic inductance changes and the effective impedance shunting the resonator periodically varies from a short to an open, which tunes the coupling strength and coupling quality factor Qc. We have demonstrated Qc tuning over a factor of 40, between Qc∼5.5×104 and Qc∼2.3×106, for a 4.5 GHz resonator by applying a DC current less than 3.3 mA. Our tunable coupler scheme is easy to implement and may find broad applications in superconducting detector and quantum computing/information experiments.

Applied Physics Letters•May 30, 2016•25 citations
Frequency-tunable microwave resonators are in great demand especially in hybrid systems where precise frequency alignment of resonances is required. Here, we present frequency-tunable high-Q superconducting resonators fabricated from thin niobium nitride and niobium titanium nitride films. The resonant frequency is tuned by applying a magnetic field perpendicular to the hole structures in the resonator's inductor wire, whose kinetic inductance is modified by wirelessly induced DC supercurrents. A continuous in situ frequency tuning of over 300 MHz is achieved for a 10 GHz resonator with a moderate magnetic field of 1.2 mT. The planar resonator design and the noncontact tuning scheme greatly ease the fabrication complexity and can be widely applied in many hybrid systems for coupling microwave modes with other forms of excitations such as optical photons, phonons, magnons, and spins.
We have designed, fabricated, and tested a frequency-tunable high-Q superconducting resonator made from a niobium titanium nitride film. The frequency tunability is achieved by injecting a DC through a current-directing circuit into the nonlinear inductor whose kinetic inductance is current-dependent. We have demonstrated continuous tuning of the resonance frequency in a 180 MHz frequency range around 4.5 GHz while maintaining the high internal quality factor Qi > 180 000. This device may serve as a tunable filter and find applications in superconducting quantum computing and measurement. It also provides a useful tool to study the nonlinear response of a superconductor. In addition, it may be developed into techniques for measurement of the complex impedance of a superconductor at its transition temperature and for readout of transition-edge sensors.
We present a design and implementation of a frequency-tunable superconducting resonator. The resonance frequency tunability is achieved by flux-coupling a superconducting LC loop to a current-biased feedline; the resulting screening current leads to a change of the kinetic inductance and shift in the resonance frequency. The thin-film aluminum resonator consists of an interdigitated capacitor and thin line inductors forming a closed superconducting loop. The magnetic flux from the nearby niobium current feedline induces Meissner shielding currents in the resonator loop leading to a change in the kinetic part of the total inductance of the resonator. We demonstrate continuous frequency tuning within 160 MHz around the resonant frequency of 2.7 GHz. We show that: (1) frequency up-conversion is achieved when a kilohertz ac modulation signal is superimposed onto the dc bias resulting in sidebands to the resonator tone; (2) three-wave mixing is attained by parametrically pumping the nonlinear kinetic inductance using a strong rf pump signal in the feedline. The simple architecture is amenable to large-array multiplexing and on-chip integration with other circuit components. The concept could be applied in flux magnetometers, up-converters, and parametric amplifiers operating above 4 K when alternative high-critical-temperature material with high kinetic inductance is used.
Hybridizing a microwave mode with a quantum state requires precise frequency matching of a superconducting microwave resonator and the corresponding quantum object. However, fabrication always brings imperfections in geometry and material properties, causing deviations from the desired operating frequencies. An effective and universal strategy for their resonant coupling is to tune the frequency of a resonator, as quantum states like phonons are hardly tunable. Here, we demonstrate gate-tunable, titanium-nitride (TiN)-based superconducting resonators by implementing a nanowire inductor whose kinetic inductance is tuned via the gate-controlled supercurrent (GCS) effect. We investigate their responses for different gate biases and observe 4% (∼150 MHz) frequency tuning with decreasing internal quality factors. We also perform temperature-controlled experiments to support phonon-related mechanisms in the GCS effect and the resonance tuning. The GCS effect-based method proposed in this study provides an effective route for locally tunable resonators that can be employed in various hybrid quantum devices.
Nonlinear resonators of superconducting thin-film kinetic inductance have attracted considerable research interest in the fields of detectors, qubits, parametric amplifiers, and more. By tuning the deposition parameters, niobium titanium nitride (NbTiN) films (∼12 nm in thickness) present high resistivity(∼2000 μΩ cm) and large sheet kinetic inductance (∼0.7 nH/□). We designed resonators with NbTiN micronwire as the inductor and aluminum as the capacitor, which result in a high internal quality factor and a Kerr nonlinearity of a few hertz. The radio frequency response of the resonators demonstrates nonlinear behavior similar to that of the cubic Duffing oscillator, including frequency shift and hysteresis region. The kinetic inductance resonator is a promising candidate for high saturation power parametric amplifiers.
We present a tunable coupler scheme that allows us to tune the coupling strength between a feedline and a superconducting resonator in situ over a wide range. In this scheme, we shunt the feedline with a 50-Ω lumped-element nonlinear transmission line made from a 20 nm NbTiN film. By injecting a DC current, the nonlinear kinetic inductance changes and the effective impedance shunting the resonator periodically varies from a short to an open, which tunes the coupling strength and coupling quality factor Qc. We have demonstrated Qc tuning over a factor of 40, between Qc∼5.5×104 and Qc∼2.3×106, for a 4.5 GHz resonator by applying a DC current less than 3.3 mA. Our tunable coupler scheme is easy to implement and may find broad applications in superconducting detector and quantum computing/information experiments.