Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2202.01411 · IEEE International Conference on Quantum Computing and Engineering (QCE)

Practical implications of SFQ-based two-qubit gates

Mohammad Reza Jokar, Richard Rines, Frederic T. Chong

Published Oct 1, 2021• 7 citations
arXivHTMLPDF

Abstract

Scalability of today’s superconducting quantum computers is limited due to the huge costs of generating/routing microwave control pulses per qubit from room temperature. One active research area in both industry and academia is to push the classical controllers to the dilution refrigerator in order to increase the scalability of quantum computers. Superconducting Single Flux Quantum (SFQ) is a classical logic technology with low power consumption and ultra-high speed, and thus is a promising candidate for in-fridge classical controllers with maximized scalability. Prior work has demonstrated high-fidelity SFQ-based single-qubit gates. However, little research has been done on SFQ-based multi-qubit gates, which are necessary to realize SFQ-based universal quantum computing.In this paper, we present the first thorough analysis of SFQ-based two-qubit gates. Our observations show that SFQ-based two-qubit gates tend to have high leakage to qubit non-computational subspace, which presents severe design challenges. We show that despite these challenges, we can realize gates with high fidelity by carefully designing optimal control methods and qubit architectures. We develop optimal control methods that suppress leakage, and also investigate various qubit architectures that reduce the leakage. After carefully engineering our SFQ-friendly quantum system, we show that it can achieve similar gate fidelity and gate time to microwave-based quantum systems. The promising results of this paper show that (1) SFQ-based universal quantum computation is both feasible and effective; and (2) SFQ is a promising approach in designing classical controller for quantum machines because it can increase the scalability while preserving gate fidelity and performance.

DOI
10.1109/qce52317.2021.00061

Related papers

DigiQ: A Scalable Digital Controller for Quantum Computers Using SFQ Logic

Mohammad Reza Jokar, Richard Rines, Ghasem Pasandi +5 more

The control of cryogenic qubits in today’s super-conducting quantum computer prototypes presents significant scalability challenges due to the massive costs of generating/routing the analog control signals that need to be sent from a classical controller at room temperature to the quantum chip inside the dilution refrigerator. Thus, researchers in industry and academia have focused on designing in-fridge classical controllers in order to mitigate these challenges. Due to the maturity of CMOS logic, many industrial efforts (Microsoft, Intel) have focused on Cryo-CMOS as a near-term solution to design in-fridge classical controllers. Meanwhile, Supercon-ducting Single Flux Quantum (SFQ) is an alternative, less mature classical logic family proposed for large-scale in-fridge controllers. SFQ logic has the potential to maximize scalability thanks to its ultra-high speed and very low power consumption. However, architecture design for SFQ logic poses challenges due to its unconventional pulse-driven nature and lack of dense memory and logic. Thus, research at the architecture level is essential to guide architects to design SFQ-based classical controllers for large-scale quantum machines.In this paper, we present DigiQ, the first system-level design of a Noisy Intermediate Scale Quantum (NISQ)-friendly SFQ-based classical controller. We perform a design space exploration of SFQ-based controllers and co-design the quantum gate decompositions and SFQ-based implementation of those decompositions to find an optimal SFQ-friendly design point that trades area and power for latency and control while ensuring good quantum algorithmic performance. Our co-design results in a single instruction, multiple data (SIMD) controller architecture, which has high scalability, but imposes new challenges on the calibration of control pulses. We present software-level solutions to address these challenges, which if unaddressed would degrade quantum circuit fidelity given the imperfections of qubit hardware.To validate and characterize DigiQ, we first implement it using hardware description languages and synthesize it using state-of-the-art/validated SFQ synthesis tools. Our synthesis results show that DigiQ can operate within the tight power and area budget of dilution refrigerators at >42,000-qubit scales. Second, we confirm the effectiveness of DigiQ in running quantum algorithms by modeling the execution time and fidelity of a variety of NISQ applications. We hope that the promising results of this paper motivate experimentalists to further explore SFQ-based quantum controllers to realize large-scale quantum machines with maximized scalability.

arXiv:2202.01407•IEEE International Symposium on High-Performance Computer Architecture (HPCA)•Apr 1, 2022•37 citations

Coherence-limited digital control of a superconducting qubit using a Josephson pulse generator at 3 K

M. A. Castellanos-Beltran, A. J. Sirois, L. Howe +4 more

Compared to traditional semiconductor control electronics (TSCE) located at room temperature, cryogenic single flux quantum (SFQ) electronics can provide qubit measurement and control alternatives that address critical issues related to scalability of cryogenic quantum processors. Single-qubit control and readout have been demonstrated recently using SFQ circuits coupled to superconducting qubits. Experiments where the SFQ electronics are co-located with the qubit have suffered from excess decoherence and loss due to quasiparticle poisoning of the qubit. A previous experiment by our group showed that moving the control electronics to the 3 K stage of the dilution refrigerator avoided this source of decoherence in a high-coherence 3D transmon geometry. In this paper, we also generate the pulses at the 3 K stage but have optimized the qubit design and control lines for scalable 2D transmon devices. We directly compare the qubit lifetime $T_1$, coherence time $T_2^*$ and gate fidelity when the qubit is controlled by the Josephson pulse generator (JPG) circuit versus the TSCE setup. We find agreement to within the daily fluctuations for $T_1$ and $T_2^*$, and agreement to within 10% for randomized benchmarking. We also performed interleaved randomized benchmarking on individual JPG gates demonstrating an average error per gate of $0.46$% showing good agreement with what is expected based on the qubit coherence and higher-state leakage. These results are an order of magnitude improvement in gate fidelity over our previous work and demonstrate that a Josephson microwave source operated at 3 K is a promising component for scalable qubit control.

quant-pharXiv:2512.07962•Applied Physics Letters•Dec 10, 2025•11 citations

Compact pulse schedules for high-fidelity single-flux quantum qubit control

Ross Shillito, Florian Hopfmueller, Bohdan Kulchytskyy +1 more

In the traditional approach to controlling superconducting qubits using microwave pulses, the field of pulse shaping has emerged in order to assist in the removal of leakage and increase gate fidelity. However, the challenge of scaling microwave control electronics has created an opportunity to explore alternative methods such as single-flux quantum (SFQ) pulses. For qubits controlled by SFQ pulses, high fidelity gates can be achieved by optimizing the binary control sequence. We extend the notion of the derivative removal by adiabatic gate (DRAG) framework a transmon qubit controlled by SFQ drivers. The proposed implementation of SFQ pulse sequences can be stored in 22 bits or fewer, with gate fidelities exceeding 99.99%. This modest memory requirement could help reduce the footprint of the SFQ coprocessors and power dissipation while preserving their inherent advantages of scalability and cost-effectiveness.

arXiv:2309.04606•Physical Review Applied•May 13, 2025•4 citations

Single-Flux-Quantum-Activated Controlled- Z Gate for Transmon Qubits

Yifeng Wang, Wei Gao, Kaihui Liu +3 more

Single-flux-quantum (SFQ) digital circuitry has great potential in building a scalable control system of superconducting qubits. In this work, we describe a practical SFQ-based two-qubit gate for transmon qubits. The controlled-$Z$ (CZ) gate is activated by near-resonant SFQ-pulse trains near the target transition involving the second excited state. Numerical simulations show that the fidelity of a SFQ-activated CZ gate in excess of 99.9% is achievable within 100-ns gate time. We evaluate the CZ gate error caused by leakage and SFQ-pulse width. Combined with the proposed feasible expansion methods, this work is a supplement to the scalable and integratable superconducting-qubit control system based on SFQ digital logic.

Physical Review Applied•Apr 11, 2023•10 citations

SFQ-Driven Pulse-Phase Sequence Generator for Superconducting Qubit Control

Meriam Gay Bautista, Patricia Gonzalez-Guerrero, Anastasiia Butko

The convergence of quantum computing and high-performance computing (HPC) necessitates innovative approaches to qubit control and coherence for scalable quantum systems. In this work, we explore the integration of superconducting Single-Flux Quantum (SFQ) digital circuits to enhance quantum state manipulation, leveraging their potential for high-speed, energy-efficient classical control. Our approach maps SFQ pulse trains and configurable SFQ-based switches to discrete phase shifts, enabling efficient qubit state transformations with minimal decoherence overhead. We introduce a classically driven SFQ-based quantum gate implementation, where SFQ pulses orchestrate the state evolution of qubits. To support dynamic and flexible qubit control within hybrid quantum-HPC architectures, we design and implement a multi-frequency SFQ pulse generator, capable of generating tailored pulse sequences that seamlessly interface with SQUID-based resonator-qubit cavities. This work demonstrates a promising path toward integrating quantum accelerators with classical HPC infrastructure, opti-mizing quantum-classical workflows, and enabling scalable, high-performance quantum computation.

IEEE International Symposium on Parallel & Distributed Processing, Workshops and Phd Forum•Jun 3, 2025•1 citation

Speeding up qubit control with bipolar single-flux-quantum pulse sequences

Vsevolod A. Vozhakov, M. V. Bastrakova, N. V. Klenov +2 more

Abstract The development of quantum computers based on superconductors requires the improvement of the qubit state control approach aimed at the increase of the hardware energy efficiency. A promising solution to this problem is the use of superconducting digital circuits operating with single-flux-quantum (SFQ) pulses, moving the qubit control system into the cold chamber. However, the qubit gate time under SFQ control is still longer than under conventional microwave driving. Here we introduce the bipolar SFQ pulse control based on ternary pulse sequences. We also develop a robust optimization algorithm for finding a sequence structure that minimizes the leakage of the transmon qubit state from the computational subspace. We show that the appropriate sequence can be found for arbitrary system parameters from the practical range. The proposed bipolar SFQ control reduces a single qubit gate time by halve compared to nowadays unipolar SFQ technique, while maintaining the gate fidelity over 99.99%.

arXiv:2310.11484•Quantum Science and Technology•May 30, 2023•15 citations
Scalability of today’s superconducting quantum computers is limited due to the huge costs of generating/routing microwave control pulses per qubit from room temperature. One active research area in both industry and academia is to push the classical controllers to the dilution refrigerator in order to increase the scalability of quantum computers. Superconducting Single Flux Quantum (SFQ) is a classical logic technology with low power consumption and ultra-high speed, and thus is a promising candidate for in-fridge classical controllers with maximized scalability. Prior work has demonstrated high-fidelity SFQ-based single-qubit gates. However, little research has been done on SFQ-based multi-qubit gates, which are necessary to realize SFQ-based universal quantum computing.In this paper, we present the first thorough analysis of SFQ-based two-qubit gates. Our observations show that SFQ-based two-qubit gates tend to have high leakage to qubit non-computational subspace, which presents severe design challenges. We show that despite these challenges, we can realize gates with high fidelity by carefully designing optimal control methods and qubit architectures. We develop optimal control methods that suppress leakage, and also investigate various qubit architectures that reduce the leakage. After carefully engineering our SFQ-friendly quantum system, we show that it can achieve similar gate fidelity and gate time to microwave-based quantum systems. The promising results of this paper show that (1) SFQ-based universal quantum computation is both feasible and effective; and (2) SFQ is a promising approach in designing classical controller for quantum machines because it can increase the scalability while preserving gate fidelity and performance.
The control of cryogenic qubits in today’s super-conducting quantum computer prototypes presents significant scalability challenges due to the massive costs of generating/routing the analog control signals that need to be sent from a classical controller at room temperature to the quantum chip inside the dilution refrigerator. Thus, researchers in industry and academia have focused on designing in-fridge classical controllers in order to mitigate these challenges. Due to the maturity of CMOS logic, many industrial efforts (Microsoft, Intel) have focused on Cryo-CMOS as a near-term solution to design in-fridge classical controllers. Meanwhile, Supercon-ducting Single Flux Quantum (SFQ) is an alternative, less mature classical logic family proposed for large-scale in-fridge controllers. SFQ logic has the potential to maximize scalability thanks to its ultra-high speed and very low power consumption. However, architecture design for SFQ logic poses challenges due to its unconventional pulse-driven nature and lack of dense memory and logic. Thus, research at the architecture level is essential to guide architects to design SFQ-based classical controllers for large-scale quantum machines.In this paper, we present DigiQ, the first system-level design of a Noisy Intermediate Scale Quantum (NISQ)-friendly SFQ-based classical controller. We perform a design space exploration of SFQ-based controllers and co-design the quantum gate decompositions and SFQ-based implementation of those decompositions to find an optimal SFQ-friendly design point that trades area and power for latency and control while ensuring good quantum algorithmic performance. Our co-design results in a single instruction, multiple data (SIMD) controller architecture, which has high scalability, but imposes new challenges on the calibration of control pulses. We present software-level solutions to address these challenges, which if unaddressed would degrade quantum circuit fidelity given the imperfections of qubit hardware.To validate and characterize DigiQ, we first implement it using hardware description languages and synthesize it using state-of-the-art/validated SFQ synthesis tools. Our synthesis results show that DigiQ can operate within the tight power and area budget of dilution refrigerators at >42,000-qubit scales. Second, we confirm the effectiveness of DigiQ in running quantum algorithms by modeling the execution time and fidelity of a variety of NISQ applications. We hope that the promising results of this paper motivate experimentalists to further explore SFQ-based quantum controllers to realize large-scale quantum machines with maximized scalability.
Compared to traditional semiconductor control electronics (TSCE) located at room temperature, cryogenic single flux quantum (SFQ) electronics can provide qubit measurement and control alternatives that address critical issues related to scalability of cryogenic quantum processors. Single-qubit control and readout have been demonstrated recently using SFQ circuits coupled to superconducting qubits. Experiments where the SFQ electronics are co-located with the qubit have suffered from excess decoherence and loss due to quasiparticle poisoning of the qubit. A previous experiment by our group showed that moving the control electronics to the 3 K stage of the dilution refrigerator avoided this source of decoherence in a high-coherence 3D transmon geometry. In this paper, we also generate the pulses at the 3 K stage but have optimized the qubit design and control lines for scalable 2D transmon devices. We directly compare the qubit lifetime T1T_1T1​, coherence time T2∗T_2^*T2∗​ and gate fidelity when the qubit is controlled by the Josephson pulse generator (JPG) circuit versus the TSCE setup. We find agreement to within the daily fluctuations for T1T_1T1​ and T2∗T_2^*T2∗​, and agreement to within 10% for randomized benchmarking. We also performed interleaved randomized benchmarking on individual JPG gates demonstrating an average error per gate of 0.460.460.46% showing good agreement with what is expected based on the qubit coherence and higher-state leakage. These results are an order of magnitude improvement in gate fidelity over our previous work and demonstrate that a Josephson microwave source operated at 3 K is a promising component for scalable qubit control.
In the traditional approach to controlling superconducting qubits using microwave pulses, the field of pulse shaping has emerged in order to assist in the removal of leakage and increase gate fidelity. However, the challenge of scaling microwave control electronics has created an opportunity to explore alternative methods such as single-flux quantum (SFQ) pulses. For qubits controlled by SFQ pulses, high fidelity gates can be achieved by optimizing the binary control sequence. We extend the notion of the derivative removal by adiabatic gate (DRAG) framework a transmon qubit controlled by SFQ drivers. The proposed implementation of SFQ pulse sequences can be stored in 22 bits or fewer, with gate fidelities exceeding 99.99%. This modest memory requirement could help reduce the footprint of the SFQ coprocessors and power dissipation while preserving their inherent advantages of scalability and cost-effectiveness.
Single-flux-quantum (SFQ) digital circuitry has great potential in building a scalable control system of superconducting qubits. In this work, we describe a practical SFQ-based two-qubit gate for transmon qubits. The controlled-ZZZ (CZ) gate is activated by near-resonant SFQ-pulse trains near the target transition involving the second excited state. Numerical simulations show that the fidelity of a SFQ-activated CZ gate in excess of 99.9% is achievable within 100-ns gate time. We evaluate the CZ gate error caused by leakage and SFQ-pulse width. Combined with the proposed feasible expansion methods, this work is a supplement to the scalable and integratable superconducting-qubit control system based on SFQ digital logic.
The convergence of quantum computing and high-performance computing (HPC) necessitates innovative approaches to qubit control and coherence for scalable quantum systems. In this work, we explore the integration of superconducting Single-Flux Quantum (SFQ) digital circuits to enhance quantum state manipulation, leveraging their potential for high-speed, energy-efficient classical control. Our approach maps SFQ pulse trains and configurable SFQ-based switches to discrete phase shifts, enabling efficient qubit state transformations with minimal decoherence overhead. We introduce a classically driven SFQ-based quantum gate implementation, where SFQ pulses orchestrate the state evolution of qubits. To support dynamic and flexible qubit control within hybrid quantum-HPC architectures, we design and implement a multi-frequency SFQ pulse generator, capable of generating tailored pulse sequences that seamlessly interface with SQUID-based resonator-qubit cavities. This work demonstrates a promising path toward integrating quantum accelerators with classical HPC infrastructure, opti-mizing quantum-classical workflows, and enabling scalable, high-performance quantum computation.
Abstract The development of quantum computers based on superconductors requires the improvement of the qubit state control approach aimed at the increase of the hardware energy efficiency. A promising solution to this problem is the use of superconducting digital circuits operating with single-flux-quantum (SFQ) pulses, moving the qubit control system into the cold chamber. However, the qubit gate time under SFQ control is still longer than under conventional microwave driving. Here we introduce the bipolar SFQ pulse control based on ternary pulse sequences. We also develop a robust optimization algorithm for finding a sequence structure that minimizes the leakage of the transmon qubit state from the computational subspace. We show that the appropriate sequence can be found for arbitrary system parameters from the practical range. The proposed bipolar SFQ control reduces a single qubit gate time by halve compared to nowadays unipolar SFQ technique, while maintaining the gate fidelity over 99.99%.