Translating superconducting quantum chip layouts into physically meaningful simulation records is a critical step in quantum hardware development, yet current datasets rarely capture the electromagnetic (EM) effects involved in this process. We propose SQChip-EM, an open layout to EM simulation dataset based on Qiskit Metal that links parameterized layout designs to Ansys HFSS and Q3D simulation results. Unlike abstract circuit datasets, SQChip-EM preserves layout dependent EM evidence through GDSII files, raw simulation outputs, and JSON annotations covering frequencies, anharmonicity, dispersive shifts, and coupling parameters. These annotations form reusable simulation level ''virtual chip'' records for downstream workflows such as initialization, calibration tuning, and control simulation. SQChip-EM also includes three illustrative benchmark tasks, including design to metric regression, specification feasibility classification, and inverse design retrieval, together with one downstream workflow use case. By releasing data, code, and evaluation protocols, SQChip-EM provides a standardized data resource for ML assisted quantum electronic design automation.
Translating superconducting quantum chip layouts into physically meaningful simulation records is a critical step in quantum hardware development, yet current datasets rarely capture the electromagnetic (EM) effects involved in this process. We propose SQChip-EM, an open layout to EM simulation dataset based on Qiskit Metal that links parameterized layout designs to Ansys HFSS and Q3D simulation results. Unlike abstract circuit datasets, SQChip-EM preserves layout dependent EM evidence through GDSII files, raw simulation outputs, and JSON annotations covering frequencies, anharmonicity, dispersive shifts, and coupling parameters. These annotations form reusable simulation level ''virtual chip'' records for downstream workflows such as initialization, calibration tuning, and control simulation. SQChip-EM also includes three illustrative benchmark tasks, including design to metric regression, specification feasibility classification, and inverse design retrieval, together with one downstream workflow use case. By releasing data, code, and evaluation protocols, SQChip-EM provides a standardized data resource for ML assisted quantum electronic design automation.
This work presents a comprehensive analytical and simulation-based study of superconducting quantum chip architectures, spanning both 2D planar and 3D-integrated designs. We first design and simulate a planar quantum chip layout using Qiskit Metal, which is imported into Ansys HFSS (High Frequency Structure Simulator) to construct a 3D model and perform electromagnetic simulations. A detailed analysis using Driven Modal, Eigenmode, Magnetostatic, and Q3D Capacitance Extraction solvers ensures our simulations accurately reflect physical behavior. The results are validated against analytical models from microwave engineering. pyEPR (Python Energy Participation Ratio) is used to extract key quantum metrics, including eigenfrequencies, quality factors, decoherence times, anharmonicity, cross-Kerr interactions, and participation ratios. Building on this planar design, we extend our study to a 3D-integrated flip-chip architecture featuring two superconducting qubits fabricated on separate high-resistivity silicon substrates. Using HFSS and analytical modeling, we show that detuned qubits maintain stable eigenfrequencies, quality factors, decoherence times, anharmonicity, and cross-Kerr interactions over varying substrate separation values. However, the introduction of dielectric loss tangents reduces quality factors which degrades coherence times and introduces an additional dephasing. These findings highlight the potential of 3D quantum integration, given minimal material imperfections.The planar and 3D designs together form a cohesive investigation into next-generation quantum hardware, with the 2D layout currently taped-out and under fabrication.
We propose SPICE-Q, a SPICE-inspired design-technology co-optimization framework for superconducting quantum processors. Rather than replacing tools such as HFSS, Qiskit Metal, pyEPR, SQcircuit, SQuADDS, scqubits, or QuTiP, SPICE-Q aims to connect them through a unified, traceable data chain spanning process rules, layout, electromagnetic simulation, energy-participation-ratio and circuit quantization, Hamiltonian extraction, noise analysis, cryogenic test, and manufacturing feedback. The central mapping is from process and PDK constraints to layout geometry, electromagnetic modes, equivalent circuit parameters, effective Hamiltonians, and finally metrics such as frequency, coupling, anharmonicity, decoherence, readout performance, and yield. This flow must capture Josephson-junction variability, transmon frequency allocation, resonator and Purcell constraints, coupler crosstalk, microwave routing, 3D interconnects, material/interface loss, package modes, and wafer-scale process statistics. By introducing standardized model interfaces, statistical parameter models, model cards, version governance, and closed-loop calibration from cryogenic and fabrication data, SPICE-Q frames superconducting quantum-chip design as an engineering workflow rather than a collection of isolated simulations. We argue that scalable and fault-tolerant quantum processors will require such a continuous model chain from device physics and electromagnetic fields to quantum dynamics, noise, manufacturability, and system-level yield.
Quantum computing is advancing rapidly, with superconducting quantum computing (SQC) emerging as one of the most promising platforms for scalable quantum information processing. In contrast to fabrication-focused approaches prevalent in current literature, this work presents a fully simulation-based design and tuning methodology for a small-scale superconducting quantum chip - addressing practical limitations posed by fabrication resource constraints - and consequently excludes physical chip fabrication or real-time performance evaluation (e.g., fidelity and error rate measurements). A meticulous, step-by-step electromagnetic simulation was conducted on the chip, designed using Qiskit Metal and Ansys Electronics, with qubit parameters tuned and verified using the Lumped Oscillator Model (LOM) and Energy Participation Ratio (EPR) methods. The design achieves good parameter convergence with relative tuning error rates (Δ%) below 0.05% after 15 adaptive passes and approximately 50,000 solved mesh elements, yielding an Energy Participation Ratio (EPR) of 91.8 % for the chip substrate (Silicon). Furthermore, the study includes a theoretical comparison between two fundamental qubit-qubit coupling schemes. A key contribution of this work lies in systematically analyzing how geometric variations in qubit design affect critical quantum parameters such as qubit frequencies, anharmonicities, coupling strengths, and dispersive shifts - thereby offering a comprehen-sive, simulation-driven framework for early-stage quantum chip prototyping.
Superconducting quantum computing is advancing toward the thousand- and even million-qubit regime, making wafer-scale fabrication an essential pathway for achieving large-scale, cost-effective quantum processors. This manufacturing paradigm imposes new requirements on quantum-chip electronic design automation (Q-EDA): design tools must not only generate layouts (GDSII files) that satisfy quantum-circuit physical constraints but also ensure that the design data can be seamlessly converted into a complete set of manufacturing files executable by a wafer foundry, thereby enabling reliable translation from design intent to physical chip. This paper focuses on this critical data-conversion pipeline and presents a systematic treatment of the Q-EDA technology stack for wafer-scale fabrication. Starting from GDSII as the single authoritative data source, we analyze the key stages including process-design-kit (PDK)-based design rule checking (DRC), layout-versus-schematic (LVS) verification, design for manufacturability (DFM) optimization, wafer layout planning, and mask data preparation (MDP). We describe the concrete architecture of a Q-EDA system, present nine quantum-specific DRC rules together with their physical underpinnings and a multi-layer process stack model, and benchmark the manufacturing data-flow coverage of mainstream Q-EDA tools. Finally, we discuss the core challenges and future directions in this field.
This paper proposes a fabless quantum-chip design and production architecture for superconducting quantum computing, centered on the SPICE-Q multiphysics simulation framework. The proposed ecosystem connects process-certified quantum PDKs, parameterized device cells, traceable model cards, SPICE-Q physical modeling languages, unified Q-EDA flows, foundry sign-off rules, cryogenic test feedback, and reusable quantum IP. In this model, design firms do not merely outsource fabrication; they prepare verified tape-outs under standardized process constraints and calibrated physical models. Its economic value lies in reducing repetitive device debugging, process exploration, and low-level layout effort, while its feasibility depends on PDK maturity, foundry yield, cryogenic test throughput, model-prediction accuracy, data-feedback mechanisms, and IP licensing boundaries. We argue that superconducting quantum chips can move from the current largely vertically integrated development model toward a fabless-foundry ecosystem only when hardware design is supported by standardized, verifiable, and reusable software and process interfaces. The required pillars are certified PDKs, PCell-based parameterized design, SPICE-Q cross-physics simulation, end-to-end Q-EDA automation, and a tradable quantum-IP market. By adapting lessons from the classical semiconductor industry to quantum hardware, this framework defines a path toward scalable, manufacturable, and commercially reusable superconducting quantum-chip design.
Accurate electromagnetic (EM) feature extraction, including element characterization, eigenmodes, and field distributions, is essential for superconducting quantum circuit design. To streamline this process, we present a workflow built around Palace, an open-source, high-performance finite element method solver tailored for quantum applications. Starting from circuit layouts, the workflow automates mesh generation, multiple EM solver processing, and EM-to-Hamiltonian post-processing. We benchmark the workflow on a chip with bare resonators and qubits coupled with readout resonators, achieving resonator frequencies prediction within 0.3% and 3 out of 4 external couplings within 16% of cryogenic measurements. These results demonstrate open-source EM tools can match commercial accuracy while offering scalable, license-free analysis. Our Palace-based workflow provides an accessible and extensible foundation for rapid superconducting circuit development and materials-loss studies.