Quantum chemistry is envisioned as an early and disruptive application for quantum computers. Yet, closer scrutiny of the proposed algorithms shows that there are considerable difficulties along the way. Here, we propose two criteria for evaluating two leading quantum approaches for finding the ground state of molecules. The first criterion applies to the variational quantum eigensolver (VQE) algorithm. It sets an upper bound to the level of imprecision/decoherence that can be tolerated in quantum hardware as a function of the targeted precision, the number of gates and the typical energy contribution from states populated by decoherence processes. We find that decoherence is highly detrimental to the accuracy of VQE and performing relevant chemistry calculations would require performances that are expected for fault-tolerant quantum computers, not mere noisy hardware, even with advanced error mitigation techniques. Physically, the sensitivity of VQE to decoherence originates from the fact that, in VQE, the spectrum of the studied molecule has no correlation with the spectrum of the quantum hardware used to perform the computation. The second criterion applies to the quantum phase estimation (QPE) algorithm, which is often presented as the go-to replacement of VQE upon availability of (noiseless) fault-tolerant quantum computers. QPE requires an input state with a large enough overlap with the sought-after ground state. We provide a criterion to estimate quantitatively this overlap based on the energy and the energy variance of said input state. Using input states from a variety of state-of-the-art classical methods, we show that the scaling of this overlap with system size does display the standard orthogonality catastrophe, namely an exponential suppression with system size. This in turns leads to an exponentially reduced QPE success probability.
Quantum chemistry is envisioned as an early and disruptive application for quantum computers. Yet, closer scrutiny of the proposed algorithms shows that there are considerable difficulties along the way. Here, we propose two criteria for evaluating two leading quantum approaches for finding the ground state of molecules. The first criterion applies to the variational quantum eigensolver (VQE) algorithm. It sets an upper bound to the level of imprecision/decoherence that can be tolerated in quantum hardware as a function of the targeted precision, the number of gates and the typical energy contribution from states populated by decoherence processes. We find that decoherence is highly detrimental to the accuracy of VQE and performing relevant chemistry calculations would require performances that are expected for fault-tolerant quantum computers, not mere noisy hardware, even with advanced error mitigation techniques. Physically, the sensitivity of VQE to decoherence originates from the fact that, in VQE, the spectrum of the studied molecule has no correlation with the spectrum of the quantum hardware used to perform the computation. The second criterion applies to the quantum phase estimation (QPE) algorithm, which is often presented as the go-to replacement of VQE upon availability of (noiseless) fault-tolerant quantum computers. QPE requires an input state with a large enough overlap with the sought-after ground state. We provide a criterion to estimate quantitatively this overlap based on the energy and the energy variance of said input state. Using input states from a variety of state-of-the-art classical methods, we show that the scaling of this overlap with system size does display the standard orthogonality catastrophe, namely an exponential suppression with system size. This in turns leads to an exponentially reduced QPE success probability.
Quantum computers are anticipated to provide computational advantages over classical devices for specific classes of problems.In quantum chemistry, such an advantage can be achieved on fault-tolerant quantum computers (FTQCs) using quantum phase estimation (QPE), which can, in principle, provide accurate electronic energies with polynomial scaling.However, the practical success of QPE and related algorithms critically depends on the availability of high-quality initial quantum states with sufficient overlap with the target eigenstates.Moreover, even FTQCs are expected to be limited in size and total computational resources for the foreseeable future, restricting quantum calculations to reduced subspaces and allowing only a partial treatment of electronic correlation.For chemically meaningful predictions, the remaining correlation effects must therefore be recovered through post-processing.
The advancements in classical computational components such as CPUs and GPUs have had a reverberating impact on the democratization of computational power available, with the field of computational chemistry reaping significant benefits from the propulsion of the limits of systems studied. The accurate prediction of chemical properties and reaction dynamics through computational simulation is now a centerpiece of modern chemical research, significantly accelerating discoveries research areas of materials science and drug development, as well as industrially relevant processes such as the emission of aldehydes from soft foams, flame retardants and pyrolysis and the carbonylation of epoxides. These achievements of computational chemistry still are overshadowed in the face of fundamental bottlenecks where classical methods remain constrained by the exponential scaling when treating large and/or strongly correlated quantum many-body systems. This innate computational complexity often constitutes chemically accurate calculations based on first principles impractical, or plain impossible, for systems beyond modest sizes. Quantum computing offers a potential pathway around these limitations, originally formally formulated by David Deutsch as a tool for simulating quantum systems, with the first quantum algorithms indicating speed-ups compared to classical counterparts arising from Peter Shor and Lov Grover for the prime factorization of an integer number and unstructured search respectively. Relying on fundamental theorems by Claude Shannon, it has been demonstrated that through the use of error-correcting codes fault-tolerant quantum computers are able to safeguard information against noise and decoherence, strongly indicating towards exponential speedups in solving central computational chemistry problems, such as determining ground state energies or reaction pathways of chemical systems. Substantial strides in experimental quantum computing over the past decade, including proof-of-principle demonstrations of quantum error correction, mean to bring full-scale fault-tolerant quantum computing within the grasp of humanity. The breakthroughs needed to attain scalable, error-corrected quantum computation with capabilities exceeding those of classical methods in real-world scenarios is likely still some years away. While striving to address the engineering challenges standing in the way of achieving fault tolerant quantum computing, substantial effort has been focused toward developing and benchmarking hybrid algorithms tailored for the Noisy Intermediate- Scale Quantum (NISQ) devices, available now to researchers. These hybrid quantum-classical algorithms, with the most notable being the Variational Quantum Eigensolver (VQE), allow the probing of quantum computing’s utility in computational chemistry even in the face of significant hardware noise and limited coherence times. The work presented in this thesis introduces several key additions the VQE framework, geared especially towards to NISQ hardware, where the mindful use of available resources is imperative. First, the implementation of the Conjugate Model Search optimizer is described, an optimization method that integrates simple models that are surrogate to the original function, combined with conjugate gradient optimization to navigate effectively parameter landscapes typical of variational algorithms, prone to noise. Second, this thesis contains the proposal and extensive study of a hyperparameter tuning procedure employing genetic algorithms, allowing for comprehensive simulation benchmarks that augment the robustness and efficiency of VQE implementations with respect to convergence time through real wall-time models of quantum processors. Continuing, a bridge is presented between quantum simulation and quantum chemistry, through qubit-to-fermion mappings of existing quantum gates, further enabling the direct and accurate modeling of chemical systems on trapped atom quantum hardware with the added arsenal provided by techniques designed for qubit architectures. Additionally, experimental data contained in this thesis include detailed benchmarking data collected from state-of-the-art trapped ion quantum processors available at the Johannes Gutenberg Universität Mainz, demonstrating the actual viability and performance of various methodologies for extracting results. Lastly, the state of VQE is examined, as it served as a springboard for a plethora of advancements in the development of quantum computing hardware, as well as the direction the field of simulation of computational quantum chemistry via quantum devices is headed towards in the coming years.
Quantum chemistry is among the most promising applications of quantum computing, offering the potential to solve complex electronic structure problems more efficiently than classical approaches. A critical component of any quantum algorithm is the measurement step, where the desired properties are extracted from a quantum computer. This review focuses on recent advancements in quantum measurement techniques tailored for quantum chemistry, particularly within the second quantized framework suitable for current and near-term quantum hardware. We provide a comprehensive overview of measurement strategies developed primarily for the Variational Quantum Eigensolver (VQE) and its derivatives. These strategies address the inherent challenges posed by the complexity of the electronic Hamiltonian operator. Additionally, we examine methods for estimating excited states and one- and two-electron properties, extending the applicability of quantum algorithms to broader chemical phenomena. Key aspects of the review include approaches for constructing measurement operators with reduced classical preprocessing and quantum implementation costs, techniques to minimize the number of measurements required for a given accuracy, and error mitigation strategies that leverage symmetries and other properties of the measurement operators. Furthermore, we explore measurement schemes rooted in Quantum Phase Estimation (QPE), which are expected to become viable with the advent of fault-tolerant quantum computing. This review emphasizes foundational concepts and methodologies rather than numerical benchmarks, serving as a resource for researchers aiming to enhance the efficiency and accuracy of quantum measurements in quantum chemistry.
Quantum chemistry is among the most promising applications of quantum computing, offering the potential to solve complex electronic structure problems more efficiently than classical approaches. A critical component of any quantum algorithm is the measurement step, where the desired properties are extracted from a quantum computer. This review focuses on recent advancements in quantum measurement techniques tailored for quantum chemistry, particularly within the second quantized framework suitable for current and near-term quantum hardware. We provide a comprehensive overview of measurement strategies developed primarily for the Variational Quantum Eigensolver (VQE) and its derivatives. These strategies address the inherent challenges posed by complexity of the electronic Hamiltonian operator. Additionally, we examine methods for estimating excited states and one- and two-electron properties, extending the applicability of quantum algorithms to broader chemical phenomena. Key aspects of the review include approaches for constructing measurement operators with reduced classical preprocessing and quantum implementation costs, techniques to minimize the number of measurements required for a given accuracy, and error mitigation strategies that leverage symmetries and other properties of the measurement operators. Furthermore, we explore measurement schemes rooted in Quantum Phase Estimation (QPE), which are expected to become viable with the advent of fault-tolerant quantum computing. This review emphasizes foundational concepts and methodologies rather than numerical benchmarks, serving as a resource for researchers aiming to enhance the efficiency and accuracy of quantum measurements in quantum chemistry.
High Resolution Image Download MS PowerPoint Slide The recent developments of quantum computing present novel potential pathways for quantum chemistry as the scaling of the computational power of quantum computers could be harnessed to naturally encode and solve electronic structure problems. Theoretically exact quantum algorithms for chemistry have been proposed (e.g., quantum phase estimation), but the limited capabilities of current noisy intermediate-scale quantum devices motivated the development of less demanding hybrid algorithms. In this context, the variational quantum eigensolver (VQE) algorithm was successfully introduced as an effective method to compute the ground-state energies of small molecules. This study investigates the folded spectrum (FS) method as an extension of the VQE algorithm for the computation of molecular excited states. It provides the possibility of directly computing excited states around a selected target energy using the same or quantum circuit as for the ground-state calculation. Inspired by the variance-based methods from the quantum Monte Carlo literature, the FS method minimizes the energy variance, thus, in principle, requiring a computationally expensive squared Hamiltonian to be applied. We alleviate this potentially poor scaling by employing a Pauli grouping procedure to identify sets of commuting Pauli strings that can be evaluated simultaneously. This allows for a significant reduction in the computational cost. We applied the FS-VQE method to small molecules (H 2, LiH), obtaining all electronic excited states with chemical accuracy on ideal quantum simulators. Furthermore, we explore the application of quantum error mitigation techniques, demonstrating improved energy accuracy on noisy simulators compared with simulations without mitigation.
Current quantum computers are limited in the number of qubits and coherence time, constraining the algorithms executable with sufficient fidelity. The variational quantum eigensolver (VQE) is an algorithm to find an approximate ground state of a quantum system and is expected to work on even such a device. The deep VQE [K. Fujii, et al., arXiv:2007.10917] is an extension of the original VQE algorithm, which takes a divide-and-conquer approach to relax the hardware requirement. While the deep VQE is successfully applied for spin models and periodic material, its validity on a molecule, where the Hamiltonian is highly nonlocal in the qubit basis, is still unexplored. Here, we discuss the performance of the deep VQE algorithm applied to quantum chemistry problems. Specifically, we examine different subspace-forming methods and compare their accuracy and complexity on a 10 H-atom treelike molecule as well as a 13 H-atom version. Additionally, we examine the performance on the natural occurring molecule retinal. This work also proposes multiple methods to lower the number of qubits required to calculate the ground state of a molecule. We find that the deep VQE can simulate the electron-correlation energy of the ground state to an error of below 1%, thus helping us to reach chemical accuracy in some cases. The accuracy differences and qubits' reduction highlights the basis creation method's impact on the deep VQE.