Even though the physical equations that model chemical systems are known, the complexity of solving, and sometimes even representing such equations, escalates exponentially with the system size for an arbitrary chemical system. However, many different approximations can be made and efficient algorithms found for the accurate description of some chemical systems of interest with reasonable computational effort. In this work, we propose efficient algorithms for the solution of three problems of chemical interest, namely: the electronic structure problem using quantum computers, the simulation of chemical reactions on metallic surfaces, and modelling the absorption of solar radiation by light harvesting molecules. All of the proposed algorithms work within larger frameworks. We start by discussing the importance of each given problem, after which we cover the necessary background for all the used frameworks and show the details on how our proposed algorithms make these frameworks more efficient.
Even though the physical equations that model chemical systems are known, the complexity of solving, and sometimes even representing such equations, escalates exponentially with the system size for an arbitrary chemical system. However, many different approximations can be made and efficient algorithms found for the accurate description of some chemical systems of interest with reasonable computational effort. In this work, we propose efficient algorithms for the solution of three problems of chemical interest, namely: the electronic structure problem using quantum computers, the simulation of chemical reactions on metallic surfaces, and modelling the absorption of solar radiation by light harvesting molecules. All of the proposed algorithms work within larger frameworks. We start by discussing the importance of each given problem, after which we cover the necessary background for all the used frameworks and show the details on how our proposed algorithms make these frameworks more efficient.
The computational cost of exact methods for quantum simulation using classical computers grows exponentially with system size. As a consequence, these techniques can be applied only to small systems. By contrast, we demonstrate that quantum computers could exactly simulate chemical reactions in polynomial time. Our algorithm uses the split-operator approach and explicitly simulates all electron-nuclear and interelectronic interactions in quadratic time. Surprisingly, this treatment is not only more accurate than the Born-Oppenheimer approximation but faster and more efficient as well, for all reactions with more than about four atoms. This is the case even though the entire electronic wave function is propagated on a grid with appropriately short time steps. Although the preparation and measurement of arbitrary states on a quantum computer is inefficient, here we demonstrate how to prepare states of chemical interest efficiently. We also show how to efficiently obtain chemically relevant observables, such as state-to-state transition probabilities and thermal reaction rates. Quantum computers using these techniques could outperform current classical computers with 100 qubits.
In ab-initio quantum chemistry, solving the electronic structure problem of a molecular system of interest to obtain an approximation of the ground and, in some cases, the excited state energies is a core and central task in various quantum chemistry processes. These include, but certainly not limited to, the calculation of the activation energy–that is the minimal energy required to launch a given chemical reaction–, the dipole and multipole moments which describe the polarity of the molecule, performing the optimization of the geometry of the molecule and searching for transition states. Furthermore, many quantum chemistry applications are predicated, not merely on the approximation of the ground state energy, but also on the corresponding first order derivatives. The body of literature of classical algorithms approximating the ground state energy and its first order derivative is extensively rich with a plethora of methods such as self-consistent mean-field methods, coupled-cluster methods, density matrix renormalization group and many more, each of which has intrinsic set of properties and characteristics that makes it suitable for specific tasks and cases. However, classical methods face a practically insurmountable challenge: the efficient computation of high accuracy approximation of ground state energies of large system sizes. This is fundamentally because the electronic structure problem provably belongs to the complexity class of QMA-hard problems. Which also means that it is out of reach for quantum algorithms as well in general. However, with certain assumptions that are expected to hold molecules of interest–that so far proved to be classically challenging because the required accuracy set by the standard of chemical accuracy threshold (generally held in quantum chemistry)– quantum algorithms can efficiently treat such cases. While originally theorized by Richard Feynmann as a potentially efficient way of simulating some classically intractable many-body systems, quantum computing has since proven to have a stronger and richer potential paving the way for the inception of new algorithms such as Shor’s algorithm for integer factorization, HHL for solving linear system of equation and Grover’s algorithm for constrained binary search, just to name a few. These algorithms provably exhibit an improvement rate that goes respectively exponentially and quadratically in the time complexity. Quantum chemistry is considered a prominent candidate to benefit from quantum computing given the variety of quantum algorithms put forth to solve the electronic structure problem of particular systems of interest. These quantum algorithm proposals can be broadly categorized in three main categories that span the spectrum: from noisy intermediate scale quantum (NISQ) computers to early and full scale fault tolerant quantum ((E)FTQC) computers. Firstly, the variational quantum eigensolver (VQE) family of quantum algorithms which variationally search for the ground state energy through the optimization of the energy of a parametrized state prepared in a quantum computer using an ansatz. Secondly, the quantum Krylov subspace diagonalization (QKSD) methods, which generate a subspace of the original Hilbert space and efficiently produce the lowest energy in said subspace as its output. Lastly, we have the quantum phase estimation (QPE) algorithms, which provably produce the ground state energy in Heisenberg scaling presenting hence a provable efficient solution. In this thesis, we firstly set to work on the problem of efficient Hamiltonian linear combination of unitaries (LCU) representation. This is mainly motivated by the wide-range impact an efficient compression of the Hamiltonian can potentially have on several quantum algorithms such as VQE, QPE...etc. We designed a method that efficiently compress the Hamiltonian representation in a way that is beneficially impactful across the set of the aforementioned quantum algorithms. Namely, we motivate and present in Sections 1.3 and 1.4 respectively, the regularized compressed double-factorization (RC-DF) and show how it reduces the energy measurement complexity both in terms of number of distinct observables and number of samples. Moreover, it also reduces the total depth of the quantum phase estimation circuit thanks to its low normalization factor. Secondly, given the importance of the energy derivatives, in Sections 2.1 and 2.2, we introduce and present an efficient quantum algorithm for the calculation of the analytic gradient of VQE energies of double-factorized Hamiltonians. Furthermore, in Section 2.1, we expand on the utility of RC-DF by presenting a quantum algorithm that determines the analytic gradient of energies measured with respect to RC-DF Hamiltonains. Third, in Section 3.1, we summarize the theoretical results of purification error-mitigation techniques, namely echo verification and virtual distillation. In Section 3.2, we report on the results of the experimental bench mark, of said techniques, performed on on Google’s Sycamore device to validate the theoretical scaling of error suppression and extrapolate the resources needed for classically intractable system sizes. Fourth, in Section 4 we establish the challenges of computing energy gradients in a quantum Krylov frame work. To overcome the problem, we provide, in Section 4.3, an efficient quantum algorithm for calculating energy derivative obtained through QKSD procedures. Our approach shows how the QKSD ground state can be prepared using quantum signal processing (QSP) and reduces the number of observables to O(1) per reduced density matrix (RDM). Lastly, in light of the importance of quantum RAMs due to their utility in a variety of quantum algorithms that require efficient initial state preparation, as explained in Section 5.5, we address the problematic exponential depth of the bucket-brigade QRAM (when decomposed). We present in Section 5.6 a very efficient Clifford+T decomposition of the bucket-brigade QRAM, which preserves the linear scaling of the depth of the circuit without introducing any additional ancilla.
Simulations of chemical dynamics are a powerful means for understanding chemistry. However, classical computers struggle to simulate many chemical processes, especially non-adiabatic ones, where the Born-Oppenheimer approximation breaks down. Quantum computers could simulate quantum-chemical dynamics more efficiently than classical computers, but there is currently no complete quantum algorithm for calculating dynamical observables to within a known error. Here, we develop an efficient, end-to-end quantum algorithm for simulating chemical dynamics that avoids all uncontrolled approximations (including the Born-Oppenheimer approximation) and whose error is bounded subject to mild assumptions. To do so, we treat the nuclei and the electrons on an equal footing and simulate the full molecular wavefunction on a momentum-space grid in first quantization, including all algorithmic steps: initial-state preparation, time evolution using qubitization, and measurement of chemical observables such as reaction yields and rates. Our work gives the first algorithm for quantum simulation of chemistry whose end-to-end complexity achieves sublinear scaling in the size of the grid. We achieve this by developing an exponentially faster method for initial-state-preparation. Photochemistry is a likely early application of our algorithm and we estimate resources required for end-to-end simulations of non-adiabatic dynamics of atmospherically important molecules. Classically intractable photochemical computations could be performed using resources comparable to those required for other chemical applications of quantum computing.
Quantum computers could potentially simulate the dynamics of systems such as polyatomic molecules on a much larger scale than classical computers. One of the central unresolved problems in developing quantum simulation algorithms has been constructing the necessary time evolution operators in enough detail for implementation in a quantum computer. This work presents a complete and very general solution to this problem: namely, a quantum computational algorithm for simulating an arbitrary Coulombic many-body system acting under the three-dimensional Schrödinger equation. We use the simplest discretized model and discuss detailed constructions of the operators involved. The algorithm is also implemented in MAT-LAB and tested against both analytical solutions and classical methods. Our algorithm can determine an arbitrary system’s dynamics rather than merely associated constants, as investigated in previous literature. It can hence be adapted for electronic structure calculations, chemical reaction simulations, etc. 1
Determining properties of molecules and materials is one of the premier applications of quantum computing. A major question in the thesis is: how might we use long- and near-term quantum computers to solve problems of chemical interest? First, we give an overview of the standard model in electronic structure theory. Electronic structure methods have been improved significantly in the last decades; however, it is still a non-trivial task to fit experimental results for complex molecular systems. Second, we introduce quantum computation and quantum algorithms as an alternative device to solve the electronic structure problem. In the remaining part of the thesis, we describe the research projects. The thesis covers two (rather different) research directions: software and hardware projects. For the software part, we contribute with two new algorithms: Phase-Estimation Interval Target Energy Readout (PHILTER) and Recursive Variational Series Estimation (RVSE), where both are designed to be run on a quantum digital computer and extract materials and molecular properties. The PHILTER algorithm is a modification of the Quantum Phase Estimation and is designed to compute excited state energies within a target energy-interval for cases where good approximations for the states in the target energy-interval are either unknown or hard to prepare. For the RVSE algorithm, we pose the question: how might we use imperfect near-term quantum computers to solve problems of practical value? In this work, we introduce a method to compute expectation values of general functions of a Hamiltonian with respect to an input state using low depth quantum circuits suitable for noisy intermediate-scale quantum computers. For the hardware part, we propose a new chemical quantum computer by using molecular electronics as a basis for quantum computing. In this work, we pose the question: can scattering of electrons in molecules produce quantum gates? We construct one-qubit gates using one-electron scattering in molecules, and two-qubit controlled-phase gates using electron-electron scattering along metallic leads. We show initial applications of the framework by illustrating one-qubit gates using the molecular electronic structure of molecular hydrogen as a baseline model.
Quantum computers were first proposed to perform simulation -- in particular, quantum simulation. The premise is that such computers can simulate quantum dynamics exponentially faster than a classical computer. Some of the early proposals of practical applications of quantum computers come from quantum chemistry. Algorithms for more general systems, described by ordinary and partial differential equations, emerged later on. This thesis grounds on an extensive amount of prior research and proposes a set of improvements as well as new algorithms or algorithmic tools, focusing on applications from quantum chemistry and differential equations.First, we propose a technique relating to finding ground-states for electronic systems via the variational quantum eigensolver. The presented method enables solving the problem on early quantum hardware by a partitioning of the computational problem into smaller problems, using only classical resources to perform the partitioning. Next, the thesis considers simulation problems from chemistry in a more general sense. Following the idea that dynamical simulation of many chemical systems is efficient, whereas preparing ground-states is a `hard' problem, our computational framework leverages simulation routines to prepare molecular states as an input to a computation, relying only on `hard' input states for small problem instances. The preparation relies on dynamical scattering of initial fragments supported by a trap potential, allowing to estimate the success probability for certain bonds. A weak measurement scheme enables preparation of molecular states. Furthermore, this dissertation investigates quantum algorithms for differential equations. More specifically, the the Carleman linearization approach is considered to solve nonlinear differential equations. This entails bounding the Carleman truncation error, re-scaling of the solution to avoid an exponentially vanishing success probability, and discussing higher-order discretization. Moreover, this thesis introduced a penalty-based method to enforce constraints on the solution of differential equations, with inspiration from complex absorbing potentials and the quantum Zeno effect. We bound the approximation errors and embed the penalty method into an efficient quantum algorithm, with computational overhead only logarithmic in the penalty's strength. Efficiency is enabled by an interaction-picture approach with fast-forwardable constraint projections.