Techniques for the decoding of low density parity check codes: efficient simulation, algorithm improvement and implementation

Babak Daneshrad, Enver Çavuş

Published Jan 1, 2007• 2 citations

Abstract

After the introduction of iterative coding, Low Density Parity Check (LDPC) codes have received a lot of attention due to their remarkable near Shannon-limit performance and practical decoder implementation. However, when employing an LDPC code for various applications, multiple issues do arise at the simulation, algorithm and implementation levels. The first issue is the performance evaluation of the iterative LDPC decoder in the very low Bit Error Rate (BER) regions. So far, no analytical tool has been developed to evaluate the performance of LDPC codes. Unfortunately standard Monte Carlo (MC) simulations cannot be used for performance estimation in these low BER regions due to prohibitive execution times. The second issue is the efficiency of the decoding algorithm. Due to the presence of short cycles in the bipartite graph, sum-product decoding algorithms lead to considerable performance loss for short block-length LDPC codes and produce error floors for longer codes. In addition, the iterative processing and estimation of soft probabilistic values with these algorithms result in very high computational complexity, which in turn impedes the adoption of LDPC codes for power constrained systems. Another prime objective is to design a high throughput decoder architecture which is capable of supporting multiple rates and variable code lengths within minimal area. This work aims to address and provide solutions to the above problems. As a solution to the performance estimation problem of LDPC codes, a highly efficient and novel fast BER simulation technique is developed. At the algorithm level, a performance improvement and error floor avoidance method is introduced, and a computationally efficient algorithm is developed for the sum-product decoding of LDPC codes. And finally, at the architecture level, a high throughput multi-rate variable code length implementation is presented which, when implemented, efficiently minimizes device resources while alleviating the routing complexity of the decoder.

Related papers

Techniques for improving ldpc codes performance

Esa Alghonaim

Low Density Parity Check (LDPC) codes are considered to be one of the best classes of error-correcting codes. This thesis deals with two major issues in LDPC codes: decoder design to enhance error correction performance and efficient decoder implementation. Five techniques have been introduced in this thesis. First, an efficient platform for LDPC code design and performance evaluation is developed. This platform implements parallel simulation algorithms to efficiently evaluate the performance of the proposed algorithms for LDPC decoders and code design. Second, an innovative technique is introduced to improve the performance of LDPC decoding in the error-floor region. Special structures in the code graph, called trapping sets, are considered to be the major source of decoding errors in the error-floor region. The proposed technique is based on eliminating the negative effect of trapping sets during LDPC decoding. As a third contribution, a novel approach to improve the decoder performance and/or throughput is introduced. This approach is based on utilizing LDPC decoder idle times by introducing two queues: one at the decoder input and the other at the decoder output. This architecture enables the decoder to run extra iterations beyond the conventional maximum allowable iterations. The fourth proposed technique reduces the bit error rate of LDPC decoders. This technique is based on tracking the number of failed parity check equations in the intermediate decoding iterations, rather than only relying on the final decoder output (after reaching the maximum number of iterations). The last proposed technique deals with the construction of interconnect efficient fully-parallel LDPC codes with high error correction performance. Fully-parallel implementation is very hard due to the complexity of processing elements interconnections. The proposed technique is based on constructing LDPC codes with less complex interconnections and with low impact on the error correction performance. This goal is achieved by putting a constraint on the maximum connection length between any two processing elements.

Jan 1, 20080 citations

Design and Implementation of Low Bit Error Rate of LDPC Decoder

Ashlesha P. Kshirsagar, Sandeep Kakde, Manish Devendra Chawhan +1 more

Many classes of high-performance Low-density parity check codes are based on parity check matrices composed of permutation sub matrices. The emulation-simulation framework further allows the algorithm and implementation to be iteratively redefined to improve the error floor performance of message passing decoder. Log-Like hood-Ratio (LLR) based Belief-Propagation (BP) algorithm is presented for Low Density Parity Check codes. Numerically accurate representation of check node update computation used in LLR-BP decoding is described. The implementation of Sum-Product algorithm (SPA) within Low Density Parity Check Code (LDPC) decoder is described in this paper and the correction term is used to improve the decoding performance of min-sum algorithm (MSA). Quantization and log-tanh function approximation in sum-product decoder strongly affect which absorbing set dominates in error floor region. For LDPC decoder, bit error rate (BER) decreases with increase in the signal to noise ratio.

International Conference on Communication Systems and Network TechnologiesApr 1, 20151 citation

A multistage scheduled decoder for short block length low-density parity-check codes

Nazanin Elhami-Khorasani

Recent advances in coding theory have uncovered the previously forgotten power of Low-Density Parity-Check (LDPC) codes. Their popularity can be related to their relatively simple iterative decoders and their potential to achieve high performance close to shannon limit. These make them an attractive candidate for error correcting application in communication systems. In this thesis, we focus our research on the iterative decoding algorithms for Low-Density Parity-Check codes and present an improved decoding algorithm. First, the graph structure of LDPC codes is studied and a graph-based search algorithm to find the shortest closed walk and shortest cycle for each node of the graph is proposed. Then, the Deterministic schedule is applied on nodes of the graph with the objective of preserving the optimality of the algorithms. Finally, Hybrid Switch-Type technique is applied on the improved algorithms to provide a desirable complexity/performance trade-off. Hybrid Technique and Deterministic schedule are combined for decoding regular and irregular LDPC codes. The performance and complexity of the decoder is studied for Sum-Product and Gallager A algorithms. The result is a flexible decoder for any available LDPC code and any combination of decoding algorithms based on the communication systems need. In this technique, we benefit the high performance of soft-decision algorithms and low complexity of hard-decision algorithms by changing the decoding rule after a few iterations. Hence, a desirable performance can be obtained with less average number of soft iterations. Moreover, all the nodes do not update messages in each iteration. As a result, the total number of computations is reduced considerably

Jan 1, 20070 citations

Design and implementation of decoders for error correction in high-speed communication systems.

Joan Marc Català Pérez

This thesis is focused on the design and implementation of binary low-density parity-check (LDPC) code decoders for high-speed modern communication systems. The basic of LDPC codes and the performance and bottlenecks, in terms of complexity and hardware efficiency, of the main soft-decision and hard-decision decoding algorithms (such as Min-Sum, Optimized 2-bit Min-Sum and Reliability-based iterative Majority-Logic) are analyzed. The complexity and performance of those algorithms are improved to allow efficient hardware architectures.\n\nA new decoding algorithm called One-Minimum Min-Sum is proposed. It reduces considerably the complexity of the check node update equations of the Min-Sum algorithm. The second minimum is estimated from the first minimum value by a means of a linear approximation that allows a dynamic adjustment. The Optimized 2-bit Min-Sum algorithm is modified to initialize it with the complete LLR values and to introduce the extrinsic information in the messages sent from the variable nodes. Its variable node equation is reformulated to reduce its complexity. Both algorithms were tested for the (2048,1723) RS-based LDPC code and (16129,15372) LDPC code using an FPGA-based hardware emulator. They exhibit BER performance very close to Min-Sum algorithm and do not introduce early error-floor. \n\nIn order to show the hardware advantages of the proposed algorithms, hardware decoders were implemented in a 90 nm CMOS process and FPGA devices based on two types of architectures: full-parallel and partial-parallel one with horizontal layered schedule. The results show that the decoders are more area-time efficient than other published decoders and that the low-complexity of the Modified Optimized 2-bit Min-Sum allows the implementation of 10 Gbps decoders in current FPGA devices. \n\nFinally, a new hard-decision decoding algorithm, the Historical-Extrinsic Reliability-Based Iterative Decoder, is presented. This algorithm introduces the new idea of considering hard-decision votes as soft-decision to compute the extrinsic information of previous iterations. It is suitable for high-rate codes and improves the BER performance of the previous RBI-MLGD algorithms, with similar complexity.

Jul 7, 20170 citations

Efficient algorithms for stochastic decoding of LDPC codes

Kuo-Lun Huang

The expanding demand for high-speed communications has resulted in development of high-throughput error-correcting techniques required by emerging communication standards. Low-Density Parity-Check (LDPC) codes are a class of linear block codes that achieve near-capacity performance and have been selected as part of many digital communication standards. Stochastic computation has been proposed as a hardware efficient approach for decoding LDPC codes. Using stochastic computation, all messages in the iterative decoding process are represented by Bernoulli sequences. Computations on these sequences are performed bit-by-bit using simple logic operations. Furthermore, serial messages used in stochastic decoders help alleviate routing congestion in hardware implementation of decoder. These factors make stochastic decoding a low complexity alternative to implement LDPC decoders. In this dissertation, we analyze the characteristics of stochastic decoding and propose reduced-latency designs for stochastic LDPC decoders to achieve improved performance on various channel models.

Jan 1, 20162 citations

Performance Evaluation of LDPC decoding Algorithm for GF (2)

D Patel Jigisha, Patel Ruchita Kumari

Low Density Parity Check (LDPC) codes are one of the block coding techniques that can approach the Shannon’s limit within a fraction of a decibel for high block lengths. In many digital communication systems, these codes have strong competitors of turbo codes for error control. LDPC codes performance depends on the excellent design of parity check matrix and many diverse research methods have been used by different study groups to evaluate the performance. Unlike many other classes of codes, LDPC codes are already equipped with a fast, probabilistic decoding algorithm. This makes LDPC codes not only attractive from a theoretical point of view, but also very suitable for practical applications. This paper throws hard decision and soft decision algorithm of LDPC. The hard decision algorithm contains Bit flipping algorithm and Soft decoding algorithm contains Sum product algorithm which is used to correct burst error. Sum Product algorithm is also called as belief propagation. Bit flipping and Sum Product algorithms are explained and can be implemented for the generated parity check matrix of (1016x508) for LDPC code with code rate 1/2.

Journal of Emerging Technologies and Innovative ResearchNov 1, 20140 citations

After the introduction of iterative coding, Low Density Parity Check (LDPC) codes have received a lot of attention due to their remarkable near Shannon-limit performance and practical decoder implementation. However, when employing an LDPC code for various applications, multiple issues do arise at the simulation, algorithm and implementation levels. The first issue is the performance evaluation of the iterative LDPC decoder in the very low Bit Error Rate (BER) regions. So far, no analytical tool has been developed to evaluate the performance of LDPC codes. Unfortunately standard Monte Carlo (MC) simulations cannot be used for performance estimation in these low BER regions due to prohibitive execution times. The second issue is the efficiency of the decoding algorithm. Due to the presence of short cycles in the bipartite graph, sum-product decoding algorithms lead to considerable performance loss for short block-length LDPC codes and produce error floors for longer codes. In addition, the iterative processing and estimation of soft probabilistic values with these algorithms result in very high computational complexity, which in turn impedes the adoption of LDPC codes for power constrained systems. Another prime objective is to design a high throughput decoder architecture which is capable of supporting multiple rates and variable code lengths within minimal area.
This work aims to address and provide solutions to the above problems. As a solution to the performance estimation problem of LDPC codes, a highly efficient and novel fast BER simulation technique is developed. At the algorithm level, a performance improvement and error floor avoidance method is introduced, and a computationally efficient algorithm is developed for the sum-product decoding of LDPC codes. And finally, at the architecture level, a high throughput multi-rate variable code length implementation is presented which, when implemented, efficiently minimizes device resources while alleviating the routing complexity of the decoder.