We have studied the performance of a measurement-based quantum Otto engine (QOE) in a working system of two spins coupled by Heisenberg anisotropic interaction. A nonselective quantum measurement fuels the engine. We have calculated thermodynamic quantities of the cycle in terms of the transition probabilities between the instantaneous energy eigenstates, and also between the instantaneous energy eigenstates and the basis states of the measurement, when the unitary stages of the cycle operate for a finite time τ. The efficiency attains a large value in the limit of τ→0 and then gradually reaches the adiabatic value in a long-time limit τ→∞. For finite values of τ and for anisotropic interaction, an oscillatory behavior of the efficiency of the engine is observed. This oscillation can be interpreted in terms of interference between the relevant transition amplitudes in the unitary stages of the engine cycle. Therefore, for a suitable choice of timing of the unitary processes in the short time regime, the engine can have a higher work output and less heat absorption, such that it works more efficiently than a quasistatic engine. In the case of an always-on heat bath, in a very short time, the bath has a negligible effect on its performance.
We have studied the performance of a measurement-based quantum Otto engine (QOE) in a working system of two spins coupled by Heisenberg anisotropic interaction. A nonselective quantum measurement fuels the engine. We have calculated thermodynamic quantities of the cycle in terms of the transition probabilities between the instantaneous energy eigenstates, and also between the instantaneous energy eigenstates and the basis states of the measurement, when the unitary stages of the cycle operate for a finite time τ. The efficiency attains a large value in the limit of τ→0 and then gradually reaches the adiabatic value in a long-time limit τ→∞. For finite values of τ and for anisotropic interaction, an oscillatory behavior of the efficiency of the engine is observed. This oscillation can be interpreted in terms of interference between the relevant transition amplitudes in the unitary stages of the engine cycle. Therefore, for a suitable choice of timing of the unitary processes in the short time regime, the engine can have a higher work output and less heat absorption, such that it works more efficiently than a quasistatic engine. In the case of an always-on heat bath, in a very short time, the bath has a negligible effect on its performance.
We study quantum Otto thermal machines with a two-spin working system coupled by anisotropic interaction. Depending on the choice of different parameters, the quantum Otto cycle can function as different thermal machines, including a heat engine, refrigerator, accelerator, and heater. We aim to investigate how the anisotropy plays a fundamental role in the performance of the quantum Otto engine (QOE) operating in different timescales. We find that while the engine's efficiency increases with the increase in anisotropy for the quasistatic operation, quantum internal friction and incomplete thermalization degrade the performance in a finite-time cycle. Further, we study the quantum heat engine (QHE) with one of the spins (local spin) as the working system. We show that the efficiency of such an engine can surpass the standard quantum Otto limit, along with maximum power, thanks to the anisotropy. This can be attributed to quantum interference effects. We demonstrate that the enhanced performance of a local-spin QHE originates from the same interference effects, as in a measurement-based QOE for their finite-time operation.
Abstract The efficiency of a quantum heat engine is maximum when the unitary strokes of the quantum Otto cycle are adiabatic. On the other hand, this may not be always possible due to small energy gaps in the system, especially at the critical point (CP) where the gap between the ground state and the first excited state vanishes and the system gets excited. With the aim to regain this lost adiabaticity, we modify one of the unitary strokes of the Otto cycle by allowing the system to first evolve with a time dependent Hamiltonian as in the case of a usual Otto cycle, followed by an additional evolution with a different time independent Hamiltonian so that the system reaches a less excited state. This will help in increasing the magnitude of the heat absorbed from the hot bath so that the work output and efficiency of the engine can be increased. We demonstrate this method using an integrable model and a non-integrable model as the working medium and discuss the generality and limitations of this method. In the case of a two spin system, the optimal value for the time till which the system needs to be freely evolved is calculated analytically in the adiabatic limit. The results show that implementing this modified unitary stroke significantly improves the work output and efficiency of the engine, especially when it crosses the CP.
Measurement-based quantum heat engines have attracted significant interest as alternatives to conventional thermal engines, as they replace the hot thermal reservoir with quantum measurements, thereby offering greater controllability and simpler implementation. Motivated by these advantages, we investigate a measurement-driven quantum Otto engine with a qubit working substance and study the optimal work extractable from such engines, including whether their performance can surpass that of conventional quantum Otto cycles. We analyze the engine in both the infinite-time (adiabatic) and finite-time (non-adiabatic) regimes, considering two distinct implementations obtained through optimization over all projection-valued measurements (PVMs) and over all two-outcome positive operator-valued measurements (POVMs). We show that measurement-based engines can outperform conventional quantum Otto engines within specific parameter regimes and that POVM-based engines can yield higher optimal work extraction than PVM-based ones. Furthermore, by incorporating the thermodynamic cost associated with resetting the auxiliary system required for POVM implementation, we demonstrate that the resulting net work output can still exceed that of PVM-based engines under suitable conditions on the spectral gaps and cold bath temperature. We also identify regimes in which non-adiabatic implementations can yield higher work output and efficiency than their adiabatic counterparts. Our study provides operational guidelines for designing improved measurement-driven quantum Otto engines.
We present a quantum-heat engine model utilizing a dual spin-pair architecture, wherein an Otto-like cycle is implemented using a single heat bath. The conventional cold bath is replaced by a measurement protocol, enabling engine operation without the need for a second thermal reservoir. Unlike standard quantum-heat engines, our framework employs an ancillary spin pair in a two-dimensional configuration to regulate performance. Operating in finite time, the engine attains finite power, which is enhanced through quantum correlations, specifically correlation between spin pairs and projective measurements on the ancillary pair. The system consists of dual-qubit pairs, where one pair serves as the working medium and the other as an ancillary system facilitating measurement-induced heat exchange. We demonstrate that the engine efficiency can exceed the standard quantum Otto limit through local control of the ancillary pair while maintaining nonzero power output. Moreover, correlation between spin pairs enables efficiency modulation via the measurement basis, underscoring the role of quantum resources in optimizing quantum thermal machines.
To optimize the performance of a heat engine in a finite-time cycle, it is important to understand the finite-time effect of thermodynamic processes. Previously, we have shown that extra work is needed to complete a quantum adiabatic process in finite time, and proved that the extra work follows a C/τ^{2} scaling for long control time τ. There the oscillating part of the extra work is neglected due to the complex energy-level structure of the particular quantum system. However, such oscillation of the extra work cannot be neglected in some quantum systems with simple energy-level structure, e.g., the two-level system or the quantum harmonic oscillator. In this paper, we build the finite-time quantum Otto engine on these simple systems, and find that the oscillating extra work leads to a jagged edge in the constraint relation between the output power and the efficiency. By optimizing the control time of the adiabatic processes, the oscillation in the extra work is utilized to enhance the maximum power and the efficiency. We further design special control schemes with the zero extra work at the specific control time. Compared to the linear control scheme, these special control schemes of the finite-time adiabatic process improve the maximum power and the efficiency of the finite-time Otto engine.
We compare quantum Otto engines based on two different cycle models: a two-bath model, with a standard heat source and sink, and a measurement-based protocol, where the role of heat source is played by a quantum measurement. We furthermore study these cycles using two different "working substances": a single qutrit (spin-1 particle) or a pair of qubits (spin-1/2 particles) interacting via the XXZ Heisenberg interaction. Although both cycle models have the same efficiency when applied on a single-qubit working substance, we find that both can reach higher efficiencies using these more complex working substances by exploiting the existence of "idle" levels, i.e., levels that do not shift while the spins are subjected to a variable magnetic field. Furthermore, with an appropriate choice of measurement, the measurement-based protocol becomes more efficient than the two-bath model.