Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2202.08473 · Physical Review Applied

Constructing Local Bases for a Deep Variational Quantum Eigensolver for Molecular Systems

Luca Erhart, Kosuke Mitarai, Wataru Mizukami, Keisuke Fujii

Published Dec 16, 2022• 3 citations
arXivHTMLPDF

Abstract

Current quantum computers are limited in the number of qubits and coherence time, constraining the algorithms executable with sufficient fidelity. The variational quantum eigensolver (VQE) is an algorithm to find an approximate ground state of a quantum system and is expected to work on even such a device. The deep VQE [K. Fujii, et al., arXiv:2007.10917] is an extension of the original VQE algorithm, which takes a divide-and-conquer approach to relax the hardware requirement. While the deep VQE is successfully applied for spin models and periodic material, its validity on a molecule, where the Hamiltonian is highly nonlocal in the qubit basis, is still unexplored. Here, we discuss the performance of the deep VQE algorithm applied to quantum chemistry problems. Specifically, we examine different subspace-forming methods and compare their accuracy and complexity on a 10 $\mathrm{H}$-atom treelike molecule as well as a 13 $\mathrm{H}$-atom version. Additionally, we examine the performance on the natural occurring molecule retinal. This work also proposes multiple methods to lower the number of qubits required to calculate the ground state of a molecule. We find that the deep VQE can simulate the electron-correlation energy of the ground state to an error of below 1%, thus helping us to reach chemical accuracy in some cases. The accuracy differences and qubits' reduction highlights the basis creation method's impact on the deep VQE.

DOI
10.1103/physrevapplied.18.064051

Related papers

Deep variational quantum eigensolver for excited states and its application to quantum chemistry calculation of periodic materials

Kaoru Mizuta, Mikiya Fujii, Shigeki Fujii +4 more

A programmable quantum device that has a large number of qubits without fault-tolerance has emerged recently. Variational quantum eigensolver (VQE) is one of the most promising ways to utilize the computational power of such devices to solve problems in condensed matter physics and quantum chemistry. As the size of the current quantum devices is still not large for rivaling classical computers at solving practical problems, Fujii et al. proposed a method called ``Deep VQE'', which can provide the ground state of a given quantum system with the smaller number of qubits by combining the VQE and the technique of coarse graining [K. Fujii, K. Mitarai, W. Mizukami, and Y. O. Nakagawa, arXiv:2007.10917]. In this paper, we extend the original proposal of Deep VQE to obtain the excited states and apply it to quantum chemistry calculation of a periodic material, which is one of the most impactful applications of the VQE. We first propose a modified scheme to construct quantum states for coarse graining in Deep VQE to obtain the excited states. We also present a method to avoid a problem of meaningless eigenvalues in the original Deep VQE without restricting variational quantum states. Finally, we classically simulate our modified Deep VQE for quantum chemistry calculation of a periodic hydrogen chain as a typical periodic material. Our method reproduces the ground-state energy and the first-excited-state energy with the errors up to $O(1)%$ despite the decrease in the number of qubits required for the calculation by two or four compared with the naive VQE. Our result will serve as a beacon for tackling quantum chemistry problems with classically-intractable sizes by smaller quantum devices in the near future.

arXiv:2104.00855•Physical Review Research•Nov 16, 2021•25 citations

Application of Variational Quantum Eigensolver for Ground State Energies Calculation in Hydrogen and Helium Atomic Sequences

Difa Farhani Hakim, Teguh Budi Prayitno, Yanoar Pribadi Sarwono

Exponential scaling presents a significant challenge in electronic structure calculations performed on classical computers. This paper explores how quantum computer algorithms can accurately represent quantum systems. Variational Quantum Eigensolver (VQE) algorithm is used to compute the ground state energy of hydrogen and helium sequences by implementing variational principle and quantum gates as trial wavefunction. This technique combines classical optimization with quantum computing calculations to simulate quantum systems on noisy and resource-limited computers. The resulting calculated energy is highly consistent to the corresponding exact values and Hartree-Fock calculations with a trend of when the number of atoms increases the calculated energy becomes more negative, leading to a decrease in the percentage error. Moreover, the convergence of the ground state energy of hydrogen and helium atoms was effectively optimized. The desired energy was reached, proven by adjusting the expectation value, and gradually achieving unity in state overlap. These findings demonstrate the VQE method's accuracy in calculating simple quantum systems and its scalability for larger atomic and molecular system, such as those in quantum chemistry and material science. However, challenges in quantum computer simulations, such as limited in qubit numbers and the presence of noise, require further advancements. Therefore, implementing a larger basis sets, advanced qubit mapping, specific chemistry ansatz, and flexible optimization techniques is one way to improve overall calculation.

SPEKTRA Jurnal Fisika dan Aplikasinya•Dec 14, 2024•2 citations

Deep Neural Network Assisted Quantum Chemistry Calculations on Quantum Computers

Kalpak Ghosh, Sumit Kumar, M. R. Nirmal +1 more

The variational quantum eigensolver (VQE) is a widely employed method to solve electronic structure problems in the current noisy intermediate-scale quantum (NISQ) devices. However, due to inherent noise in the NISQ devices, VQE results on NISQ devices often deviate significantly from the results obtained on noiseless statevector simulators or traditional classical computers. The iterative nature of VQE further amplifies the errors in each loop. Recent works have explored ways to integrate deep neural networks (DNN) with VQE to mitigate iterative errors, albeit primarily limited to the noiseless statevector simulators. In this work, we trained DNN models across various quantum circuits and examined the potential of two DNN-VQE approaches, DNN1 and DNNF, for predicting the ground state energies of small molecules in the presence of device noise. We carefully examined the accuracy of the DNN1, DNNF, and VQE methods on both noisy simulators and real quantum devices by considering different ansatzes of varying qubit counts and circuit depths. Our results illustrate the advantages and limitations of both VQE and DNN-VQE approaches. Notably, both DNN1 and DNNF methods consistently outperform the standard VQE method in providing more accurate ground state energies in noisy environments. However, despite being more accurate than VQE, the energies predicted using these methods on real quantum hardware remain meaningful only at reasonable circuit depths (depth = 15, gates = 21). At higher depths (depth = 83, gates = 112), they deviate significantly from the exact results. Additionally, we find that DNNF does not offer any notable advantage over VQE in terms of speed. Consequently, our study recommends DNN1 as the preferred method for obtaining quick and accurate ground state energies of molecules on current quantum hardware, particularly for quantum circuits with lower depth and fewer qubits.

ACS Omega•Dec 4, 2023•13 citations

Contextual Subspace Variational Quantum Eigensolver

William M. Kirby, Andrew Tranter, Peter J. Love

We describe the contextual subspace variational quantum eigensolver (CS-VQE), a hybrid quantum-classical algorithm for approximating the ground state energy of a Hamiltonian. The approximation to the ground state energy is obtained as the sum of two contributions. The first contribution comes from a noncontextual approximation to the Hamiltonian, and is computed classically. The second contribution is obtained by using the variational quantum eigensolver (VQE) technique to compute a contextual correction on a quantum processor. In general the VQE computation of the contextual correction uses fewer qubits and measurements than the VQE computation of the original problem. Varying the number of qubits used for the contextual correction adjusts the quality of the approximation. We simulate CS-VQE on tapered Hamiltonians for small molecules, and find that the number of qubits required to reach chemical accuracy can be reduced by more than a factor of two. The number of terms required to compute the contextual correction can be reduced by more than a factor of ten, without the use of other measurement reduction schemes. This indicates that CS-VQE is a promising approach for eigenvalue computations on noisy intermediate-scale quantum devices.

arXiv:2011.10027•Quantum•May 14, 2021•30 citations

A qubit-efficient variational selected configuration-interaction method

Daniel Yoffe, Noga Entin, Amir Natan +1 more

Abstract Finding the ground-state energy of molecules is an important and challenging computational problem for which quantum computing can potentially find efficient solutions. The variational quantum eigensolver (VQE) is a quantum algorithm that tackles the molecular groundstate problem and is regarded as one of the flagships of quantum computing. Yet, to date, only very small molecules were computed via VQE, due to high noise levels in current quantum devices. Here we present an alternative variational quantum scheme that requires significantly less qubits than VQE. The reduction in the qubit number allows for shallower circuits to be sufficient, rendering the method more resistant to noise. The proposed algorithm, termed variational quantum selected-configuration-interaction (VQ-SCI), is based on: (a) representing the target groundstate as a superposition of Slater determinant configurations, encoded directly upon the quantum computational basis states; and (b) selecting a-priory only the most dominant configurations. This is demonstrated through a set of groundstate calculations of the H2, LiH, BeH2, H2O, NH3 and C2H4 molecules in the sto-3g basis set, performed on IBM quantum devices. We show that the VQ-SCI reaches the full configuration interaction energy within chemical accuracy using the lowest number of qubits reported to date. Moreover, when the SCI matrix is generated ‘on the fly’, the VQ-SCI requires exponentially less memory than classical SCI methods. This offers a potential remedy to a severe memory bottleneck problem in classical SCI calculations. Finally, the proposed scheme is general and can be straightforwardly applied for finding the groundstate of any Hermitian matrix, outside the chemical context.

arXiv:2302.06691•Quantum Science and Technology•Sep 19, 2024•5 citations

Deep Variational Quantum Eigensolver: A Divide-And-Conquer Method for Solving a Larger Problem with Smaller Size Quantum Computers

Keisuke Fujii, Kaoru Mizuta, Hiroshi Ueda +3 more

We propose a divide-and-conquer method for the quantum-classical hybrid algorithm to solve larger problems with small-scale quantum computers.Specifically, we concatenate a variational quantum eigensolver (VQE) with a reduction in the system dimension, where the interactions between divided subsystems are taken as an effective Hamiltonian expanded by the reduced basis.Then the effective Hamiltonian is further solved by the VQE, which we call deep VQE.Deep VQE allows us to apply quantum-classical hybrid algorithms on small-scale quantum computers to large systems with strong intrasubsystem interactions and weak intersubsystem interactions, or strongly correlated spin models on large regular lattices.As proof-of-principle numerical demonstrations, we use the proposed method for quasi-one-dimensional models, including one-dimensionally coupled 12-qubit Heisenberg antiferromagnetic models on kagome lattices as well as two-dimensional Heisenberg antiferromagnetic models on square lattices.The largest problem size of 64 qubits is solved by simulating 20-qubit quantum computers with a reasonably good accuracy approximately a few %.The proposed scheme enables us to handle the problems of > 1000 qubits by concatenating VQEs with a few tens of qubits.While it is unclear how accurate ground-state energy can be obtained for such a large system, our numerical results on a 64-qubit system suggest that deep VQE provides a good approximation (discrepancy within a few percent) and has room for further improvement.Therefore, deep VQE provides us a promising pathway to solve practically important problems on noisy intermediate-scale quantum computers.

arXiv:2007.10917•PRX Quantum•Mar 21, 2022•66 citations
Current quantum computers are limited in the number of qubits and coherence time, constraining the algorithms executable with sufficient fidelity. The variational quantum eigensolver (VQE) is an algorithm to find an approximate ground state of a quantum system and is expected to work on even such a device. The deep VQE [K. Fujii, et al., arXiv:2007.10917] is an extension of the original VQE algorithm, which takes a divide-and-conquer approach to relax the hardware requirement. While the deep VQE is successfully applied for spin models and periodic material, its validity on a molecule, where the Hamiltonian is highly nonlocal in the qubit basis, is still unexplored. Here, we discuss the performance of the deep VQE algorithm applied to quantum chemistry problems. Specifically, we examine different subspace-forming methods and compare their accuracy and complexity on a 10 H\mathrm{H}H-atom treelike molecule as well as a 13 H\mathrm{H}H-atom version. Additionally, we examine the performance on the natural occurring molecule retinal. This work also proposes multiple methods to lower the number of qubits required to calculate the ground state of a molecule. We find that the deep VQE can simulate the electron-correlation energy of the ground state to an error of below 1%, thus helping us to reach chemical accuracy in some cases. The accuracy differences and qubits' reduction highlights the basis creation method's impact on the deep VQE.
A programmable quantum device that has a large number of qubits without fault-tolerance has emerged recently. Variational quantum eigensolver (VQE) is one of the most promising ways to utilize the computational power of such devices to solve problems in condensed matter physics and quantum chemistry. As the size of the current quantum devices is still not large for rivaling classical computers at solving practical problems, Fujii et al. proposed a method called ``Deep VQE'', which can provide the ground state of a given quantum system with the smaller number of qubits by combining the VQE and the technique of coarse graining [K. Fujii, K. Mitarai, W. Mizukami, and Y. O. Nakagawa, arXiv:2007.10917]. In this paper, we extend the original proposal of Deep VQE to obtain the excited states and apply it to quantum chemistry calculation of a periodic material, which is one of the most impactful applications of the VQE. We first propose a modified scheme to construct quantum states for coarse graining in Deep VQE to obtain the excited states. We also present a method to avoid a problem of meaningless eigenvalues in the original Deep VQE without restricting variational quantum states. Finally, we classically simulate our modified Deep VQE for quantum chemistry calculation of a periodic hydrogen chain as a typical periodic material. Our method reproduces the ground-state energy and the first-excited-state energy with the errors up to O(1)O(1)%O(1) despite the decrease in the number of qubits required for the calculation by two or four compared with the naive VQE. Our result will serve as a beacon for tackling quantum chemistry problems with classically-intractable sizes by smaller quantum devices in the near future.
Exponential scaling presents a significant challenge in electronic structure calculations performed on classical computers. This paper explores how quantum computer algorithms can accurately represent quantum systems. Variational Quantum Eigensolver (VQE) algorithm is used to compute the ground state energy of hydrogen and helium sequences by implementing variational principle and quantum gates as trial wavefunction. This technique combines classical optimization with quantum computing calculations to simulate quantum systems on noisy and resource-limited computers. The resulting calculated energy is highly consistent to the corresponding exact values and Hartree-Fock calculations with a trend of when the number of atoms increases the calculated energy becomes more negative, leading to a decrease in the percentage error. Moreover, the convergence of the ground state energy of hydrogen and helium atoms was effectively optimized. The desired energy was reached, proven by adjusting the expectation value, and gradually achieving unity in state overlap. These findings demonstrate the VQE method's accuracy in calculating simple quantum systems and its scalability for larger atomic and molecular system, such as those in quantum chemistry and material science. However, challenges in quantum computer simulations, such as limited in qubit numbers and the presence of noise, require further advancements. Therefore, implementing a larger basis sets, advanced qubit mapping, specific chemistry ansatz, and flexible optimization techniques is one way to improve overall calculation.
The variational quantum eigensolver (VQE) is a widely employed method to solve electronic structure problems in the current noisy intermediate-scale quantum (NISQ) devices. However, due to inherent noise in the NISQ devices, VQE results on NISQ devices often deviate significantly from the results obtained on noiseless statevector simulators or traditional classical computers. The iterative nature of VQE further amplifies the errors in each loop. Recent works have explored ways to integrate deep neural networks (DNN) with VQE to mitigate iterative errors, albeit primarily limited to the noiseless statevector simulators. In this work, we trained DNN models across various quantum circuits and examined the potential of two DNN-VQE approaches, DNN1 and DNNF, for predicting the ground state energies of small molecules in the presence of device noise. We carefully examined the accuracy of the DNN1, DNNF, and VQE methods on both noisy simulators and real quantum devices by considering different ansatzes of varying qubit counts and circuit depths. Our results illustrate the advantages and limitations of both VQE and DNN-VQE approaches. Notably, both DNN1 and DNNF methods consistently outperform the standard VQE method in providing more accurate ground state energies in noisy environments. However, despite being more accurate than VQE, the energies predicted using these methods on real quantum hardware remain meaningful only at reasonable circuit depths (depth = 15, gates = 21). At higher depths (depth = 83, gates = 112), they deviate significantly from the exact results. Additionally, we find that DNNF does not offer any notable advantage over VQE in terms of speed. Consequently, our study recommends DNN1 as the preferred method for obtaining quick and accurate ground state energies of molecules on current quantum hardware, particularly for quantum circuits with lower depth and fewer qubits.
We describe the contextual subspace variational quantum eigensolver (CS-VQE), a hybrid quantum-classical algorithm for approximating the ground state energy of a Hamiltonian. The approximation to the ground state energy is obtained as the sum of two contributions. The first contribution comes from a noncontextual approximation to the Hamiltonian, and is computed classically. The second contribution is obtained by using the variational quantum eigensolver (VQE) technique to compute a contextual correction on a quantum processor. In general the VQE computation of the contextual correction uses fewer qubits and measurements than the VQE computation of the original problem. Varying the number of qubits used for the contextual correction adjusts the quality of the approximation. We simulate CS-VQE on tapered Hamiltonians for small molecules, and find that the number of qubits required to reach chemical accuracy can be reduced by more than a factor of two. The number of terms required to compute the contextual correction can be reduced by more than a factor of ten, without the use of other measurement reduction schemes. This indicates that CS-VQE is a promising approach for eigenvalue computations on noisy intermediate-scale quantum devices.
Abstract Finding the ground-state energy of molecules is an important and challenging computational problem for which quantum computing can potentially find efficient solutions. The variational quantum eigensolver (VQE) is a quantum algorithm that tackles the molecular groundstate problem and is regarded as one of the flagships of quantum computing. Yet, to date, only very small molecules were computed via VQE, due to high noise levels in current quantum devices. Here we present an alternative variational quantum scheme that requires significantly less qubits than VQE. The reduction in the qubit number allows for shallower circuits to be sufficient, rendering the method more resistant to noise. The proposed algorithm, termed variational quantum selected-configuration-interaction (VQ-SCI), is based on: (a) representing the target groundstate as a superposition of Slater determinant configurations, encoded directly upon the quantum computational basis states; and (b) selecting a-priory only the most dominant configurations. This is demonstrated through a set of groundstate calculations of the H2, LiH, BeH2, H2O, NH3 and C2H4 molecules in the sto-3g basis set, performed on IBM quantum devices. We show that the VQ-SCI reaches the full configuration interaction energy within chemical accuracy using the lowest number of qubits reported to date. Moreover, when the SCI matrix is generated ‘on the fly’, the VQ-SCI requires exponentially less memory than classical SCI methods. This offers a potential remedy to a severe memory bottleneck problem in classical SCI calculations. Finally, the proposed scheme is general and can be straightforwardly applied for finding the groundstate of any Hermitian matrix, outside the chemical context.
We propose a divide-and-conquer method for the quantum-classical hybrid algorithm to solve larger problems with small-scale quantum computers.Specifically, we concatenate a variational quantum eigensolver (VQE) with a reduction in the system dimension, where the interactions between divided subsystems are taken as an effective Hamiltonian expanded by the reduced basis.Then the effective Hamiltonian is further solved by the VQE, which we call deep VQE.Deep VQE allows us to apply quantum-classical hybrid algorithms on small-scale quantum computers to large systems with strong intrasubsystem interactions and weak intersubsystem interactions, or strongly correlated spin models on large regular lattices.As proof-of-principle numerical demonstrations, we use the proposed method for quasi-one-dimensional models, including one-dimensionally coupled 12-qubit Heisenberg antiferromagnetic models on kagome lattices as well as two-dimensional Heisenberg antiferromagnetic models on square lattices.The largest problem size of 64 qubits is solved by simulating 20-qubit quantum computers with a reasonably good accuracy approximately a few %.The proposed scheme enables us to handle the problems of > 1000 qubits by concatenating VQEs with a few tens of qubits.While it is unclear how accurate ground-state energy can be obtained for such a large system, our numerical results on a 64-qubit system suggest that deep VQE provides a good approximation (discrepancy within a few percent) and has room for further improvement.Therefore, deep VQE provides us a promising pathway to solve practically important problems on noisy intermediate-scale quantum computers.