In ab-initio quantum chemistry, solving the electronic structure problem of a molecular system of interest to obtain an approximation of the ground and, in some cases, the excited state energies is a core and central task in various quantum chemistry processes. These include, but certainly not limited to, the calculation of the activation energy–that is the minimal energy required to launch a given chemical reaction–, the dipole and multipole moments which describe the polarity of the molecule, performing the optimization of the geometry of the molecule and searching for transition states. Furthermore, many quantum chemistry applications are predicated, not merely on the approximation of the ground state energy, but also on the corresponding first order derivatives. The body of literature of classical algorithms approximating the ground state energy and its first order derivative is extensively rich with a plethora of methods such as self-consistent mean-field methods, coupled-cluster methods, density matrix renormalization group and many more, each of which has intrinsic set of properties and characteristics that makes it suitable for specific tasks and cases. However, classical methods face a practically insurmountable challenge: the efficient computation of high accuracy approximation of ground state energies of large system sizes. This is fundamentally because the electronic structure problem provably belongs to the complexity class of QMA-hard problems. Which also means that it is out of reach for quantum algorithms as well in general. However, with certain assumptions that are expected to hold molecules of interest–that so far proved to be classically challenging because the required accuracy set by the standard of chemical accuracy threshold (generally held in quantum chemistry)– quantum algorithms can efficiently treat such cases. While originally theorized by Richard Feynmann as a potentially efficient way of simulating some classically intractable many-body systems, quantum computing has since proven to have a stronger and richer potential paving the way for the inception of new algorithms such as Shor’s algorithm for integer factorization, HHL for solving linear system of equation and Grover’s algorithm for constrained binary search, just to name a few. These algorithms provably exhibit an improvement rate that goes respectively exponentially and quadratically in the time complexity. Quantum chemistry is considered a prominent candidate to benefit from quantum computing given the variety of quantum algorithms put forth to solve the electronic structure problem of particular systems of interest. These quantum algorithm proposals can be broadly categorized in three main categories that span the spectrum: from noisy intermediate scale quantum (NISQ) computers to early and full scale fault tolerant quantum ((E)FTQC) computers. Firstly, the variational quantum eigensolver (VQE) family of quantum algorithms which variationally search for the ground state energy through the optimization of the energy of a parametrized state prepared in a quantum computer using an ansatz. Secondly, the quantum Krylov subspace diagonalization (QKSD) methods, which generate a subspace of the original Hilbert space and efficiently produce the lowest energy in said subspace as its output. Lastly, we have the quantum phase estimation (QPE) algorithms, which provably produce the ground state energy in Heisenberg scaling presenting hence a provable efficient solution. In this thesis, we firstly set to work on the problem of efficient Hamiltonian linear combination of unitaries (LCU) representation. This is mainly motivated by the wide-range impact an efficient compression of the Hamiltonian can potentially have on several quantum algorithms such as VQE, QPE...etc. We designed a method that efficiently compress the Hamiltonian representation in a way that is beneficially impactful across the set of the aforementioned quantum algorithms. Namely, we motivate and present in Sections 1.3 and 1.4 respectively, the regularized compressed double-factorization (RC-DF) and show how it reduces the energy measurement complexity both in terms of number of distinct observables and number of samples. Moreover, it also reduces the total depth of the quantum phase estimation circuit thanks to its low normalization factor. Secondly, given the importance of the energy derivatives, in Sections 2.1 and 2.2, we introduce and present an efficient quantum algorithm for the calculation of the analytic gradient of VQE energies of double-factorized Hamiltonians. Furthermore, in Section 2.1, we expand on the utility of RC-DF by presenting a quantum algorithm that determines the analytic gradient of energies measured with respect to RC-DF Hamiltonains. Third, in Section 3.1, we summarize the theoretical results of purification error-mitigation techniques, namely echo verification and virtual distillation. In Section 3.2, we report on the results of the experimental bench mark, of said techniques, performed on on Google’s Sycamore device to validate the theoretical scaling of error suppression and extrapolate the resources needed for classically intractable system sizes. Fourth, in Section 4 we establish the challenges of computing energy gradients in a quantum Krylov frame work. To overcome the problem, we provide, in Section 4.3, an efficient quantum algorithm for calculating energy derivative obtained through QKSD procedures. Our approach shows how the QKSD ground state can be prepared using quantum signal processing (QSP) and reduces the number of observables to O(1) per reduced density matrix (RDM). Lastly, in light of the importance of quantum RAMs due to their utility in a variety of quantum algorithms that require efficient initial state preparation, as explained in Section 5.5, we address the problematic exponential depth of the bucket-brigade QRAM (when decomposed). We present in Section 5.6 a very efficient Clifford+T decomposition of the bucket-brigade QRAM, which preserves the linear scaling of the depth of the circuit without introducing any additional ancilla.
In ab-initio quantum chemistry, solving the electronic structure problem of a molecular system of interest to obtain an approximation of the ground and, in some cases, the excited state energies is a core and central task in various quantum chemistry processes. These include, but certainly not limited to, the calculation of the activation energy–that is the minimal energy required to launch a given chemical reaction–, the dipole and multipole moments which describe the polarity of the molecule, performing the optimization of the geometry of the molecule and searching for transition states. Furthermore, many quantum chemistry applications are predicated, not merely on the approximation of the ground state energy, but also on the corresponding first order derivatives. The body of literature of classical algorithms approximating the ground state energy and its first order derivative is extensively rich with a plethora of methods such as self-consistent mean-field methods, coupled-cluster methods, density matrix renormalization group and many more, each of which has intrinsic set of properties and characteristics that makes it suitable for specific tasks and cases. However, classical methods face a practically insurmountable challenge: the efficient computation of high accuracy approximation of ground state energies of large system sizes. This is fundamentally because the electronic structure problem provably belongs to the complexity class of QMA-hard problems. Which also means that it is out of reach for quantum algorithms as well in general. However, with certain assumptions that are expected to hold molecules of interest–that so far proved to be classically challenging because the required accuracy set by the standard of chemical accuracy threshold (generally held in quantum chemistry)– quantum algorithms can efficiently treat such cases. While originally theorized by Richard Feynmann as a potentially efficient way of simulating some classically intractable many-body systems, quantum computing has since proven to have a stronger and richer potential paving the way for the inception of new algorithms such as Shor’s algorithm for integer factorization, HHL for solving linear system of equation and Grover’s algorithm for constrained binary search, just to name a few. These algorithms provably exhibit an improvement rate that goes respectively exponentially and quadratically in the time complexity. Quantum chemistry is considered a prominent candidate to benefit from quantum computing given the variety of quantum algorithms put forth to solve the electronic structure problem of particular systems of interest. These quantum algorithm proposals can be broadly categorized in three main categories that span the spectrum: from noisy intermediate scale quantum (NISQ) computers to early and full scale fault tolerant quantum ((E)FTQC) computers. Firstly, the variational quantum eigensolver (VQE) family of quantum algorithms which variationally search for the ground state energy through the optimization of the energy of a parametrized state prepared in a quantum computer using an ansatz. Secondly, the quantum Krylov subspace diagonalization (QKSD) methods, which generate a subspace of the original Hilbert space and efficiently produce the lowest energy in said subspace as its output. Lastly, we have the quantum phase estimation (QPE) algorithms, which provably produce the ground state energy in Heisenberg scaling presenting hence a provable efficient solution. In this thesis, we firstly set to work on the problem of efficient Hamiltonian linear combination of unitaries (LCU) representation. This is mainly motivated by the wide-range impact an efficient compression of the Hamiltonian can potentially have on several quantum algorithms such as VQE, QPE...etc. We designed a method that efficiently compress the Hamiltonian representation in a way that is beneficially impactful across the set of the aforementioned quantum algorithms. Namely, we motivate and present in Sections 1.3 and 1.4 respectively, the regularized compressed double-factorization (RC-DF) and show how it reduces the energy measurement complexity both in terms of number of distinct observables and number of samples. Moreover, it also reduces the total depth of the quantum phase estimation circuit thanks to its low normalization factor. Secondly, given the importance of the energy derivatives, in Sections 2.1 and 2.2, we introduce and present an efficient quantum algorithm for the calculation of the analytic gradient of VQE energies of double-factorized Hamiltonians. Furthermore, in Section 2.1, we expand on the utility of RC-DF by presenting a quantum algorithm that determines the analytic gradient of energies measured with respect to RC-DF Hamiltonains. Third, in Section 3.1, we summarize the theoretical results of purification error-mitigation techniques, namely echo verification and virtual distillation. In Section 3.2, we report on the results of the experimental bench mark, of said techniques, performed on on Google’s Sycamore device to validate the theoretical scaling of error suppression and extrapolate the resources needed for classically intractable system sizes. Fourth, in Section 4 we establish the challenges of computing energy gradients in a quantum Krylov frame work. To overcome the problem, we provide, in Section 4.3, an efficient quantum algorithm for calculating energy derivative obtained through QKSD procedures. Our approach shows how the QKSD ground state can be prepared using quantum signal processing (QSP) and reduces the number of observables to O(1) per reduced density matrix (RDM). Lastly, in light of the importance of quantum RAMs due to their utility in a variety of quantum algorithms that require efficient initial state preparation, as explained in Section 5.5, we address the problematic exponential depth of the bucket-brigade QRAM (when decomposed). We present in Section 5.6 a very efficient Clifford+T decomposition of the bucket-brigade QRAM, which preserves the linear scaling of the depth of the circuit without introducing any additional ancilla.
Quantum chemistry models atoms and molecules using quantum mechanics, with the electronic structure problem at its core. This problem, which determines the energy and properties of electrons in a molecule, is exponentially hard to solve exactly on classical computers. To approximate solutions, effective models introduce layers of simplifications. However, these approximations can fail for strongly correlated systems, necessitating alternative approaches. Quantum computers, capable of processing quantum information natively, offer a promising path to simulate molecular systems beyond classical reach, with potential applications in catalysis, materials science, and photochemistry. Despite rapid advancements in quantum hardware, practical quantum computations remain challenging due to limited resources. This thesis optimizes quantum resource usage in computational chemistry, introducing novel embedding techniques and exploring applications beyond ground-state energies. Chapter 1 establishes the foundation by reviewing quantum chemistry methods, from Hartree-Fock and Density Functional Theory (DFT) to active space approaches. It also provides an introduction to quantum computing for chemistry, focusing on near-term algorithms. The following chapters present novel methods aimed at reducing quantum resource requirements and tackling problems classical methods struggle with. Chapter 2 introduces a technique to reduce the λ-norm of the electronic structure Hamiltonian, a key measure of quantum resource demand. By transforming molecular orbitals, this method enhances sampling efficiency in Noisy Intermediate-Scale Quantum (NISQ) algorithms and reduces runtime in Fault-Tolerant Quantum Computing (FTQC). Localized orbitals outperform canonical ones, and an orbital-optimization scheme is proposed to minimize the λ-norm. Benchmarks on hydrogen chains, FeMoco, and Ruthenium complexes demonstrate its effectiveness. Chapter 3 presents the FragPT2 framework for simulating large systems with multiple interacting fragments. This method embeds each fragment in the mean field of others and applies multi-reference perturbation theory to capture inter-fragment correlations such as dispersion and charge transfer efficiently. The approach reduces computational overhead and enables scalable simulations, as shown in applications to \ce{N2} dimers, aromatic dimers, and butadiene. Chapter 4 focuses on photochemical systems, where multiple electronic states must be treated equally. The state-averaged orbital-optimized variational quantum eigensolver (SAOOVQE) is extended with analytical energy gradients and non-adiabatic couplings, enabling geometry optimizations and simulations of non-adiabatic dynamics on quantum hardware. This is demonstrated by locating the conical intersection in formaldimine, highlighting SAOOVQE’s potential for studying photoisomerization in biomolecules. Building on this, Chapter 5 develops a quantum algorithm to detect conical intersections, where the Born-Oppenheimer approximation breaks down. These intersections are characterized by a discrete Berry phase (0 or π), representing their topological nature. The algorithm extracts this phase as a single bit of information, ensuring resilience to noise. Analytical proof and numerical validation using a toy molecular model illustrate its effectiveness for studying light-perception biochemistry and related photochemical processes. Finally, Chapter 6 explores machine learning density functionals trained on noisy quantum data. While DFT is computationally efficient, its accuracy depends on approximated exchange-correlation functionals. This work proposes a neural network-based approach to learn the exact functional from quantum data, showing that training on noisy outputs from NISQ devices can mitigate sampling errors. Applications to the Fermi-Hubbard model and other systems demonstrate its potential to generalize and provide accurate results under noise. This thesis advances quantum computational chemistry by optimizing quantum resource usage, developing new embedding strategies, and expanding the scope of quantum simulations beyond ground-state properties. These contributions pave the way for practical quantum algorithms that could revolutionize molecular simulations in the near future.
The advancements in classical computational components such as CPUs and GPUs have had a reverberating impact on the democratization of computational power available, with the field of computational chemistry reaping significant benefits from the propulsion of the limits of systems studied. The accurate prediction of chemical properties and reaction dynamics through computational simulation is now a centerpiece of modern chemical research, significantly accelerating discoveries research areas of materials science and drug development, as well as industrially relevant processes such as the emission of aldehydes from soft foams, flame retardants and pyrolysis and the carbonylation of epoxides. These achievements of computational chemistry still are overshadowed in the face of fundamental bottlenecks where classical methods remain constrained by the exponential scaling when treating large and/or strongly correlated quantum many-body systems. This innate computational complexity often constitutes chemically accurate calculations based on first principles impractical, or plain impossible, for systems beyond modest sizes. Quantum computing offers a potential pathway around these limitations, originally formally formulated by David Deutsch as a tool for simulating quantum systems, with the first quantum algorithms indicating speed-ups compared to classical counterparts arising from Peter Shor and Lov Grover for the prime factorization of an integer number and unstructured search respectively. Relying on fundamental theorems by Claude Shannon, it has been demonstrated that through the use of error-correcting codes fault-tolerant quantum computers are able to safeguard information against noise and decoherence, strongly indicating towards exponential speedups in solving central computational chemistry problems, such as determining ground state energies or reaction pathways of chemical systems. Substantial strides in experimental quantum computing over the past decade, including proof-of-principle demonstrations of quantum error correction, mean to bring full-scale fault-tolerant quantum computing within the grasp of humanity. The breakthroughs needed to attain scalable, error-corrected quantum computation with capabilities exceeding those of classical methods in real-world scenarios is likely still some years away. While striving to address the engineering challenges standing in the way of achieving fault tolerant quantum computing, substantial effort has been focused toward developing and benchmarking hybrid algorithms tailored for the Noisy Intermediate- Scale Quantum (NISQ) devices, available now to researchers. These hybrid quantum-classical algorithms, with the most notable being the Variational Quantum Eigensolver (VQE), allow the probing of quantum computing’s utility in computational chemistry even in the face of significant hardware noise and limited coherence times. The work presented in this thesis introduces several key additions the VQE framework, geared especially towards to NISQ hardware, where the mindful use of available resources is imperative. First, the implementation of the Conjugate Model Search optimizer is described, an optimization method that integrates simple models that are surrogate to the original function, combined with conjugate gradient optimization to navigate effectively parameter landscapes typical of variational algorithms, prone to noise. Second, this thesis contains the proposal and extensive study of a hyperparameter tuning procedure employing genetic algorithms, allowing for comprehensive simulation benchmarks that augment the robustness and efficiency of VQE implementations with respect to convergence time through real wall-time models of quantum processors. Continuing, a bridge is presented between quantum simulation and quantum chemistry, through qubit-to-fermion mappings of existing quantum gates, further enabling the direct and accurate modeling of chemical systems on trapped atom quantum hardware with the added arsenal provided by techniques designed for qubit architectures. Additionally, experimental data contained in this thesis include detailed benchmarking data collected from state-of-the-art trapped ion quantum processors available at the Johannes Gutenberg Universität Mainz, demonstrating the actual viability and performance of various methodologies for extracting results. Lastly, the state of VQE is examined, as it served as a springboard for a plethora of advancements in the development of quantum computing hardware, as well as the direction the field of simulation of computational quantum chemistry via quantum devices is headed towards in the coming years.
Accurate prediction of molecular structures and properties is vital for chemistry; materials science, and drug discovery, yet classical electronic-structure methods often fail for strongly correlated systems, large basis sets, and complex potential-energy landscapes. Quantum technology encompassing quantum computing, quantum machine learning, and hybrid quantum classical strategies offers a fundamentally new paradigm by encoding many-electron wave functions directly on qubits and exploiting superposition and entanglement to explore exponentially large Hilbert spaces. This review synthesizes recent algorithmic and hardware advances relevant to molecular modelling, including the Variational Quantum Eigensolver (VQE), Quantum Phase Estimation (QPE), quantum unitary coupled-cluster (q-UCC) families, equation-of-motion and subspace methods for excited states, tensor-network hybrids, and quantum kernel and variational QML approaches. We examine noise-aware hybrid workflows, error-mitigation techniques, symmetry-preserving ansätze, and operator-factorization methods that reduce measurement and gate overhead. Representative applications are discussed: ground- and excited-state energy prediction, potential-energy surface mapping, geometry and transition-state optimization, spectroscopic property estimation (IR, UV–Vis, NMR, EPR), and reaction-dynamics scenarios where non-adiabatic effects and conical intersections dominate. Resource estimates and scaling analyses clarify current NISQ limitations qubit counts, circuit depth, shot complexity and delineate the roadmap to fault-tolerant QPE for chemical accuracy. We compare quantum approaches with classical baselines (DFT, CCSD (T), multireference methods), identifying domains where quantum methods already show promise (strong correlation, multi-reference dissociation, spin-state ordering) and where classical methods remain competitive. Finally, we highlight near-term industrial opportunities in drug design, catalysis, CO2 capture, and energy materials, and outline critical research directions: algorithmic reductions in measurement/precision cost, hardware improvements in fidelity and connectivity, scalable ansatz design, and integrated software stacks for reproducible hybrid simulations. Together, these developments indicate that while practical, large-scale quantum advantage for general chemistry remains future work, quantum technologies are rapidly maturing into powerful tools for targeted molecular problems that are intractable with existing classical techniques.
Quantum chemistry is envisioned as an early and disruptive application for quantum computers. Yet, closer scrutiny of the proposed algorithms shows that there are considerable difficulties along the way. Here, we propose two criteria for evaluating two leading quantum approaches for finding the ground state of molecules. The first criterion applies to the variational quantum eigensolver (VQE) algorithm. It sets an upper bound to the level of imprecision/decoherence that can be tolerated in quantum hardware as a function of the targeted precision, the number of gates and the typical energy contribution from states populated by decoherence processes. We find that decoherence is highly detrimental to the accuracy of VQE and performing relevant chemistry calculations would require performances that are expected for fault-tolerant quantum computers, not mere noisy hardware, even with advanced error mitigation techniques. Physically, the sensitivity of VQE to decoherence originates from the fact that, in VQE, the spectrum of the studied molecule has no correlation with the spectrum of the quantum hardware used to perform the computation. The second criterion applies to the quantum phase estimation (QPE) algorithm, which is often presented as the go-to replacement of VQE upon availability of (noiseless) fault-tolerant quantum computers. QPE requires an input state with a large enough overlap with the sought-after ground state. We provide a criterion to estimate quantitatively this overlap based on the energy and the energy variance of said input state. Using input states from a variety of state-of-the-art classical methods, we show that the scaling of this overlap with system size does display the standard orthogonality catastrophe, namely an exponential suppression with system size. This in turns leads to an exponentially reduced QPE success probability.
Quantum computing promises to efficiently and accurately solve many important problems in quantum chemistry which elude classical solvers, such as the electronic structure problem of highly correlated materials. Two leading methods in solving the ground state problem are the Variational Quantum Eigensolver (VQE) and Adiabatic Quantum Computing (AQC) algorithms. VQE often struggles with convergence due to the energy landscape being highly non-convex and the existence of barren plateaux, and implementing AQC is beyond the capabilities of current quantum devices as it requires deep circuits. Adiabatically-inspired algorithms aim to fill this gap. In this paper, we first present a unifying framework for these algorithms and then benchmark the following methods: the Adiabatically Assisted VQE (AAVQE) (Garcia-Saez and Latorre (2018)), the Variational Adiabatic Quantum Computing (VAQC) (Harwood et al (2022)), and the Adiabatic Quantum Computing with Parametrized Quantum Circuits (AQC-PQC) (Kolotouros et al (2025)) algorithms. Second, we introduce a novel hybrid approach termed G-AQC-PQC, which generalizes the AQC-PQC method, and combines adiabatic-inspired initialization with the low-memory BFGS optimizer, reducing the quantum computational cost of the method. Third, we compare the accuracy of the methods for chemistry applications using the beryllium hydride molecule (BeH2). We compare the approaches across a number of different choices (ansätze types, depth, discretization steps, initial Hamiltonian, adiabatic schedules and method used). Our results show that the G-AQC-PQC outperforms conventional VQE. We further discuss limitations such as the zero-gradient problem and identify regimes where adiabatically-inspired methods offer a tangible advantage for near-term quantum chemistry applications.
One of the first practical applications of quantum computers is expected to be molecular modelling. Performing this task would profoundly affect areas such as chemistry, materials science and drug synthesis. Modelling of molecules, which are classically intractable, can be achieved with just over 30 qubits, whereas state of the art quantum computers already have more than 50 qubits. The Variational Quantum Eigensolver (VQE) algorithm and VQE based protocols, are promising candidates to enable this task on emerging Noisy Intermediate-Scale Quantum (NISQ) computers. These protocols require short quantum circuits and short coherence times, and are particularly resilient to quantum errors. Nevertheless, there is still a significant gap between the accuracy and the coherence times of current NISQ computers, and the hardware requirements of VQE protocols to simulate practically interesting molecules. In this thesis, I present my contribution to narrowing this gap by developing VQE protocols for molecular modelling that are less demanding on quantum hardware. The VQE relies on the Rayleigh-Ritz variational principle to estimate the eigenvalues of a Hamiltonian operator, by minimizing its expectation value with respect to a trial quantum state, prepared by an ansatz. A major challenge for the practical realisation of VQE protocols on NISQ computers is to construct an ansatz that: (1) can accurately approximate the eigenstates of the Hamiltonian; (2) is easy to optimize; and (3) can be implemented by a shallow circuit, within the capabilities of a NISQ computer. The most widely used, unitary coupled cluster (UCC), type of ans\"atze mathematically correspond to a product of unitary evolutions of fermionic excitation operators. Owing to their fermionic structure, UCC ans\"atze preserve the symmetries of electronic wavefunctions, and thus are accurate and easy to optimize. Nevertheless, UCC ans\"atze are implemented by high depth circuits, which severely limit the size of the molecules that can be reliably simulated on NISQ computers. In this thesis, I begin by constructing efficient quantum circuits to perform evolutions of fermionic excitation operators. The circuits are optimized in the number of two-qubit entangling gates, which are the current bottleneck of NISQ computers. Compared to the standard circuits used to implement evolutions of fermionic excitation operators, the circuits derived in this thesis reduce the number of two-qubit entangling gates by more than 70% on average. As an intermediate result, I also derive efficient circuits to perform evolutions of qubit excitation operators (excitation operators that account for qubit, rather than fermionic commutation relations). Even with the fermionic-excitation-evolution circuits derived here, UCC ans\"atze still require very long circuits, with a particularly large number of two-qubit entangling gates. In this thesis, I consider the use of alternative VQE ans\"atze, based on evolutions of qubit excitation operators. Due to not accounting for fermionic anticommutation, evolutions of qubit excitation operators can be performed by circuits that require asymptotically fewer two-qubit entangling gates. Furthermore, qubit excitation operators preserve many of the physical properties of fermionic excitation operators. Performing a number of classical numerical VQE simulations for small molecules, I show that qubit-excitation-based ans\"atze can approximate molecular electronic wavefunctions almost as accurately as fermionic-excitation-based ans\"atze. Hence, I argue that evolutions of qubit excitation operators are more suitable to construct molecular ans\"atze than evolutions of fermionic excitation operators, especially in the era of NISQ computers. Motivated by the advantage of qubit-excitation-based ans\"atze, I introduce the qubit-excitation-based adaptive variational quantum eigensolver (QEB-ADAPT-VQE). The QEB-ADAPT-VQE belongs to a family of ADAPT-VQE protocols for molecular modelling that grow a problem-tailored ansatz by iteratively appending unitary operators sampled from a predefined finite-size pool of operators. The operator at each iteration is sampled based on an ansatz-growing strategy, which aims to achieve the lowest estimate for the Hamiltonian expectation value at each iteration. In this way, ADAPT-VQE protocols construct shallow-circuit, few-parameter ans\"atze tailored specifically to the molecular systems of interest. In the case of the QEB-ADAPT-VQE, the operator pool is defined by a set of evolutions of single and double qubit excitation operators. I benchmark the performance of the QEB-ADAPT-VQE, by performing classical numerical simulations. I demonstrate that it can construct ans\"atze that are several orders of magnitude more accurate, and require significantly shallower circuits, than standard UCC ans\"atze. I also compare the QEB-ADAPT-VQE against the original fermionic-ADAPT-VQE, which utilizes a pool of fermionic excitation evolutions, and the qubit-ADAPT-VQE, which utilizes a pool of Pauli-string evolutions. I demonstrate that, in terms of circuit efficiency and convergence speed, the QEB-ADAPT-VQE systematically outperforms the qubit-ADAPT-VQE, which to my knowledge was the previous most circuit-efficient, scalable VQE protocol for molecular modeling. The QEB-ADAPT-VQE protocol, therefore represents a significant improvement in the field of VQE protocols for molecular modelling and brings us closer to achieving practical quantum advantage. Lastly, I outline a modified version of the QEB-ADAPT-VQE, the excited-QEB-ADAPT-VQE, designed to estimate energies of excited molecular states. The excited-QEB-ADAPT-VQE is more robust to initial simulation conditions, at the expense of increased computational complexity.