Abstract The development of quantum computers based on superconductors requires the improvement of the qubit state control approach aimed at the increase of the hardware energy efficiency. A promising solution to this problem is the use of superconducting digital circuits operating with single-flux-quantum (SFQ) pulses, moving the qubit control system into the cold chamber. However, the qubit gate time under SFQ control is still longer than under conventional microwave driving. Here we introduce the bipolar SFQ pulse control based on ternary pulse sequences. We also develop a robust optimization algorithm for finding a sequence structure that minimizes the leakage of the transmon qubit state from the computational subspace. We show that the appropriate sequence can be found for arbitrary system parameters from the practical range. The proposed bipolar SFQ control reduces a single qubit gate time by halve compared to nowadays unipolar SFQ technique, while maintaining the gate fidelity over 99.99%.
Scalability of today’s superconducting quantum computers is limited due to the huge costs of generating/routing microwave control pulses per qubit from room temperature. One active research area in both industry and academia is to push the classical controllers to the dilution refrigerator in order to increase the scalability of quantum computers. Superconducting Single Flux Quantum (SFQ) is a classical logic technology with low power consumption and ultra-high speed, and thus is a promising candidate for in-fridge classical controllers with maximized scalability. Prior work has demonstrated high-fidelity SFQ-based single-qubit gates. However, little research has been done on SFQ-based multi-qubit gates, which are necessary to realize SFQ-based universal quantum computing.In this paper, we present the first thorough analysis of SFQ-based two-qubit gates. Our observations show that SFQ-based two-qubit gates tend to have high leakage to qubit non-computational subspace, which presents severe design challenges. We show that despite these challenges, we can realize gates with high fidelity by carefully designing optimal control methods and qubit architectures. We develop optimal control methods that suppress leakage, and also investigate various qubit architectures that reduce the leakage. After carefully engineering our SFQ-friendly quantum system, we show that it can achieve similar gate fidelity and gate time to microwave-based quantum systems. The promising results of this paper show that (1) SFQ-based universal quantum computation is both feasible and effective; and (2) SFQ is a promising approach in designing classical controller for quantum machines because it can increase the scalability while preserving gate fidelity and performance.
We present a gradient-based method to construct memory-efficient, high-fidelity, single-qubit gates for fluxonium qubits. These gates are constructed using a sequence of single-flux quantum (SFQ) pulses that are sent to the qubit through either capacitive or inductive coupling. The schedule of SFQ pulses is constructed with an on-ramp and an off-ramp applied prior to and after a pulse train, where the pulses are spaced at intervals equal to the qubit period. We reduce the optimization problem to the scheduling of a fixed number of SFQ pulses in the on-ramp and solve it by relaxing the discretization constraint of the SFQ clock as an intermediate step, allowing the use of the Broyden-Fletcher-Goldfarb-Shanno optimizer. Using this approach, gate fidelities of 99.99 % can be achieved for inductive coupling and 99.9 % for capacitive coupling, with leakage being the main source of coherent errors for both approaches.
Improving the speed and fidelity of quantum logic gates is essential to reach quantum advantage with future quantum computers. However, fast logic gates lead to increased leakage errors in superconducting quantum processors based on qubits with low anharmonicity, such as transmons. To reduce leakage errors, we propose and experimentally demonstrate two new analytical methods, Fourier ansatz spectrum tuning derivative removal by adiabatic gate (FAST DRAG) and higher-derivative (HD) DRAG, both of which enable shaping single-qubit control pulses in the frequency domain to achieve stronger suppression of leakage transitions compared to previously demonstrated pulse shapes. Using the new methods to suppress the e f transition of a transmon qubit with an anharmonicity of − 212 MHz, we implement R X ( π / 2 ) gates achieving a leakage error below 3.0 × 10 − 5 down to a gate duration of 6.25 ns without the need for iterative closed-loop optimization. The obtained leakage error represents a 20-fold reduction in leakage compared to a conventional cosine DRAG pulse. Employing the FAST DRAG method, we further achieve an error per gate of ( 1.56 ± 0.07 ) × 10 − 4 at a 7.9-ns gate duration, outperforming conventional pulse shapes both in terms of error and gate speed. Furthermore, we study error-amplifying measurements for the characterization of temporal microwave control-pulse distortions, and demonstrate that non-Markovian coherent errors caused by such distortions may be a significant source of error for sub-10-ns single-qubit gates unless corrected using predistortion. Published by the American Physical Society 2024
Recent achievements in the physical size of quantum computers based on superconducting qubits foresee reaching the next milestones of the exponentially growing number of qubits. The promises in the scalability present opportunities in integrated control electronics operating at 4K stage in the dilution refrigerator. In addition to the number of physical qubits, however, commercialization necessitates a further increase in the number of consecutive high-fidelity gate operations within a coherence time of
∼100μs. It leads to the stringent requirement on the duration of qubit-driving microwave pulse
(i.e., <20ns). The microwave pulses should only drive
∣0⟩↔∣1⟩for single qubit gate operations while avoiding leakage to
∣1⟩↔∣2⟩which is the major factor that degrades the gate fidelity. The frequency for
∣1⟩↔∣2⟩,ω12, is typically lower than the frequency for
∣0⟩↔∣1⟩,ω01, by
2π×(160MHz−to−360MHz). The frequency difference
(ω01−ω12), called anharmonicity, is an individual qubit characteristic and becomes the margin for spectral management. But, a short driving pulse even with Gaussian, sine, or raised-cosine shapes eventually widens the spectral width. It would range a few hundred MHz and result in a considerable spectral leakage at
ω12. To mitigate this spectral leakage, the derivative removal by adiabatic gate (DRAG) has been adopted in the pulse shaping [1], [2]. As shown in Fig. 34.4.1, the first-order DRAG pulse shaping is realized by adding two parts as \begin{equation*}\mathsf{O}(\mathrm{t})=\mathsf{S}_{\mathsf{M}}(\mathsf{t})\cdot\mathsf{cos}(\omega_{01}\mathsf{t}+\varphi)+\mathsf{q}_{\mathsf{scale}}\mathsf{S}_{\mathsf{M}}(\mathsf{t})^{\prime}\cdot\mathsf{sin}(\omega_{01}\mathsf{t}+\varphi)\end{equation*} where
SM(t)is the main pulse shape and
qscaleis a coefficient inversely proportional to the anharmonicity. This first-order DRAG makes an asymmetrical spectrum that lowers the left frequency side and raises the right frequency side. Since the
ω12is always on the left side of
ω01, the DRAG can effectively minimize the leakage.
High-fidelity control of superconducting qubits requires carefully shaped microwave pulses to avoid several different kinds of error at once. This article is a pedagogical bridging text aimed at upper-level undergraduate and early graduate students who have completed an introductory quantum mechanics course and a first course in quantum computing or quantum information, but who have not yet encountered the physical implementation of qubit gates. We integrate physical intuition for pulse design, analytical gate-level descriptions, and practical hardware considerations into a single, derivation-driven narrative, with explicit learning objectives. We begin with simple pulse envelopes and their spectral properties, showing how finite bandwidth produces leakage outside the computational subspace. This motivates the derivative removal by adiabatic gate (DRAG) technique, which we derive explicitly using the Magnus expansion, obtaining a clear, order-by-order account of which physical error channel appears at which order and why DRAG's cancellation is necessarily incomplete. We discuss the practical hardware realities of control pulse generation, focusing on arbitrary waveform generators (AWG), local oscillators (LO), and IQ mixing. Finally, we extend the discussion to two-qubit operation via the cross-resonance gate, and interpret how driving the control qubit at the target qubit's transition frequency necessarily produces several unwanted interaction terms alongside the desired one, and how successive generations of pulse-engineering strategies have been designed to suppress them.