Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2005.00939 · Optica

Cavity electro-optics in thin-film lithium niobate for efficient microwave-to-optical transduction

Jeffrey Holzgrafe, Neil E. Sinclair, Di Zhu, Amirhassan Shams‐Ansari, Marco Colangelo, Yaowen Hu, Mian Zhang, Karl K. Berggren, Marko Lončar

Published Nov 17, 2020• 136 citations
arXivHTMLPDF

Abstract

Linking superconducting quantum devices to optical fibers via microwave-optical quantum transducers may enable large-scale quantum networks. For this application, transducers based on the Pockels electro-optic (EO) effect are promising for their direct conversion mechanism, high bandwidth, and potential for low-noise operation. However, previously demonstrated EO transducers require large optical pump power to overcome weak EO coupling and reach high efficiency. Here, we create an EO transducer in thin-film lithium niobate, a platform that provides low optical loss and strong EO coupling. We demonstrate on-chip transduction efficiencies of up to and of optical pump power. The transduction efficiency can be improved by further reducing the microwave resonator’s piezoelectric coupling to acoustic modes, increasing the optical resonator quality factor to previously demonstrated levels, and changing the electrode geometry for enhanced EO coupling. We expect that with further development, EO transducers in thin-film lithium niobate can achieve near-unity efficiency with low optical pump power.

DOI
10.1364/optica.397513

Related papers

Cavity electro-optics in thin-film lithium niobate

Holzgrafe, Jeffrey Cole

Quantum networks of superconducting qubits linked by optical channels could leverage both the quantum information processing capabilities of superconducting circuits and the long communication distances provided by optical photons. Such networks would require high efficiency, low noise, and wide bandwidth transducers between microwave and optical frequencies. Transducers based on the Pockels electro-optic (EO) effect are particularly promising in this application for their direct conversion mechanism and potential for strong performance. EO transducers could also be used for sensitive optical modulators and low-noise detection of microwave and millimeter-wave signals. This dissertation presents recent work to create cavity EO transducers in thin-film lithium niobate, an integrated photonics platform that provides low optical loss and strong EO coupling. I first describe the theory of cavity electro-optics and how it can be used to generate high-efficiency transduction between microwave and optical fields. An initial device is presented and characterized, demonstrating per-photon on-chip transduction efficiencies of up to (2.7 ± 0.3) × 10^−5. A key benefit of the device described here, which is based on photonic molecule modes, is the ability to use a static electro-optic bias to trim the transducer into resonance. However, we find the migration of free carriers in thin-film lithium niobate reduces the EO response of the device to static fields, making such trimming ineffective. This carrier migration is a key challenge for enabling the promise of low-power electro-optics provided by thin-film lithium niobate devices. I characterize the low-frequency electro-optic response, which suggests that conduction occurs on the etched surface of lithium niobate. I show how this conduction can be reduced – and low-frequency EO performance improved – by changing the electrode design and annealing the devices. Following this, I describe the design and initial characterization of an improved transducer device. Finally, I describe a scheme by which even relatively low-efficiency transducers could be used to generate remote entanglement using an optically heralding scheme. Demonstration of such a system appears possible with current devices, suggesting that small opticallymediated quantum networks of superconducting qubits may be feasible soon.

•Jan 1, 2022•0 citations

Stable, bidirectional electro-optic transduction in thin film lithium tantalate

Christopher J. Axline, Stephan Gamper, Phoebe M. Tengdin +6 more

Efficient and stable microwave-optical transduction is a key enabling technology for distributed superconducting quantum computing and heterogeneous quantum networks. Electro-optic transducers based on thin-film lithium niobate (TFLN) have shown strong promise, but demonstrations to date have been limited by various factors such as low frequency bias drift, low efficiency, fabrication complexity, and scalability. Here we demonstrate the first integrated electro-optic microwave-optical transducers realized in thin-film lithium tantalate (TFLT), a material platform offering Pockels nonlinearity comparable to TFLN together with improved bias stability and high-power handling. We fabricate superconducting microwave resonators coupled to tunable photonic-molecule optical resonators using wafer-scale deep ultraviolet lithography, offering high-throughput production of hundreds of devices per wafer. Across six devices we observe coherent bidirectional conversion between C-band optical photons and 4.9-5.5 GHz microwave photons, with measured on-chip efficiencies and inferred single-photon coupling rates g_0/2π ~ 1 kHz consistent with theory. Continuous operation over multiple days is achieved using a static bias field with minimal feedback, demonstrating a major operational advantage. We further characterize optical loss statistics, microwave resonator performance, and optically induced added noise under pulsed pumping, finding less than one added photon for 100 microsecond pulses at the highest measured efficiencies. These results establish TFLT as a scalable and robust electro-optic platform for future quantum interconnects and modular quantum processors.

quant-pharXiv:2606.12726•Jun 12, 2026•0 citations

Bidirectional interconversion of microwave and light with thin-film lithium niobate

Yuntao Xu, Ayed Al Sayem, Linran Fan +7 more

Abstract Superconducting cavity electro-optics presents a promising route to coherently convert microwave and optical photons and distribute quantum entanglement between superconducting circuits over long-distance. Strong Pockels nonlinearity and high-performance optical cavity are the prerequisites for high conversion efficiency. Thin-film lithium niobate (TFLN) offers these desired characteristics. Despite significant recent progresses, only unidirectional conversion with efficiencies on the order of 10 −5 has been realized. In this article, we demonstrate the bidirectional electro-optic conversion in TFLN-superconductor hybrid system, with conversion efficiency improved by more than three orders of magnitude. Our air-clad device architecture boosts the sustainable intracavity pump power at cryogenic temperatures by suppressing the prominent photorefractive effect that limits cryogenic performance of TFLN, and reaches an efficiency of 1.02% (internal efficiency of 15.2%). This work firmly establishes the TFLN-superconductor hybrid EO system as a highly competitive transduction platform for future quantum network applications.

arXiv:2012.14909•Nature Communications•Jul 22, 2021•126 citations

Bidirectional Microwave-Optical Conversion with an Integrated Soft-Ferroelectric Barium Titanate Transducer

Charles Möhl, Annina Riedhauser, Max Glantschnig +7 more

Efficient, low-noise, and high-bandwidth transduction between optical and microwave photons is key to long-range quantum communication between distant superconducting quantum processors. Recent demonstrations of microwave-optical transduction using the broadband direct electro-optic (Pockels) effect in optical thin films made of AlN or LiNbO 3 have shown promise. To improve efficiency and added noise, materials with larger Pockels coefficients, such as the soft ferroelectrics BaTiO 3 or SrTiO 3 , are needed. However, these materials require adapted designs and fabrication approaches due to their nonlinear and, in some cases, hysteretic electro-optic response. Here, we engineer an on-chip, triply resonant transducer comprising low-loss BaTiO 3 -on- SiO 2 waveguides monolithically integrated with a superconducting microwave resonator made of Nb. We demonstrate bidirectional microwave-optical transduction and reach total off-chip efficiencies of 1 × 10 − 6 using pulsed pumping. The device design permits poling of the ferroelectric material without introducing excess microwave loss, exploiting superconducting air bridges fabricated using only subtractive patterning steps. In addition, we investigate optically induced heating, revealing fast thermalization and quasiparticle resilience of the microwave resonator. Our transducer concept and fabrication process are applicable to other materials with a large bias-induced Pockels effect like SrTiO 3 and pave the way for efficient, low-power quantum interconnects.

arXiv:2501.09728•Physical Review X•Aug 8, 2025•3 citations

All-Dielectric Resonant Cavity Electro-Optic Transduction Between Microwave and Telecom

Mihir Khanna, Yang Hu, Thomas P. Purdy

We present a resonant electro-optic transducer for efficient conversion between microwave and telecom wavelength photons. Our platform employs a bulk lithium niobate crystal whose large dielectric constant creates wavelength-scale confinement of microwave photons. By incorporating this crystal within a high-finesse Fabry - Perot optical cavity, microwave photons couple to optical photons through the electro-optic effect. We demonstrate the ability to tune our system into triply resonant operation, where microwave photons, optical pump photons, and upconverted optical photons are simultaneously resonant with high quality factor electromagnetic modes of the system. The device achieves photon number conversion efficiency at the percent level, comparable to state-of-the-art devices at room temperature -- sufficient to resolve the thermal occupation of the microwave mode -- while avoiding the noise and loss associated with metal electrodes. These results establish our all-dielectric devices as a promising platform for high-precision sensing of optically detected microwave fields and as a viable route toward single-photon-level microwave - optical quantum transduction.

quant-pharXiv:2601.13199•Jan 20, 2026•0 citations

On-Chip Optical Filters for Microwave-Optical Quantum Transduction in Thin-Film Lithium Niobate

Jeffrey Holzgrafe, Hana Warner, Di Zhu +7 more

We describe a low-loss on-chip optical filter network designed to separate pump and signal photons in a cavity electro-optic microwave-optical transducer for enhanced transduction performance.

Conference on Lasers and Electro-Optics•Jan 1, 2021•0 citations
Linking superconducting quantum devices to optical fibers via microwave-optical quantum transducers may enable large-scale quantum networks. For this application, transducers based on the Pockels electro-optic (EO) effect are promising for their direct conversion mechanism, high bandwidth, and potential for low-noise operation. However, previously demonstrated EO transducers require large optical pump power to overcome weak EO coupling and reach high efficiency. Here, we create an EO transducer in thin-film lithium niobate, a platform that provides low optical loss and strong EO coupling. We demonstrate on-chip transduction efficiencies of up to and of optical pump power. The transduction efficiency can be improved by further reducing the microwave resonator’s piezoelectric coupling to acoustic modes, increasing the optical resonator quality factor to previously demonstrated levels, and changing the electrode geometry for enhanced EO coupling. We expect that with further development, EO transducers in thin-film lithium niobate can achieve near-unity efficiency with low optical pump power.
Quantum networks of superconducting qubits linked by optical channels could leverage both the quantum information processing capabilities of superconducting circuits and the long communication distances provided by optical photons. Such networks would require high efficiency, low noise, and wide bandwidth transducers between microwave and optical frequencies. Transducers based on the Pockels electro-optic (EO) effect are particularly promising in this application for their direct conversion mechanism and potential for strong performance. EO transducers could also be used for sensitive optical modulators and low-noise detection of microwave and millimeter-wave signals. This dissertation presents recent work to create cavity EO transducers in thin-film lithium niobate, an integrated photonics platform that provides low optical loss and strong EO coupling. I first describe the theory of cavity electro-optics and how it can be used to generate high-efficiency transduction between microwave and optical fields. An initial device is presented and characterized, demonstrating per-photon on-chip transduction efficiencies of up to (2.7 ± 0.3) × 10^−5. A key benefit of the device described here, which is based on photonic molecule modes, is the ability to use a static electro-optic bias to trim the transducer into resonance. However, we find the migration of free carriers in thin-film lithium niobate reduces the EO response of the device to static fields, making such trimming ineffective. This carrier migration is a key challenge for enabling the promise of low-power electro-optics provided by thin-film lithium niobate devices. I characterize the low-frequency electro-optic response, which suggests that conduction occurs on the etched surface of lithium niobate. I show how this conduction can be reduced – and low-frequency EO performance improved – by changing the electrode design and annealing the devices. Following this, I describe the design and initial characterization of an improved transducer device. Finally, I describe a scheme by which even relatively low-efficiency transducers could be used to generate remote entanglement using an optically heralding scheme. Demonstration of such a system appears possible with current devices, suggesting that small opticallymediated quantum networks of superconducting qubits may be feasible soon.
Efficient and stable microwave-optical transduction is a key enabling technology for distributed superconducting quantum computing and heterogeneous quantum networks. Electro-optic transducers based on thin-film lithium niobate (TFLN) have shown strong promise, but demonstrations to date have been limited by various factors such as low frequency bias drift, low efficiency, fabrication complexity, and scalability. Here we demonstrate the first integrated electro-optic microwave-optical transducers realized in thin-film lithium tantalate (TFLT), a material platform offering Pockels nonlinearity comparable to TFLN together with improved bias stability and high-power handling. We fabricate superconducting microwave resonators coupled to tunable photonic-molecule optical resonators using wafer-scale deep ultraviolet lithography, offering high-throughput production of hundreds of devices per wafer. Across six devices we observe coherent bidirectional conversion between C-band optical photons and 4.9-5.5 GHz microwave photons, with measured on-chip efficiencies and inferred single-photon coupling rates g_0/2π ~ 1 kHz consistent with theory. Continuous operation over multiple days is achieved using a static bias field with minimal feedback, demonstrating a major operational advantage. We further characterize optical loss statistics, microwave resonator performance, and optically induced added noise under pulsed pumping, finding less than one added photon for 100 microsecond pulses at the highest measured efficiencies. These results establish TFLT as a scalable and robust electro-optic platform for future quantum interconnects and modular quantum processors.
Abstract Superconducting cavity electro-optics presents a promising route to coherently convert microwave and optical photons and distribute quantum entanglement between superconducting circuits over long-distance. Strong Pockels nonlinearity and high-performance optical cavity are the prerequisites for high conversion efficiency. Thin-film lithium niobate (TFLN) offers these desired characteristics. Despite significant recent progresses, only unidirectional conversion with efficiencies on the order of 10 −5 has been realized. In this article, we demonstrate the bidirectional electro-optic conversion in TFLN-superconductor hybrid system, with conversion efficiency improved by more than three orders of magnitude. Our air-clad device architecture boosts the sustainable intracavity pump power at cryogenic temperatures by suppressing the prominent photorefractive effect that limits cryogenic performance of TFLN, and reaches an efficiency of 1.02% (internal efficiency of 15.2%). This work firmly establishes the TFLN-superconductor hybrid EO system as a highly competitive transduction platform for future quantum network applications.
Efficient, low-noise, and high-bandwidth transduction between optical and microwave photons is key to long-range quantum communication between distant superconducting quantum processors. Recent demonstrations of microwave-optical transduction using the broadband direct electro-optic (Pockels) effect in optical thin films made of AlN or LiNbO 3 have shown promise. To improve efficiency and added noise, materials with larger Pockels coefficients, such as the soft ferroelectrics BaTiO 3 or SrTiO 3 , are needed. However, these materials require adapted designs and fabrication approaches due to their nonlinear and, in some cases, hysteretic electro-optic response. Here, we engineer an on-chip, triply resonant transducer comprising low-loss BaTiO 3 -on- SiO 2 waveguides monolithically integrated with a superconducting microwave resonator made of Nb. We demonstrate bidirectional microwave-optical transduction and reach total off-chip efficiencies of 1 × 10 − 6 using pulsed pumping. The device design permits poling of the ferroelectric material without introducing excess microwave loss, exploiting superconducting air bridges fabricated using only subtractive patterning steps. In addition, we investigate optically induced heating, revealing fast thermalization and quasiparticle resilience of the microwave resonator. Our transducer concept and fabrication process are applicable to other materials with a large bias-induced Pockels effect like SrTiO 3 and pave the way for efficient, low-power quantum interconnects.
We present a resonant electro-optic transducer for efficient conversion between microwave and telecom wavelength photons. Our platform employs a bulk lithium niobate crystal whose large dielectric constant creates wavelength-scale confinement of microwave photons. By incorporating this crystal within a high-finesse Fabry - Perot optical cavity, microwave photons couple to optical photons through the electro-optic effect. We demonstrate the ability to tune our system into triply resonant operation, where microwave photons, optical pump photons, and upconverted optical photons are simultaneously resonant with high quality factor electromagnetic modes of the system. The device achieves photon number conversion efficiency at the percent level, comparable to state-of-the-art devices at room temperature -- sufficient to resolve the thermal occupation of the microwave mode -- while avoiding the noise and loss associated with metal electrodes. These results establish our all-dielectric devices as a promising platform for high-precision sensing of optically detected microwave fields and as a viable route toward single-photon-level microwave - optical quantum transduction.