As superconducting qubits scale toward large-scale quantum processors, conventional room-temperature (RT) control and readout architectures introduce interconnect bottlenecks that lead to high latency. To mitigate these issues, a cryogenic circuit architecture is adopted that co-integrates control and readout circuits with qubit chips within a cryo-environment. However, this approach is constrained by refrigerator limitations, which impose stringent requirements on area and power dissipation, while high-fidelity qubit operation necessitates high spectral purity. A 28 nm bulk-CMOS digital baseband ASIC is presented for qubit control and readout, integrating a pulse modulator capable of arbitrary-envelope modulation, a readout receiver with a state classifier for reflectometry-signal preprocessing, and on-chip state classification after offline training. Key techniques include (i) a multiplier-less CORDIC-based Direct Digital Synthesis (DDS) for high-precision pulse shaping, which replaces conventional LUT-based implementations and achieves a 29.2% higher speed and a 41.54% lower area compared to conventional LUT-based DDS, with SFDR > 54dB; (ii) a dynamic Region of Interest (ROI) based data cleansing method that classifies the qubit states from a small data subset, reducing memory requirements by 89% compared to conventional threshold classification approaches, while ensuring fidelity degradation is no more than 0.32% compared to the theoretical limit.
As superconducting qubits scale toward large-scale quantum processors, conventional room-temperature (RT) control and readout architectures introduce interconnect bottlenecks that lead to high latency. To mitigate these issues, a cryogenic circuit architecture is adopted that co-integrates control and readout circuits with qubit chips within a cryo-environment. However, this approach is constrained by refrigerator limitations, which impose stringent requirements on area and power dissipation, while high-fidelity qubit operation necessitates high spectral purity. A 28 nm bulk-CMOS digital baseband ASIC is presented for qubit control and readout, integrating a pulse modulator capable of arbitrary-envelope modulation, a readout receiver with a state classifier for reflectometry-signal preprocessing, and on-chip state classification after offline training. Key techniques include (i) a multiplier-less CORDIC-based Direct Digital Synthesis (DDS) for high-precision pulse shaping, which replaces conventional LUT-based implementations and achieves a 29.2% higher speed and a 41.54% lower area compared to conventional LUT-based DDS, with SFDR > 54dB; (ii) a dynamic Region of Interest (ROI) based data cleansing method that classifies the qubit states from a small data subset, reducing memory requirements by 89% compared to conventional threshold classification approaches, while ensuring fidelity degradation is no more than 0.32% compared to the theoretical limit.
In today's mainstream superconducting quantum computing platforms in a dilution refrigerator, the qubits work at a cryogenic temperature (CT) of a few tens of mK, while the qubit controller hardware works on plates with temperature ranging from a few K to room temperature (RT). The highly-integrated cryo-CMOS qubit controller ASIC that can fully work at 3-4K has been proven to be the most feasible way to scale down the quantum computing system [1–5]. In [1], a pulse modulator is implemented with a limited qubit driving capability, which can only generate fixed length symmetric driving pulse. The controllers in [2], [3] generated the RF driving pulse with a frequency division multiplexing (FDM) mode, with the power dissipation of 192mW/qubit and 46.5mW/qubit, respectively. In [4], a local oscillator (LO) was included to improve the controller integration level, and the chip power consumption was 24.1mW/qubit. An arbitrary waveform generation (AWG) functionality digital design was presented in [5] with a power consumption of 23.1mW/qubit. Nevertheless, with continuously increasing number of qubits to integrate, it remains as one of the major tasks to further reduce the power consumption and size of controller.
In this paper, we provide a system level perspective on the design of control electronics for large scale quantum systems. Quantum computing systems with high-fidelity control and readout, coherent coupling, calibrated gates, and reconfigurable circuits with low error rates are expected to have superior quantum volumes. Cryogenic CMOS plays a crucial role in the realization of scalable quantum computers, by minimizing the feature size, lowering the cost, power consumption, and implementing low latency error correction. Our approach toward achieving scalable feed-back based control systems includes the design of memory based arbitrary waveform generators (AWG’s), wide band radio frequency analog to digital converters, integrated amplifier chain, and state discriminators that can be synchronized with gate sequences. Digitally assisted designs, when implemented in an advanced CMOS node such as 7 nm can reap the benefits of low power due to scaling. A qubit readout chain demands several amplification stages before the digitizer. We propose the co-integration of our in-house developed InP HEMT LNAs with CMOS LNA stages to achieve the required gain at the digitizer input with minimal area. Our approach using high impedance matching between the HEMT LNA and the cryogenic CMOS receiver can relax the design constraints of an inverter-based CMOS LNA, paving the way toward a fully integrated qubit readout chain. The qubit state discriminator consists of a digital signal processor that computes the qubit state from the digitizer output and a pre-determined threshold. The proposed system realizes feedback-based optimal control for error mitigation and reduction of the required data rate through the serial interface to room temperature electronics.
Superconducting qubits are pivotal in advancing quantum computing, poised for scale but limited by the complexity and fidelity of their control and readout systems, relying on RF and signal processing infrastructure. This survey serves as a comprehensive and technically grounded review of control and readout architectures tailored for superconducting qubits. Synthesizing insights from device physics, circuit design, microwave engineering, signal processing, and cryogenic integration, this work details the practicalities of RF pulse generation, signal synthesis, and readout signal analysis for quantum systems. it covers key requirements, parameters, and pulse engineering techniques, including commonly used envelopes like Gaussian and DRAG designs. Moving to the system level, this survey systematically classifies and critically analyses current architectural strategies (covering key areas like frequency conversion, waveform management, and system infrastructure) and technology platforms (including adaptive classical control stacks, cryogenic CMOS circuits, and novel interconnects and interfaces), evaluating their trade-offs in performance. Extensive literature analysis identifies prevailing limitations such as wiring complexity, thermal budget constraints, latency, and power consumption, while highlighting underexplored opportunities for on-chip signal processing and novel interconnects, drawing analogies to advanced communication systems design. By consolidating diverse control paradigms and critically evaluating their trade-offs, this survey provides a unified foundation for designing next-generation quantum control stacks. Finally, a forward-looking roadmap outlines key trends in monolithic integration, cryo-compatible digital architectures, and physics-informed hardware co-design, offering both a retrospective synthesis and a prospective vision for quantum hardware engineering beyond the NISQ era.
This article presents a fully integrated Cryo-CMOS system on chip (SoC) for quantum computing. The proposed SoC integrates a radio frequency (RF) pulse modulator for qubit state manipulation, a multi-tone signal generator and a coherent receiver for qubit state readout, and 22 DACs for high-speed voltage pulsing of qubit gates. By adopting frequency division multiplexing and direct digital synthesis (DDS), the RF pulse modulator can control up to 16 qubits over a single RF line, and the readout receiver can detect the state of up to six qubits simultaneously. The proposed SoC also integrates a microcontroller for low latency on-chip signal processing and increased flexibility in implementing quantum instruction sets. A detailed analysis of qubit-state readout fidelity and the impact of finite DAC resolution on two-qubit gate fidelity is also included in this article, together with an electrical specification summary. The SoC is implemented in Intel’s 22 nm FFL fin field-effect transistor (FinFET) process, and it is characterized both at room and 4 K temperatures. The performance of each specific block is measured, with the readout characterized in a loop-back configuration. Generation of the control signals required for a full Rabi oscillation experiment is also demonstrated. This article also describes the cryogenic thermalization techniques used to integrate the SoC in the dilution refrigerator and shows temperature measurements during operation.
Building a large-scale quantum computer requires the co-optimization of both the quantum bits (qubits) and their control electronics. By operating the CMOS control circuits at cryogenic temperatures (cryo-CMOS), and hence in close proximity to the cryogenic solid-state qubits, a compact quantum-computing system can be achieved, thus promising scalability to the large number of qubits required in a practical application. This work presents a cryo-CMOS microwave signal generator for frequency-multiplexed control of 4 × 32 qubits (32 qubits per RF output). A digitally intensive architecture offering full programmability of phase, amplitude, and frequency of the output microwave pulses and a wideband RF front end operating from 2 to 20 GHz allow targeting both spin qubits and transmons. The controller comprises a qubit-phase-tracking direct digital synthesis (DDS) back end for coherent qubit control and a single-sideband (SSB) RF front end optimized for minimum leakage between the qubit channels. Fabricated in Intel 22-nm FinFET technology, it achieves a 48-dB SNR and 45-dB spurious-free dynamic range (SFDR) in a 1-GHz data bandwidth when operating at 3 K, thus enabling high-fidelity qubit control. By exploiting the on-chip 4096-instruction memory, the capability to translate quantum algorithms to microwave signals has been demonstrated by coherently controlling a spin qubit at both 14 and 18 GHz.
Cryogenic CMOS (Cryo-CMOS) ASICs have drawn increasing attention with great potential in scaling down the quantum computing (QC) platform. Recently, several cryoCMOS ASICs have been presented in the literature, including the qubit state readout ASICs [1–4] and state controller ASICs [5–8]. For readout ASICs, the quadrature down conversion architecture is widely adopted, with the power consumption ranging from 20mW [1] to 75mW [2]. Also, significant progress has been made in reducing the power consumption of qubit controllers. The controller in [5] consumes a power of <4 mW/qubit under active control, when controlling a superconducting quantum computing unit cell. Nevertheless, it remains a long-term goal to reduce the power consumption and promote the integration level of readout/controller ASICs, in consideration of the increasing requirement on qubit number and the limited cooling power provided by the dilution refrigerator.