A novel quantum Otto heat engine that operates within a finite-time framework by incorporating measurement procedures is proposed. Departing from conventional quantum Otto heat engines, our model replaces the heat absorption process from a high-temperature source with invasive measurement. Moreover, we consider finite-time thermodynamic manipulation in each step. Our model focuses on exploring the effects of the angles of the measurement basis on the Bloch sphere and the timings of time-dependent evolutions on thermodynamic properties, with a specific emphasis on the trade-off between the power output and the efficiency. Our findings demonstrate that by carefully selecting specific parameters, the efficiency and overall performance of this heat engine can be significantly enhanced.
A novel quantum Otto heat engine that operates within a finite-time framework by incorporating measurement procedures is proposed. Departing from conventional quantum Otto heat engines, our model replaces the heat absorption process from a high-temperature source with invasive measurement. Moreover, we consider finite-time thermodynamic manipulation in each step. Our model focuses on exploring the effects of the angles of the measurement basis on the Bloch sphere and the timings of time-dependent evolutions on thermodynamic properties, with a specific emphasis on the trade-off between the power output and the efficiency. Our findings demonstrate that by carefully selecting specific parameters, the efficiency and overall performance of this heat engine can be significantly enhanced.
Measurement-based quantum heat engines have attracted significant interest as alternatives to conventional thermal engines, as they replace the hot thermal reservoir with quantum measurements, thereby offering greater controllability and simpler implementation. Motivated by these advantages, we investigate a measurement-driven quantum Otto engine with a qubit working substance and study the optimal work extractable from such engines, including whether their performance can surpass that of conventional quantum Otto cycles. We analyze the engine in both the infinite-time (adiabatic) and finite-time (non-adiabatic) regimes, considering two distinct implementations obtained through optimization over all projection-valued measurements (PVMs) and over all two-outcome positive operator-valued measurements (POVMs). We show that measurement-based engines can outperform conventional quantum Otto engines within specific parameter regimes and that POVM-based engines can yield higher optimal work extraction than PVM-based ones. Furthermore, by incorporating the thermodynamic cost associated with resetting the auxiliary system required for POVM implementation, we demonstrate that the resulting net work output can still exceed that of PVM-based engines under suitable conditions on the spectral gaps and cold bath temperature. We also identify regimes in which non-adiabatic implementations can yield higher work output and efficiency than their adiabatic counterparts. Our study provides operational guidelines for designing improved measurement-driven quantum Otto engines.
Recent advances in the study of thermodynamics of microscopic processes have driven the search for new developments in energy converters utilizing quantum effects. Here we propose a modified Otto cycle to design an engine fueled by quantum projective measurements. Standard quantum thermal machines operating in a finite-time regime with a driven Hamiltonian that does not commute at different times have their performance decreased by the presence of coherence, which is associated with a larger entropy production and irreversibility degree. However, we show that replacing the standard hot thermal reservoir by a projective measurement operation with a general basis in the Bloch sphere and controlling the basis angles suitably could improve the performance of the quantum engine as well as decrease the entropy change during the measurement process. Our results follow a generalization of quantum thermal machine models where the fuel comes from general sources beyond the standard thermal reservoir.
We have studied the performance of a measurement-based quantum Otto engine (QOE) in a working system of two spins coupled by Heisenberg anisotropic interaction. A nonselective quantum measurement fuels the engine. We have calculated thermodynamic quantities of the cycle in terms of the transition probabilities between the instantaneous energy eigenstates, and also between the instantaneous energy eigenstates and the basis states of the measurement, when the unitary stages of the cycle operate for a finite time τ. The efficiency attains a large value in the limit of τ→0 and then gradually reaches the adiabatic value in a long-time limit τ→∞. For finite values of τ and for anisotropic interaction, an oscillatory behavior of the efficiency of the engine is observed. This oscillation can be interpreted in terms of interference between the relevant transition amplitudes in the unitary stages of the engine cycle. Therefore, for a suitable choice of timing of the unitary processes in the short time regime, the engine can have a higher work output and less heat absorption, such that it works more efficiently than a quasistatic engine. In the case of an always-on heat bath, in a very short time, the bath has a negligible effect on its performance.
We present a quantum-heat engine model utilizing a dual spin-pair architecture, wherein an Otto-like cycle is implemented using a single heat bath. The conventional cold bath is replaced by a measurement protocol, enabling engine operation without the need for a second thermal reservoir. Unlike standard quantum-heat engines, our framework employs an ancillary spin pair in a two-dimensional configuration to regulate performance. Operating in finite time, the engine attains finite power, which is enhanced through quantum correlations, specifically correlation between spin pairs and projective measurements on the ancillary pair. The system consists of dual-qubit pairs, where one pair serves as the working medium and the other as an ancillary system facilitating measurement-induced heat exchange. We demonstrate that the engine efficiency can exceed the standard quantum Otto limit through local control of the ancillary pair while maintaining nonzero power output. Moreover, correlation between spin pairs enables efficiency modulation via the measurement basis, underscoring the role of quantum resources in optimizing quantum thermal machines.
To optimize the performance of a heat engine in a finite-time cycle, it is important to understand the finite-time effect of thermodynamic processes. Previously, we have shown that extra work is needed to complete a quantum adiabatic process in finite time, and proved that the extra work follows a C/τ^{2} scaling for long control time τ. There the oscillating part of the extra work is neglected due to the complex energy-level structure of the particular quantum system. However, such oscillation of the extra work cannot be neglected in some quantum systems with simple energy-level structure, e.g., the two-level system or the quantum harmonic oscillator. In this paper, we build the finite-time quantum Otto engine on these simple systems, and find that the oscillating extra work leads to a jagged edge in the constraint relation between the output power and the efficiency. By optimizing the control time of the adiabatic processes, the oscillation in the extra work is utilized to enhance the maximum power and the efficiency. We further design special control schemes with the zero extra work at the specific control time. Compared to the linear control scheme, these special control schemes of the finite-time adiabatic process improve the maximum power and the efficiency of the finite-time Otto engine.
Thermodynamic constraints impose a trade-off between power and efficiency in heat engines, preventing the simultaneous achievement of high power and high efficiency. For classical microscopic engines, explicit inequalities have been discovered, demonstrating the inherent inevitability of this power-efficiency trade-off. However, extensions of these results to quantum engines have so far been limited to cases of slow operation. In this study, we derive a power-efficiency trade-off relation for a paradigmatic quantum engine operating within a finite time, specifically the Otto cycle of a quantum harmonic oscillator. By utilizing a phase-space approach based on quasiprobability representations, we establish a universal trade-off relation applicable to arbitrary time-dependent protocols during the adiabatic processes. Our results reveal that the power of the quantum engine vanishes as the efficiency approaches the quantum-mechanical efficiency bound, which is stricter than the Carnot bound. Furthermore, we identify the conditions under which the upper bound is attained, which indicate maximum power is achieved when the generation of quantum coherence is reduced, and the difference in time durations of the isochoric processes increases. These findings are validated through numerical calculations, which confirm their applicability across various types of protocols for heat engine cycles.