Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Microwave Theory and Techniques

A Microwave Quantum-Defined Millivolt Source

Akim A. Babenko, Nathan E. Flowers-Jacobs, Gregor Lasser, Justus A. Brevik, Anna E. Fox, Paul D. Dresselhaus, Zoya B. Popovic, Samuel P. Benz

Published Nov 1, 2021• 10 citations
Publisher

Abstract

We demonstrate a tenfold increase in the amplitude of microwave-frequency waveforms generated by a quantum-defined superconducting voltage source, with an open-circuit signal of 17.56 mV rms at 1.005 GHz. The voltage source is an RF Josephson arbitrary waveform synthesizer (RF-JAWS) that utilizes a circuit that is cooled to 4 K and is composed of an array of 4500 Josephson junctions. These junctions are connected in series along the center conductor of a 50-$\Omega $superconducting coplanar waveguide transmission line. We introduce a new zero-forcing equalization technique for reducing distortion in drive current pulse patterns. This technique allows an increase in the amplitude of the quantum-based voltage waveforms while suppressing parasitic feedthrough signals to −75 dBc. Synthesizing a two-tone delta–sigma waveform, we monitor an audio-frequency 10-kHz tone of less than 100-$\mu \text{V}$rms amplitude while simultaneously measuring the 1.005-GHz tone of −28.12-dBm power in a 50-$\Omega $environment. The two-tone synthesis allows simultaneous verification of correct operation of the voltage source using time-efficient low-frequency measurement techniques as well as slower microwave measurements.

DOI
10.1109/tmtt.2021.3121425

Related papers

Quantum-Based Modulated Microwave Waveforms

Akim A. Babenko, Nathan E. Flowers-Jacobs, Anna E. Fox +3 more

This article presents a superconducting voltage source that generates modulated microwave waveforms with quantum-based stability. The voltage source—an RF Josephson Arbitrary Waveform Synthesizer (RF-JAWS)—uses a superconducting IC with an array of 4500 series-connected Josephson junctions (JJs) that are embedded in a coplanar waveguide (CPW) transmission line. The JJs are driven with 100-ps wide current pulses that force each JJ to generate voltage pulses with a quantized integrated area. A pulse sequence is created using a delta-sigma ($\Delta $–$\Sigma $) algorithm to generate a 101-tone waveform with a 40-MHz instantaneous bandwidth around 1005 MHz with a flat power distribution of −53 dBm and a Schroeder phase distribution. The JJ’s quantum-based nonlinearity produces an amplitude stability with respect to various drive and bias parameters of ±0.005 dB and a detrended phase stability of ±0.05°. The stability of the source is verified without the need for calibrated measurements. Another$\Delta $–$\Sigma $pulse sequence generates a 10-MHz quadrature-phase shift-keying (QPSK) waveform on a 1005-MHz carrier that has the same stability and the mean error vector magnitude (EVM) of −48 dB. This work is a step toward creating a quantum-based reference source for power and cross-frequency phase calibrations, as well as a reference-modulated signal source for calibrating telecommunication links.

IEEE Transactions on Microwave Theory and Techniques•Aug 4, 2023•5 citations

VHF Josephson Arbitrary Waveform Synthesizer

Jeremy N. Thomas, Nathan E. Flowers-Jacobs, Anna E. Fox +3 more

We report on the design, fabrication, and measurement of a very high frequency band Josephson arbitrary waveform synthesizer (VHF-JAWS) at frequencies from 1 kHz to 50.05 MHz. The VHF-JAWS chip is composed of a series array of 12 810 Josephson junctions (JJs) embedded in a superconducting coplanar waveguide. Each JJ responds to a pattern of current pulses by creating a corresponding pattern of voltage pulses, each with a time-integrated area related to fundamental constants as${{h/2e}}$. The pulse patterns are chosen to produce quantum-based single-tone voltage waveforms with an open-circuit voltage of 50 mV rms (–19.03 dBm output power into 50$\Omega$load impedances) at frequencies up to 50.05 MHz, which is more than twice the voltage that has been generated by previous RF-JAWS designs at 1 GHz. The VHF-JAWS is “quantum-locked,” that is, it generates one quantized output voltage pulse per input current pulse per JJ while varying the dc current through the JJ array by at least 0.4 mA and the amplitude of the bias pulses by at least 10 %. We use the large bias pulse quantum-locking range to investigate one source of error in detail: the direct feedthrough of the current bias pulses into the DUT at VHF frequencies, which adds an unwanted, in-band component to the measured voltage. We reduce this error by high-pass filtering the current bias pulses and measure the error as a function of input pulse amplitude using two techniques: 1) by measuring small changes over the quantum-locking range and 2) by passively attenuating the input pulse amplitude so that the nonlinear JJs no longer generate voltage pulses while the error is only linearly scaled.

IEEE Transactions on Applied Superconductivity•Jul 1, 2024•8 citations

RF Waveform Synthesizers With Quantum-Based Voltage Accuracy for Communications Metrology

P. F. Hopkins, Justus A. Brevik, Manuel A. Castellanos-Beltran +6 more

We review our development of Josephson-junction-based programmable reference sources to synthesize spectrally pure waveforms with quantum-based voltage accuracy for characterizing and improving future communication devices and systems. The goal is to provide sources that together span the entire radio frequency band, equivalent to seven orders of magnitude in frequency (20 kHz to 300 GHz). To synthesize waveforms in the microwave frequency band, we are extending the existing Josephson arbitrary waveform synthesizer (JAWS) technology used for ac voltage metrology at audio frequencies (<;20 kHz). Using new microwave circuits and experimental techniques, we demonstrate JAWS-based synthesis of single-tone waveforms at 1 GHz, with -49 dBm output power and 79 dBc spur-free dynamic range (SFDR). To synthesize waveforms in the millimeter-wave frequency band, we are exploiting single flux quantum (SFQ) superconducting digital technology to design circuits that amplify SFQ pulses using a network of pulse splitters. With our initial SFQ-based circuit, we demonstrate synthesis of a 4-GHz sine wave with -74 dBm output power and 70 dBc SFDR.

IEEE Transactions on Applied Superconductivity•Mar 8, 2019•22 citations

RF Josephson Arbitrary Waveform Synthesizer With Integrated Superconducting Diplexers

Akim A. Babenko, Nathan E. Flowers-Jacobs, Gregor Lasser +5 more

We present the design and characterization of a broadband RF Josephson arbitrary waveform synthesizer (RF-JAWS) with a series array of 4500 Josephson junctions (JJs) and integrated low-pass/high-pass five-pole superconducting diplexers. The integrated diplexers enable broadband filtering of the feedthrough signal components in the drive-current pulses with decade-wide instantaneous bandwidth. The diplexers have at least 30 GHz passband with less than 0.8 dB insertion loss. The JJ array is driven with a delta-sigma pulse sequence that encodes 10 kHz and 1.005 GHz tones, and generates an open-circuit voltage of 22 mV rms (−26.18 dBm available power assuming a 50$\mathrm{\Omega }$Thevenin equivalent source) at 1.005 GHz—a 25% increase compared to the state of the art. The drive current pulses undergo a three-step equalization to compensate for the linear distortion of the room-temperature electronics, the on-chip diplexers, and the remaining on- and off-chip components. The measured parasitic feedthrough voltages at 1.005 GHz are around −33 dBc, and their effect on the quantum locking ranges (QLRs) is quantified by measurements. The results demonstrated in this article show a significant step toward a broadband, integrated, quantum-based microwave voltage source with useful power above −30 dBm.

IEEE Transactions on Applied Superconductivity•Aug 24, 2022•7 citations

One-Volt Josephson Arbitrary Waveform Synthesizer

Samuel P. Benz, Steven B. Waltman, Anna E. Fox +6 more

A quantum-accurate waveform with an rms output amplitude of 1 V has been synthesized for the first time. This fourfold increase in voltage over previous systems was achieved through developments and improvements in bias electronics, pulse-bias techniques, Josephson junction array circuit fabrication, and packaging. A recently described ac-coupled bipolar pulse-bias technique was used to bias a superconducting integrated circuit with 25 600 junctions, which are equally divided into four series-connected arrays, into the second quantum state. We describe these advancements and present the measured 1 V spectra for 2 Hz and 10 Hz sine waves that remained quantized over a 0.4 mA current range. We also demonstrate a 2 kHz sine wave produced with another bias technique that requires no compensation current and remains quantized at an rms voltage of 128 mV over a 1 mA current range. Increasing the clock frequency to 19 GHz also allowed us to achieve a maximum rms output voltage for a single array of 330 mV.

IEEE Transactions on Applied Superconductivity•Sep 17, 2014•60 citations

Precision Measurements Using a 300 mV Josephson Arbitrary Waveform Synthesizer

Samuel P. Benz, Paul D. Dresselhaus, Charles J. Burroughs +1 more

We have developed a Josephson digital-to-analog converter, otherwise know as a Josephson arbitrary waveform synthesizer, with 300 mV peak output voltage. This is the first system of its kind with demonstrated quantum accuracy. We show precision synthesized waveforms from dc to 100 kHz with measured distortion and harmonic content below 115 dBc (dB below the carrier or fundamental). The heart of the system is a superconducting microwave integrated circuit with two Josephson junction arrays biased in parallel for the microwave drive and connected in series to double the voltage for the audio frequency output waveforms. New superconducting integrated circuits with twice as many stacked junctions and improved microwave circuits have allowed us to more than double the output voltage of our recent system. We also demonstrate that quantum-based synthesized arbitrary waveforms (not just sine waves) can be used for precision measurements of a high-performance commercial analog-to-digital converter.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•50 citations
We demonstrate a tenfold increase in the amplitude of microwave-frequency waveforms generated by a quantum-defined superconducting voltage source, with an open-circuit signal of 17.56 mV rms at 1.005 GHz. The voltage source is an RF Josephson arbitrary waveform synthesizer (RF-JAWS) that utilizes a circuit that is cooled to 4 K and is composed of an array of 4500 Josephson junctions. These junctions are connected in series along the center conductor of a 50-Ω\Omega Ωsuperconducting coplanar waveguide transmission line. We introduce a new zero-forcing equalization technique for reducing distortion in drive current pulse patterns. This technique allows an increase in the amplitude of the quantum-based voltage waveforms while suppressing parasitic feedthrough signals to −75 dBc. Synthesizing a two-tone delta–sigma waveform, we monitor an audio-frequency 10-kHz tone of less than 100-μV\mu \text{V}μVrms amplitude while simultaneously measuring the 1.005-GHz tone of −28.12-dBm power in a 50-Ω\Omega Ωenvironment. The two-tone synthesis allows simultaneous verification of correct operation of the voltage source using time-efficient low-frequency measurement techniques as well as slower microwave measurements.
This article presents a superconducting voltage source that generates modulated microwave waveforms with quantum-based stability. The voltage source—an RF Josephson Arbitrary Waveform Synthesizer (RF-JAWS)—uses a superconducting IC with an array of 4500 series-connected Josephson junctions (JJs) that are embedded in a coplanar waveguide (CPW) transmission line. The JJs are driven with 100-ps wide current pulses that force each JJ to generate voltage pulses with a quantized integrated area. A pulse sequence is created using a delta-sigma ($\Delta –––\Sigma )algorithmtogeneratea101−tonewaveformwitha40−MHzinstantaneousbandwidtharound1005MHzwithaflatpowerdistributionof−53dBmandaSchroederphasedistribution.TheJJ’squantum−basednonlinearityproducesanamplitudestabilitywithrespecttovariousdriveandbiasparametersof±0.005dBandadetrendedphasestabilityof±0.05°.Thestabilityofthesourceisverifiedwithouttheneedforcalibratedmeasurements.Another) algorithm to generate a 101-tone waveform with a 40-MHz instantaneous bandwidth around 1005 MHz with a flat power distribution of −53 dBm and a Schroeder phase distribution. The JJ’s quantum-based nonlinearity produces an amplitude stability with respect to various drive and bias parameters of ±0.005 dB and a detrended phase stability of ±0.05°. The stability of the source is verified without the need for calibrated measurements. Another)algorithmtogeneratea101−tonewaveformwitha40−MHzinstantaneousbandwidtharound1005MHzwithaflatpowerdistributionof−53dBmandaSchroederphasedistribution.TheJJ’squantum−basednonlinearityproducesanamplitudestabilitywithrespecttovariousdriveandbiasparametersof±0.005dBandadetrendedphasestabilityof±0.05°.Thestabilityofthesourceisverifiedwithouttheneedforcalibratedmeasurements.Another\Delta –––\Sigma $pulse sequence generates a 10-MHz quadrature-phase shift-keying (QPSK) waveform on a 1005-MHz carrier that has the same stability and the mean error vector magnitude (EVM) of −48 dB. This work is a step toward creating a quantum-based reference source for power and cross-frequency phase calibrations, as well as a reference-modulated signal source for calibrating telecommunication links.
We report on the design, fabrication, and measurement of a very high frequency band Josephson arbitrary waveform synthesizer (VHF-JAWS) at frequencies from 1 kHz to 50.05 MHz. The VHF-JAWS chip is composed of a series array of 12 810 Josephson junctions (JJs) embedded in a superconducting coplanar waveguide. Each JJ responds to a pattern of current pulses by creating a corresponding pattern of voltage pulses, each with a time-integrated area related to fundamental constants ash/2e{{h/2e}}h/2e. The pulse patterns are chosen to produce quantum-based single-tone voltage waveforms with an open-circuit voltage of 50 mV rms (–19.03 dBm output power into 50Ω\OmegaΩload impedances) at frequencies up to 50.05 MHz, which is more than twice the voltage that has been generated by previous RF-JAWS designs at 1 GHz. The VHF-JAWS is “quantum-locked,” that is, it generates one quantized output voltage pulse per input current pulse per JJ while varying the dc current through the JJ array by at least 0.4 mA and the amplitude of the bias pulses by at least 10 %. We use the large bias pulse quantum-locking range to investigate one source of error in detail: the direct feedthrough of the current bias pulses into the DUT at VHF frequencies, which adds an unwanted, in-band component to the measured voltage. We reduce this error by high-pass filtering the current bias pulses and measure the error as a function of input pulse amplitude using two techniques: 1) by measuring small changes over the quantum-locking range and 2) by passively attenuating the input pulse amplitude so that the nonlinear JJs no longer generate voltage pulses while the error is only linearly scaled.
We review our development of Josephson-junction-based programmable reference sources to synthesize spectrally pure waveforms with quantum-based voltage accuracy for characterizing and improving future communication devices and systems. The goal is to provide sources that together span the entire radio frequency band, equivalent to seven orders of magnitude in frequency (20 kHz to 300 GHz). To synthesize waveforms in the microwave frequency band, we are extending the existing Josephson arbitrary waveform synthesizer (JAWS) technology used for ac voltage metrology at audio frequencies (<;20 kHz). Using new microwave circuits and experimental techniques, we demonstrate JAWS-based synthesis of single-tone waveforms at 1 GHz, with -49 dBm output power and 79 dBc spur-free dynamic range (SFDR). To synthesize waveforms in the millimeter-wave frequency band, we are exploiting single flux quantum (SFQ) superconducting digital technology to design circuits that amplify SFQ pulses using a network of pulse splitters. With our initial SFQ-based circuit, we demonstrate synthesis of a 4-GHz sine wave with -74 dBm output power and 70 dBc SFDR.
We present the design and characterization of a broadband RF Josephson arbitrary waveform synthesizer (RF-JAWS) with a series array of 4500 Josephson junctions (JJs) and integrated low-pass/high-pass five-pole superconducting diplexers. The integrated diplexers enable broadband filtering of the feedthrough signal components in the drive-current pulses with decade-wide instantaneous bandwidth. The diplexers have at least 30 GHz passband with less than 0.8 dB insertion loss. The JJ array is driven with a delta-sigma pulse sequence that encodes 10 kHz and 1.005 GHz tones, and generates an open-circuit voltage of 22 mV rms (−26.18 dBm available power assuming a 50Ω\mathrm{\Omega }ΩThevenin equivalent source) at 1.005 GHz—a 25% increase compared to the state of the art. The drive current pulses undergo a three-step equalization to compensate for the linear distortion of the room-temperature electronics, the on-chip diplexers, and the remaining on- and off-chip components. The measured parasitic feedthrough voltages at 1.005 GHz are around −33 dBc, and their effect on the quantum locking ranges (QLRs) is quantified by measurements. The results demonstrated in this article show a significant step toward a broadband, integrated, quantum-based microwave voltage source with useful power above −30 dBm.
A quantum-accurate waveform with an rms output amplitude of 1 V has been synthesized for the first time. This fourfold increase in voltage over previous systems was achieved through developments and improvements in bias electronics, pulse-bias techniques, Josephson junction array circuit fabrication, and packaging. A recently described ac-coupled bipolar pulse-bias technique was used to bias a superconducting integrated circuit with 25 600 junctions, which are equally divided into four series-connected arrays, into the second quantum state. We describe these advancements and present the measured 1 V spectra for 2 Hz and 10 Hz sine waves that remained quantized over a 0.4 mA current range. We also demonstrate a 2 kHz sine wave produced with another bias technique that requires no compensation current and remains quantized at an rms voltage of 128 mV over a 1 mA current range. Increasing the clock frequency to 19 GHz also allowed us to achieve a maximum rms output voltage for a single array of 330 mV.
We have developed a Josephson digital-to-analog converter, otherwise know as a Josephson arbitrary waveform synthesizer, with 300 mV peak output voltage. This is the first system of its kind with demonstrated quantum accuracy. We show precision synthesized waveforms from dc to 100 kHz with measured distortion and harmonic content below 115 dBc (dB below the carrier or fundamental). The heart of the system is a superconducting microwave integrated circuit with two Josephson junction arrays biased in parallel for the microwave drive and connected in series to double the voltage for the audio frequency output waveforms. New superconducting integrated circuits with twice as many stacked junctions and improved microwave circuits have allowed us to more than double the output voltage of our recent system. We also demonstrate that quantum-based synthesized arbitrary waveforms (not just sine waves) can be used for precision measurements of a high-performance commercial analog-to-digital converter.