Abstract The interconnection bottleneck caused by limitations of cable number, inner space and cooling power of dilution refrigerators has been an outstanding challenge for building scalable superconducting quantum computers with the increasing number of qubits in quantum processors. To surmount such an obstacle, it is desirable to integrate qubits with quantum–classical interface (QCI) circuits based on rapid single flux quantum (RSFQ) circuits. In this work, a digital flux tuner for qubits (DFTQ) is proposed for manipulating flux of qubits as a crucial part of the interface circuit. A schematic diagram of the DFTQ is presented, consisting of a coarse tuning unit and a fine-tuning unit for providing magnetic flux with different precision to qubits. The method of using DFTQ to provide flux for gate operations is discussed from the optimization of circuit design and input signal. To verify the effectiveness of the method, simulations of a single DFTQ and quantum gates including a Z gate and an iSWAP gate with DFTQs are performed for flux-tunable transmons. The quantum process tomography corresponding to the two gates is also carried out to analyze the sources of gate error. The results of tomography show that the gate fidelities independent of the initial states of the Z gate and the iSWAP gate are 99.935% and 99.676%, respectively. With DFTQs inside, the QCI would be a powerful tool for building large-scale quantum computers.
Abstract The interconnection bottleneck caused by limitations of cable number, inner space and cooling power of dilution refrigerators has been an outstanding challenge for building scalable superconducting quantum computers with the increasing number of qubits in quantum processors. To surmount such an obstacle, it is desirable to integrate qubits with quantum–classical interface (QCI) circuits based on rapid single flux quantum (RSFQ) circuits. In this work, a digital flux tuner for qubits (DFTQ) is proposed for manipulating flux of qubits as a crucial part of the interface circuit. A schematic diagram of the DFTQ is presented, consisting of a coarse tuning unit and a fine-tuning unit for providing magnetic flux with different precision to qubits. The method of using DFTQ to provide flux for gate operations is discussed from the optimization of circuit design and input signal. To verify the effectiveness of the method, simulations of a single DFTQ and quantum gates including a Z gate and an iSWAP gate with DFTQs are performed for flux-tunable transmons. The quantum process tomography corresponding to the two gates is also carried out to analyze the sources of gate error. The results of tomography show that the gate fidelities independent of the initial states of the Z gate and the iSWAP gate are 99.935% and 99.676%, respectively. With DFTQs inside, the QCI would be a powerful tool for building large-scale quantum computers.
A device called the qubit energy tuner (QET), based on single flux quantum (SFQ) circuits, has been proposed for Z control of superconducting qubits. The QET is created by improving flux digital-to-analog converters (flux DACs). It can set the energy levels or frequencies of qubits, particularly flux-tunable transmons, and perform gate operations requiring Z control. The circuit structure of the QET is elucidated, consisting of an inductor loop and flux bias units for coarse or fine-tuning. The key feature of the QET is analyzed to understand how SFQ pulses change the inductor loop current, which provides external flux for qubits. Three simulations were performed to verify QET functionality. The first simulation verified the responses of the inductor loop current to SFQ pulses, showing a relative deviation of approximately 4.259% between the analytical solutions of the inductor loop current and the solutions from the WRSpice time-domain simulation. The second and third simulations, using QuTip, demonstrated how to perform a Z gate and an iSWAP gate using the QET, respectively, with corresponding fidelities of 99.99884% and 99.93906% for only one gate operation to specific initial states. These simulations indicate that the SFQ-based QET could act as an efficient component of SFQ-based quantum–classical interfaces for digital Z control of large-scale superconducting quantum computers.
Current superconducting quantum computers (QC) rely on a brute-force scaling approach where quantum chips operating at the millikelvin stage inside dilution refrigerators are connected to room-temperature electronics via an ever-increasing number of signal wires. In order to drastically scale up such systems without facing refrigeration challenges, these quantum interface electronics need to be integrated at cryogenic temperatures, ideally at the same stage as qubits. In this paper, we show that, by employing energy-efficient digital superconducting microchips based on single flux quantum (SFQ) technology, all essential functions to operate a full stack quantum computer can be integrated at 10 mK. They include digital qubit charge control and magnetic flux control for single- and two-qubit gates, as well as digital qubit readout.
Single-flux-quantum (SFQ) digital circuitry has great potential in building a scalable control system of superconducting qubits. In this work, we describe a practical SFQ-based two-qubit gate for transmon qubits. The controlled-Z (CZ) gate is activated by near-resonant SFQ-pulse trains near the target transition involving the second excited state. Numerical simulations show that the fidelity of a SFQ-activated CZ gate in excess of 99.9% is achievable within 100-ns gate time. We evaluate the CZ gate error caused by leakage and SFQ-pulse width. Combined with the proposed feasible expansion methods, this work is a supplement to the scalable and integratable superconducting-qubit control system based on SFQ digital logic.
Scalability of today’s superconducting quantum computers is limited due to the huge costs of generating/routing microwave control pulses per qubit from room temperature. One active research area in both industry and academia is to push the classical controllers to the dilution refrigerator in order to increase the scalability of quantum computers. Superconducting Single Flux Quantum (SFQ) is a classical logic technology with low power consumption and ultra-high speed, and thus is a promising candidate for in-fridge classical controllers with maximized scalability. Prior work has demonstrated high-fidelity SFQ-based single-qubit gates. However, little research has been done on SFQ-based multi-qubit gates, which are necessary to realize SFQ-based universal quantum computing.In this paper, we present the first thorough analysis of SFQ-based two-qubit gates. Our observations show that SFQ-based two-qubit gates tend to have high leakage to qubit non-computational subspace, which presents severe design challenges. We show that despite these challenges, we can realize gates with high fidelity by carefully designing optimal control methods and qubit architectures. We develop optimal control methods that suppress leakage, and also investigate various qubit architectures that reduce the leakage. After carefully engineering our SFQ-friendly quantum system, we show that it can achieve similar gate fidelity and gate time to microwave-based quantum systems. The promising results of this paper show that (1) SFQ-based universal quantum computation is both feasible and effective; and (2) SFQ is a promising approach in designing classical controller for quantum machines because it can increase the scalability while preserving gate fidelity and performance.
We report on the development and test of an integrated system composed of a flux qubit and a rapid single-flux quantum (RSFQ) circuit that allows qubit manipulation. The goal is to demonstrate the feasibility of control electronics integrated on the same chip as the qubit, in view of the application in quantum computation with superconducting devices. RSFQ logic relies on the storage and transmission of magnetic flux quanta and can be profitably used with superconducting qubits because of the speed, scalability, compatibility with the qubit fabrication process and low temperature environment. While standard RSFQ circuitry is well assessed, the application to quantum computing requires a complete rescaling of parameter values, in order to preserve the qubit coherence and reduce the power dissipation. In the system presented in this paper, the qubit role is played by a superconducting loop interrupted by a small dc SQUID, usually called a double SQUID, which behaves as a tunable rf-SQUID. Its energy potential has the shape of a double well, with the barrier between the wells controlled by magnetic flux applied to the inner dc SQUID. Here for the first time we report measurements at a base temperature of 370 mK in which flux control pulses with desired characteristics were supplied by a RSFQ circuit fabricated using non-standard parameters in the same chip as the qubit.
Quantum processors have the potential to accelerate specific computing tasks but are difficult to scale up due to engineering limitations, such as the number of available cables and cooling power for dilution refrigerators for quantum bits (qubits). Hence, it is very important to develop scalable, energy-efficient interface circuits that can control many qubits via a few control lines inside a dilution refrigerator. One of the most important interface circuits is the flux controller (FC), which generates arbitrary dc flux bias to adjust the characteristics of component devices such as qubits. In this paper, we propose and demonstrate FCs using an energy-efficient superconductor logic family, adiabatic quantum-flux-parametron (AQFP) logic. We develop two types of FCs: the AQFP FC and the AQFP/single-flux-quantum (AQFP/SFQ) FC. Both FCs require only a few control lines and have extremely small power dissipation, thus exhibiting high scalability. Furthermore, the AQFP/SFQ FC can control flux bias using ballistic SFQ transmission, which is crucial for integration with qubits. As a proof of concept, we demonstrate AQFP and AQFP/SFQ FCs at 4.2 K, fabricated by the AIST high-speed standard process. Our results indicate that AQFP logic is highly suitable for use as qubit interface circuits for very large-scale quantum processors, especially from the viewpoint of the control line count, power dissipation, and amount of supply currents.