Digital communication has become part of most applications we use today.It could be for internet access using WLAN/WiMAX technology or satellite based Digital Video Broadcasting (DVB) or even mobile applications.It may be possible to achieve very high communication bandwidth for these applications.But the problem is with the reliability of information received over the communication channel that is often subjected to noise.The obvious solution to this problem is incorporating error correction techniques in the communication system to correct the errors introduced during transit.One of the best performing error correction codes are Low-Density Parity-Check (LDPC) codes discovered by Gallager in 1962, but these codes only gained popularity over the last decade or so.LDPC codes can achieve excellent bit error rate (BER) performance and are very suitable for next-generation communication systems.Studies have shown that large LDPC codes can achieve BER performance very close to the Shannon Limit.Hence these codes are of paramount interest among the research community.However, practical implementation of high performance LDPC decoders with large code lengths is a challenge faced by designers today due to the huge complexity and hardware resources required.This research aims to reduce the complexity of LDPC decoding algorithms and explore resource efficient architectures for hardware implementation.LDPC decoders are primarily based on iterative algorithms and typically consist of large number of computational nodes, with complex interconnections among the nodes.A fully-parallel implementation of LDPC decoder with large code length can provide high throughput, but is costly in terms of hardware resources required.Even today's high-end FPGAs
Digital communication has become part of most applications we use today.It could be for internet access using WLAN/WiMAX technology or satellite based Digital Video Broadcasting (DVB) or even mobile applications.It may be possible to achieve very high communication bandwidth for these applications.But the problem is with the reliability of information received over the communication channel that is often subjected to noise.The obvious solution to this problem is incorporating error correction techniques in the communication system to correct the errors introduced during transit.One of the best performing error correction codes are Low-Density Parity-Check (LDPC) codes discovered by Gallager in 1962, but these codes only gained popularity over the last decade or so.LDPC codes can achieve excellent bit error rate (BER) performance and are very suitable for next-generation communication systems.Studies have shown that large LDPC codes can achieve BER performance very close to the Shannon Limit.Hence these codes are of paramount interest among the research community.However, practical implementation of high performance LDPC decoders with large code lengths is a challenge faced by designers today due to the huge complexity and hardware resources required.This research aims to reduce the complexity of LDPC decoding algorithms and explore resource efficient architectures for hardware implementation.LDPC decoders are primarily based on iterative algorithms and typically consist of large number of computational nodes, with complex interconnections among the nodes.A fully-parallel implementation of LDPC decoder with large code length can provide high throughput, but is costly in terms of hardware resources required.Even today's high-end FPGAs
Low-Density Parity-Check (LDPC) codes have recaptured the attention of the scientific community a few years after Turbo codes were invented in the early nineties. Originally proposed in the 1960s at MIT by R. Gallager, LDPC codes represent powerful error correcting codes that allow working very close to the Shannon limit and achieve excellent Bit Error Rate (BER) due to computationally intensive algorithms on the decoder side of the system. Advances in microelectronics introduced small process technologies that allowed developing complex designs incorporating a high number of transistors in Very Large Scale Integration (VLSI) systems. Recently, these processes have been used to develop architectures able of performing LDPC decoding in real-time and delivering considerably high throughputs. Mainly for these reasons and naturally because the patent has expired, they have been adopted by modern communication standards which triggered their popularity, showing how actual they are. Due to the increase of transistor density in VLSI systems, and also to the fact that recently processing speed has risen faster than bandwidth, power and memory walls have created a new paradigm in computer architectures: rather than just increasing the frequency of operation supported by smaller process designs, the introduction of multiple cores on a single chip has become the new trend to provide augmented computational power. This thesis proposes new approaches for these computationally intensive algorithms, by performing parallel LDPC decoding based on ubiquitous multi-core architectures and achieves efficient throughputs that compare well with dedicated VLSI systems. We extensively address the challenges faced in the investigation and development of these programmable solutions, with focus mainly given on flexibility and scalability of the proposed algorithms, throughput and BER performance, and general efficiency of the programmable solutions here presented, that also achieve results more than an order of magnitude superior to those obtained with conventional CPUs. Furthermore, the investigation herein described follows a methodology that analyzes in detail the computational complexity of these decoding algorithms in order to propose strategies to accelerate their processingwhich, if conveniently transposed to other areas of computer science, can demonstrate that in this new multi-core era we may be in the presence of valid alternatives to non-reprogrammable dedicated VLSI hardware that requires non-recurring engineering.
After the introduction of iterative coding, Low Density Parity Check (LDPC) codes have received a lot of attention due to their remarkable near Shannon-limit performance and practical decoder implementation. However, when employing an LDPC code for various applications, multiple issues do arise at the simulation, algorithm and implementation levels. The first issue is the performance evaluation of the iterative LDPC decoder in the very low Bit Error Rate (BER) regions. So far, no analytical tool has been developed to evaluate the performance of LDPC codes. Unfortunately standard Monte Carlo (MC) simulations cannot be used for performance estimation in these low BER regions due to prohibitive execution times. The second issue is the efficiency of the decoding algorithm. Due to the presence of short cycles in the bipartite graph, sum-product decoding algorithms lead to considerable performance loss for short block-length LDPC codes and produce error floors for longer codes. In addition, the iterative processing and estimation of soft probabilistic values with these algorithms result in very high computational complexity, which in turn impedes the adoption of LDPC codes for power constrained systems. Another prime objective is to design a high throughput decoder architecture which is capable of supporting multiple rates and variable code lengths within minimal area.
This work aims to address and provide solutions to the above problems. As a solution to the performance estimation problem of LDPC codes, a highly efficient and novel fast BER simulation technique is developed. At the algorithm level, a performance improvement and error floor avoidance method is introduced, and a computationally efficient algorithm is developed for the sum-product decoding of LDPC codes. And finally, at the architecture level, a high throughput multi-rate variable code length implementation is presented which, when implemented, efficiently minimizes device resources while alleviating the routing complexity of the decoder.
Low-density parity-check codes (LDPC) are among the most powerful error correcting tools today available. For this reason they became very popular in several applications such as the digital satellite broadcasting system (DVB-S2), wireless local area network (IEEE 802.11n) and metropolitan area network (802.16e). Whereas several code-specific decoders have been proposed in the literature, the implementation of a high performance yet flexible LDPC decoder still is a challenging topic. This work presents a novel formulation of the decoding algorithm that strongly simplifies internal communication requirements and enables the development of decoders supporting generally defined LDPC codes. The resulting architecture is tailored to decode both IEEE 802.11n and IEEE 802.16e LDPC codes, as well as any other code of comparable complexity. The implementation cost deriving from the full flexibility offered by the proposed approach is also evaluated.
The Low-Density Parity-Check codes are among the most powerful forward error correcting codes, since they enable to get as close as a fraction of a dB from the Shannon limit.This astonishing performance combined with their relatively simple decoding algorithmmake these codes very attractive for the next digital transmission system generations. Itis already the case for the next digital satellite broadcasting standard (DVB-S2), where an irregular LDPC code has been chosen to protect the downlink information. In this thesis, we focused our research on the iterative decoding algorithms and their hardware implementations. We proposed first a suboptimal algorithm named the λ-min algorithm. It reduces significantly the complexity of the decoder without any significant performance loss, as compared to the belief propagation (BP) algorithm. Then we studied and designed a generic architecture of an LDPC decoder, which has been implemented on a FPGA based platform. This hardware decoder enables to accelerate the simulations more than 500 times as compared to software simulations. Moreover, based on an all-tunable design, our decoder features many facilities: It is possible to configure it for a very wide code family, so that the research for good codes is processed faster ; thanks to the genericity of the processing components, it is also possible to optimize the internal coding format, and even to compare various decoding algorithms and various processing schedules. Finally, our experience in the area of LDPC decoders led us to propose a formal framework for analysing the architectures of LDPC decoders. This framework encompassesboth the datapath (parallelism, node processors architectures) and the control mode associated to the several decoding schedules. Thus within this framework, a classification of the different state-of-the-art LDPC decoders is proposed. Moreover, some synthesis of efficient and unpublished architectures have been also proposed.
Low-density parity-check (LDPC) codes have been shown to have good error correcting performance approaching Shannon’s limit. Good error correcting performance enables efficient and reliable communication. However, a LDPC code decoding algorithm needs to be executed efficiently to meet cost, time, power and bandwidth requirements of target applications. The constructed codes should also meet error rate performance requirements of those applications. Since their rediscovery, there has been much research work on LDPC code construction and implementation. LDPC codes can be designed over a wide space with parameters such as girth, rate and length. There is no unique method of constructing LDPC codes. Existing construction methods are limited in some way in producing good error correcting performing and easily implementable codes for a given rate and length. There is a need to develop methods of constructing codes over a wide range of rates and lengths with good performance and ease of hardware implementability. LDPC code hardware design and implementation depend on the structure of target LDPC code and is also as varied as LDPC matrix designs and constructions. There are several factors to be considered including decoding algorithm computations,processing nodes interconnection network, number of processing nodes, amount of memory, number of quantization bits and decoding delay. All of these issues can be handled in several different ways. \nThis thesis is about construction of LDPC codes and their hardware implementation. LDPC code construction and implementation issues mentioned above are too many to be addressed in one thesis. The main contribution of this thesis is the development of LDPC code construction methods for some classes of structured LDPC codes and techniques for reducing decoding time. We introduce two main methods for constructing structured codes. In the first method, column-weight two LDPC codes are derived from distance graphs. A wide range of girths, rates and lengths are obtained compared to existing methods. The performance and implementation complexity of obtained codes depends on the structure of their corresponding distance graphs. In the second method, a search algorithm based on bit-filing and progressive-edge growth algorithms is introduced for constructing quasi-cyclic LDPC codes. The algorithm can be used to form a distance or Tanner graph of a code. This method could also obtain codes over a wide range of parameters. Cycles of length four are avoided by observing the row-column constraint. \nRow-column connections observing this condition are searched sequentially or randomly. Although the girth conditions are not sufficient beyond six, larger girths codes were easily obtained especially at low rates. The advantage of this algorithm compared to other methods is its flexibility. It could be used to construct codes for a given rate and length with girths of at least six for any sub-matrix configuration or rearrangement. The code size is also easily varied by increasing or decreasing sub-matrix size. Codes obtained using a sequential search criteria show poor performance at low girths (6 and 8) while random searches result in good performing codes. \nQuasi-cyclic codes could be implemented in a variety of decoder architectures. One of the many options is the choice of processing nodes interconnect. We show how quasi-cyclic codes processing could be scheduled through a multistage network. Although these net-works have more delay than other modes of communication, they offer more flexibility at a reasonable cost. Banyan and Benes networks are suggested as the most suitable networks. \nDecoding delay is also one of several issues considered in decoder design and implementation. In this thesis, we overlap check and variable node computations to reduce decoding time. Three techniques are discussed, two of which are introduced in this thesis. The techniques are code matrix permutation, matrix space restriction and sub-matrix row-column scheduling. Matrix permutation rearranges the parity-check matrix such that rows and columns that do not have connections in common are separated. This techniques can be applied to any matrix. Its effectiveness largely depends on the structure of the code. We show that its success also depends on the size of row and column weights. Matrix space restriction is another technique that can be applied to any code and has fixed reduction in time or amount of overlap. Its success depends on the amount of restriction and may be traded with performance loss. The third technique already suggested in literature relies on the internal cyclic structure of sub-matrices to achieve overlapping. The technique is limited to LDPC code matrices in which the number of sub-matrices is equal to row and column weights. We show that it can be applied to other codes with a lager number of sub-matrices than code weights. However, in this case maximum overlap is not guaranteed. We calculate the lower bound on the amount of overlapping. Overlapping could be applied to any sub-matrix configuration of quasi-cyclic codes by arbitrarily choosing \nthe starting rows for processing. Overlapping decoding time depends on inter-iteration waiting times. We show that there are upper bounds on waiting times which depend on the code weights. Waiting times could be further reduced by restricting shifts in identity sub-matrices or using smaller sub-matrices. This overlapping technique can reduce the decoding time by up to 50% compared to conventional message and computation scheduling. \nTechniques of matrix permutation and space restriction results in decoder architectures that are flexible in LDPC code design in terms of code weights and size. This is due to the fact that with these techniques, rows and columns are processed in sequential order to achieve overlapping. However, in the existing technique, all sub-matrices have to be processed in parallel to achieve overlapping. Parallel processing of all code sub-matrices requires the architecture to have the number of processing units at least equal to the number sub-matrices. Processing units and memory space should therefore be distributed among the sub-matrices according to the sub-matrices arrangement. This leads to high complexity or inflexibility in the decoder architecture. We propose a simple, programmable and high throughput decoder architecture based on matrix permutation and space restriction techniques.
Because of their excellent error-correcting performance, low-density parity-check (LDPC) codes have recently attracted a lot of attention. In this paper, we are interested in the practical LDPC code decoder hardware implementations. The direct fully parallel decoder implementation usually incurs too high hardware complexity for many real applications, thus partly parallel decoder design approaches that can achieve appropriate trade-offs between hardware complexity and decoding throughput are highly desirable. Applying a joint code and decoder design methodology, we develop a high-speed -regular LDPC code partly parallel decoder architecture based on which we implement a -bit, rate- -regular LDPC code decoder on Xilinx FPGA device. This partly parallel decoder supports a maximum symbol throughput of Mbps and achieves BER at 2 dB over AWGN channel while performing maximum decoding iterations.