arXiv:2211.02081 · IEEE Workshop on Low Temperature Electronics (WOLTE)
A system design approach toward integrated cryogenic quantum control systems
Mridula Prathapan, Peter R. Müeller, David Heim, Maria Vittoria Oropallo, Matthias Brändli, Pier Andrea Francese, Marcel Kossel, Andrea Ruffino, Cezar B. Zota, Eunjung Cha, Thomas Morf
In this paper, we provide a system level perspective on the design of control electronics for large scale quantum systems. Quantum computing systems with high-fidelity control and readout, coherent coupling, calibrated gates, and reconfigurable circuits with low error rates are expected to have superior quantum volumes. Cryogenic CMOS plays a crucial role in the realization of scalable quantum computers, by minimizing the feature size, lowering the cost, power consumption, and implementing low latency error correction. Our approach toward achieving scalable feed-back based control systems includes the design of memory based arbitrary waveform generators (AWG’s), wide band radio frequency analog to digital converters, integrated amplifier chain, and state discriminators that can be synchronized with gate sequences. Digitally assisted designs, when implemented in an advanced CMOS node such as 7 nm can reap the benefits of low power due to scaling. A qubit readout chain demands several amplification stages before the digitizer. We propose the co-integration of our in-house developed InP HEMT LNAs with CMOS LNA stages to achieve the required gain at the digitizer input with minimal area. Our approach using high impedance matching between the HEMT LNA and the cryogenic CMOS receiver can relax the design constraints of an inverter-based CMOS LNA, paving the way toward a fully integrated qubit readout chain. The qubit state discriminator consists of a digital signal processor that computes the qubit state from the digitizer output and a pre-determined threshold. The proposed system realizes feedback-based optimal control for error mitigation and reduction of the required data rate through the serial interface to room temperature electronics.
In this paper, we provide a system level perspective on the design of control electronics for large scale quantum systems. Quantum computing systems with high-fidelity control and readout, coherent coupling, calibrated gates, and reconfigurable circuits with low error rates are expected to have superior quantum volumes. Cryogenic CMOS plays a crucial role in the realization of scalable quantum computers, by minimizing the feature size, lowering the cost, power consumption, and implementing low latency error correction. Our approach toward achieving scalable feed-back based control systems includes the design of memory based arbitrary waveform generators (AWG’s), wide band radio frequency analog to digital converters, integrated amplifier chain, and state discriminators that can be synchronized with gate sequences. Digitally assisted designs, when implemented in an advanced CMOS node such as 7 nm can reap the benefits of low power due to scaling. A qubit readout chain demands several amplification stages before the digitizer. We propose the co-integration of our in-house developed InP HEMT LNAs with CMOS LNA stages to achieve the required gain at the digitizer input with minimal area. Our approach using high impedance matching between the HEMT LNA and the cryogenic CMOS receiver can relax the design constraints of an inverter-based CMOS LNA, paving the way toward a fully integrated qubit readout chain. The qubit state discriminator consists of a digital signal processor that computes the qubit state from the digitizer output and a pre-determined threshold. The proposed system realizes feedback-based optimal control for error mitigation and reduction of the required data rate through the serial interface to room temperature electronics.
Today’s quantum computing systems rely on commercial electronics operating at room temperature in order to perform control and readout operations for qubits [1] –[6]. The qubits operate at cryogenic temperatures; the signals that support control and readout of qubits therefore traverse multiple temperature stages in a dilution refrigerator to enable interaction with the qubits of a quantum computer. For many of the most advanced quantum computers built to date, the control of each individual qubit demands application of a radiofrequency pulse that is precisely calibrated in frequency, amplitude, and phase. Oubit readout demands the amplification of very low amplitude signals that are then post-processed to categorize the state of the qubit being measured. Oubit control electronics are implemented using arbitrary waveform generators (AWGs) of various types. The scalability of such systems is challenged by the need to scale the number of qubit control electronics units linearly with the number of qubits in the system. One approach to mitigating this challenge that is under active exploration is the use of multi-channel AWGs (tailored to the requirements of qubit control) that operate at the 4K stage of a quantum computing system [7] –[10]. Oubit readout electronics are typically implemented using multiple stages of amplification and then DSP-based readout performed at room temperature. In today’s systems, while readout electronics benefits from multiplexing of the readout signals (enabling a single cascade of moderately wideband amplifiers to support the delivery of multiple readout signals to the room-temperature electronics), again, the scalability of this approach is challenged much as is the case with control electronics. One approach to mitigating the readout challenge is the expanded use of cryogenic electronics in the readout chain. Success in the implementation of cryogenic control and readout solutions depends critically on multiple CMOS sub-components; in this paper we focus on SRAM and low noise amplifiers (LNAs). Note that SRAM is critical for both control and readout applications as a mixed-signal solution involving the combination of a custom processor and analog elements is highly desirable in both cases. Further, while the LNA is directly used as an element in the readout chain, a deep assessment of LNA performance and opportunities strongly benefits overall understanding of achievable noise performance in CMOS technologies at cryogenic temperatures and is therefore impoitant in both control and readout contexts.
Quantum computing promises to revolutionize our lives, achieving unprecedented computational powers and unlocking new possibilities in drug discovery, chemical simulations and cryptography. The fundamental unit of computation of a quantum computer is the quantum bit (qubit). It can be implemented in a number of technologies, such as superconducting qubits, spin qubits, photonic systems, trapped ions and NV-centers. Solid-state superconducting qubits and spin qubits seem to be the most promising ones, as shown by the recent demonstration of quantum supremacy with a superconducting qubit processor. Such quantum processors, to operate in the quantum regime, require very low temperatures around 10 mK, and they are hence kept inside dilution fridges. The electronics required to read out and control such processors is typically realized by discrete components or bulky scientific instruments at room temperature wired into the dilution fridge. Such approach is only feasible until few (< 100) qubits are handled, but it is not scalable for million-qubit processors required for fault-tolerant operation. In this thesis, readout and control electronics is proposed to be integrated and operated directly at cryogenic temperatures, in close proximity with the qubits and potentially even co-integrated. CMOS technology is advocated for its scalability, compactness and low prototyping cost, to create a comprehensive cryo-CMOS class of fully-integrated transceivers to read out and control solid-state qubits. In particular, the thesis focuses on cryo-CMOS radio-frequency integrated circuits for the readout of silicon quantum computers, looking to integrate the whole readout system, from the quantum layer to the room temperature user interface. Cryogenic CMOS devices are explored first, to lay the foundations of integrated circuit design. The realization of quantum dots in standard CMOS technology is explored as a platform to realize solid-state qubit arrays, demonstrating functionality at 50 mK and good reproducibility. Moreover, the operation of integrated transistors at 50 mK and 4.2 K is explored to understand their basic cryogenic functionality, through characterization and modeling. Then also integrated passives, such as capacitors, inductors and transformers, are studied and modeled at cryogenic temperatures. Then, a fully-integrated readout platform spanning across all the blocks needed for dispersive readout is proposed. A fully-integrated matrix of quantum dots with radio-frequency gate-based readout capabilities is demonstrated along with time- and frequency-multiplexing. This quantum-classical circuit shows all the features for a scalable approach and is the core of the platform following it. A cryogenic CMOS circulator based on a new all-pass filter architecture is demonstrated, to be used as integrated replacement for current bulky counterparts; it allows power reduction, insertion loss and bandwidth enhancement with respect to state-of-the-art integrated circulators. The rest of the front-end is also explored with dedicated test multiplexers, a low noise-amplifier and an oscillator, that are finally merged in a single fully-integrated low-noise receiver with frequency synthesizer operating at 3.5 K for scalable multiplexed readout of silicon qubits. The platform presented in this thesis, across temperature boundaries, carries all the features required for future scalable silicon quantum computing platforms and could therefore form their core.
Quantum computing promises an exponential speed-up of computation compared to what is nowadays achievable with classical computers. In this way, it enables the evaluation of more complex models and the breaching of current security algorithms. For the operation of a quantum system, many questions remain to be answered. Currently, there are several quantum technologies that promise to be both reliable and scalable, two features required for large scale quantum operations. Common to all technologies is the operating temperature that needs to be close to absolute zero, i.e. below 100 mK, to suppress environment noise and allow the quantum properties to become 'visible'. In order for any quantum processor to be operated, a so-called quantum-classical interface is required for the quantum bit (qubit) read-out and control. This interface consists of various electronic blocks, such as analog-to-digital converters, digital-to-analog converters, mixers, amplifiers and a digital controller. Especially the analog blocks require effort to meet the noise and stability constraints as not to disturb the very sensitive qubits and allow reading of the tiny signals. As the qubits live in extremely deep-cryogenic temperatures, long wires interface the cryogenic with the room temperature environment, where most of the electronics is situated. However, for a scalable system, heat injection becomes a serious problem, with many wires between 300 K and sub-Kelvin. Furthermore, such amount of interconnects is challenging to mechanically place in a dilution refrigerator. Therefore, in this work, we propose to implement the electronics not at room temperature, but at a temperature much closer to the qubits, for example at 4 K. This not only reduces significantly the wiring between room temperature and the qubits, but we can also benefit from lower electronic noise at such a temperature. The operation of conventional electronics almost 200°C below its normal temperature range is not trivial as device properties alter significantly and most circuits no longer operate as intended. In CMOS processes, the main technology in the integrated electronics world, the behaviour of the transistors, required for the implementation of any circuit, deviates considerably at low temperatures. The transistor's threshold voltage goes up, the mobility increases and the subthreshold slope becomes steeper, to name just a few of these deviations. Although there are improvements in performance, there are also some counter effects, and characterization of the transistors is needed to observe the changes. Once devices are characterized at such low temperatures, new models can be built and circuits can be simulated and adapted to operate properly at cryogenic temperatures. Luckily, there are various commercially available devices that can already withstand the chills of cold. We demonstrated various commercially available devices, such as a field-programmable gate array (FPGA) implemented in a 28 nm CMOS process, to be operating without major concerns at 4~K. Its properties alter only slightly, within 5 to 10%, and all tested circuit implementations, working at 300~K, also worked at 4 K. We combined both commercially available devices, that operate 200 K below their specified temperature range, with custom designed CMOS circuits to implement a cryogenic read-out platform for spin qubits. This system comprises amplifiers, an ADC, an FPGA, voltage regulators and a clock generator. It allows to amplify the tiny signal from the qubits and digitize it directly in the FPGA in order to process the data locally at 4~K. This system is one of the first systematic attempts at operating a part of the quantum-classical interface at cryogenic temperatures and forms the basis for future systems comprising the complete electronic interface for qubits to operate at such low temperatures. One of the main problems to tackle for cryogenic electronic systems is their power consumption. Power budgets are simply limited to roughly 1 or 2 Watts at 4 K and exponentially lower at deeper cryogenic temperatures, thus limiting the size of large-scale electronic systems. Our approach of combined commercial and custom circuits will have to be steadily replaced by a single (custom) technology that meets both power and scalability constraints. One of the best candidates is CMOS, a technology that the industry has relied upon for several decades and benefits from many optimizations thanks to Moore's law.
Cryogenic CMOS control and readout circuits tightly interfaced with the qubits have emerged as a promising solution for future quantum computers with tens-of-thousands to millions of qubits [1] –[5]. A lownoise cryo-CMOS receiver at 3−4K integrated tightly with the lowcryogenic quantum processor can relax or even potentially eliminated the need for the HEMT LNA, and keep the whole control loop at cryogenic temperature, hence avoiding any high-speed interconnects to room temperature (Fig. 1). Additionally, wide bandwidths in the receiver enables qubit-multiplexing, where qubits can be frequency multiplexed with a spacing of 10MHz−40MHz, allowing anywhere from 10’s-100’s of qubits to be packed in to a single readout line with gigahertz-scale bandwidths. A second critical metric is power consumption, since the cooling power available in a typical dilution refrigerator is limited to a few watts at 3−4K. Therefore, the control and readout circuits should be designed with low power consumption, projected to be <1mW per qubit (Fig. 1). While there has been initial progress in the design of cryo-CMOS readout systems, a leap forward is required in their overall power consumption to be viable for future quantum systems. In this work, we showcase the design and implementation of the first sub-mWper-qubit cryo-CMOS RX - a wideband, I/Q-downconversion, 4K receiver for qubit readout that achieves >1.9GHz of IF bandwidth with >50dB conversion gain and 0.7dB NF while consuming only 17mW of power consumption, thanks to various design techniques including near-threshold operation and low-1/f-noise passive mixers, representing 3−5× lower power consumption than prior works [2]–[3] while achieving similar noise, BW and gain performance. In addition, we demonstrate a real-time qubit read-out measurement by integrating our cryogenic-CMOS receiver with a transmon qubit.
This paper presents a comprehensive cryogenic analog signal processing architecture designed for superconducting qubit control and quantum state readout operating at 4 Kelvin. The proposed system implements a complete bidirectional signal path bridging room-temperature digital controllers with quantum processors at millikelvin stages. The control path incorporates a Phase-Locked Loop (PLL) for stable local oscillator generation, In-phase/Quadrature (I/Q) modulation for precise qubit gate operations, and a cryogenic power amplifier for signal conditioning. The readout path features a Low Noise Amplifier (LNA) with 14 dB gain and 8-Phase Shift Keying (8-PSK) demodulation for quantum state discrimination. All circuit blocks are designed and validated through SPICE simulations employing cryogenic MOSFET models at 180nm that account for carrier freeze-out, threshold voltage elevation, and enhanced mobility at 4 K. Simulation results demonstrate successful end-to-end signal integrity with I/Q phase error below 2°, image rejection ratio exceeding 35~dB, and symbol error rate below 10−6. This work provides a modular, simulation-validated framework for scalable cryogenic quantum control systems.
This article will review recent progress in cryogenic CMOS designs for future scaled quantum computing applications. After introducing the scaling challenges associated with qubit control and readout electronics operating at room temperature, approaches taken to date to cryogenic control electronics design will be discussed, focusing on the most recent relevant publications. Elements of ultra-low power circuit and system design approaches for cryogenic controllers in scaled CMOS nodes (40nm to 14nm) will be reviewed, including a discussion of current state-of-the art cryogenic controller performance and power efficiency. Note that leading designs, when operated as transmon qubit state controllers, have achieved gate error rates in the range of 10-4 to 10-3 achieving spurious free dynamic range (SFDR) of ~40dB while consuming 4-23mW of power per qubit under active control, with power efficiency strongly driven by the complexity of the digital processor integrated in the controller design. These demonstrations, while significant, are just the first steps toward achieving the performance, efficiency, and scalability that will be required for future systems. This review article will discuss fundamental tradeoffs in CMOS cryogenic designs in order to address the needs of future scaled quantum computing systems.