Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

RF Waveform Synthesizers With Quantum-Based Voltage Accuracy for Communications Metrology

P. F. Hopkins, Justus A. Brevik, Manuel A. Castellanos-Beltran, Christine A. Donnelly, Nathan E. Flowers-Jacobs, Anna E. Fox, David I. Olaya, Paul D. Dresselhaus, Samuel P. Benz

Published Mar 8, 2019• 22 citations
Publisher

Abstract

We review our development of Josephson-junction-based programmable reference sources to synthesize spectrally pure waveforms with quantum-based voltage accuracy for characterizing and improving future communication devices and systems. The goal is to provide sources that together span the entire radio frequency band, equivalent to seven orders of magnitude in frequency (20 kHz to 300 GHz). To synthesize waveforms in the microwave frequency band, we are extending the existing Josephson arbitrary waveform synthesizer (JAWS) technology used for ac voltage metrology at audio frequencies (<;20 kHz). Using new microwave circuits and experimental techniques, we demonstrate JAWS-based synthesis of single-tone waveforms at 1 GHz, with -49 dBm output power and 79 dBc spur-free dynamic range (SFDR). To synthesize waveforms in the millimeter-wave frequency band, we are exploiting single flux quantum (SFQ) superconducting digital technology to design circuits that amplify SFQ pulses using a network of pulse splitters. With our initial SFQ-based circuit, we demonstrate synthesis of a 4-GHz sine wave with -74 dBm output power and 70 dBc SFDR.

DOI
10.1109/tasc.2019.2898407

Related papers

1 GHz Waveform Synthesis With Josephson Junction Arrays

Christine A. Donnelly, Nathan E. Flowers-Jacobs, Justus A. Brevik +4 more

We synthesize single- and multiple-tone waveforms at gigahertz frequencies from arrays of Josephson junctions and demonstrate their quantum-locked operation over a range of experimental input parameters. We first use a lumped-element circuit to synthesize 1 and 2 GHz single-tone waveforms with -71 dBm output power and in-band spurious-free dynamic range (SFDR) of -66 dBc. We then introduce a narrow-band diplexer circuit and synthesize a 1 GHz sinusoid with higher power (-49 dBm) and in-band SFDR of -79 dBc. To demonstrate the spectrally selective power- and phase-programmability of the diplexer circuit, we also synthesize multisine waveforms with total waveform power of -51 dBm. The spectral purity of the reported waveforms is limited by the room-temperature electronics rather than by the quantized pulse-based synthesis technique. This article provides direction for future circuit designs and uncovers the main factors that must be addressed to achieve higher power, higher spectral purity, and improved output power accuracy. The reported results represent significant progress towards a JAWS-based primary RF reference source that synthesizes programmable, quantum-referenced, low-distortion signals at gigahertz frequencies.

IEEE Transactions on Applied Superconductivity•Jul 31, 2019•21 citations

Single-Flux-Quantum Multiplier Circuits for Synthesizing Gigahertz Waveforms With Quantum-Based Accuracy

Manuel A. Castellanos-Beltran, David I. Olaya, Adam J. Sirois +4 more

We designed, simulated, and experimentally demonstrated components for a microwave-frequency digital-to-analog converter based on single flux quantum (SFQ) circuits and an amplifier based on superconducting-quantum-interference-device (SQUID) stacks. These are key components for a self-calibrated programmable waveform reference for communications metrology capable of synthesizing high-frequency signals with quantumbased output accuracy. The amplifier is an SFQ voltage multiplier circuit that consists of a network of SFQ-splitters and SQUID transformers that provides output signals consisting of quantized pulses. The circuits were fabricated using our Nb/NbxSi1-x/Nb Josephson-junction (JJ) fabrication process, which produces selfshunted JJs with Nb-doped silicon barriers. In order to demonstrate quantum-based reproducibility, stability and performance at 4 K, we synthesized single-tone and multitone waveforms at gigahertz frequencies and demonstrated their operation over a range of synthesizer output and experimental bias parameters. We also propose circuit designs for achieving higher synthesis frequencies and higher output power with improved power accuracy and spectral purity, and discuss the potential limitations of these circuits.

IEEE Transactions on Applied Superconductivity•Feb 3, 2021•14 citations

A Microwave Quantum-Defined Millivolt Source

Akim A. Babenko, Nathan E. Flowers-Jacobs, Gregor Lasser +5 more

We demonstrate a tenfold increase in the amplitude of microwave-frequency waveforms generated by a quantum-defined superconducting voltage source, with an open-circuit signal of 17.56 mV rms at 1.005 GHz. The voltage source is an RF Josephson arbitrary waveform synthesizer (RF-JAWS) that utilizes a circuit that is cooled to 4 K and is composed of an array of 4500 Josephson junctions. These junctions are connected in series along the center conductor of a 50-$\Omega $superconducting coplanar waveguide transmission line. We introduce a new zero-forcing equalization technique for reducing distortion in drive current pulse patterns. This technique allows an increase in the amplitude of the quantum-based voltage waveforms while suppressing parasitic feedthrough signals to −75 dBc. Synthesizing a two-tone delta–sigma waveform, we monitor an audio-frequency 10-kHz tone of less than 100-$\mu \text{V}$rms amplitude while simultaneously measuring the 1.005-GHz tone of −28.12-dBm power in a 50-$\Omega $environment. The two-tone synthesis allows simultaneous verification of correct operation of the voltage source using time-efficient low-frequency measurement techniques as well as slower microwave measurements.

IEEE Transactions on Microwave Theory and Techniques•Nov 1, 2021•10 citations

VHF Josephson Arbitrary Waveform Synthesizer

Jeremy N. Thomas, Nathan E. Flowers-Jacobs, Anna E. Fox +3 more

We report on the design, fabrication, and measurement of a very high frequency band Josephson arbitrary waveform synthesizer (VHF-JAWS) at frequencies from 1 kHz to 50.05 MHz. The VHF-JAWS chip is composed of a series array of 12 810 Josephson junctions (JJs) embedded in a superconducting coplanar waveguide. Each JJ responds to a pattern of current pulses by creating a corresponding pattern of voltage pulses, each with a time-integrated area related to fundamental constants as${{h/2e}}$. The pulse patterns are chosen to produce quantum-based single-tone voltage waveforms with an open-circuit voltage of 50 mV rms (–19.03 dBm output power into 50$\Omega$load impedances) at frequencies up to 50.05 MHz, which is more than twice the voltage that has been generated by previous RF-JAWS designs at 1 GHz. The VHF-JAWS is “quantum-locked,” that is, it generates one quantized output voltage pulse per input current pulse per JJ while varying the dc current through the JJ array by at least 0.4 mA and the amplitude of the bias pulses by at least 10 %. We use the large bias pulse quantum-locking range to investigate one source of error in detail: the direct feedthrough of the current bias pulses into the DUT at VHF frequencies, which adds an unwanted, in-band component to the measured voltage. We reduce this error by high-pass filtering the current bias pulses and measure the error as a function of input pulse amplitude using two techniques: 1) by measuring small changes over the quantum-locking range and 2) by passively attenuating the input pulse amplitude so that the nonlinear JJs no longer generate voltage pulses while the error is only linearly scaled.

IEEE Transactions on Applied Superconductivity•Jul 1, 2024•8 citations

RF Josephson Arbitrary Waveform Synthesizer With Integrated Superconducting Diplexers

Akim A. Babenko, Nathan E. Flowers-Jacobs, Gregor Lasser +5 more

We present the design and characterization of a broadband RF Josephson arbitrary waveform synthesizer (RF-JAWS) with a series array of 4500 Josephson junctions (JJs) and integrated low-pass/high-pass five-pole superconducting diplexers. The integrated diplexers enable broadband filtering of the feedthrough signal components in the drive-current pulses with decade-wide instantaneous bandwidth. The diplexers have at least 30 GHz passband with less than 0.8 dB insertion loss. The JJ array is driven with a delta-sigma pulse sequence that encodes 10 kHz and 1.005 GHz tones, and generates an open-circuit voltage of 22 mV rms (−26.18 dBm available power assuming a 50$\mathrm{\Omega }$Thevenin equivalent source) at 1.005 GHz—a 25% increase compared to the state of the art. The drive current pulses undergo a three-step equalization to compensate for the linear distortion of the room-temperature electronics, the on-chip diplexers, and the remaining on- and off-chip components. The measured parasitic feedthrough voltages at 1.005 GHz are around −33 dBc, and their effect on the quantum locking ranges (QLRs) is quantified by measurements. The results demonstrated in this article show a significant step toward a broadband, integrated, quantum-based microwave voltage source with useful power above −30 dBm.

IEEE Transactions on Applied Superconductivity•Aug 24, 2022•7 citations

Josephson-based quantum voltage standards – an ongoing success story

Ralf Behr, Stephan Bauer, Marco Kraus +2 more

The past few decades have witnessed great progress being made from the first voltage standards based on arrays of Josephson junctions. Continuous improvements in the fabrication process have increased the quality and “user-friendliness” of these superconducting circuits. Combined with the improvements in measuring electronics, the range of applications of Josephson-based measurements with unmatched precision has extended from DC into AC voltage metrology for signal frequencies up to 500 kHz. In this poster we will present several Josephson-based measurement systems developed for metrology applications. Two versions of quantum AC standards will be used as Josephson references: Programmable Josephson Voltage Standards (PJVS), which are based on serial arrays with up to 300,000 Josephson junctions, and pulse-driven arrays with more than 50,000 junctions, typically referred to as Josephson Arbitrary Waveform Synthesizers (JAWS). PJVS can reach amplitudes of up to 80 V, while pulse-driven arrays can reach up to 1 V or even 4 V. The advantage of pulse-driven Josephson voltage standards is that they are ideally suited as quantum-based voltage synthesizers for arbitrary waveforms or sine waves with high spectral purity. Therefore, they can be used directly to characterize or calibrate ADCs. In addition, JAWS are particularly useful in Josephson impedance bridges, which perform automated impedance calibrations at the 10-9 uncertainty level over a wide frequency range from 50 Hz to 80 kHz in a single bridge. We will further show how PJVS are used in commercial quantum voltmeters for DC and AC voltages and are typically used as quantum voltage references in measurement systems. Using differential sampling based on PJVS, uncertainties at the level of a few parts in 108 for frequencies up to the kHz range can be achieved. Such quantum-based AC voltage calibrations are at least 30 times faster than conventional AC-DC transfer and offer even better uncertainties. This idea has been quickly adopted by many National Metrology Institutes to establish such systems for AC voltage calibrations. As an example, the BIPM will now start worldwide onsite comparisons to ensure the uniformity of the new method which we introduced in 2006. But developments continue. Recently, a sub-sampling technique was used to extend the frequency range of the AC quantum voltmeter to up to 100 kHz with uncertainties below 5 parts in 106. In addition, a novel method, also for differential sampling, enables the measurement of arbitrary waveforms and the calibration of specific tones. Our poster will provide an overview of these Josephson-based metrological applications and present the latest developments from this fast-developing area.

•Jan 1, 2025•0 citations
We review our development of Josephson-junction-based programmable reference sources to synthesize spectrally pure waveforms with quantum-based voltage accuracy for characterizing and improving future communication devices and systems. The goal is to provide sources that together span the entire radio frequency band, equivalent to seven orders of magnitude in frequency (20 kHz to 300 GHz). To synthesize waveforms in the microwave frequency band, we are extending the existing Josephson arbitrary waveform synthesizer (JAWS) technology used for ac voltage metrology at audio frequencies (<;20 kHz). Using new microwave circuits and experimental techniques, we demonstrate JAWS-based synthesis of single-tone waveforms at 1 GHz, with -49 dBm output power and 79 dBc spur-free dynamic range (SFDR). To synthesize waveforms in the millimeter-wave frequency band, we are exploiting single flux quantum (SFQ) superconducting digital technology to design circuits that amplify SFQ pulses using a network of pulse splitters. With our initial SFQ-based circuit, we demonstrate synthesis of a 4-GHz sine wave with -74 dBm output power and 70 dBc SFDR.
We synthesize single- and multiple-tone waveforms at gigahertz frequencies from arrays of Josephson junctions and demonstrate their quantum-locked operation over a range of experimental input parameters. We first use a lumped-element circuit to synthesize 1 and 2 GHz single-tone waveforms with -71 dBm output power and in-band spurious-free dynamic range (SFDR) of -66 dBc. We then introduce a narrow-band diplexer circuit and synthesize a 1 GHz sinusoid with higher power (-49 dBm) and in-band SFDR of -79 dBc. To demonstrate the spectrally selective power- and phase-programmability of the diplexer circuit, we also synthesize multisine waveforms with total waveform power of -51 dBm. The spectral purity of the reported waveforms is limited by the room-temperature electronics rather than by the quantized pulse-based synthesis technique. This article provides direction for future circuit designs and uncovers the main factors that must be addressed to achieve higher power, higher spectral purity, and improved output power accuracy. The reported results represent significant progress towards a JAWS-based primary RF reference source that synthesizes programmable, quantum-referenced, low-distortion signals at gigahertz frequencies.
We designed, simulated, and experimentally demonstrated components for a microwave-frequency digital-to-analog converter based on single flux quantum (SFQ) circuits and an amplifier based on superconducting-quantum-interference-device (SQUID) stacks. These are key components for a self-calibrated programmable waveform reference for communications metrology capable of synthesizing high-frequency signals with quantumbased output accuracy. The amplifier is an SFQ voltage multiplier circuit that consists of a network of SFQ-splitters and SQUID transformers that provides output signals consisting of quantized pulses. The circuits were fabricated using our Nb/NbxSi1-x/Nb Josephson-junction (JJ) fabrication process, which produces selfshunted JJs with Nb-doped silicon barriers. In order to demonstrate quantum-based reproducibility, stability and performance at 4 K, we synthesized single-tone and multitone waveforms at gigahertz frequencies and demonstrated their operation over a range of synthesizer output and experimental bias parameters. We also propose circuit designs for achieving higher synthesis frequencies and higher output power with improved power accuracy and spectral purity, and discuss the potential limitations of these circuits.
We demonstrate a tenfold increase in the amplitude of microwave-frequency waveforms generated by a quantum-defined superconducting voltage source, with an open-circuit signal of 17.56 mV rms at 1.005 GHz. The voltage source is an RF Josephson arbitrary waveform synthesizer (RF-JAWS) that utilizes a circuit that is cooled to 4 K and is composed of an array of 4500 Josephson junctions. These junctions are connected in series along the center conductor of a 50-$\Omega superconductingcoplanarwaveguidetransmissionline.Weintroduceanewzero−forcingequalizationtechniqueforreducingdistortionindrivecurrentpulsepatterns.Thistechniqueallowsanincreaseintheamplitudeofthequantum−basedvoltagewaveformswhilesuppressingparasiticfeedthroughsignalsto−75dBc.Synthesizingatwo−tonedelta–sigmawaveform,wemonitoranaudio−frequency10−kHztoneoflessthan100−superconducting coplanar waveguide transmission line. We introduce a new zero-forcing equalization technique for reducing distortion in drive current pulse patterns. This technique allows an increase in the amplitude of the quantum-based voltage waveforms while suppressing parasitic feedthrough signals to −75 dBc. Synthesizing a two-tone delta–sigma waveform, we monitor an audio-frequency 10-kHz tone of less than 100-superconductingcoplanarwaveguidetransmissionline.Weintroduceanewzero−forcingequalizationtechniqueforreducingdistortionindrivecurrentpulsepatterns.Thistechniqueallowsanincreaseintheamplitudeofthequantum−basedvoltagewaveformswhilesuppressingparasiticfeedthroughsignalsto−75dBc.Synthesizingatwo−tonedelta–sigmawaveform,wemonitoranaudio−frequency10−kHztoneoflessthan100−\mu \text{V}rmsamplitudewhilesimultaneouslymeasuringthe1.005−GHztoneof−28.12−dBmpowerina50−rms amplitude while simultaneously measuring the 1.005-GHz tone of −28.12-dBm power in a 50-rmsamplitudewhilesimultaneouslymeasuringthe1.005−GHztoneof−28.12−dBmpowerina50−\Omega $environment. The two-tone synthesis allows simultaneous verification of correct operation of the voltage source using time-efficient low-frequency measurement techniques as well as slower microwave measurements.
We report on the design, fabrication, and measurement of a very high frequency band Josephson arbitrary waveform synthesizer (VHF-JAWS) at frequencies from 1 kHz to 50.05 MHz. The VHF-JAWS chip is composed of a series array of 12 810 Josephson junctions (JJs) embedded in a superconducting coplanar waveguide. Each JJ responds to a pattern of current pulses by creating a corresponding pattern of voltage pulses, each with a time-integrated area related to fundamental constants ash/2e{{h/2e}}h/2e. The pulse patterns are chosen to produce quantum-based single-tone voltage waveforms with an open-circuit voltage of 50 mV rms (–19.03 dBm output power into 50Ω\OmegaΩload impedances) at frequencies up to 50.05 MHz, which is more than twice the voltage that has been generated by previous RF-JAWS designs at 1 GHz. The VHF-JAWS is “quantum-locked,” that is, it generates one quantized output voltage pulse per input current pulse per JJ while varying the dc current through the JJ array by at least 0.4 mA and the amplitude of the bias pulses by at least 10 %. We use the large bias pulse quantum-locking range to investigate one source of error in detail: the direct feedthrough of the current bias pulses into the DUT at VHF frequencies, which adds an unwanted, in-band component to the measured voltage. We reduce this error by high-pass filtering the current bias pulses and measure the error as a function of input pulse amplitude using two techniques: 1) by measuring small changes over the quantum-locking range and 2) by passively attenuating the input pulse amplitude so that the nonlinear JJs no longer generate voltage pulses while the error is only linearly scaled.
We present the design and characterization of a broadband RF Josephson arbitrary waveform synthesizer (RF-JAWS) with a series array of 4500 Josephson junctions (JJs) and integrated low-pass/high-pass five-pole superconducting diplexers. The integrated diplexers enable broadband filtering of the feedthrough signal components in the drive-current pulses with decade-wide instantaneous bandwidth. The diplexers have at least 30 GHz passband with less than 0.8 dB insertion loss. The JJ array is driven with a delta-sigma pulse sequence that encodes 10 kHz and 1.005 GHz tones, and generates an open-circuit voltage of 22 mV rms (−26.18 dBm available power assuming a 50Ω\mathrm{\Omega }ΩThevenin equivalent source) at 1.005 GHz—a 25% increase compared to the state of the art. The drive current pulses undergo a three-step equalization to compensate for the linear distortion of the room-temperature electronics, the on-chip diplexers, and the remaining on- and off-chip components. The measured parasitic feedthrough voltages at 1.005 GHz are around −33 dBc, and their effect on the quantum locking ranges (QLRs) is quantified by measurements. The results demonstrated in this article show a significant step toward a broadband, integrated, quantum-based microwave voltage source with useful power above −30 dBm.
The past few decades have witnessed great progress being made from the first voltage standards based on arrays of Josephson junctions. Continuous improvements in the fabrication process have increased the quality and “user-friendliness” of these superconducting circuits. Combined with the improvements in measuring electronics, the range of applications of Josephson-based measurements with unmatched precision has extended from DC into AC voltage metrology for signal frequencies up to 500 kHz. In this poster we will present several Josephson-based measurement systems developed for metrology applications. Two versions of quantum AC standards will be used as Josephson references: Programmable Josephson Voltage Standards (PJVS), which are based on serial arrays with up to 300,000 Josephson junctions, and pulse-driven arrays with more than 50,000 junctions, typically referred to as Josephson Arbitrary Waveform Synthesizers (JAWS). PJVS can reach amplitudes of up to 80 V, while pulse-driven arrays can reach up to 1 V or even 4 V. The advantage of pulse-driven Josephson voltage standards is that they are ideally suited as quantum-based voltage synthesizers for arbitrary waveforms or sine waves with high spectral purity. Therefore, they can be used directly to characterize or calibrate ADCs. In addition, JAWS are particularly useful in Josephson impedance bridges, which perform automated impedance calibrations at the 10-9 uncertainty level over a wide frequency range from 50 Hz to 80 kHz in a single bridge. We will further show how PJVS are used in commercial quantum voltmeters for DC and AC voltages and are typically used as quantum voltage references in measurement systems. Using differential sampling based on PJVS, uncertainties at the level of a few parts in 108 for frequencies up to the kHz range can be achieved. Such quantum-based AC voltage calibrations are at least 30 times faster than conventional AC-DC transfer and offer even better uncertainties. This idea has been quickly adopted by many National Metrology Institutes to establish such systems for AC voltage calibrations. As an example, the BIPM will now start worldwide onsite comparisons to ensure the uniformity of the new method which we introduced in 2006. But developments continue. Recently, a sub-sampling technique was used to extend the frequency range of the AC quantum voltmeter to up to 100 kHz with uncertainties below 5 parts in 106. In addition, a novel method, also for differential sampling, enables the measurement of arbitrary waveforms and the calibration of specific tones. Our poster will provide an overview of these Josephson-based metrological applications and present the latest developments from this fast-developing area.