Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Conference on Quantum Computing and Engineering (QCE)

Methods for microwave characterization of electro-optic crystals for quantum transduction

Silvia Zorzetti, Changqing Wang, I. Gonin, S. Kazakov, Ivan Nekrashevich, Vyacheslav P. Yakovlev

Published Sep 1, 2022• 0 citations
Publisher

Abstract

Microwave-optic quantum transducers are essential devices to develop distributed quantum networks and implement related quantum communication protocols. Three dimensional high-coherence time microwave cavities embedded with electro-optic nonlinear dielectric materials provide promising platforms to boost the efficiency of the microwave-optic frequency conversion. However, so far, the properties for such dielectric crystals operating at milli-Kelvin cryogenic temperatures have not been well understood. Here, we propose a scheme to precisely measure and benchmark the dielectric constant and analyze the dissipation mechanisms of electro-optic materials, such as Lithium Niobate, at the quantum threshold. We will use Fermilab’s three dimensional superconducting cavities with long coherence time. The proposed method of microwave characterization lays the foundations for engineering quantum transduction devices and quantum sensors with high conversion efficiency and fidelity.

DOI
10.1109/qce53715.2022.00062

Related papers

Development of electro-optical quantum transducers based on three-dimensional superconducting cavities

Silvia Zorzetti

Quantum transducers enable the conversion of quantum information and signals between different physical platforms. Based on the pioneering works in three-dimensional superconducting cavity technology developed at Fermilab, we are advancing the development of three-dimensional microwave-optical transducers and exploring their applications in quantum information processing and sensing. We present our progress in the design, fabrication, and characterization of three-dimensional microwave cavities integrated with bulk lithium niobate resonators. The material characterization using three-dimensional cavities based on a resonant-type method allows for understanding of complex permittivity and loss mechanism of electro-optic materials at cryogenic temperatures. We also evaluate the potential of the high-efficiency quantum transducers in enhancing the performance of quantum sensors for applications such as dark matter detection, compared to conventional homodyne detection approaches. This manuscript has been authored by Fermi Research Alliance, LLC under Contract No. DE-AC0207CH11359 with the U.S. Department of Energy, Office of Science, Office of High Energy Physics. This work is funded by the DOE's Early Career Research Program. This research used resources of the U.S. Department of Energy, Office of Science, National Quantum Information Science Research Centers, Superconducting Quantum Materials and Systems Center (SQMS) under Contract No. DE-AC02-07CH11359.

•Sep 26, 2024•0 citations

All-Dielectric Resonant Cavity Electro-Optic Transduction Between Microwave and Telecom

Mihir Khanna, Yang Hu, Thomas P. Purdy

We present a resonant electro-optic transducer for efficient conversion between microwave and telecom wavelength photons. Our platform employs a bulk lithium niobate crystal whose large dielectric constant creates wavelength-scale confinement of microwave photons. By incorporating this crystal within a high-finesse Fabry - Perot optical cavity, microwave photons couple to optical photons through the electro-optic effect. We demonstrate the ability to tune our system into triply resonant operation, where microwave photons, optical pump photons, and upconverted optical photons are simultaneously resonant with high quality factor electromagnetic modes of the system. The device achieves photon number conversion efficiency at the percent level, comparable to state-of-the-art devices at room temperature -- sufficient to resolve the thermal occupation of the microwave mode -- while avoiding the noise and loss associated with metal electrodes. These results establish our all-dielectric devices as a promising platform for high-precision sensing of optically detected microwave fields and as a viable route toward single-photon-level microwave - optical quantum transduction.

quant-pharXiv:2601.13199•Jan 20, 2026•0 citations

All-dielectric resonant cavity electro-optic transduction between microwave and telecom

Mihir Khanna, Yang Hu, Thomas Purdy

Achieving efficient microwave–optical transduction is a critical challenge for quantum networks where information is shared optically across disparate microwave systems and for coherent optical detection and manipulation of microwave states. Resonant electro-optic systems are being pursued as a means of efficiently bridging these frequencies. Here, we present a platform that employs a bulk lithium niobate crystal whose large dielectric constant creates wavelength-scale confinement of microwave photons. By incorporating this crystal within a high-finesse Fabry–Pérot optical cavity, microwave photons couple to optical photons through the electro-optic effect. We demonstrate the ability to tune our system into triply resonant operation, where microwave photons, optical pump photons, and upconverted optical photons are simultaneously resonant with high quality factor electromagnetic modes of the system. The device achieves photon-number conversion efficiency at the percent level, comparable to that of state-of-the-art devices at room temperature—sufficient to resolve the thermal occupation of the microwave mode—by taking advantage of the high-power handling, low loss, and low noise of all-dielectric devices. These results establish our all-dielectric devices as a promising platform for high-precision sensing of optically detected microwave fields and as a viable route toward single-photon-level microwave–optical quantum transduction.

Optica•May 29, 2026•0 citations

High-efficiency microwave-optical quantum transduction based on a cavity electro-optic superconducting system with long coherence time

Changqing Wang, I. Gonin, Anna Grassellino +4 more

Abstract Frequency conversion between microwave and optical photons is a key enabling technology to create links between superconducting quantum processors and to realize distributed quantum networks. We propose a microwave-optical transduction platform based on long-coherence time superconducting radio-frequency (SRF) cavities coupled to electro-optic optical cavities to mitigate the loss mechanisms that limit the attainment of high conversion efficiency. We optimize the microwave-optical field overlap and optical coupling losses in the design while achieving long microwave and optical photon lifetime at milli-Kelvin temperatures. This represents a significant enhancement of the transduction efficiency up to 50% under incoming pump power of 140 μW, which allows the conversion of few-photon quantum signals. Furthermore, this scheme exhibits high resolution for optically reading out the dispersive shift induced by a superconducting transmon qubit coupled to the SRF cavity. We also show that low microwave losses enhance the fidelity of heralded entanglement generation between two remote quantum systems. Finally, high precision in quantum sensing can be reached below the standard quantum limit.

arXiv:2206.15467•npj Quantum Information•Dec 21, 2022•36 citations

Microwave dielectric properties of LiNbO$_{\mathbf{3}}$ and AlN at millikelvin temperatures and single-photon power

Alessandro Reineri, Francesco Crisa, Maithlee Shinde +8 more

Efficient bidirectional microwave-optical photon conversion is a key capability for scaling superconducting quantum processors into distributed networks. However, achieving the necessary conversion efficiency requires filling a critical knowledge gap in understanding the loss mechanisms of electro-optic materials. Here, we characterize the microwave properties of single-crystal bulk LiNbO3 and AlN over a broad range of powers, down to single-photon levels, and spanning from millikelvin temperatures to above 1 K. We demonstrate that both materials exhibit two-level systems (TLS) behavior, while piezoelectric-related losses are excluded. We show that TLS-induced dissipation is predominantly localized on the surface rather than being an intrinsic bulk property, a result further corroborated by room-temperature 3D XPS and time-of-flight SIMS analyses. These findings provide useful insights to engineer hybrid architectures that integrate bulk electro-optic crystals within superconducting cavities, proving that microwave quality factors compatible with high-efficiency microwave-optical transduction are within reach.

quant-pharXiv:2609.22002•Sep 21, 2026

Microwave dielectric properties of LiNbO3 and AlN at millikelvin temperatures and single-photon power

Alessandro Reineri, Francesco Crisa, Akshay Murthy +8 more

Efficient bidirectional microwave-optical photon conversion is a key capability for scaling superconducting quantum processors into distributed networks. Achieving the necessary conversion efficiency requires filling a critical knowledge gap in understanding the loss mechanisms of electro-optic materials. Here, we characterize the microwave properties of single-crystal bulk LiNbO 3 and AlN over a broad range of powers, down to single-photon levels, and spanning from millikelvin temperatures to above 1 K. We demonstrate that both materials exhibit two-level systems (TLS) behavior, while piezoelectric-related losses are excluded. We show that TLS-induced dissipation is predominantly localized on the surface rather than being an intrinsic bulk property, a result further corroborated by room-temperature 3D XPS and time-of-flight SIMS analyses. These findings provide useful insights to engineer hybrid architectures that integrate bulk electro-optic crystals within superconducting cavities, proving that microwave quality factors compatible with high-efficiency microwave–optical transduction are within reach.

EPJ Quantum Technology•Oct 13, 2026•0 citations
Microwave-optic quantum transducers are essential devices to develop distributed quantum networks and implement related quantum communication protocols. Three dimensional high-coherence time microwave cavities embedded with electro-optic nonlinear dielectric materials provide promising platforms to boost the efficiency of the microwave-optic frequency conversion. However, so far, the properties for such dielectric crystals operating at milli-Kelvin cryogenic temperatures have not been well understood. Here, we propose a scheme to precisely measure and benchmark the dielectric constant and analyze the dissipation mechanisms of electro-optic materials, such as Lithium Niobate, at the quantum threshold. We will use Fermilab’s three dimensional superconducting cavities with long coherence time. The proposed method of microwave characterization lays the foundations for engineering quantum transduction devices and quantum sensors with high conversion efficiency and fidelity.
Quantum transducers enable the conversion of quantum information and signals between different physical platforms. Based on the pioneering works in three-dimensional superconducting cavity technology developed at Fermilab, we are advancing the development of three-dimensional microwave-optical transducers and exploring their applications in quantum information processing and sensing. We present our progress in the design, fabrication, and characterization of three-dimensional microwave cavities integrated with bulk lithium niobate resonators. The material characterization using three-dimensional cavities based on a resonant-type method allows for understanding of complex permittivity and loss mechanism of electro-optic materials at cryogenic temperatures. We also evaluate the potential of the high-efficiency quantum transducers in enhancing the performance of quantum sensors for applications such as dark matter detection, compared to conventional homodyne detection approaches. This manuscript has been authored by Fermi Research Alliance, LLC under Contract No. DE-AC0207CH11359 with the U.S. Department of Energy, Office of Science, Office of High Energy Physics. This work is funded by the DOE's Early Career Research Program. This research used resources of the U.S. Department of Energy, Office of Science, National Quantum Information Science Research Centers, Superconducting Quantum Materials and Systems Center (SQMS) under Contract No. DE-AC02-07CH11359.
We present a resonant electro-optic transducer for efficient conversion between microwave and telecom wavelength photons. Our platform employs a bulk lithium niobate crystal whose large dielectric constant creates wavelength-scale confinement of microwave photons. By incorporating this crystal within a high-finesse Fabry - Perot optical cavity, microwave photons couple to optical photons through the electro-optic effect. We demonstrate the ability to tune our system into triply resonant operation, where microwave photons, optical pump photons, and upconverted optical photons are simultaneously resonant with high quality factor electromagnetic modes of the system. The device achieves photon number conversion efficiency at the percent level, comparable to state-of-the-art devices at room temperature -- sufficient to resolve the thermal occupation of the microwave mode -- while avoiding the noise and loss associated with metal electrodes. These results establish our all-dielectric devices as a promising platform for high-precision sensing of optically detected microwave fields and as a viable route toward single-photon-level microwave - optical quantum transduction.
Achieving efficient microwave–optical transduction is a critical challenge for quantum networks where information is shared optically across disparate microwave systems and for coherent optical detection and manipulation of microwave states. Resonant electro-optic systems are being pursued as a means of efficiently bridging these frequencies. Here, we present a platform that employs a bulk lithium niobate crystal whose large dielectric constant creates wavelength-scale confinement of microwave photons. By incorporating this crystal within a high-finesse Fabry–Pérot optical cavity, microwave photons couple to optical photons through the electro-optic effect. We demonstrate the ability to tune our system into triply resonant operation, where microwave photons, optical pump photons, and upconverted optical photons are simultaneously resonant with high quality factor electromagnetic modes of the system. The device achieves photon-number conversion efficiency at the percent level, comparable to that of state-of-the-art devices at room temperature—sufficient to resolve the thermal occupation of the microwave mode—by taking advantage of the high-power handling, low loss, and low noise of all-dielectric devices. These results establish our all-dielectric devices as a promising platform for high-precision sensing of optically detected microwave fields and as a viable route toward single-photon-level microwave–optical quantum transduction.
Abstract Frequency conversion between microwave and optical photons is a key enabling technology to create links between superconducting quantum processors and to realize distributed quantum networks. We propose a microwave-optical transduction platform based on long-coherence time superconducting radio-frequency (SRF) cavities coupled to electro-optic optical cavities to mitigate the loss mechanisms that limit the attainment of high conversion efficiency. We optimize the microwave-optical field overlap and optical coupling losses in the design while achieving long microwave and optical photon lifetime at milli-Kelvin temperatures. This represents a significant enhancement of the transduction efficiency up to 50% under incoming pump power of 140 μW, which allows the conversion of few-photon quantum signals. Furthermore, this scheme exhibits high resolution for optically reading out the dispersive shift induced by a superconducting transmon qubit coupled to the SRF cavity. We also show that low microwave losses enhance the fidelity of heralded entanglement generation between two remote quantum systems. Finally, high precision in quantum sensing can be reached below the standard quantum limit.
Microwave dielectric properties of LiNbO3_{\mathbf{3}}3​ and AlN at millikelvin temperatures and single-photon power
Efficient bidirectional microwave-optical photon conversion is a key capability for scaling superconducting quantum processors into distributed networks. However, achieving the necessary conversion efficiency requires filling a critical knowledge gap in understanding the loss mechanisms of electro-optic materials. Here, we characterize the microwave properties of single-crystal bulk LiNbO3 and AlN over a broad range of powers, down to single-photon levels, and spanning from millikelvin temperatures to above 1 K. We demonstrate that both materials exhibit two-level systems (TLS) behavior, while piezoelectric-related losses are excluded. We show that TLS-induced dissipation is predominantly localized on the surface rather than being an intrinsic bulk property, a result further corroborated by room-temperature 3D XPS and time-of-flight SIMS analyses. These findings provide useful insights to engineer hybrid architectures that integrate bulk electro-optic crystals within superconducting cavities, proving that microwave quality factors compatible with high-efficiency microwave-optical transduction are within reach.
Efficient bidirectional microwave-optical photon conversion is a key capability for scaling superconducting quantum processors into distributed networks. Achieving the necessary conversion efficiency requires filling a critical knowledge gap in understanding the loss mechanisms of electro-optic materials. Here, we characterize the microwave properties of single-crystal bulk LiNbO 3 and AlN over a broad range of powers, down to single-photon levels, and spanning from millikelvin temperatures to above 1 K. We demonstrate that both materials exhibit two-level systems (TLS) behavior, while piezoelectric-related losses are excluded. We show that TLS-induced dissipation is predominantly localized on the surface rather than being an intrinsic bulk property, a result further corroborated by room-temperature 3D XPS and time-of-flight SIMS analyses. These findings provide useful insights to engineer hybrid architectures that integrate bulk electro-optic crystals within superconducting cavities, proving that microwave quality factors compatible with high-efficiency microwave–optical transduction are within reach.