Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Precision Electromagnetic Measurements

Traceable Validation of Calculable Quantum-Based RF Waveforms

Jeremy N. Thomas, Nathan E. Flowers-Jacobs, Anna E. Fox, Johannes Hoffmann, Paul D. Dresselhaus

Published Sep 1, 2026• 0 citations
Publisher

Abstract

We compare the calculated, quantum-based output of a radio-frequency Josephson arbitrary waveform synthesizer (RF-JAWS) with its measured output that is calibrated through the established NIST RF power traceability path, a necessary first step towards quantum-based RF metrology. An array of 1,500 Josephson junctions (JJs) is used to synthesize sinusoids from 50MHz to 3GHz, each with a nominal output power of −49.67dBm and a demonstrated quantum-locking range (QLR) exceeding 1mA. We perform a two-tier calibration of two-port vector network analyzer (VNA) measurements of the RF-JAWS waveforms with uncertainty analysis: (1) the VNA wave parameters are referenced to a NIST-calibrated coaxial power sensor, and (2) a cryogenic probe station, together with on-chip superconducting calibration standards, establishes an on-chip reference plane at the JJ-array. The calibrated measurement of the forward- and backward-propagating power is compared with the expected, calculated outputs, and, after accounting for high-frequency roll-off, we observe agreement within the expanded (k=2) uncertainty limits for most frequencies.

DOI
10.1109/cpem68396.2026.11756102

Related papers

Cryogenic Characterization of a Superconductor Quantum-Based Microwave Reference Source for Communications and Quantum Information

Alírio Boaventura, Justus A. Brevik, Dylan Forrest Williams +6 more

We are developing a new instrument, the RF Josephson arbitrary waveform synthesizer (RF-JAWS), for communications metrology and quantum information applications. An important aspect of the RF-JAWS design is the accurate and traceable characterization of its superconducting devices. In this article, we present a procedure for characterizing microwave superconducting devices in a cryogenic RF probe station via a vector network analyzer (VNA) calibrated with a custom cryogenic calibration kit colocated with the superconducting device under test (DUT) in the cryogenic environment. By de-embedding lossy and dispersive RF interconnects linking the superconducting DUT to the measurement apparatus at room temperature, we characterize the DUT exactly at the cryogenic on-wafer reference plane. More importantly, we operate our VNA with an external modulated source and our procedure features metrology-grade multiline thru-reflect-line calibration and absolute power and phase corrections, as opposed to the more common relative scattering-parameter correction. In addition, we apply anX-parameter model to account for impedance mismatch in cryogenic Josephson microwave sources. Our techniques are also suitable for cryogenic characterization of microwave superconducting devices for solid-state quantum computers and could help to optimize the quantum-classical interfaces in these systems.

IEEE Transactions on Applied Superconductivity•Oct 13, 2021•8 citations

VHF Josephson Arbitrary Waveform Synthesizer

Jeremy N. Thomas, Nathan E. Flowers-Jacobs, Anna E. Fox +3 more

We report on the design, fabrication, and measurement of a very high frequency band Josephson arbitrary waveform synthesizer (VHF-JAWS) at frequencies from 1 kHz to 50.05 MHz. The VHF-JAWS chip is composed of a series array of 12 810 Josephson junctions (JJs) embedded in a superconducting coplanar waveguide. Each JJ responds to a pattern of current pulses by creating a corresponding pattern of voltage pulses, each with a time-integrated area related to fundamental constants as${{h/2e}}$. The pulse patterns are chosen to produce quantum-based single-tone voltage waveforms with an open-circuit voltage of 50 mV rms (–19.03 dBm output power into 50$\Omega$load impedances) at frequencies up to 50.05 MHz, which is more than twice the voltage that has been generated by previous RF-JAWS designs at 1 GHz. The VHF-JAWS is “quantum-locked,” that is, it generates one quantized output voltage pulse per input current pulse per JJ while varying the dc current through the JJ array by at least 0.4 mA and the amplitude of the bias pulses by at least 10 %. We use the large bias pulse quantum-locking range to investigate one source of error in detail: the direct feedthrough of the current bias pulses into the DUT at VHF frequencies, which adds an unwanted, in-band component to the measured voltage. We reduce this error by high-pass filtering the current bias pulses and measure the error as a function of input pulse amplitude using two techniques: 1) by measuring small changes over the quantum-locking range and 2) by passively attenuating the input pulse amplitude so that the nonlinear JJs no longer generate voltage pulses while the error is only linearly scaled.

IEEE Transactions on Applied Superconductivity•Jul 1, 2024•11 citations

RF Waveform Synthesizers With Quantum-Based Voltage Accuracy for Communications Metrology

P. F. Hopkins, Justus A. Brevik, Manuel A. Castellanos-Beltran +6 more

We review our development of Josephson-junction-based programmable reference sources to synthesize spectrally pure waveforms with quantum-based voltage accuracy for characterizing and improving future communication devices and systems. The goal is to provide sources that together span the entire radio frequency band, equivalent to seven orders of magnitude in frequency (20 kHz to 300 GHz). To synthesize waveforms in the microwave frequency band, we are extending the existing Josephson arbitrary waveform synthesizer (JAWS) technology used for ac voltage metrology at audio frequencies (<;20 kHz). Using new microwave circuits and experimental techniques, we demonstrate JAWS-based synthesis of single-tone waveforms at 1 GHz, with -49 dBm output power and 79 dBc spur-free dynamic range (SFDR). To synthesize waveforms in the millimeter-wave frequency band, we are exploiting single flux quantum (SFQ) superconducting digital technology to design circuits that amplify SFQ pulses using a network of pulse splitters. With our initial SFQ-based circuit, we demonstrate synthesis of a 4-GHz sine wave with -74 dBm output power and 70 dBc SFDR.

IEEE Transactions on Applied Superconductivity•Mar 8, 2019•23 citations

Quantum-Based Modulated Microwave Waveforms

Akim A. Babenko, Nathan E. Flowers-Jacobs, Anna E. Fox +3 more

This article presents a superconducting voltage source that generates modulated microwave waveforms with quantum-based stability. The voltage source—an RF Josephson Arbitrary Waveform Synthesizer (RF-JAWS)—uses a superconducting IC with an array of 4500 series-connected Josephson junctions (JJs) that are embedded in a coplanar waveguide (CPW) transmission line. The JJs are driven with 100-ps wide current pulses that force each JJ to generate voltage pulses with a quantized integrated area. A pulse sequence is created using a delta-sigma ($\Delta $–$\Sigma $) algorithm to generate a 101-tone waveform with a 40-MHz instantaneous bandwidth around 1005 MHz with a flat power distribution of −53 dBm and a Schroeder phase distribution. The JJ’s quantum-based nonlinearity produces an amplitude stability with respect to various drive and bias parameters of ±0.005 dB and a detrended phase stability of ±0.05°. The stability of the source is verified without the need for calibrated measurements. Another$\Delta $–$\Sigma $pulse sequence generates a 10-MHz quadrature-phase shift-keying (QPSK) waveform on a 1005-MHz carrier that has the same stability and the mean error vector magnitude (EVM) of −48 dB. This work is a step toward creating a quantum-based reference source for power and cross-frequency phase calibrations, as well as a reference-modulated signal source for calibrating telecommunication links.

IEEE Transactions on Microwave Theory and Techniques•Aug 4, 2023•6 citations

Measuring VHF Detector Linearity using a Quantum-Based Source

Jeremy N. Thomas, Nathan E. Flowers-Jacobs, Anna E. Fox +2 more

We demonstrate the use of a Josephson Arbitrary Waveform Synthesizer (JAWS) for linearity measurements of two instruments: an RF power sensor and a fast ADC. The VHF-JAWS source consists of a chip with 12,810 Josephson junctions located in a cryocooler and driven to produce quantum-based ac waveforms at frequencies up to 50.05 MHz and power up to -19 dBm. We first confirm that the device is operating correctly by measuring the dc bias current quantum-locking range and then measure the system output power with an RF power sensor and a high-speed digitizer. After removing an overall scale factor, the ten-nanowatt scale differences between the programmed JAWS values and the measured values indicate better than ±0.5 % DUT linearity for frequencies in the VHF band.

Conference on Precision Electromagnetic Measurements•Jul 8, 2024•1 citation

Cryogenic Calibration of a Quantum-based Radio Frequency Source

Alírio Boaventura, Justus A. Brevik, Dylan Forrest Williams +5 more

We report on the calibration of quantum-based radio frequency waveforms generated by a Josephson arbitrary waveform synthesizer system. We measure these waveforms using a vector network analyzer and calibrate them at 4 K using a custom-designed cryogenic on-wafer multi-line thru-reflect-line calibration kit and a two-tier calibration procedure. The signals tested in this work can be used as reference signals to calibrate measurement instruments with potential benefits in terms of accuracy and flexibility compared to the conventional methods.

ARFTG Microwave Measurement Conference•Aug 4, 2020•5 citations
We compare the calculated, quantum-based output of a radio-frequency Josephson arbitrary waveform synthesizer (RF-JAWS) with its measured output that is calibrated through the established NIST RF power traceability path, a necessary first step towards quantum-based RF metrology. An array of 1,500 Josephson junctions (JJs) is used to synthesize sinusoids from 50MHz to 3GHz, each with a nominal output power of −49.67dBm and a demonstrated quantum-locking range (QLR) exceeding 1mA. We perform a two-tier calibration of two-port vector network analyzer (VNA) measurements of the RF-JAWS waveforms with uncertainty analysis: (1) the VNA wave parameters are referenced to a NIST-calibrated coaxial power sensor, and (2) a cryogenic probe station, together with on-chip superconducting calibration standards, establishes an on-chip reference plane at the JJ-array. The calibrated measurement of the forward- and backward-propagating power is compared with the expected, calculated outputs, and, after accounting for high-frequency roll-off, we observe agreement within the expanded (k=2) uncertainty limits for most frequencies.
We are developing a new instrument, the RF Josephson arbitrary waveform synthesizer (RF-JAWS), for communications metrology and quantum information applications. An important aspect of the RF-JAWS design is the accurate and traceable characterization of its superconducting devices. In this article, we present a procedure for characterizing microwave superconducting devices in a cryogenic RF probe station via a vector network analyzer (VNA) calibrated with a custom cryogenic calibration kit colocated with the superconducting device under test (DUT) in the cryogenic environment. By de-embedding lossy and dispersive RF interconnects linking the superconducting DUT to the measurement apparatus at room temperature, we characterize the DUT exactly at the cryogenic on-wafer reference plane. More importantly, we operate our VNA with an external modulated source and our procedure features metrology-grade multiline thru-reflect-line calibration and absolute power and phase corrections, as opposed to the more common relative scattering-parameter correction. In addition, we apply anX-parameter model to account for impedance mismatch in cryogenic Josephson microwave sources. Our techniques are also suitable for cryogenic characterization of microwave superconducting devices for solid-state quantum computers and could help to optimize the quantum-classical interfaces in these systems.
We report on the design, fabrication, and measurement of a very high frequency band Josephson arbitrary waveform synthesizer (VHF-JAWS) at frequencies from 1 kHz to 50.05 MHz. The VHF-JAWS chip is composed of a series array of 12 810 Josephson junctions (JJs) embedded in a superconducting coplanar waveguide. Each JJ responds to a pattern of current pulses by creating a corresponding pattern of voltage pulses, each with a time-integrated area related to fundamental constants ash/2e{{h/2e}}h/2e. The pulse patterns are chosen to produce quantum-based single-tone voltage waveforms with an open-circuit voltage of 50 mV rms (–19.03 dBm output power into 50Ω\OmegaΩload impedances) at frequencies up to 50.05 MHz, which is more than twice the voltage that has been generated by previous RF-JAWS designs at 1 GHz. The VHF-JAWS is “quantum-locked,” that is, it generates one quantized output voltage pulse per input current pulse per JJ while varying the dc current through the JJ array by at least 0.4 mA and the amplitude of the bias pulses by at least 10 %. We use the large bias pulse quantum-locking range to investigate one source of error in detail: the direct feedthrough of the current bias pulses into the DUT at VHF frequencies, which adds an unwanted, in-band component to the measured voltage. We reduce this error by high-pass filtering the current bias pulses and measure the error as a function of input pulse amplitude using two techniques: 1) by measuring small changes over the quantum-locking range and 2) by passively attenuating the input pulse amplitude so that the nonlinear JJs no longer generate voltage pulses while the error is only linearly scaled.
We review our development of Josephson-junction-based programmable reference sources to synthesize spectrally pure waveforms with quantum-based voltage accuracy for characterizing and improving future communication devices and systems. The goal is to provide sources that together span the entire radio frequency band, equivalent to seven orders of magnitude in frequency (20 kHz to 300 GHz). To synthesize waveforms in the microwave frequency band, we are extending the existing Josephson arbitrary waveform synthesizer (JAWS) technology used for ac voltage metrology at audio frequencies (<;20 kHz). Using new microwave circuits and experimental techniques, we demonstrate JAWS-based synthesis of single-tone waveforms at 1 GHz, with -49 dBm output power and 79 dBc spur-free dynamic range (SFDR). To synthesize waveforms in the millimeter-wave frequency band, we are exploiting single flux quantum (SFQ) superconducting digital technology to design circuits that amplify SFQ pulses using a network of pulse splitters. With our initial SFQ-based circuit, we demonstrate synthesis of a 4-GHz sine wave with -74 dBm output power and 70 dBc SFDR.
This article presents a superconducting voltage source that generates modulated microwave waveforms with quantum-based stability. The voltage source—an RF Josephson Arbitrary Waveform Synthesizer (RF-JAWS)—uses a superconducting IC with an array of 4500 series-connected Josephson junctions (JJs) that are embedded in a coplanar waveguide (CPW) transmission line. The JJs are driven with 100-ps wide current pulses that force each JJ to generate voltage pulses with a quantized integrated area. A pulse sequence is created using a delta-sigma ($\Delta –––\Sigma )algorithmtogeneratea101−tonewaveformwitha40−MHzinstantaneousbandwidtharound1005MHzwithaflatpowerdistributionof−53dBmandaSchroederphasedistribution.TheJJ’squantum−basednonlinearityproducesanamplitudestabilitywithrespecttovariousdriveandbiasparametersof±0.005dBandadetrendedphasestabilityof±0.05°.Thestabilityofthesourceisverifiedwithouttheneedforcalibratedmeasurements.Another) algorithm to generate a 101-tone waveform with a 40-MHz instantaneous bandwidth around 1005 MHz with a flat power distribution of −53 dBm and a Schroeder phase distribution. The JJ’s quantum-based nonlinearity produces an amplitude stability with respect to various drive and bias parameters of ±0.005 dB and a detrended phase stability of ±0.05°. The stability of the source is verified without the need for calibrated measurements. Another)algorithmtogeneratea101−tonewaveformwitha40−MHzinstantaneousbandwidtharound1005MHzwithaflatpowerdistributionof−53dBmandaSchroederphasedistribution.TheJJ’squantum−basednonlinearityproducesanamplitudestabilitywithrespecttovariousdriveandbiasparametersof±0.005dBandadetrendedphasestabilityof±0.05°.Thestabilityofthesourceisverifiedwithouttheneedforcalibratedmeasurements.Another\Delta –––\Sigma $pulse sequence generates a 10-MHz quadrature-phase shift-keying (QPSK) waveform on a 1005-MHz carrier that has the same stability and the mean error vector magnitude (EVM) of −48 dB. This work is a step toward creating a quantum-based reference source for power and cross-frequency phase calibrations, as well as a reference-modulated signal source for calibrating telecommunication links.
We demonstrate the use of a Josephson Arbitrary Waveform Synthesizer (JAWS) for linearity measurements of two instruments: an RF power sensor and a fast ADC. The VHF-JAWS source consists of a chip with 12,810 Josephson junctions located in a cryocooler and driven to produce quantum-based ac waveforms at frequencies up to 50.05 MHz and power up to -19 dBm. We first confirm that the device is operating correctly by measuring the dc bias current quantum-locking range and then measure the system output power with an RF power sensor and a high-speed digitizer. After removing an overall scale factor, the ten-nanowatt scale differences between the programmed JAWS values and the measured values indicate better than ±0.5 % DUT linearity for frequencies in the VHF band.
We report on the calibration of quantum-based radio frequency waveforms generated by a Josephson arbitrary waveform synthesizer system. We measure these waveforms using a vector network analyzer and calibrate them at 4 K using a custom-designed cryogenic on-wafer multi-line thru-reflect-line calibration kit and a two-tier calibration procedure. The signals tested in this work can be used as reference signals to calibrate measurement instruments with potential benefits in terms of accuracy and flexibility compared to the conventional methods.