Photonics

Rydberg Atom-Based Sensors: Principles, Recent Advances, and Applications

Dinelka Somaweera, Amer Abdulghani, Ambali Alade Odebowale, Andergachew Mekonnen Berhe, Muthugalage I. U. Weerasinghe, Khalil As’ham, Ibrahim A. M. Al Ani, Morphy C. Dumlao, Andrey E. Miroshnichenko, Haroldo Takashi Hattori

Published Dec 12, 2025• 12 citations

Publisher

Abstract

Rydberg atoms are neutral atoms excited to high principal quantum number states, which endows them with exaggerated properties such as large electric dipole moments, long lifetimes, and extreme sensitivity to external electromagnetic fields. These characteristics form the foundation of Rydberg atom-based sensors, an emerging class of quantum devices capable of optically detecting electric fields across frequencies from DC to the terahertz regime. Rydberg-based electrometry operates through both Autler–Townes (AT) splitting of resonant Rydberg transitions and Stark-shift measurements for high-frequency or far-detuned fields, enabling broadband field sensing from DC to the THz regime. Using ladder-type electromagnetically induced transparency (EIT) and AT splitting, these sensors enable non-invasive, SI-traceable measurements of field amplitude, frequency, phase, and polarization. Recent developments have demonstrated broadband electric field probes, voltage calibration standards, and compact RF receivers based on thermal vapor cells and integrated photonic architectures. Furthermore, innovations in multi-photon EIT, superheterodyne readout, and multi wave mixing have expanded the dynamic range and bandwidth of Rydberg-based electrometry. Despite challenges related to environmental perturbations, linewidth broadening, and laser stabilization, ongoing advances in atomic control, hybrid photonic integration, and EIT-based readout promise scalable, chip-compatible sensors. This review summarizes the physical principles, experimental progress, and emerging applications of Rydberg atom-based sensing, emphasizing their potential for next generation quantum metrology, wireless communication, and precision field mapping.

DOI: 10.3390/photonics12121228

Related papers

Rydberg Atom RF Sensing: State of the Art, Principles, Metrics, and Roadmaps

Anu Babusenan, Fr´ed´eric Munoz, Jean-Baptiste Qu´elene +1 more

Rydberg-atom-based electrometry provides a quantum, SI-traceable approach to radio-frequency (RF) and microwave electric-field sensing by linking optical spectra to absolute field strength through electromagnetically induced trans parency. Over the past decade, rapid advances in excitation schemes, field-tuning methods, interferometric readout, and cavity-assisted coupling have significantly improved sensitivity, bandwidth, and tunability of Rydberg-based sensors. In parallel, progress in fiber-coupled modules, microfabricated vapor cells, and photonic integration is enabling compact and deployable receiver architectures. This review presents a comprehensive and metrology-oriented synthesis of the physical principles, system architectures, standardized performance metrics, and uncertainty considerations relevant to Rydberg-atom RF sensing. By con solidating diverse developments into a unified performance and evaluation framework, this work provides a critical reference for the design, comparison, and advancement of next-generation quantum RF sensors and standards.

IEEE Sensors ReviewsJan 1, 20261 citation

Broadband Rydberg atom-based radio-frequency field sensor

Jiao Yue-Chun, Jianming Zhao, Jia Suo-Tang

Significant progress has been made in atom-based measurements of length, time, gravity and electromagnetic fields in recently years. Rydberg atom-based microwave electric field measurement, using electromagnetically induced transparency (EIT) in room temperature alkali-metal vapors, has been extensively investigated and aroused the broad interest. This approach may establish a new standard for the measurements of microwave (MW) and radio frequency (RF) electric fields.In this review, we describe the work on a new method of measuring electric fields based on quantum interference by using either cesium or rubidium atoms contained in a dielectric vapor cell. Rydberg atoms with principal quantum number n >>1 have large direct current (DC) polarizabilities and microwave transition dipole moments, thereby making them extremely sensitive to external electric fields. Using the Rydberg three-level EIT to detect the level splitting and shift that is induced by the external field, we can realize a rapid and robust self-calibration method of measuring the electric field in a frequency range from 0.01 GHz to 1000 GHz. For the MW electric field (frequency range > 1 GHz), the MW field causes the Rydberg states to split, known as an Autler-Townes splitting (A-T) effect when the applied microwave can resonate with adjacent Rydberg states. The MW coupled A-T splitting is proportional to the applied electric field strength, from which the field strength is measured. Using the EIT window, a high sensitivity of 3 μV·cm-1·Hz-1/2 and small electric field of 1 μV/cm are expected to be achieved with a modest setup, and the limitations of the sensitivity are also addressed in the review. For the RF field at frequency mj EIT lines, and avoided crossings formed with the fine-structure levels of equal mj and different J's, which is used to calibrate and measure the RF field amplitude. On the other hand, the dependence of the EIT-line strength on the RF field polarization provides a fast and robust polarization measurement of RF fields based on matching experimental data with a theoretical simulation. The measurements of minimum strengths and sensitivity of RF fields based on Rydberg atoms are one order magnitude below the values obtained by traditional antenna methods. The atom-based field measurement paves the way for determining fields through calibration-free, invariable atomic properties and miniaturization. We also propose its various potential applications in the future.

Acta Physica SinicaJan 1, 20187 citations

Measurement of low-frequency electric field waveform by Rydberg atom-based sensor

Xuechao Zhang, Jia-Hui Qiao, Yao Liu +6 more

The high polarizability of Rydberg atoms enables the multi-parameters measurement of electromagnetic fields. In this paper, we report on an atomic antenna based on Rydberg atoms in a room temperature vapor cell. The EIT is a destructive interference spectroscopy with a narrow linewidth and can be used to detect small electric fields through Autler-Townes splitting or Stark shifts. In our experiments, we employ cascade-type two-photon excitation electromagnetically induced transparency (EIT) spectroscopy to measure the shift of the Rydberg energy level. We introduce a low-frequency electric field (~kHz frequency) using a built-in electrode technique in the cesium cell. The interaction between the Rydberg atom and electric field induces the Stark shifts, where the amplitude of the electric field is converted into corresponding two-photon detuning by the EIT effect. Furthermore, the amplitude of the low-frequency electric field is converted into an intensity signal of EIT probe beam. Under weak field conditions, it is an approximate linear relationship between EIT transmission signal and input electric field amplitude, enabling measurement of waveform, amplitude, and frequency. We have demonstrated optical measurements of low-frequency electric field using Rydberg atoms. By increasing the power of probe beam and coupling beam, the EIT can increase the response bandwidth from ~MHz to hundreds of MHz. This provides a scalable approach for measuring high-frequency electric fields.

Acta Physica SinicaJan 1, 20244 citations

Rydberg Atomic Quantum Receivers for Classical Wireless Communication and Sensing

Tierui Gong, Aveek Chandra, Chau Yuen +5 more

Rydberg atomic quantum receivers (RAQRs) are emerging quantum precision sensing platforms designed for receiving radio frequency (RF) signals. It relies on the creation of Rydberg atoms from normal atoms by exciting one or more electrons to a very high energy level, thereby making the atom sensitive to RF signals. RAQRs realize RF-to-optical conversions based on atom-light interactions relying on the so-called electromagnetically induced transparency (EIT) and Autler- Townes splitting (ATS) so that the desired RF signal can be read out optically. The large dipole moments of Rydberg atoms associated with rich choices of Rydberg states facilitate an ultra-high sensitivity (~nv⁄cm/√Hz) and an ultra-broadband tunability (direct-current to Terahertz). RAQRs also exhibit compelling scalability and lend themselves to the construction of innovative, compact receivers. Initial experimental studies have demonstrated their capabilities in classical wireless communications and sensing. To fully harness their potential in a wide variety of applications, we commence by outlining the underlying fundamentals of Rydberg atoms, followed by the principles and schemes of RAQRs. Then, we overview the state-of-the-art studies from both physics and communication societies. Furthermore, we conceive Rydberg atomic quantum single-input single-output (RAQ-SISO) and multiple-input multiple- output (RAQ-MIMO) schemes to facilitate the integration of RAQRs with classical wireless systems. Finally, we conclude with a set of potent research directions.

arXiv:2409.14501IEEE Wireless CommunicationsApr 21, 202542 citations

Microwave electric field sensing with Rydberg atoms

Daniel T. Stack, Paul D. Kunz, David H. Meyer +1 more

Atoms form the basis of precise measurement for many quantities (time, acceleration, rotation, magnetic field, etc.). Measurements of microwave frequency electric fields by traditional methods (i.e. engineered antennas) have limited sensitivity and can be difficult to calibrate properly. Highly-excited (Rydberg) neutral atoms have very large electric-dipole moments and many dipole allowed transitions in the range of 1 - 500 GHz. It is possible to sensitively probe the electric field in this range using the combination of two quantum interference phenomena: electromagnetically induced transparency and the Autler-Townes effect. This technique allows for very sensitive field amplitude, polarization, and sub-wavelength imaging measurements. These quantities can be extracted by measuring properties of a probe laser beam as it passes through a warm rubidium vapor cell. Thus far, Rydberg microwave electrometry has relied upon the absorption of the probe laser. We report on our use of polarization rotation, which corresponds to the real part of the susceptibility, for measuring the properties of microwave frequency electric fields. Our simulations show that when a magnetic field is present and directed along the optical propagation direction a polarization rotation signal exists and can be used for microwave electrometry. One central advantage in using the polarization rotation signal rather than the absorption signal is that common mode laser noise is naturally eliminated leading to a potentially dramatic increase in signal-to-noise ratio.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIEMay 19, 20163 citations

Rydberg-atom-based radio-frequency sensors: amplitude-regime sensing

Matthias Schmidt, Stephanie M. Bohaichuk, Vijin Venu +5 more

Rydberg atom-based radio frequency electromagnetic field sensors are drawing wide-spread interest because of their unique properties, such as small size, dielectric construction, and self-calibration. These photonic sensors use lasers to prepare atoms and read out the atomic response to a radio frequency electromagnetic field based on electromagnetically induced transparency, or related phenomena. Much of the theoretical work has focused on the Autler-Townes splitting induced by the radio frequency wave. The amplitude regime, where the change in transmission observed on resonance is measured to determine electric field strength, has received less attention. In this paper, we deliver analytic expressions that are useful for calculating the absorption coefficient in the amplitude regime. Our main goal is to describe the analytic expressions for the absorption coefficient and demonstrate their validity over a large range of the interesting parameter space. The effect of the thermal motion of the atoms is explicitly addressed. The analytic formulas for the absorption coefficient for different types of Doppler broadening are compared to estimate the sensitivity under conditions where it is limited by the laser shot noise. Residual Doppler shifts are shown to limit sensitivity. The expressions, approximations and descriptions presented in the paper are important for understanding the absorption of Rydberg atom-based sensors in the amplitude regime. This provides insight into the physics of multi-level interference phenomena.

arXiv:2307.00121Optics ExpressJun 13, 202422 citations