© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

Superconductor Science and Technology

Rapid single-flux quantum control of the energy potential in a double SQUID qubit circuit

Maria Gabriella Castellano, F. Chiarello, Roberto Leoni, G. Torrioli, Pasquale Carelli, C. Cosmelli, M. Khabipov, Alexander B Zorin, D Balashov

Published May 3, 2007• 16 citations

Abstract

We report on the development and test of an integrated system composed of a flux qubit and a rapid single-flux quantum (RSFQ) circuit that allows qubit manipulation. The goal is to demonstrate the feasibility of control electronics integrated on the same chip as the qubit, in view of the application in quantum computation with superconducting devices. RSFQ logic relies on the storage and transmission of magnetic flux quanta and can be profitably used with superconducting qubits because of the speed, scalability, compatibility with the qubit fabrication process and low temperature environment. While standard RSFQ circuitry is well assessed, the application to quantum computing requires a complete rescaling of parameter values, in order to preserve the qubit coherence and reduce the power dissipation. In the system presented in this paper, the qubit role is played by a superconducting loop interrupted by a small dc SQUID, usually called a double SQUID, which behaves as a tunable rf-SQUID. Its energy potential has the shape of a double well, with the barrier between the wells controlled by magnetic flux applied to the inner dc SQUID. Here for the first time we report measurements at a base temperature of 370 mK in which flux control pulses with desired characteristics were supplied by a RSFQ circuit fabricated using non-standard parameters in the same chip as the qubit.

DOI: 10.1088/0953-2048/20/6/003

Related papers

Squid Qubits for Quantum Computers

M. J. Feldman

Our aim was to develop the concepts and perform the experiments to establish a clear path towards useful quantum coherent computation using superconducting flux-based qubits. We have concentrated upon using superconducting single flux quantum (SFQ) circuitry integrated on the qubit chip to act as the interface between a quantum circuit and laboratory electronics. We have developed SFQ circuits for initialization and for read-out of the quantum state of a qubit; for precise timing of duration and exact biasing all with picosecond-scale precision. We developed a set of techniques to design such qubit control circuitry while preserving proper isolation (not significantly contributing to decoherence). We also designed an SFQ experiment to investigate quantum behavior using foundry-fabricated chips at higher temperatures. We acquired and custom set-up a He3 refrigerator, and demonstrated SFQ circuit functionality at 300 mK for the first time. We have investigated a new method for quantum control both analytically and numerically, using isolated SFQ pulses instead of resonant excitation, and shown that the minimum operation time can be dramatically decreased ii some cases. However, the complete lack of custom fabrication has prevented us from making progress towards our experimental goals.

•Dec 6, 2001•0 citations

Tuning an rf-SQUID flux qubit system＇s potential with magnetic flux bias

花涛, 许伟伟, 史建新 +4 more

At an extremely low temperature of 20 mK, we measured the loop current in a tunable rf superconducting quantum interference device (SQUID) with a dc-SQUID. By adjusting the magnetic flux applied to the rf-SQUID loop (Φ f ) and the small dc-SQUID (Φ cjj f ), respectively, the potential shape of the system can be fully controlled in situ. Variation in the transition step and overlap size in the switching current with a barrier flux bias are analyzed, from which we can obtain some relevant device parameters and build a model to explain the experimental phenomenon.

中国物理B：英文版•Jan 1, 2012•0 citations

Tuning an rf-SQUID flux qubit system's potential with magnetic flux bias

Tao Hua, Weiwei Xu, Jianxin Shi +4 more

At an extremely low temperature of 20 mK, we measured the loop current in a tunable rf superconducting quantum interference device (SQUID) with a dc-SQUID. By adjusting the magnetic flux applied to the rf-SQUID loop ( Φ f ) and the small dc-SQUID ( Φ f cjj ), respectively, the potential shape of the system can be fully controlled in situ . Variation in the transition step and overlap size in the switching current with a barrier flux bias are analyzed, from which we can obtain some relevant device parameters and build a model to explain the experimental phenomenon.

Chinese Physics B•Sep 1, 2012•4 citations

Low power single flux quantum qubit control circuit without high-frequency input

Bicong Weng, Wei Peng, Jie Ren

Abstract The use of high-frequency input signals from room-temperature microwave sources makes it difficult to scale up the number of quantum bits in universal quantum computers. To address this issue, superconducting single flux quantum (SFQ) integrated circuits are being explored as suitable candidates for qubit manipulation in universal quantum computers. This paper deals with a scalable SFQ qubit control circuit (SQCC) structure that requires only low-frequency input. The circuit mainly consists of a pulse generator and a counter, that output the SFQ pulse train with adjustable frequency and a controllable number of pulses, which is applicable to control single-qubit Clifford operations. The design of low-voltage rapid single flux quantum (LV-RSFQ) and energy-efficient rapid single flux quantum (ERSFQ) for the SQCC achieves low power consumption and provides a basis for scaling up SQCC to control more qubits. The proposed circuits are fabricated under the SIMIT-Nb03 process and successfully pass test verification. The achieved test results reveal that the adjustable output frequency ranges of the SQCC based on the LV-RSFQ and ERSFQ designs in order are [2.40, 8.11] GHz and [4.81, 5.14] GHz. In the operating frequency range, the circuit is able to generate the correct number of SFQ pulses under control. The controllable number range is from 1 to 128. When the circuits operate at 5 GHz, the total power consumptions of the above circuits in order are 23.88 μW and 6.2 μW. All input signals are low-frequency signals, which frees the control of large-scale qubits from limitations caused by high-frequency inputs produced by room-temperature microwave sources.

Superconductor Science and Technology•Jul 11, 2023•4 citations

Low-Jc Rapid Single Flux Quantum (RSFQ) Qubit Control Circuit

Thomas Ohki, Michael Wulf, M. J. Feldman

We designed a 30 A/cm2RSFQ-qubit control circuit and tested operation at 4 K. The integration of RSFQ technology and qubits monolithically requires great attention to thermal budgeting and electromagnetic compatibility. These issues are of primary concern when developing an RSFQ-qubit experiment. The interface of an SFQ circuit to a qubit requires tunable coupling since RSFQ inherently limits logical elements to single-flux storage. By measuring the quantum-tunneling rate of a phase qubit, we can determine the effect of changing the coupling strength between the classical and quantum systems. By looking at the same system, we can diagnose the impact, whether thermal or electromagnetic, of an active digital circuit. These tests would set an upper bound on the deleterious effects of monolithic integration.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•8 citations

Flux qubit interaction with rapid single-flux quantum logic circuits: Control and readout

N. V. Klenov, A. V. Kuznetsov, Igor I. Soloviev +3 more

We present the results of an analytical study and numerical simulation of the dynamics of a superconducting three-Josephson-junction (3JJ) flux qubit magnetically coupled with rapid single-flux quantum (RSFQ) logic circuit, which demonstrate the fundamental possibility of implementing the simplest logic operations at picosecond times, as well as rapid non-destructive readout. It is shown that when solving optimization problems, the qubit dynamics can be conveniently interpreted as a precession of the magnetic moment vector around the direction of the magnetic field. In this case, the role of magnetic field components is played by combinations of the Hamiltonian matrix elements, and the role of the magnetic moment is played by the Bloch vector. Features of the 3JJ qubit model are discussed during the analysis of how the qubit is affected by exposure to a short control pulse, as are the similarities between the Bloch and Landau-Lifshitz-Gilbert equations. An analysis of solutions to the Bloch equations made it possible to develop recommendations for the use of readout RSFQ circuits in implementing an optimal interface between the classical and quantum parts of the computer system, as well as to justify the use of single-quantum logic in order to control superconducting quantum circuits on a chip.

Low Temperature Physics•Jul 1, 2017•21 citations

We report on the development and test of an integrated system composed of a flux qubit and a rapid single-flux quantum (RSFQ) circuit that allows qubit manipulation. The goal is to demonstrate the feasibility of control electronics integrated on the same chip as the qubit, in view of the application in quantum computation with superconducting devices. RSFQ logic relies on the storage and transmission of magnetic flux quanta and can be profitably used with superconducting qubits because of the speed, scalability, compatibility with the qubit fabrication process and low temperature environment. While standard RSFQ circuitry is well assessed, the application to quantum computing requires a complete rescaling of parameter values, in order to preserve the qubit coherence and reduce the power dissipation. In the system presented in this paper, the qubit role is played by a superconducting loop interrupted by a small dc SQUID, usually called a double SQUID, which behaves as a tunable rf-SQUID. Its energy potential has the shape of a double well, with the barrier between the wells controlled by magnetic flux applied to the inner dc SQUID. Here for the first time we report measurements at a base temperature of 370 mK in which flux control pulses with desired characteristics were supplied by a RSFQ circuit fabricated using non-standard parameters in the same chip as the qubit.

Our aim was to develop the concepts and perform the experiments to establish a clear path towards useful quantum coherent computation using superconducting flux-based qubits. We have concentrated upon using superconducting single flux quantum (SFQ) circuitry integrated on the qubit chip to act as the interface between a quantum circuit and laboratory electronics. We have developed SFQ circuits for initialization and for read-out of the quantum state of a qubit; for precise timing of duration and exact biasing all with picosecond-scale precision. We developed a set of techniques to design such qubit control circuitry while preserving proper isolation (not significantly contributing to decoherence). We also designed an SFQ experiment to investigate quantum behavior using foundry-fabricated chips at higher temperatures. We acquired and custom set-up a He3 refrigerator, and demonstrated SFQ circuit functionality at 300 mK for the first time. We have investigated a new method for quantum control both analytically and numerically, using isolated SFQ pulses instead of resonant excitation, and shown that the minimum operation time can be dramatically decreased ii some cases. However, the complete lack of custom fabrication has prevented us from making progress towards our experimental goals.

At an extremely low temperature of 20 mK, we measured the loop current in a tunable rf superconducting quantum interference device (SQUID) with a dc-SQUID. By adjusting the magnetic flux applied to the rf-SQUID loop (Φ f ) and the small dc-SQUID (Φ cjj f ), respectively, the potential shape of the system can be fully controlled in situ. Variation in the transition step and overlap size in the switching current with a barrier flux bias are analyzed, from which we can obtain some relevant device parameters and build a model to explain the experimental phenomenon.

At an extremely low temperature of 20 mK, we measured the loop current in a tunable rf superconducting quantum interference device (SQUID) with a dc-SQUID. By adjusting the magnetic flux applied to the rf-SQUID loop ( Φ f ) and the small dc-SQUID ( Φ f cjj ), respectively, the potential shape of the system can be fully controlled in situ . Variation in the transition step and overlap size in the switching current with a barrier flux bias are analyzed, from which we can obtain some relevant device parameters and build a model to explain the experimental phenomenon.

Abstract The use of high-frequency input signals from room-temperature microwave sources makes it difficult to scale up the number of quantum bits in universal quantum computers. To address this issue, superconducting single flux quantum (SFQ) integrated circuits are being explored as suitable candidates for qubit manipulation in universal quantum computers. This paper deals with a scalable SFQ qubit control circuit (SQCC) structure that requires only low-frequency input. The circuit mainly consists of a pulse generator and a counter, that output the SFQ pulse train with adjustable frequency and a controllable number of pulses, which is applicable to control single-qubit Clifford operations. The design of low-voltage rapid single flux quantum (LV-RSFQ) and energy-efficient rapid single flux quantum (ERSFQ) for the SQCC achieves low power consumption and provides a basis for scaling up SQCC to control more qubits. The proposed circuits are fabricated under the SIMIT-Nb03 process and successfully pass test verification. The achieved test results reveal that the adjustable output frequency ranges of the SQCC based on the LV-RSFQ and ERSFQ designs in order are [2.40, 8.11] GHz and [4.81, 5.14] GHz. In the operating frequency range, the circuit is able to generate the correct number of SFQ pulses under control. The controllable number range is from 1 to 128. When the circuits operate at 5 GHz, the total power consumptions of the above circuits in order are 23.88 μW and 6.2 μW. All input signals are low-frequency signals, which frees the control of large-scale qubits from limitations caused by high-frequency inputs produced by room-temperature microwave sources.

We designed a 30 A/cm2RSFQ-qubit control circuit and tested operation at 4 K. The integration of RSFQ technology and qubits monolithically requires great attention to thermal budgeting and electromagnetic compatibility. These issues are of primary concern when developing an RSFQ-qubit experiment. The interface of an SFQ circuit to a qubit requires tunable coupling since RSFQ inherently limits logical elements to single-flux storage. By measuring the quantum-tunneling rate of a phase qubit, we can determine the effect of changing the coupling strength between the classical and quantum systems. By looking at the same system, we can diagnose the impact, whether thermal or electromagnetic, of an active digital circuit. These tests would set an upper bound on the deleterious effects of monolithic integration.

We present the results of an analytical study and numerical simulation of the dynamics of a superconducting three-Josephson-junction (3JJ) flux qubit magnetically coupled with rapid single-flux quantum (RSFQ) logic circuit, which demonstrate the fundamental possibility of implementing the simplest logic operations at picosecond times, as well as rapid non-destructive readout. It is shown that when solving optimization problems, the qubit dynamics can be conveniently interpreted as a precession of the magnetic moment vector around the direction of the magnetic field. In this case, the role of magnetic field components is played by combinations of the Hamiltonian matrix elements, and the role of the magnetic moment is played by the Bloch vector. Features of the 3JJ qubit model are discussed during the analysis of how the qubit is affected by exposure to a short control pulse, as are the similarities between the Bloch and Landau-Lifshitz-Gilbert equations. An analysis of solutions to the Bloch equations made it possible to develop recommendations for the use of readout RSFQ circuits in implementing an optimal interface between the classical and quantum parts of the computer system, as well as to justify the use of single-quantum logic in order to control superconducting quantum circuits on a chip.