Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Recent progress in submillimeter heterodyne receiver development

Jonas Stasys Zmuidzinas

Published Dec 1, 1996• 3 citations
OpenAlex

Abstract

The progress made in relation to the development of sensitive submillimeter heterodyne receiver systems is reviewed. Sensitive superconductor-insulator-superconductor (SIS) tunnel junction mixers were demonstrated at frequencies of greater than 1 THz, with noise temperatures of below 1000 K. An alternative mixer technology is that of the superconducting hot electron bolometer, for which sensitivities of 1.2 THz and 2.5 THz were demonstrated. Local oscillator technology is under development. Gunn oscillators followed by Schottky varactor frequency multipliers have sufficient output power to drive SIS mixers at 1 THz. It is considered that optical photomixer local oscillators have potential for driving hot electron bolometers above 1 THz.

Related papers

Fabrication of High-Tc Hot-Electron Bolometric Mixers for Submillimeter Heterodyne Applications

Michael J. Burns, Alan W. Kleinsasser, Boris S. Karasik +2 more

Superconducting hot-electron bolometers are the most promising candidate for heterodyne mixers at frequencies above 1 THz. These devices operate by heating of electrons in the superconductor, and thus have no energy gap related frequency limitation, such as exists in SIS mixers, for example. Nb hot-electron bolometric mixers have recently demonstrated superior performance to competing Schottky mixers at frequencies above 1 THz, but of course must be operated at liquid helium temperatures. YBa 2Cu307_,5 hot-electron bolometric mixers introduce the possibility of sensitive, low power heterodyne detectors operating at temperatures approaching 90 K for high-background applications, such as earth observing missions. We describe the fabrication of high-T, devices based on ultrathin (<20 nm) YBa2Cu307_ 5 films for use as 2.5 THz mixers.

•Jan 1, 1997•0 citations

Low-noise THz-range Nb based SIS Receivers for Radio Astronomy

Kirill I. Rudakov, Andrey V. Khudchenko, Lyudmila V. Filippenko +4 more

This repost describes our results on development of low-noise heterodyne THz receivers for ground based and space radio astronomy. Superconductor-insulator-superconductor (SIS) mixers that employ high quality Nb-based tunnel junctions are the key element of the most sensitive heterodyne THz receivers. In particular we present here the SIS receivers for frequency range 211-275 GHz and 800-950 GHz with double sideband (DSB) noise temperature of about 25 K and 220 K, respectively. The latest results on development, fabrication techniques and experimental study of the SIS receivers will be discussed.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Nov 8, 2020•7 citations

0.5-THz waveguide SIS mixers with NbN/AlN/NbN technology - art. no. 684013

Jing Li, Takeda Masanon, Zhen Wang

Heterodyne mixers based on superconducting SIS (superconductor-insulator-superconductor) tunnel junctions have been demonstrated to be the most sensitive coherent detectors at millimeter and submillimeter wavelengths. In fact, conventional superconducting SIS mixers with Nb/AIO(x)/Nb junction and Nb/SiO2/Nb tuning circuit have shown good performances with the noise temperature reaching as low as three times the quantum limit below 0.7THz, which is the gap frequency of Nb-based SIS junctions. However, due to the large loss in Nb thin-film superconducting microstrip lines, the noise performance of Nb SIS mixers deteriorates significantly above 0.7THz. With a gap frequency double that of Nb-based SIS junctions, NbN-based SIS junctions are of particular interest for the development of heterodyne mixers in the terahertz region.

•Jan 1, 2008•0 citations

Low-Noise Superconducting Mixers for the Terahertz Frequency Range

Victor Y. Belitsky, Serguei Cherednichenko, Dag Winkler

This chapter discusses the high sensitivity superconducting mixers, i.e. detectors used in heterodyne receivers. Today, there are essentially two very successful concepts of superconducting mixers, or frequency down-converters, the superconductor-insulator-superconductor tunnel junction SIS mixer and the superconducting hot-electron bolometer mixer. Moving up to higher frequencies in the microwave and millimeter wave electromagnetic spectra makes it more and more difficult to retrieve a good signal-to-noise ratio with ordinary solid-state amplifiers. The driving force for using superconducting mixers is their excellent down-conversion efficiency and capability to down-convert RF signals from microwave frequencies up to the terahertz region. The main purpose of a receiver is to pick up and amplify a weak signal, which can then be accurately determined in amplitude and phase. The mixer noise temperature and conversion gain are the most important parameters for the mixing device. The Josephson junction mixer was one of the first suggested devices based on superconducting point contacts and later tunnel junctions.

CRC Press eBooks•May 17, 2022•1 citation

0.5-THz waveguide SIS mixers with NbN/AlN/NbN technology

Jing Li, Masanori Takeda, Zhen Wang +1 more

Heterodyne mixers based on superconducting SIS (superconductor-insulator-superconductor) tunnel junctions have been demonstrated to be the most sensitive coherent detectors at millimeter and submillimeter wavelengths. In fact, conventional superconducting SIS mixers with Nb/AlOx/Nb junction and Nb/SiO2/Nb tuning circuit have shown good performances with the noise temperature reaching as low as three times the quantum limit below 0.7THz, which is the gap frequency of Nb-based SIS junctions. However, due to the large loss in Nb thin-film superconducting microstrip lines, the noise performance of Nb SIS mixers deteriorates significantly above 0.7THz. With a gap frequency double that of Nb-based SIS junctions, NbN-based SIS junctions are of particular interest for the development of heterodyne mixers in the terahertz region. Considering the bandwidth and output power of local-oscillator (LO) signal sources are quite limited around 1THz, we firstly develop a waveguide NbN-based SIS mixer at 0.5THz. Three types of SIS junctions, i.e., long junction, parallel-connected tunnel junction (PCTJ) and distributed junction array (DJ) are investigated. They are all comprised of NbN-AlN-NbN tri-layer fabricated on an MgO substrate and have the same current density (Jc) of 10kA/cm2. In this paper, we describe their design, fabrication and preliminary experimental results.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Nov 29, 2007•3 citations

THz Range Low-Noise SIS Receivers for Space and Ground-Based Radio Astronomy

Kirill I. Rudakov, Andrey V. Khudchenko, Lyudmila V. Filippenko +5 more

We report on research in the field of low-noise receiving systems in the sub-terahertz (THz) range, carried out in recent years, aimed at developing receivers with quantum sensitivity for implementation in space and ground-based radio telescopes. Superconductor-Insulator-Superconductor (SIS) mixers based on high-quality tunnel junctions are the key elements of the most sensitive sub-THz heterodyne receivers. Motivations and physical background for technology improvement and optimization, as well as fabrication details, are described. This article presents the results of the SIS receiver developments for the 211–275 GHz and 790–950 GHz frequency ranges with a noise temperature in the double sideband (DSB) mode of approximTELY 20 K and 200 K, respectively. These designs and achievements are implemented in the development of the receiving systems for the Russian Space Agency mission “Millimetron”, and for the ground-based APEX (Atacama Pathfinder EXperiment) telescope.

Applied Sciences•Oct 28, 2021•36 citations
The progress made in relation to the development of sensitive submillimeter heterodyne receiver systems is reviewed. Sensitive superconductor-insulator-superconductor (SIS) tunnel junction mixers were demonstrated at frequencies of greater than 1 THz, with noise temperatures of below 1000 K. An alternative mixer technology is that of the superconducting hot electron bolometer, for which sensitivities of 1.2 THz and 2.5 THz were demonstrated. Local oscillator technology is under development. Gunn oscillators followed by Schottky varactor frequency multipliers have sufficient output power to drive SIS mixers at 1 THz. It is considered that optical photomixer local oscillators have potential for driving hot electron bolometers above 1 THz.
Superconducting hot-electron bolometers are the most promising candidate for heterodyne mixers at frequencies above 1 THz. These devices operate by heating of electrons in the superconductor, and thus have no energy gap related frequency limitation, such as exists in SIS mixers, for example. Nb hot-electron bolometric mixers have recently demonstrated superior performance to competing Schottky mixers at frequencies above 1 THz, but of course must be operated at liquid helium temperatures. YBa 2Cu307_,5 hot-electron bolometric mixers introduce the possibility of sensitive, low power heterodyne detectors operating at temperatures approaching 90 K for high-background applications, such as earth observing missions. We describe the fabrication of high-T, devices based on ultrathin (<20 nm) YBa2Cu307_ 5 films for use as 2.5 THz mixers.
This repost describes our results on development of low-noise heterodyne THz receivers for ground based and space radio astronomy. Superconductor-insulator-superconductor (SIS) mixers that employ high quality Nb-based tunnel junctions are the key element of the most sensitive heterodyne THz receivers. In particular we present here the SIS receivers for frequency range 211-275 GHz and 800-950 GHz with double sideband (DSB) noise temperature of about 25 K and 220 K, respectively. The latest results on development, fabrication techniques and experimental study of the SIS receivers will be discussed.
Heterodyne mixers based on superconducting SIS (superconductor-insulator-superconductor) tunnel junctions have been demonstrated to be the most sensitive coherent detectors at millimeter and submillimeter wavelengths. In fact, conventional superconducting SIS mixers with Nb/AIO(x)/Nb junction and Nb/SiO2/Nb tuning circuit have shown good performances with the noise temperature reaching as low as three times the quantum limit below 0.7THz, which is the gap frequency of Nb-based SIS junctions. However, due to the large loss in Nb thin-film superconducting microstrip lines, the noise performance of Nb SIS mixers deteriorates significantly above 0.7THz. With a gap frequency double that of Nb-based SIS junctions, NbN-based SIS junctions are of particular interest for the development of heterodyne mixers in the terahertz region.
This chapter discusses the high sensitivity superconducting mixers, i.e. detectors used in heterodyne receivers. Today, there are essentially two very successful concepts of superconducting mixers, or frequency down-converters, the superconductor-insulator-superconductor tunnel junction SIS mixer and the superconducting hot-electron bolometer mixer. Moving up to higher frequencies in the microwave and millimeter wave electromagnetic spectra makes it more and more difficult to retrieve a good signal-to-noise ratio with ordinary solid-state amplifiers. The driving force for using superconducting mixers is their excellent down-conversion efficiency and capability to down-convert RF signals from microwave frequencies up to the terahertz region. The main purpose of a receiver is to pick up and amplify a weak signal, which can then be accurately determined in amplitude and phase. The mixer noise temperature and conversion gain are the most important parameters for the mixing device. The Josephson junction mixer was one of the first suggested devices based on superconducting point contacts and later tunnel junctions.
Heterodyne mixers based on superconducting SIS (superconductor-insulator-superconductor) tunnel junctions have been demonstrated to be the most sensitive coherent detectors at millimeter and submillimeter wavelengths. In fact, conventional superconducting SIS mixers with Nb/AlOx/Nb junction and Nb/SiO2/Nb tuning circuit have shown good performances with the noise temperature reaching as low as three times the quantum limit below 0.7THz, which is the gap frequency of Nb-based SIS junctions. However, due to the large loss in Nb thin-film superconducting microstrip lines, the noise performance of Nb SIS mixers deteriorates significantly above 0.7THz. With a gap frequency double that of Nb-based SIS junctions, NbN-based SIS junctions are of particular interest for the development of heterodyne mixers in the terahertz region. Considering the bandwidth and output power of local-oscillator (LO) signal sources are quite limited around 1THz, we firstly develop a waveguide NbN-based SIS mixer at 0.5THz. Three types of SIS junctions, i.e., long junction, parallel-connected tunnel junction (PCTJ) and distributed junction array (DJ) are investigated. They are all comprised of NbN-AlN-NbN tri-layer fabricated on an MgO substrate and have the same current density (Jc) of 10kA/cm2. In this paper, we describe their design, fabrication and preliminary experimental results.
We report on research in the field of low-noise receiving systems in the sub-terahertz (THz) range, carried out in recent years, aimed at developing receivers with quantum sensitivity for implementation in space and ground-based radio telescopes. Superconductor-Insulator-Superconductor (SIS) mixers based on high-quality tunnel junctions are the key elements of the most sensitive sub-THz heterodyne receivers. Motivations and physical background for technology improvement and optimization, as well as fabrication details, are described. This article presents the results of the SIS receiver developments for the 211–275 GHz and 790–950 GHz frequency ranges with a noise temperature in the double sideband (DSB) mode of approximTELY 20 K and 200 K, respectively. These designs and achievements are implemented in the development of the receiving systems for the Russian Space Agency mission “Millimetron”, and for the ground-based APEX (Atacama Pathfinder EXperiment) telescope.