Bulk Lithium Niobate Cavity Electro-Optic Transducers

Mihir Khanna, Thomas Purdy

Published Jan 1, 2026• 0 citations

Abstract

We demonstrate all-dielectric bulk lithium niobate cavity electro-optic transducers achieving 1% microwave to optical photon conversion efficiency at room temperature. We are working toward devices that enable quantum sensing of microwave fields.

DOI: 10.1364/cleo_fs.2026.fm3d.7

Related papers

All-Dielectric Resonant Cavity Electro-Optic Transduction Between Microwave and Telecom

Mihir Khanna, Yang Hu, Thomas P. Purdy

We present a resonant electro-optic transducer for efficient conversion between microwave and telecom wavelength photons. Our platform employs a bulk lithium niobate crystal whose large dielectric constant creates wavelength-scale confinement of microwave photons. By incorporating this crystal within a high-finesse Fabry - Perot optical cavity, microwave photons couple to optical photons through the electro-optic effect. We demonstrate the ability to tune our system into triply resonant operation, where microwave photons, optical pump photons, and upconverted optical photons are simultaneously resonant with high quality factor electromagnetic modes of the system. The device achieves photon number conversion efficiency at the percent level, comparable to state-of-the-art devices at room temperature -- sufficient to resolve the thermal occupation of the microwave mode -- while avoiding the noise and loss associated with metal electrodes. These results establish our all-dielectric devices as a promising platform for high-precision sensing of optically detected microwave fields and as a viable route toward single-photon-level microwave - optical quantum transduction.

quant-pharXiv:2601.13199Jan 20, 20260 citations

All-dielectric resonant cavity electro-optic transduction between microwave and telecom

Mihir Khanna, Yang Hu, Thomas Purdy

Achieving efficient microwave–optical transduction is a critical challenge for quantum networks where information is shared optically across disparate microwave systems and for coherent optical detection and manipulation of microwave states. Resonant electro-optic systems are being pursued as a means of efficiently bridging these frequencies. Here, we present a platform that employs a bulk lithium niobate crystal whose large dielectric constant creates wavelength-scale confinement of microwave photons. By incorporating this crystal within a high-finesse Fabry–Pérot optical cavity, microwave photons couple to optical photons through the electro-optic effect. We demonstrate the ability to tune our system into triply resonant operation, where microwave photons, optical pump photons, and upconverted optical photons are simultaneously resonant with high quality factor electromagnetic modes of the system. The device achieves photon-number conversion efficiency at the percent level, comparable to that of state-of-the-art devices at room temperature—sufficient to resolve the thermal occupation of the microwave mode—by taking advantage of the high-power handling, low loss, and low noise of all-dielectric devices. These results establish our all-dielectric devices as a promising platform for high-precision sensing of optically detected microwave fields and as a viable route toward single-photon-level microwave–optical quantum transduction.

OpticaMay 29, 20260 citations

Cavity electro-optics in thin-film lithium niobate for efficient microwave-to-optical transduction

Jeffrey Holzgrafe, Neil E. Sinclair, Di Zhu +6 more

Linking superconducting quantum devices to optical fibers via microwave-optical quantum transducers may enable large-scale quantum networks. For this application, transducers based on the Pockels electro-optic (EO) effect are promising for their direct conversion mechanism, high bandwidth, and potential for low-noise operation. However, previously demonstrated EO transducers require large optical pump power to overcome weak EO coupling and reach high efficiency. Here, we create an EO transducer in thin-film lithium niobate, a platform that provides low optical loss and strong EO coupling. We demonstrate on-chip transduction efficiencies of up to and of optical pump power. The transduction efficiency can be improved by further reducing the microwave resonator’s piezoelectric coupling to acoustic modes, increasing the optical resonator quality factor to previously demonstrated levels, and changing the electrode geometry for enhanced EO coupling. We expect that with further development, EO transducers in thin-film lithium niobate can achieve near-unity efficiency with low optical pump power.

arXiv:2005.00939OpticaNov 17, 2020136 citations

Cryogenic microwave-to-optical conversion using a triply resonant lithium-niobate-on-sapphire transducer

Timothy P. McKenna, Jeremy D. Witmer, Rishi N. Patel +6 more

Quantum networks are likely to have a profound impact on the way we compute and communicate in the future. In order to wire together superconducting quantum processors over kilometer-scale distances, we need transducers that can generate entanglement between the microwave and optical domains with high fidelity. We present an integrated electro-optic transducer that combines low-loss lithium niobate photonics with superconducting microwave resonators on a sapphire substrate. Our triply resonant device operates in a dilution refrigerator and converts microwave photons to optical photons with an on-chip efficiency of 6.6 × 10 − 6 and a conversion bandwidth of 20 MHz. We discuss design trade-offs in this device, including strategies to manage acoustic loss, and outline ways to increase the conversion efficiency in the future.

arXiv:2005.00897OpticaNov 17, 2020129 citations

Methods for microwave characterization of electro-optic crystals for quantum transduction

Silvia Zorzetti, Changqing Wang, I. Gonin +3 more

Microwave-optic quantum transducers are essential devices to develop distributed quantum networks and implement related quantum communication protocols. Three dimensional high-coherence time microwave cavities embedded with electro-optic nonlinear dielectric materials provide promising platforms to boost the efficiency of the microwave-optic frequency conversion. However, so far, the properties for such dielectric crystals operating at milli-Kelvin cryogenic temperatures have not been well understood. Here, we propose a scheme to precisely measure and benchmark the dielectric constant and analyze the dissipation mechanisms of electro-optic materials, such as Lithium Niobate, at the quantum threshold. We will use Fermilab’s three dimensional superconducting cavities with long coherence time. The proposed method of microwave characterization lays the foundations for engineering quantum transduction devices and quantum sensors with high conversion efficiency and fidelity.

IEEE International Conference on Quantum Computing and Engineering (QCE)Sep 1, 20220 citations

Cavity electro-optics in thin-film lithium niobate

Holzgrafe, Jeffrey Cole

Quantum networks of superconducting qubits linked by optical channels could leverage both the quantum information processing capabilities of superconducting circuits and the long communication distances provided by optical photons. Such networks would require high efficiency, low noise, and wide bandwidth transducers between microwave and optical frequencies. Transducers based on the Pockels electro-optic (EO) effect are particularly promising in this application for their direct conversion mechanism and potential for strong performance. EO transducers could also be used for sensitive optical modulators and low-noise detection of microwave and millimeter-wave signals. This dissertation presents recent work to create cavity EO transducers in thin-film lithium niobate, an integrated photonics platform that provides low optical loss and strong EO coupling. I first describe the theory of cavity electro-optics and how it can be used to generate high-efficiency transduction between microwave and optical fields. An initial device is presented and characterized, demonstrating per-photon on-chip transduction efficiencies of up to (2.7 ± 0.3) × 10^−5. A key benefit of the device described here, which is based on photonic molecule modes, is the ability to use a static electro-optic bias to trim the transducer into resonance. However, we find the migration of free carriers in thin-film lithium niobate reduces the EO response of the device to static fields, making such trimming ineffective. This carrier migration is a key challenge for enabling the promise of low-power electro-optics provided by thin-film lithium niobate devices. I characterize the low-frequency electro-optic response, which suggests that conduction occurs on the etched surface of lithium niobate. I show how this conduction can be reduced – and low-frequency EO performance improved – by changing the electrode design and annealing the devices. Following this, I describe the design and initial characterization of an improved transducer device. Finally, I describe a scheme by which even relatively low-efficiency transducers could be used to generate remote entanglement using an optically heralding scheme. Demonstration of such a system appears possible with current devices, suggesting that small opticallymediated quantum networks of superconducting qubits may be feasible soon.

Jan 1, 20220 citations