With the escalating development of the quantum information technologies, the Rydberg atomic receiver has been envisioned as a promising alternative to its classical electronic counterparts, attracting extensive attentions from both physics and electronic engineering disciplines. By exploiting the electrical acuteness of Alkali atoms with diverse Rydberg energy states for electromagnetic field measurement, Rydberg atomic receiver is capable of surmounting the inherent limitations on the operating bandwidth and detection sensitivity of the classical electronic counterparts. Against this background, this article provides an extensive overview of Rydberg atomic communication and sensing from fundamental theory, critical technologies to practical implementations. Firstly, the milestones of the Rydberg atomic receiver evolution was introduced. Then we provide a clear understanding of Rydberg atomic receiver mechanisms from the perspective of classical communication and sensing, and highlight the unprecedented advantages over traditional electronic receivers as well as the technical challenges. Afterwards, necessary fundamentals are presented including the Rydberg atoms, typical non-coherent/coherent structures, and explicit experimental configurations, followed by discussions on state-of-the-art development of the Rydberg atomic receiver. Specifically, advancements on electric-field detection methods for accurate measurement of amplitude, phase, frequency and polarization, are extensively investigated. Based on the established methodologies, recent innovations in Rydberg atomic communication and sensing are reviewed, ranging from waveform design and array-based signal processing to radar applications like localization, imaging and remote sensing, with practical experimental results presented. Finally, we summarize the promising research trends around Rydberg atomic receiver.
With the escalating development of the quantum information technologies, the Rydberg atomic receiver has been envisioned as a promising alternative to its classical electronic counterparts, attracting extensive attentions from both physics and electronic engineering disciplines. By exploiting the electrical acuteness of Alkali atoms with diverse Rydberg energy states for electromagnetic field measurement, Rydberg atomic receiver is capable of surmounting the inherent limitations on the operating bandwidth and detection sensitivity of the classical electronic counterparts. Against this background, this article provides an extensive overview of Rydberg atomic communication and sensing from fundamental theory, critical technologies to practical implementations. Firstly, the milestones of the Rydberg atomic receiver evolution was introduced. Then we provide a clear understanding of Rydberg atomic receiver mechanisms from the perspective of classical communication and sensing, and highlight the unprecedented advantages over traditional electronic receivers as well as the technical challenges. Afterwards, necessary fundamentals are presented including the Rydberg atoms, typical non-coherent/coherent structures, and explicit experimental configurations, followed by discussions on state-of-the-art development of the Rydberg atomic receiver. Specifically, advancements on electric-field detection methods for accurate measurement of amplitude, phase, frequency and polarization, are extensively investigated. Based on the established methodologies, recent innovations in Rydberg atomic communication and sensing are reviewed, ranging from waveform design and array-based signal processing to radar applications like localization, imaging and remote sensing, with practical experimental results presented. Finally, we summarize the promising research trends around Rydberg atomic receiver.
Rydberg atomic receivers (RARs) leverage the quantum coherence of highly excited atoms to overcome the intrinsic physical limitations of conventional radio frequency receivers (RFRs), particularly in sensitivity, and bandwidth. This innovative technology represents a paradigm shift in wireless communication systems. This paper systematically explains the fundamental sensing mechanisms of RARs, contrasts their differences from RFRs in working principles and architectures. We explore their advantages in emerging wireless communication scenarios, such as integrated sensing and communications, quantum Rydberg radar, and quantum space communications. Practical challenges, such as limited instantaneous bandwidth and nonlinear distortion, are identified. To address these issues, mitigation strategies and future research directions are also outlined, supporting the advancement of RAR-aided wireless systems.
Rydberg Atomic REceiver (RARE) is driving a paradigm shift in electromagnetic wave measurement by harnessing the electron transition phenomenon of Rydberg atoms. Operating at the quantum scale, such receivers have the potential to breakthrough the performance limit of classic receivers, sparking a revolution in physical-layer wireless communications. The objective of this article is to offer insights into RARE-empowered communication systems. We first provide a comprehensive introduction to the fundamental principles of RAREs. Then, a thorough comparison between RAREs and classic receivers is conducted in terms of the antenna size, sensitivity, and bandwidth. Subsequently, we overview the recent progresses in RARE-aided wireless communications, covering the frequency-division multiplexing, multiple- input-multiple-output, wireless sensing, and quantum many-body techniques. Moreover, the unique application of RARE in multi-band communication and sensing is unveiled, followed by numerical experiments to show its performance superiority over classic receivers by ~2.4 bps/ Hz in spectrum efficiency and ~7.2 dB in sensing accuracy. Finally, we conclude this article by providing promising research directions.
Rydberg atoms are atoms in their highly excited energy states. The physical properties of Rydberg atoms in the presence of external fields play an important role in quantum precision measurement. In recent years, radio-frequency electric field sensing based on Rydberg atoms has attracted significant interest. It is widely recognized as an electromagnetic sensing system fundamentally different from traditional ones. As a quantum sensor, it is expected to surpass several foundational limitations of traditional receivers, such as sensitivity, dynamic range and frequency bandwidth. It was reported that Rydberg sensing systems can sense microwaves of frequencies from DC up to 1THz. Its quantum nature would possibly avoid internal thermal (Johnson) noise, even at room temperature. Recent demonstrations have also observed high precision for terahertz imaging, strong fields sensing, proof-of-principle communication. However, limitations of this novel system have not been addressed, especially for a practical radar, communication or electronic warfare system. Here in this work, we first compare the architectures of different microwave receivers and then analyze the metrics of Rydberg microwave receivers, such as instantaneous bandwidth and dynamic range based on experimental results. We concluded by pointing out several main obstacles to overcome for realizing a practical state-of-the-art microwave receiver.
Next-generation space-air-ground-sea integrated networks (SAGSIN) impose unprecedented demands on advanced radio frequency (RF) receivers for full-spectrum agility, ultra-high sensitivity, and anti-jamming resilience, pushing conventional electronic receivers to their physical limits. To address these challenges, the Rydberg atomic quantum (RAQ) radio has emerged as a promising quantum-enabled receiver paradigm that directly maps electromagnetic fields onto atomic quantum states, offering an alternative to alleviate bottlenecks of conventional RF front ends. To provide a clear research roadmap, this survey presents a comprehensive review of RAQ radios by bridging atomic physics and wireless communications. Specifically, we first introduce the underlying quantum mechanisms, representative architectures, and atomic response models of RAQ radio. On this basis, state-of-the-art techniques for enhancing sensitivity, instantaneous bandwidth, and operating frequency are systematically reviewed, with particular emphasis on the inherent trade-offs among these key metrics. To connect quantum response with communication theory, we further analyze equivalent channel modeling frameworks for characterizing systematic performance limits. From the wireless communication perspective, some RAQ-enabled advanced technologies including cognitive, interference-resilient, low-frequency and multiple-input multiple-output (MIMO) communications are reviewed, alongside emerging deployment scenarios such as satellite networks, integrated sensing and communications, and reconfigurable intelligent surface-assisted systems. Finally, we identify open challenges and provide potential future directions of RAQ radio to inspire the further exploration.
Microwave sensing offers important applications in areas such as data communication and remote sensing. It has thus received much attention from academia, industry, and governments. Atomic wireless sensing uses the strong response of the large electric dipole moment of a Rydberg atom in response to an external field to achieve precise measurement of a radio frequency (RF) signal. This method offers advantages over traditional wireless sensing including ultrawide energy level transitions, which makes it responsive to RF electric fields over a wide bandwidth. Here, we briefly review the progress of electric field measurement based on Rydberg atoms. We discuss the properties of Rydberg atoms, measurement using Rydberg atoms, experimental progress in electric field measurement of different bands, and different methods for detecting electric fields (such as atomic superheterodyne, machine learning, and critically enhanced measurement). The development of Rydberg atomic measurement focuses on the advantages of Rydberg atomic sensing, especially when compared to conventional microwave receivers. This work is of major significance to developing Rydberg-based measurements in astronomy, remote sensing, and other fields.
We report on the development of detection methods for amplitude and phase of pulsed radio-frequency (RF) electromagnetic fields with Rydberg atoms. We begin with an overview of the basic principles of Rydberg-atom-based sensing and measurement of RF electromagnetic fields. An overview of the underlying atomic physics and the method for amplitude as well as phase sensing of electromagnetic radiation with Rydberg atoms is provided. Atomic RF receivers using Rydberg atoms for analog and digital communications and sensing of modulated RF fields are discussed. Detection of pulse-modulated RF and time-domain RF pulse waveform imaging with a Rydberg-atom receiver are demonstrated. The transient response of the Rydberg-atom vapor to a modulated RF field is observed at the 10-nanosecond level, from which a new lower limit to the achievable instantaneous signal bandwidth of atomic RF receivers is established. Finally, we present and describe a new method to measure the phase of an RF field implemented to not require an RF reference wave. The method employs phase-coherent excitation pathways involving the optical fields in the atomic sensing medium with the signal RF field. The optical RF phase-sensing approach lends itself to the realization of atomic RF sensors, measurement and imaging devices that are relevant to applications in RF communications and sensing.