As a key enabler for next-generation wireless systems, integrated sensing and communication (ISAC) requires significantly higher receiver sensitivity than conventional architectures to achieve long-range target detection, thereby introducing new challenges in receiver design. Among potential solutions, Rydberg atomic quantum receivers (RAQRs) have attracted growing attention for their unique quantum sensing capabilities. By exploiting the exceptional responsiveness of Rydberg atoms to electromagnetic fields, RAQRs enable direct and highly sensitive measurement of radio-frequency (RF) signals without relying on traditional antenna-based front ends. However, this enhanced sensitivity also renders them more vulnerable to interference, particularly from undesired targets and long-delay multipath components. To address this limitation, this article presents practical strategies for improving the interference robustness and selective reception performance of RAQRs in ISAC scenarios. Specifically, we begin with a comprehensive overview of RAQR principles and identify the interference-related challenges encountered in ISAC applications. Building on this foundation, we introduce the Actively Selective RAQR (AS-RAQR) architecture, which integrates tunable gating mechanisms to actively suppress unwanted signals. The proposed design is validated through representative case studies, followed by a discussion of open challenges and future research directions.
As a key enabler for next-generation wireless systems, integrated sensing and communication (ISAC) requires significantly higher receiver sensitivity than conventional architectures to achieve long-range target detection, thereby introducing new challenges in receiver design. Among potential solutions, Rydberg atomic quantum receivers (RAQRs) have attracted growing attention for their unique quantum sensing capabilities. By exploiting the exceptional responsiveness of Rydberg atoms to electromagnetic fields, RAQRs enable direct and highly sensitive measurement of radio-frequency (RF) signals without relying on traditional antenna-based front ends. However, this enhanced sensitivity also renders them more vulnerable to interference, particularly from undesired targets and long-delay multipath components. To address this limitation, this article presents practical strategies for improving the interference robustness and selective reception performance of RAQRs in ISAC scenarios. Specifically, we begin with a comprehensive overview of RAQR principles and identify the interference-related challenges encountered in ISAC applications. Building on this foundation, we introduce the Actively Selective RAQR (AS-RAQR) architecture, which integrates tunable gating mechanisms to actively suppress unwanted signals. The proposed design is validated through representative case studies, followed by a discussion of open challenges and future research directions.
Next-generation space-air-ground-sea integrated networks (SAGSIN) impose unprecedented demands on advanced radio frequency (RF) receivers for full-spectrum agility, ultra-high sensitivity, and anti-jamming resilience, pushing conventional electronic receivers to their physical limits. To address these challenges, the Rydberg atomic quantum (RAQ) radio has emerged as a promising quantum-enabled receiver paradigm that directly maps electromagnetic fields onto atomic quantum states, offering an alternative to alleviate bottlenecks of conventional RF front ends. To provide a clear research roadmap, this survey presents a comprehensive review of RAQ radios by bridging atomic physics and wireless communications. Specifically, we first introduce the underlying quantum mechanisms, representative architectures, and atomic response models of RAQ radio. On this basis, state-of-the-art techniques for enhancing sensitivity, instantaneous bandwidth, and operating frequency are systematically reviewed, with particular emphasis on the inherent trade-offs among these key metrics. To connect quantum response with communication theory, we further analyze equivalent channel modeling frameworks for characterizing systematic performance limits. From the wireless communication perspective, some RAQ-enabled advanced technologies including cognitive, interference-resilient, low-frequency and multiple-input multiple-output (MIMO) communications are reviewed, alongside emerging deployment scenarios such as satellite networks, integrated sensing and communications, and reconfigurable intelligent surface-assisted systems. Finally, we identify open challenges and provide potential future directions of RAQ radio to inspire the further exploration.
Rydberg atomic quantum receivers (RAQRs) are emerging quantum precision sensing platforms designed for receiving radio frequency (RF) signals. It relies on the creation of Rydberg atoms from normal atoms by exciting one or more electrons to a very high energy level, thereby making the atom sensitive to RF signals. RAQRs realize RF-to-optical conversions based on atom-light interactions relying on the so-called electromagnetically induced transparency (EIT) and Autler- Townes splitting (ATS) so that the desired RF signal can be read out optically. The large dipole moments of Rydberg atoms associated with rich choices of Rydberg states facilitate an ultra-high sensitivity (~nv⁄cm/√Hz) and an ultra-broadband tunability (direct-current to Terahertz). RAQRs also exhibit compelling scalability and lend themselves to the construction of innovative, compact receivers. Initial experimental studies have demonstrated their capabilities in classical wireless communications and sensing. To fully harness their potential in a wide variety of applications, we commence by outlining the underlying fundamentals of Rydberg atoms, followed by the principles and schemes of RAQRs. Then, we overview the state-of-the-art studies from both physics and communication societies. Furthermore, we conceive Rydberg atomic quantum single-input single-output (RAQ-SISO) and multiple-input multiple- output (RAQ-MIMO) schemes to facilitate the integration of RAQRs with classical wireless systems. Finally, we conclude with a set of potent research directions.
The significant progress of quantum sensing technologies offer numerous radical solutions for measuring a multitude of physical quantities at an unprecedented precision. Among them, Rydberg atomic quantum receivers (RAQRs) emerge as an eminent solution for detecting the electric field of radio frequency (RF) signals, exhibiting great potential in assisting classical wireless communications and sensing. So far, most experimental studies have aimed for the proof of physical concepts to reveal its promise, while the practical signal model of RAQR-aided wireless communications and sensing remained under-explored. Furthermore, the performance of RAQR-based wireless receivers and their advantages over classical RF receivers have not been fully characterized. To fill these gaps, we introduce the RAQR to the wireless community by presenting an end-to-end reception scheme. We then develop a corresponding equivalent baseband signal model relying on a realistic reception flow. Our scheme and model provide explicit design guidance to RAQR-aided wireless systems. We next study the performance of RAQR-aided wireless systems based on our model, and compare them to classical RF receivers. The results show that Doppler broadening-free RAQRs are capable of achieving a substantial received signal-to-noise ratio (SNR) gain of over 27 decibel (dB) and 40 dB in the photon shot limit and standard quantum limit regimes, respectively.
Rydberg atomic receivers (RARs) leverage the quantum coherence of highly excited atoms to overcome the intrinsic physical limitations of conventional radio frequency receivers (RFRs), particularly in sensitivity, and bandwidth. This innovative technology represents a paradigm shift in wireless communication systems. This paper systematically explains the fundamental sensing mechanisms of RARs, contrasts their differences from RFRs in working principles and architectures. We explore their advantages in emerging wireless communication scenarios, such as integrated sensing and communications, quantum Rydberg radar, and quantum space communications. Practical challenges, such as limited instantaneous bandwidth and nonlinear distortion, are identified. To address these issues, mitigation strategies and future research directions are also outlined, supporting the advancement of RAR-aided wireless systems.
Ground-satellite links for 6G networks face critical challenges, including severe path loss, tight size-weight-power limits, and congested spectrum, all of which significantly hinder the performance of traditional radio frequency (RF) front ends. This article introduces the Rydberg Atomic Quantum Receiver (RAQR) for onboard satellite systems, a millimetre-scale front end that converts radio fields to optical signals through atomic electromagnetically induced transparency. RAQR’s high sensitivity and high frequency selectivity have the potential to address link-budget, payload, and interference challenges while fitting within space constraints. Theoretically, a hybrid atomic–electronic design that is supported by a consistent signal model achieves spectral efficiency exceeding 6 bit/s/Hz, extends coverage by up to 1000 km, and improves sensing accuracy by two orders of magnitude relative to conventional RF receivers. The paper concludes with integration strategies, distributed-satellite concepts, and open research challenges for bringing RAQR-enabled satellite payloads into service.
Rydberg atomic quantum receivers (RAQR) exhibit exceptional sensitivity to radio-frequency (RF) signals, positioning them as promising candidates for next-generation wireless systems. Extending their capabilities to orthogonal frequency-division multiplexing (OFDM), however, requires atomic responses that go beyond broadband reception and are tailored to the structured interference of multicarrier signals. To bridge this gap, we develop an atomic-comb Rydberg receiver based on six-wave mixing (SWM) transduction. In particular, injecting a multi-tone local oscillator (LO) into the RAQR generates frequency-shifted replicas of the intrinsic SWM response. By subtly tuning the amplitude and phase of each LO tone, constructive and destructive interference can be selectively induced to preserve desired response components while attenuating harmful frequency offsets. Furthermore, we harness the response-reshaping capability of the proposed atomic comb to proactively mitigate OFDM interference. More explicitly, by exploiting the discrete difference-frequency structure of both carrier-frequency-offset (CFO)-induced and phase-noise (PN)-induced inter-carrier interference (ICI), we optimize the atomic-comb response to suppress dominant ICI components directly. We further reveal an intrinsic coupling between spectral shaping and the time-domain effective channel memory, motivating a joint optimization of both ICI and inter-symbol interference (ISI), which simultaneously suppresses inter-carrier leakage and post-cyclic-prefix (CP) tail energy. Extensive simulation results validate our atomic-comb design, unveiling that the proposed atomic comb can effectively reshape the receiver response over the OFDM, while mitigating ICI, shortening the effective channel memory, and substantially lowering CP overhead.