Rydberg atomic receivers (RARs) leverage the quantum coherence of highly excited atoms to overcome the intrinsic physical limitations of conventional radio frequency receivers (RFRs), particularly in sensitivity, and bandwidth. This innovative technology represents a paradigm shift in wireless communication systems. This paper systematically explains the fundamental sensing mechanisms of RARs, contrasts their differences from RFRs in working principles and architectures. We explore their advantages in emerging wireless communication scenarios, such as integrated sensing and communications, quantum Rydberg radar, and quantum space communications. Practical challenges, such as limited instantaneous bandwidth and nonlinear distortion, are identified. To address these issues, mitigation strategies and future research directions are also outlined, supporting the advancement of RAR-aided wireless systems.
Rydberg atomic receivers (RARs) leverage the quantum coherence of highly excited atoms to overcome the intrinsic physical limitations of conventional radio frequency receivers (RFRs), particularly in sensitivity, and bandwidth. This innovative technology represents a paradigm shift in wireless communication systems. This paper systematically explains the fundamental sensing mechanisms of RARs, contrasts their differences from RFRs in working principles and architectures. We explore their advantages in emerging wireless communication scenarios, such as integrated sensing and communications, quantum Rydberg radar, and quantum space communications. Practical challenges, such as limited instantaneous bandwidth and nonlinear distortion, are identified. To address these issues, mitigation strategies and future research directions are also outlined, supporting the advancement of RAR-aided wireless systems.
Next-generation space-air-ground-sea integrated networks (SAGSIN) impose unprecedented demands on advanced radio frequency (RF) receivers for full-spectrum agility, ultra-high sensitivity, and anti-jamming resilience, pushing conventional electronic receivers to their physical limits. To address these challenges, the Rydberg atomic quantum (RAQ) radio has emerged as a promising quantum-enabled receiver paradigm that directly maps electromagnetic fields onto atomic quantum states, offering an alternative to alleviate bottlenecks of conventional RF front ends. To provide a clear research roadmap, this survey presents a comprehensive review of RAQ radios by bridging atomic physics and wireless communications. Specifically, we first introduce the underlying quantum mechanisms, representative architectures, and atomic response models of RAQ radio. On this basis, state-of-the-art techniques for enhancing sensitivity, instantaneous bandwidth, and operating frequency are systematically reviewed, with particular emphasis on the inherent trade-offs among these key metrics. To connect quantum response with communication theory, we further analyze equivalent channel modeling frameworks for characterizing systematic performance limits. From the wireless communication perspective, some RAQ-enabled advanced technologies including cognitive, interference-resilient, low-frequency and multiple-input multiple-output (MIMO) communications are reviewed, alongside emerging deployment scenarios such as satellite networks, integrated sensing and communications, and reconfigurable intelligent surface-assisted systems. Finally, we identify open challenges and provide potential future directions of RAQ radio to inspire the further exploration.
As a key enabler for next-generation wireless systems, integrated sensing and communication (ISAC) requires significantly higher receiver sensitivity than conventional architectures to achieve long-range target detection, thereby introducing new challenges in receiver design. Among potential solutions, Rydberg atomic quantum receivers (RAQRs) have attracted growing attention for their unique quantum sensing capabilities. By exploiting the exceptional responsiveness of Rydberg atoms to electromagnetic fields, RAQRs enable direct and highly sensitive measurement of radio-frequency (RF) signals without relying on traditional antenna-based front ends. However, this enhanced sensitivity also renders them more vulnerable to interference, particularly from undesired targets and long-delay multipath components. To address this limitation, this article presents practical strategies for improving the interference robustness and selective reception performance of RAQRs in ISAC scenarios. Specifically, we begin with a comprehensive overview of RAQR principles and identify the interference-related challenges encountered in ISAC applications. Building on this foundation, we introduce the Actively Selective RAQR (AS-RAQR) architecture, which integrates tunable gating mechanisms to actively suppress unwanted signals. The proposed design is validated through representative case studies, followed by a discussion of open challenges and future research directions.
Rydberg atomic quantum receivers (RAQRs) are emerging quantum precision sensing platforms designed for receiving radio frequency (RF) signals. It relies on the creation of Rydberg atoms from normal atoms by exciting one or more electrons to a very high energy level, thereby making the atom sensitive to RF signals. RAQRs realize RF-to-optical conversions based on atom-light interactions relying on the so-called electromagnetically induced transparency (EIT) and Autler- Townes splitting (ATS) so that the desired RF signal can be read out optically. The large dipole moments of Rydberg atoms associated with rich choices of Rydberg states facilitate an ultra-high sensitivity (~nv⁄cm/√Hz) and an ultra-broadband tunability (direct-current to Terahertz). RAQRs also exhibit compelling scalability and lend themselves to the construction of innovative, compact receivers. Initial experimental studies have demonstrated their capabilities in classical wireless communications and sensing. To fully harness their potential in a wide variety of applications, we commence by outlining the underlying fundamentals of Rydberg atoms, followed by the principles and schemes of RAQRs. Then, we overview the state-of-the-art studies from both physics and communication societies. Furthermore, we conceive Rydberg atomic quantum single-input single-output (RAQ-SISO) and multiple-input multiple- output (RAQ-MIMO) schemes to facilitate the integration of RAQRs with classical wireless systems. Finally, we conclude with a set of potent research directions.
With the escalating development of the quantum information technologies, the Rydberg atomic receiver has been envisioned as a promising alternative to its classical electronic counterparts, attracting extensive attentions from both physics and electronic engineering disciplines. By exploiting the electrical acuteness of Alkali atoms with diverse Rydberg energy states for electromagnetic field measurement, Rydberg atomic receiver is capable of surmounting the inherent limitations on the operating bandwidth and detection sensitivity of the classical electronic counterparts. Against this background, this article provides an extensive overview of Rydberg atomic communication and sensing from fundamental theory, critical technologies to practical implementations. Firstly, the milestones of the Rydberg atomic receiver evolution was introduced. Then we provide a clear understanding of Rydberg atomic receiver mechanisms from the perspective of classical communication and sensing, and highlight the unprecedented advantages over traditional electronic receivers as well as the technical challenges. Afterwards, necessary fundamentals are presented including the Rydberg atoms, typical non-coherent/coherent structures, and explicit experimental configurations, followed by discussions on state-of-the-art development of the Rydberg atomic receiver. Specifically, advancements on electric-field detection methods for accurate measurement of amplitude, phase, frequency and polarization, are extensively investigated. Based on the established methodologies, recent innovations in Rydberg atomic communication and sensing are reviewed, ranging from waveform design and array-based signal processing to radar applications like localization, imaging and remote sensing, with practical experimental results presented. Finally, we summarize the promising research trends around Rydberg atomic receiver.
Rydberg atoms are atoms in their highly excited energy states. The physical properties of Rydberg atoms in the presence of external fields play an important role in quantum precision measurement. In recent years, radio-frequency electric field sensing based on Rydberg atoms has attracted significant interest. It is widely recognized as an electromagnetic sensing system fundamentally different from traditional ones. As a quantum sensor, it is expected to surpass several foundational limitations of traditional receivers, such as sensitivity, dynamic range and frequency bandwidth. It was reported that Rydberg sensing systems can sense microwaves of frequencies from DC up to 1THz. Its quantum nature would possibly avoid internal thermal (Johnson) noise, even at room temperature. Recent demonstrations have also observed high precision for terahertz imaging, strong fields sensing, proof-of-principle communication. However, limitations of this novel system have not been addressed, especially for a practical radar, communication or electronic warfare system. Here in this work, we first compare the architectures of different microwave receivers and then analyze the metrics of Rydberg microwave receivers, such as instantaneous bandwidth and dynamic range based on experimental results. We concluded by pointing out several main obstacles to overcome for realizing a practical state-of-the-art microwave receiver.
Rydberg Atomic REceiver (RARE) is driving a paradigm shift in electromagnetic wave measurement by harnessing the electron transition phenomenon of Rydberg atoms. Operating at the quantum scale, such receivers have the potential to breakthrough the performance limit of classic receivers, sparking a revolution in physical-layer wireless communications. The objective of this article is to offer insights into RARE-empowered communication systems. We first provide a comprehensive introduction to the fundamental principles of RAREs. Then, a thorough comparison between RAREs and classic receivers is conducted in terms of the antenna size, sensitivity, and bandwidth. Subsequently, we overview the recent progresses in RARE-aided wireless communications, covering the frequency-division multiplexing, multiple- input-multiple-output, wireless sensing, and quantum many-body techniques. Moreover, the unique application of RARE in multi-band communication and sensing is unveiled, followed by numerical experiments to show its performance superiority over classic receivers by ~2.4 bps/ Hz in spectrum efficiency and ~7.2 dB in sensing accuracy. Finally, we conclude this article by providing promising research directions.