Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Cryogenic temperature 3D mapping via a distributed temperature sensor with centimeter resolution

Luca Corradin, Gabriel Thiebaut, Gaëtan Gras, Félix Bussières, Jérôme Extermann, Enrico Pomarico

Published Apr 29, 2024• 4 citations
Publisher

Abstract

We conduct 3D mapping of cryogenic temperatures via a Raman-based distributed temperature sensor, employing standard telecom single-mode fibers and polarization-independent superconducting nanowire single photon detectors (SNSPDs). By coiling a test fiber around various stages of a liquid helium cooled cryostat, our device demonstrates a lower temperature sensing limit of (48 ± 2) K, below the nitrogen boiling point. This achievement is made possible by the low dark count rates of SNSPDs, as validated by theoretical simulations. Furthermore, we utilize our device to map cryogenic temperatures on the 350 cm 2 surface of a specially designed hollow cylindrical aluminum sample, accommodating approximately 2 m of standard single-mode optical fiber. During nitrogen cooling, we monitor the temporal evolution of the spatially dependent temperature gradient on the metallic sample with a temporal sampling down to one minute. Fiber-based distributed temperature sensing with centimetric spatial resolution can be effectively applied for 3D mapping at cryogenic temperatures of superconducting, quantum computing and aerospace instrumentation.

DOI
10.1364/oe.522694

Related papers

High-resolution single-mode fiber-optic distributed Raman sensor for absolute temperature measurement using superconducting nanowire single-photon detectors

Michael G. Tanner, Shellee D. Dyer, Burm Baek +2 more

We demonstrate a distributed fiber Raman sensor for absolute temperature measurement with spatial resolution on the order of 1 cm at 1550 nm wavelength in a single-mode fiber using superconducting nanowire single-photon detectors. Rapid measurements are shown, with less than 60 s integration period, allowing the demonstration of temperature evolution in an optical fiber recorded at over 100 resolvable, 1.2 cm spaced positions along the fiber simultaneously. This distributed sensor has potential application as a primary reference standard, in which high-accuracy, high-spatial-resolution temperature measurements can be obtained without the need for a separate temperature calibration standard.

Applied Physics Letters•Nov 14, 2011•102 citations

Electrical thermography via centimetre-scale fiber-based distributed temperature sensing

Victor Cochet, Axel Faccio, Georgios Stoikos +4 more

We present a Raman-based Distributed Temperature Sensor (RDTS) with centimetre-scale resolution for thermographic analysis of electronic circuits. Temperature is measured along a single-mode fiber routed across a custom printed circuit board (PCB) with 1 cm$^2$ heating elements, using optical time-domain reflectometry of Raman signals detected by superconducting nanowire single-photon detectors (SNSPDs). This approach enables two-dimensional thermal mapping of the PCB under heating configurations with multiple hotspots. A spatial resolution of 3 cm and a temperature accuracy of 2 °C are achieved with an integration time of 5 minutes. Thermography can be performed down to 77 K, revealing that the PCB thermal resistance decreases by nearly an order of magnitude compared to room temperature, due to enhanced convective cooling in liquid nitrogen. These results establish centimetre-scale RDTS as a robust technique for real-time, spatially resolved thermography of electronic circuits, particularly in regimes where infrared imaging is ineffective, such as at low temperatures or within volumetric electronic architectures.

quant-pharXiv:2511.11184•Nov 17, 2025

Analysis of a distributed fiber-optic temperature sensor using single-photon detectors

Shellee D. Dyer, Michael G. Tanner, Burm Baek +2 more

We demonstrate a high-accuracy distributed fiber-optic temperature sensor using superconducting nanowire single-photon detectors and single-photon counting techniques. Our demonstration uses inexpensive single-mode fiber at standard telecommunications wavelengths as the sensing fiber, which enables extremely low-loss experiments and compatibility with existing fiber networks. We show that the uncertainty of the temperature measurement decreases with longer integration periods, but is ultimately limited by the calibration uncertainty. Temperature uncertainty on the order of 3 K is possible with spatial resolution of the order of 1 cm and integration period as small as 60 seconds. Also, we show that the measurement is subject to systematic uncertainties, such as polarization fading, which can be reduced with a polarization diversity receiver.

arXiv:1111.4178•Optics Express•Jan 30, 2012•53 citations

Cryogenic Measurement Set-Up for Characterization of Superconducting Nano Structures for Single-Photon Detection Applications

Manju Singh, Rishu Chaujar B, Rajib Kumar Rakshit

We discuss the design and development of a cryogenic set-up down to ~1.8 K for carrying out measurements on superconducting nanowire single-photon detectors.The set-up consists of two separate low-temperature inserts, one for electrical characterization and the other for optical measurements and characterization of single-photon detectors.A sample holder with necessary arrangements for precise alignment of laser light with the active area of the device to enhance optical coupling efficiency has been designed for the optical probe.The invar alloy has been used for the sample holder to ensure that the alignment is not disturbed at low temperature.Single-mode fibres due to their high transmission rate, minimum attenuation and least distortion have been used to shine light on the samples.The sample holder with 20-pin LCC socket and matching chip carrier provides convenient and fast sample mounting in the electrical insert.Mumetal has been employed to cover the sample space in both the inserts in order to attenuate any electromagnetic interference.Temperature stability with the passage of time has been monitored.It has been found that variation in temperature is less than 10 mK at the lowest operating temperature.Another important advantage of the system is its low enough liquid helium loss rate (~100 ml/h) with all inserts, which allows uninterrupted measurements for several days without any refilling of liquid helium.

Current Science•Sep 1, 2018•6 citations

Cryogenic Dielectric Metasurface-Integrated Superconducting Nanowire Single-Photon Detectors

Amir Targholizadeh, Grigoriy Y. Nikulin, Pankaj K. Jha

Over the past decade, multi-element superconducting nanowire single-photon detectors (SNSPDs) have emerged as the leading single-photon detection technology due to their exceptional system detection efficiency (SDE), ultrahigh timing precision, negligible dark counts, etc. However, achieving these performances with a \textit{single-element} SNSPD has been an outstanding challenge due to a fundamental trade-off: a large active area is necessary for high SDE, while a smaller area is crucial for higher photon count rates, lower dark counts, and lower jitter. Here, we introduce an all-dielectric cryogenic metalens integrated with a single-element SNSPD to achieve high SDE with a smaller active area. Furthermore, we leverage a bifunctional metalens to demonstrate polarization-resolved photodetection at the telecommunication wavelength theoretically. Integrating multifunctional cryogenic metaurfaces with the state-of-the-art SNSPDs may enable novel capabilities with reduced size, weight, power, cost, and cooling (SWaP-C$^{2}$) requirements.

physics.opticsCross-listedarXiv:2512.17115•Dec 22, 2025•0 citations

Photonic readout of superconducting nanowire single photon counting detectors

Rajeev J. Ram, Marc de, Emma E. Wollman +1 more

Scalable, low power, high speed data transfer between cryogenic and room temperature environments is essential for the realization of practical, large-scale systems based on superconducting technologies. Optical fiber presents a 100–1,000x lower heat load than conventional electrical wiring, relaxing the requirements for thermal anchoring, and allows for very high bandwidth densities by carrying multiple signals through the same physical fiber. By operating a CMOS modulator in the forward bias regime at a temperature of 3.6 K, we have demonstrated the optical readout of a superconducting nanowire single-photon detector (SNSPD) without the need for an interfacing device.

Advanced Photon Counting Techniques•Jun 15, 2023•0 citations
We conduct 3D mapping of cryogenic temperatures via a Raman-based distributed temperature sensor, employing standard telecom single-mode fibers and polarization-independent superconducting nanowire single photon detectors (SNSPDs). By coiling a test fiber around various stages of a liquid helium cooled cryostat, our device demonstrates a lower temperature sensing limit of (48 ± 2) K, below the nitrogen boiling point. This achievement is made possible by the low dark count rates of SNSPDs, as validated by theoretical simulations. Furthermore, we utilize our device to map cryogenic temperatures on the 350 cm 2 surface of a specially designed hollow cylindrical aluminum sample, accommodating approximately 2 m of standard single-mode optical fiber. During nitrogen cooling, we monitor the temporal evolution of the spatially dependent temperature gradient on the metallic sample with a temporal sampling down to one minute. Fiber-based distributed temperature sensing with centimetric spatial resolution can be effectively applied for 3D mapping at cryogenic temperatures of superconducting, quantum computing and aerospace instrumentation.
We demonstrate a distributed fiber Raman sensor for absolute temperature measurement with spatial resolution on the order of 1 cm at 1550 nm wavelength in a single-mode fiber using superconducting nanowire single-photon detectors. Rapid measurements are shown, with less than 60 s integration period, allowing the demonstration of temperature evolution in an optical fiber recorded at over 100 resolvable, 1.2 cm spaced positions along the fiber simultaneously. This distributed sensor has potential application as a primary reference standard, in which high-accuracy, high-spatial-resolution temperature measurements can be obtained without the need for a separate temperature calibration standard.
We present a Raman-based Distributed Temperature Sensor (RDTS) with centimetre-scale resolution for thermographic analysis of electronic circuits. Temperature is measured along a single-mode fiber routed across a custom printed circuit board (PCB) with 1 cm2^22 heating elements, using optical time-domain reflectometry of Raman signals detected by superconducting nanowire single-photon detectors (SNSPDs). This approach enables two-dimensional thermal mapping of the PCB under heating configurations with multiple hotspots. A spatial resolution of 3 cm and a temperature accuracy of 2 °C are achieved with an integration time of 5 minutes. Thermography can be performed down to 77 K, revealing that the PCB thermal resistance decreases by nearly an order of magnitude compared to room temperature, due to enhanced convective cooling in liquid nitrogen. These results establish centimetre-scale RDTS as a robust technique for real-time, spatially resolved thermography of electronic circuits, particularly in regimes where infrared imaging is ineffective, such as at low temperatures or within volumetric electronic architectures.
We demonstrate a high-accuracy distributed fiber-optic temperature sensor using superconducting nanowire single-photon detectors and single-photon counting techniques. Our demonstration uses inexpensive single-mode fiber at standard telecommunications wavelengths as the sensing fiber, which enables extremely low-loss experiments and compatibility with existing fiber networks. We show that the uncertainty of the temperature measurement decreases with longer integration periods, but is ultimately limited by the calibration uncertainty. Temperature uncertainty on the order of 3 K is possible with spatial resolution of the order of 1 cm and integration period as small as 60 seconds. Also, we show that the measurement is subject to systematic uncertainties, such as polarization fading, which can be reduced with a polarization diversity receiver.
We discuss the design and development of a cryogenic set-up down to ~1.8 K for carrying out measurements on superconducting nanowire single-photon detectors.The set-up consists of two separate low-temperature inserts, one for electrical characterization and the other for optical measurements and characterization of single-photon detectors.A sample holder with necessary arrangements for precise alignment of laser light with the active area of the device to enhance optical coupling efficiency has been designed for the optical probe.The invar alloy has been used for the sample holder to ensure that the alignment is not disturbed at low temperature.Single-mode fibres due to their high transmission rate, minimum attenuation and least distortion have been used to shine light on the samples.The sample holder with 20-pin LCC socket and matching chip carrier provides convenient and fast sample mounting in the electrical insert.Mumetal has been employed to cover the sample space in both the inserts in order to attenuate any electromagnetic interference.Temperature stability with the passage of time has been monitored.It has been found that variation in temperature is less than 10 mK at the lowest operating temperature.Another important advantage of the system is its low enough liquid helium loss rate (~100 ml/h) with all inserts, which allows uninterrupted measurements for several days without any refilling of liquid helium.
Over the past decade, multi-element superconducting nanowire single-photon detectors (SNSPDs) have emerged as the leading single-photon detection technology due to their exceptional system detection efficiency (SDE), ultrahigh timing precision, negligible dark counts, etc. However, achieving these performances with a \textit{single-element} SNSPD has been an outstanding challenge due to a fundamental trade-off: a large active area is necessary for high SDE, while a smaller area is crucial for higher photon count rates, lower dark counts, and lower jitter. Here, we introduce an all-dielectric cryogenic metalens integrated with a single-element SNSPD to achieve high SDE with a smaller active area. Furthermore, we leverage a bifunctional metalens to demonstrate polarization-resolved photodetection at the telecommunication wavelength theoretically. Integrating multifunctional cryogenic metaurfaces with the state-of-the-art SNSPDs may enable novel capabilities with reduced size, weight, power, cost, and cooling (SWaP-C2^{2}2) requirements.
Scalable, low power, high speed data transfer between cryogenic and room temperature environments is essential for the realization of practical, large-scale systems based on superconducting technologies. Optical fiber presents a 100–1,000x lower heat load than conventional electrical wiring, relaxing the requirements for thermal anchoring, and allows for very high bandwidth densities by carrying multiple signals through the same physical fiber. By operating a CMOS modulator in the forward bias regime at a temperature of 3.6 K, we have demonstrated the optical readout of a superconducting nanowire single-photon detector (SNSPD) without the need for an interfacing device.