Central topic of this thesis is the investigation of the quantum nature of light. This investigation is carried out in two separate experiments which are described in part I and part II respectively. In part I, classical and non-classical laser radiation is characterized at the quantum mechanical level with respect to its amplitude and phase uctuations, its photon number distribution and other observable quantities. This is done by employing recently developed methods of quantum state reconstruction. Such a complete characterization is of fundamental interest, since it can provide a much more detailed experimental description of light than previously known. Furthermore, since many experimental systems are analyzed by optical means, these methods may in future and important applications in the characterization of such systems in full quantum mechanical detail, by determining the state of the light held used as a probe before and after the interaction with the system. In part II, high precision position measurements via laser interferometry are investigated. Such measurements play an important role in the microscopic domain (optomechanical sensors, modern microscopy techniques) as well as in the macroscopic domain (development of large scale interferometers for the detection of gravitational waves). The goal of the second experiment is to explore the quantum mechanical limits in the precision with which the position of a macroscopic body can be determined. One common conceptual aspect of both experiments, besides the similar optical techniques employed, is that both attempt a high precision characterization of a harmonic oscillator system disturbed by stochastic noise. In part I, this oscillator is the light held, subject to quantum noise, in part II, it is a mechanical harmonic oscillator excited by thermal noise.
Central topic of this thesis is the investigation of the quantum nature of light. This investigation is carried out in two separate experiments which are described in part I and part II respectively. In part I, classical and non-classical laser radiation is characterized at the quantum mechanical level with respect to its amplitude and phase uctuations, its photon number distribution and other observable quantities. This is done by employing recently developed methods of quantum state reconstruction. Such a complete characterization is of fundamental interest, since it can provide a much more detailed experimental description of light than previously known. Furthermore, since many experimental systems are analyzed by optical means, these methods may in future and important applications in the characterization of such systems in full quantum mechanical detail, by determining the state of the light held used as a probe before and after the interaction with the system. In part II, high precision position measurements via laser interferometry are investigated. Such measurements play an important role in the microscopic domain (optomechanical sensors, modern microscopy techniques) as well as in the macroscopic domain (development of large scale interferometers for the detection of gravitational waves). The goal of the second experiment is to explore the quantum mechanical limits in the precision with which the position of a macroscopic body can be determined. One common conceptual aspect of both experiments, besides the similar optical techniques employed, is that both attempt a high precision characterization of a harmonic oscillator system disturbed by stochastic noise. In part I, this oscillator is the light held, subject to quantum noise, in part II, it is a mechanical harmonic oscillator excited by thermal noise.
Why are classical theories often sufficient to describe the physics of our world even though everything around us is entirely composed of microscopic quantum systems? The boundary between these two fundamentally dissimilar theories remains an unsolved problem in modern physics. Position measurements of small objects allow us to probe the area where the classical approximation breaks down. In quantum mechanics, Heisenbergâ s uncertainty principle dictates that any measurement of the position must be accompanied by measurement induced back-action---in this case manifested as an uncertainty in the momentum. In recent years, cavity optomechanics has become a powerful tool to perform precise position measurements and investigate their fundamental limitations. The utilization of optical micro-cavities greatly enhances the interaction between light and state-of-the-art nanomechanical oscillators. Therefore, quantum mechanical phenomena have been successfully observed in systems far beyond the microscopic world. In such a cavity optomechanical system, the fluctuations in the position of the oscillator are transduced onto the phase of the light, while fluctuations in the amplitude of the light disturb the momentum of the oscillator during the measurement. As a consequence, correlations are established between the amplitude and phase quadrature of the probe light. However, so far, observation of quantum effects has been limited exclusively to cryogenic experiments, and access to the quantum regime at room temperature has remained an elusive goal because the overwhelming amount of thermal motion masks the weak quantum effects. This thesis describes the engineering of a high-performance cavity optomechanical device and presents experimental results showing, for the first time, the broadband effects of quantum back-action at room temperature. The device strongly couples mechanical and optical modes of exceptionally high quality factors to provide a measurement sensitivity ∼104 times below the requirement to resolve the zero-point fluctuations of the mechanical oscillator. The quantum back-action is then observed through the correlations created between the probe light and the motion of the nanomechanical oscillator. A so-called â variational measurementâ , which detects the transmitted light in a homodyne detector tuned close to the amplitude quadrature, resolves the quantum noise due to these correlations at the level of 10\% of the thermal noise over more than an octave of Fourier frequencies around mechanical resonance. Moreover, building on this result, an additional experiment demonstrates the ability to achieve quantum enhanced metrology. In this case, the generated quantum correlations are used to cancel quantum noise in the measurement record, which then leads to an improved relative signal-to-noise ratio in measurements of an external force. In conclusion, the successful observation of broadband quantum behavior on a macroscopic object at room temperature is an important milestone in the field of cavity optomechanics. Specifically, this result heralds the rise of optomechanical systems as a platform for quantum physics at room temperature and shows promise for generation of ponderomotive squeezing in room-temperature interferometers.
In a nutshell, a cavity optomechanical system consists of a mechanical oscillator inside an optical cavity. Cavity optomechanics studies the interplay between the light-matter radiation-pressure interaction and the change in the cavity frequency induced by mechanical motion. By leveraging the tools of quantum optics and quantum measurement, cavity quantum optomechanics enables the engineering of nonclassical quantum states of bulk matter. In this thesis, I present protocols for engineering such nonclassical quantum states in Part II. First, I introduce a scheme to ‘grow’ a quantum kitten state of a mechanical oscillator into a macroscopic Schrödinger cat state using a series of nonlinear pulsed optomechanical interactions. Next, I detail our proposed schemes to generate and verify entanglement between two mechanical oscillators. Moving on from pulsed optomechanics, I describe the theory behind an experiment that achieved multi-phonon subtraction from a mechanical oscillator in a continuously driven Brillouin optomechanical system. In the final chapter of Part II, I provide a theoretical preview of an experiment that investigates the behaviour of the mechanical oscillator when no light is detected at the output. In Part III, I introduce a new framework for nonlinear cavity quantum optomechanics that incorporates the intrinsic nonlinearity of the radiation-pressure interaction, the nonlinearity from the cavity enhancement, and higher-order mechanical position terms in the expansion of the cavity frequency. I then propose a scheme for measuring mechanical position using general-dyne detection, applicable to pulsed and continuous measurements. This predicts a new regime of operation, the “stochastic Gaussian” regime. Finally, I discuss a protocol for deterministic mechanical squeezing that utilizes the cavity response.
The implementation of optical quantum technologies requires precise and complete characterisation tools for multi-mode nonclassical states of light. In this thesis, we propose and we implement experimentally three applications of optical quantum measurements, which combine aspects of light that are described by both discrete and continuous variables. In the rst part of this thesis, we present a new scheme for interferometric phase estimation, which uses double homodyne measurements as an alternative to photon counting. We show that, without requiring a phase reference, this scheme can achieve the optimum phase estimation precision for all path-symmetric probe states with a de ned number of photons. Furthermore, the estimation procedure is robust against state preparation imperfections, and naturally yields the same precision for all values of the estimated phase. We implement the proposed scheme experimentally, using a polarisation interferometer probed by a single-photon signal, and temporally multiplexing a single homodyne detector. We repeat the experiment with classical probe states. For both cases, we demonstrate the accuracy and precision of the proposed method, our implementation deviating by 5% from the fundamental precision bound. We demonstrate that, in our scheme, single-photon probe states can provide better precision than weak coherent ones. These results indicate that hybrid quantum resources, which combine tools from the discrete and continuous-variable paradigms, can play a signi cant role in practical sensing scenarios. In the second part of this thesis, we present an application in the eld of information thermodynamics, reporting an experimental realisation, in a photonic setup, of Maxwell's demon. We show that a measurement at the few-photons level, followed by a feed-forward operation, allows the extraction of work from intense thermal light into an electric circuit. The interpretation of the experiment leads us to the derivation of an equality relating work extraction to information acquired by measurement. We prove a bound using this relation, and show that it is in agreement with the experimental results. Our work puts forward photonic systems as a platform for experiments in the eld of information thermodynamics. In the third part of this thesis, we present a new method for the characterisation of broadband parametric down-conversion, based on stimulated frequency generation. In particular, we analyse the information contained in the frequency generation produced in the same mode as a seeding beam, for a type-II down-conversion process. We derive a model for this signal and argue that its detection can provide a useful characterisation tool in the high-gain regime, allowing for a self-referenced estimation of squeezing gain. We propose a method for measuring this signal and present an experimental realisation, based on a wave-guided source, at telecommunication wavelengths. Our experimental results demonstrate that the proposed measurement is an e ective experimental handle for discerning the intricate structure of broadband parametric down-conversion.
Without light, there would be no sight. Light acts as a probe in various measurement techniques ranging from imaging to spectroscopy, from small scale cantilever displace- ment measurement in atomic force microscopy to large scale mirror motion in interfer- ometry, light detection and ranging (LIDAR) and many other fields. As the light probe intensity rises, it not only allows reducing the background noise effect, but it also aids precision to the measurement by reducing the photon noise (shot-noise) contribution. However, increasing intensity beyond certain threshold level is not always advantageous for ultra sensitive measurements. For example in the detection of gravitational waves, the current power circulating in the large scale interferometers can not be increased further without introducing other noise sources like thermal effects on the mirrors, un- wanted scattered photons, and back action due to radiation pressure. In the imaging of delicate photo sensitive sample, high power can causes cell damage or it may lead to disturb the regular process under investigation, viz. favouring certain biochemical reaction, which do not correspond to natural in vitro behaviour. At low intensity, pho- ton noise is an important concern and quantum states of light with correlated photon fluctuation can ideally represent a fruitful way to build specific measurement strategies to surpass the limitation of standard approach based on classical light sources, offering an avenue of solutions for ultra sensitive measurements. This thesis work focuses on two application of quantum enhanced measurement strate- gies. The first part of the thesis work has been dedicated to the realization of the first wide-field microscope with Sub Shot Noise (SSN) sensitivity. This is based on the ex- ploitation of quantum correlations in the Squeezed Vacuum state. In the second part, the investigations have made on the role of the quantum correlated beams in an unusual interferometric scheme, in which two identical optical interferometers are subject to the same phase fluctuation. The scheme, in the classical regime, has been already imple- mented in a large scale experiment devoted to the search of possible quantum gravity (QG) effects at Fermilab.
Quantum opto-mechanics is a fast moving, broad research field which aims to investigate and control the interaction of light and the quantized motion of mechanical objects and the coupling between them. This allows one to engineer the mechanical quantum state by controlling and measuring the electromagnetic field, and conversely, to control the dynamical evolution of the optical field via its interaction with a mechanical system. Mechanical resonators are accessible in many different shapes and sizes, from kilogram scales in experiments that test gravitational theories to micro- and nano-scales in resolved sideband regime, where the frequency of the mechanical resonator is larger than the bandwidth of the optical cavity. In this regime, it is possible to cool the mechanical object to the ground state which allows a high degree of control and the ability to prepare interesting non-classical states, states that could aid in investigating the quantum dynamics of macroscopic objects. The field of quantum opto-mechanics is a promising testbed for quantum control technologies, such as fundamental tests of quantum mechanics, ultra-sensitive quantum sensors for precise measurements, phonon lasing, mechanical memories with long lifetime and quantum information processing. Furthermore, experiments are progressing toward strong opto-mechanical coupling regimes with single photons. This creates a platform that can take advantage of the nonlinear optical interactions to generate highly non-classical states in such light-matter interfaces. Photonic systems working in the single photon regime will be promising for low power applications and also for implementations of quantum information and computation. Motivated by these applications, this thesis consists of theoretical studies in the context of single photonics. This includes investigating non-classical mechanical state generation and mechanically controlling the dynamical evolution of optical fields in the strong coupling regime single photon opto-mechanics and furthermore, proposing a quantum sensor using single photonics. In this regard, we employ three important formalisms to treat and measure open quantum systems with non-Gaussian input fields: the conditional and unconditional cascaded master equations, Fock-state master equations and input-output Langevin equations. In the context of opto-mechanics, the system to be investigated is composed of two optical cavities with a coupling modulated via a mechanical resonator. In one case, a sequence of single photons are irreversibly sent to one of the optical cavities. After photons go through the opto-mechanical interaction, photon counting measurements are performed on the cavity output, conditionally steering the mechanical state to a highly non-classical Fock state. Numerical calculations are performed to predict the experimental parameters needed to generate a mechanical Fock state before the mechanical object is thermalized. In another case, the same opto-mechanical scheme is employed to conversely modify the state of the optical mode by engineering the state of the mechanical degree of freedom. In this case, it is shown that the opto-mechanical system operates as an effective beam splitter for the input single photons, with a transmission that can be controlled by tuning the number of excitations in the bulk mechanical resonator. When the mechanical resonator has a small coherent amplitude it acts as a quantum control, entangling the optical and mechanical degrees of freedom. As the coherent amplitude of the resonator increases, it acts as a classical control for the input photons. Finally, we propose a novel multi-purpose sensor architecture that can be used for force, refractive index and possibly local temperature detection. In this scheme, two coupled cavities behave as an effective beam splitter. This sensor is based on fourth order interference (the Hong-Ou-Mandel effect) and requires a sequence of single photon pulses and consequently has low pulse power. Changes in the parameter to be measured induce variations in the effective beam splitter reflectivity and result in changes to the visibility of interference. We propose that this generic scheme could be implemented with coupled L3 photonic crystal cavities and find that this system, which only relies on photon coincidence detection and does not need any spectral resolution, can estimate forces as small as 10-7 Newtons and can measure one part per million change in refractive index using a very low input power of 10-10 W.
Cavity optomechanics originated from the research of interferometric detection of gravitational waves, and later became a fast-growing area of techniques and approaches ranging from the fields of atomic, molecular, and optical physics to nano-science and condensed matter physics as well. Recently, it focused on the exploration of operating mechanical oscillators deep in the quantum regime, with an interest ranging from quantum-classical interface tests to high-precision quantum metrology. In this paper, recent theoretical work of our group in the field of quantum measurement with cavity optomechanical systems is reviewed. We explore the quantum measurement theory and its applications with several unconventional cavity optomechanical schemes working in the quantum regime. This review covers the basics of quantum noises in the cavity optomechanical setups and the resulting standard quantum limit of precision displacement and force measurement. Three novel quantum measurement proposals based on the hybrid optomechanical system are introduced. First, we describe a quantum back-action insulated weak force sensor. It is realized by forming a quantum-mechanics-free subsystem with two optomechanical oscillators of reversed effective mass. Then we introduce a role-reversed atomic optomechanical system which enables the preparation and the quantum tomography of a variety of non-classical states of atoms. In this system, the cavity field acts as a mechanical oscillator driven by the radiation pressure force from an ultracold atomic field. In the end, we recommend a multimode optomechanical transducer that can detect intensities significantly below the single-photon level via adiabatic transfer of the microwave signal to the optical frequency domain. These proposals demonstrate the possible applications of optomechanical devices in understanding of quantum-classical crossover and in achieving quantum measurement limit.