Quantum sensing using Rydberg atoms offers unprecedented opportunities for next-generation radar systems, transcending classical limitations in miniaturization and spectral agility. This work proposes a quantum-enhanced radar reception architecture that replaces conventional antenna-tomixer chains with a centimeter-scale vapor cell as a quantum radio frequency (RF) field sensor and mixer, enabling this paradigm for radar sensing. This approach is based on electromagnetically induced transparency, which uses Autler-Townes splitting to enable direct RF-to-optical downconversion within the atomic medium via an external co-frequency reference. To circumvent the range-resolution limitation imposed by the narrow instantaneous response of the atomic receiver, we adopt a stepped-frequency synthesis strategy involving the hybrid manipulation of Rydberg energy states. This strategy combines coarse laser frequency tuning with fine AC-Stark shift compensation. Additionally, we establish a nonlinear response model of the Rydberg atomic homodyne receiver and propose a customized nonlinear compensation method that extends the linear dynamic range by over 7 dB. We developed a compressive sensing-based algorithm (CS-Rydberg) to suppress noise and mitigate the undersampling problem. Experimentally, we demonstrate a compact prototype that achieves centimeter-level ranging precision (RMSE = 1.06 cm) within 1.6–1.9 m. By synthesizing a 1-GHz equivalent bandwidth via sparse stepped-frequency sampling over 2.6–3.6 GHz, we observe resolvable target separations down to 15 cm under controlled sparse scenarios. These results validate the feasibility of quantum sensing based on Rydberg atomic receivers and underscore the architecture’s scalability. By harnessing the atoms’ ultrabroad spectral response, the synthesized bandwidth can extend well beyond the current range. This enables sub-centimeter resolution in future radar systems while preserving quantum traceable calibration and a highly simplified front end.
Quantum sensing using Rydberg atoms offers unprecedented opportunities for next-generation radar systems, transcending classical limitations in miniaturization and spectral agility. This work proposes a quantum-enhanced radar reception architecture that replaces conventional antenna-tomixer chains with a centimeter-scale vapor cell as a quantum radio frequency (RF) field sensor and mixer, enabling this paradigm for radar sensing. This approach is based on electromagnetically induced transparency, which uses Autler-Townes splitting to enable direct RF-to-optical downconversion within the atomic medium via an external co-frequency reference. To circumvent the range-resolution limitation imposed by the narrow instantaneous response of the atomic receiver, we adopt a stepped-frequency synthesis strategy involving the hybrid manipulation of Rydberg energy states. This strategy combines coarse laser frequency tuning with fine AC-Stark shift compensation. Additionally, we establish a nonlinear response model of the Rydberg atomic homodyne receiver and propose a customized nonlinear compensation method that extends the linear dynamic range by over 7 dB. We developed a compressive sensing-based algorithm (CS-Rydberg) to suppress noise and mitigate the undersampling problem. Experimentally, we demonstrate a compact prototype that achieves centimeter-level ranging precision (RMSE = 1.06 cm) within 1.6–1.9 m. By synthesizing a 1-GHz equivalent bandwidth via sparse stepped-frequency sampling over 2.6–3.6 GHz, we observe resolvable target separations down to 15 cm under controlled sparse scenarios. These results validate the feasibility of quantum sensing based on Rydberg atomic receivers and underscore the architecture’s scalability. By harnessing the atoms’ ultrabroad spectral response, the synthesized bandwidth can extend well beyond the current range. This enables sub-centimeter resolution in future radar systems while preserving quantum traceable calibration and a highly simplified front end.
Quantum sensing using Rydberg atoms offers unprecedented opportunities for next-generation radar systems, transcending classical limitations in miniaturization and spectral agility. Implementing this paradigm for radar sensing, this work proposes a quantum-enhanced radar reception architecture enabled by the emerging Rydberg atomic receiver, replacing conventional antenna-to-mixer chains with a centimeter-scale vapor cell. The proposed approach is based on electromagnetically induced transparency with the Autler-Townes splitting enabling direct RF-to-optical downconversion within the atomic medium via an external co-frequency reference. To circumvent the intrinsic bottleneck on instantaneous bandwidth of atomic receiver, we invoke a non-uniform stepped-frequency synthesis strategy combining coarse laser frequency tuning with fine AC-Stark shift compensation. Additionally, we establish a nonlinear response model of the Rydberg atomic homodyne receiver and propose a customized nonlinear compensation method that extends the linear dynamic range by over 7 dB. We develop a compressive sensing algorithm (CS-Rydberg) to suppress noise and mitigate the undersampling problem. Experimentally, we demonstrate a compact prototype achieving centimeter-level ranging precision (RMSE = 1.06 cm) within 1.6-1.9 m. By synthesizing GHz-bandwidth (2.6-3.6 GHz), resolvable target separations down to 15 cm are observed under controlled sparse scenarios. These results not only validate the feasibility of quantum sensing based on Rydberg atomic receivers but also underscore the architecture's inherent scalability: by harnessing the atoms' ultra-broad spectral response, the synthesized bandwidth can be extended well beyond the current range, enabling sub-centimeter resolution in future radar systems while preserving quantum-traceable calibration and a highly simplified front end.
Rydberg-atom-based electrometry provides a quantum, SI-traceable approach to radio-frequency (RF) and microwave electric-field sensing by linking optical spectra to absolute field strength through electromagnetically induced trans parency. Over the past decade, rapid advances in excitation schemes, field-tuning methods, interferometric readout, and cavity-assisted coupling have significantly improved sensitivity, bandwidth, and tunability of Rydberg-based sensors. In parallel, progress in fiber-coupled modules, microfabricated vapor cells, and photonic integration is enabling compact and deployable receiver architectures. This review presents a comprehensive and metrology-oriented synthesis of the physical principles, system architectures, standardized performance metrics, and uncertainty considerations relevant to Rydberg-atom RF sensing. By con solidating diverse developments into a unified performance and evaluation framework, this work provides a critical reference for the design, comparison, and advancement of next-generation quantum RF sensors and standards.
As a key enabler for next-generation wireless systems, integrated sensing and communication (ISAC) requires significantly higher receiver sensitivity than conventional architectures to achieve long-range target detection, thereby introducing new challenges in receiver design. Among potential solutions, Rydberg atomic quantum receivers (RAQRs) have attracted growing attention for their unique quantum sensing capabilities. By exploiting the exceptional responsiveness of Rydberg atoms to electromagnetic fields, RAQRs enable direct and highly sensitive measurement of radio-frequency (RF) signals without relying on traditional antenna-based front ends. However, this enhanced sensitivity also renders them more vulnerable to interference, particularly from undesired targets and long-delay multipath components. To address this limitation, this article presents practical strategies for improving the interference robustness and selective reception performance of RAQRs in ISAC scenarios. Specifically, we begin with a comprehensive overview of RAQR principles and identify the interference-related challenges encountered in ISAC applications. Building on this foundation, we introduce the Actively Selective RAQR (AS-RAQR) architecture, which integrates tunable gating mechanisms to actively suppress unwanted signals. The proposed design is validated through representative case studies, followed by a discussion of open challenges and future research directions.
Rydberg atomic receivers (RARs) leverage the quantum coherence of highly excited atoms to overcome the intrinsic physical limitations of conventional radio frequency receivers (RFRs), particularly in sensitivity, and bandwidth. This innovative technology represents a paradigm shift in wireless communication systems. This paper systematically explains the fundamental sensing mechanisms of RARs, contrasts their differences from RFRs in working principles and architectures. We explore their advantages in emerging wireless communication scenarios, such as integrated sensing and communications, quantum Rydberg radar, and quantum space communications. Practical challenges, such as limited instantaneous bandwidth and nonlinear distortion, are identified. To address these issues, mitigation strategies and future research directions are also outlined, supporting the advancement of RAR-aided wireless systems.
Rydberg atoms are neutral atoms excited to high principal quantum number states, which endows them with exaggerated properties such as large electric dipole moments, long lifetimes, and extreme sensitivity to external electromagnetic fields. These characteristics form the foundation of Rydberg atom-based sensors, an emerging class of quantum devices capable of optically detecting electric fields across frequencies from DC to the terahertz regime. Rydberg-based electrometry operates through both Autler–Townes (AT) splitting of resonant Rydberg transitions and Stark-shift measurements for high-frequency or far-detuned fields, enabling broadband field sensing from DC to the THz regime. Using ladder-type electromagnetically induced transparency (EIT) and AT splitting, these sensors enable non-invasive, SI-traceable measurements of field amplitude, frequency, phase, and polarization. Recent developments have demonstrated broadband electric field probes, voltage calibration standards, and compact RF receivers based on thermal vapor cells and integrated photonic architectures. Furthermore, innovations in multi-photon EIT, superheterodyne readout, and multi wave mixing have expanded the dynamic range and bandwidth of Rydberg-based electrometry. Despite challenges related to environmental perturbations, linewidth broadening, and laser stabilization, ongoing advances in atomic control, hybrid photonic integration, and EIT-based readout promise scalable, chip-compatible sensors. This review summarizes the physical principles, experimental progress, and emerging applications of Rydberg atom-based sensing, emphasizing their potential for next generation quantum metrology, wireless communication, and precision field mapping.
Next-generation space-air-ground-sea integrated networks (SAGSIN) impose unprecedented demands on advanced radio frequency (RF) receivers for full-spectrum agility, ultra-high sensitivity, and anti-jamming resilience, pushing conventional electronic receivers to their physical limits. To address these challenges, the Rydberg atomic quantum (RAQ) radio has emerged as a promising quantum-enabled receiver paradigm that directly maps electromagnetic fields onto atomic quantum states, offering an alternative to alleviate bottlenecks of conventional RF front ends. To provide a clear research roadmap, this survey presents a comprehensive review of RAQ radios by bridging atomic physics and wireless communications. Specifically, we first introduce the underlying quantum mechanisms, representative architectures, and atomic response models of RAQ radio. On this basis, state-of-the-art techniques for enhancing sensitivity, instantaneous bandwidth, and operating frequency are systematically reviewed, with particular emphasis on the inherent trade-offs among these key metrics. To connect quantum response with communication theory, we further analyze equivalent channel modeling frameworks for characterizing systematic performance limits. From the wireless communication perspective, some RAQ-enabled advanced technologies including cognitive, interference-resilient, low-frequency and multiple-input multiple-output (MIMO) communications are reviewed, alongside emerging deployment scenarios such as satellite networks, integrated sensing and communications, and reconfigurable intelligent surface-assisted systems. Finally, we identify open challenges and provide potential future directions of RAQ radio to inspire the further exploration.