Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Optical transmission of microwave control signal towards large-scale superconducting quantum computing

Na Li, Yu-Huai Li, Dao-Jin Fan, Lianchen Han, Yu Xu, Jin Lin, Cheng Guo, Dongdong Li, Ming Gong, Sheng‐Kai Liao, Xiaobo Zhu, Cheng-Zhi Peng

Published Jan 9, 2024• 11 citations
Publisher

Abstract

With the rapid development of superconducting quantum computing and the implementation of surface code, large-scale quantum computing is emerging as an urgent demand. In a superconducting computing system, the qubit is maintained in a cryogenic environment to avoid thermal excitation. Thus, the transmission of control signals, which are generated at room temperature, is needed. Typically, the transmission of these signals to the qubit relies on a coaxial cable wiring approach. However, in a large-scale computing system with hundreds or even thousands of qubits, the coaxial cables will pose great space and heat load to the dilution refrigerator. Here, to tackle this problem, we propose and demonstrate a direct-modulation-based optical transmission line. In our experiment, the average single-qubit XEB error and control error are measured as 0.139% and 0.014% separately, demonstrating the feasibility of the optical wiring approach and paving the way for large-scale superconducting quantum computing.

DOI
10.1364/oe.514909

Related papers

High fidelity control of superconducting qubits with optical transmitted signal

Yu-Huai Li, Daojin Fan, Na Li +15 more

Superconducting circuits exhibit remarkable potential for constructing large-scale quantum simulation and computation systems, featuring numerous qubits, extended coherence time, and precise control. Nevertheless, the growing number of signal cables poses a challenge in dilution refrigerators due to space and heat load constraints. To overcome this issue, we experimentally implemented an optically-assisted transmission line as an alternative to coaxial cables. By modulating microwave signals on laser intensities at room temperature and regenerating the signals at a cryogenic plate within the dilution refrigerator, we demonstrated full control of superconducting qubits using photocurrent. We demonstrate and benchmark both single-qubit and two-qubit gates on frequency tunable transmon qubits, achieving fidelities of 99.915% $\pm$ 0.005% and 99.676% $\pm$ 0.041%, respectively, which have reached the requirement of the surface code.

quant-pharXiv:2608.19602•Aug 21, 2026•0 citations

All-optical control and multiplexed readout of multiple superconducting qubits

Xiaoxuan Pan, Chuanlong Ma, Jia-Qi Wang +12 more

Superconducting quantum circuits operate at millikelvin temperatures, typically requiring independent microwave cables for each qubit for connecting room-temperature control and readout electronics. However, scaling to large-scale processors hosting hundreds of qubits faces a severe input/output (I/O) bottleneck, as the dense cable arrays impose prohibitive constraints on physical footprint, thermal load, wiring complexity, and cost. Here we demonstrate a complete optical I/O architecture for superconducting quantum circuits, in which all control and readout signals are transmitted exclusively via optical photons. Employing a broadband traveling-wave Brillouin microwave-to-optical transducer, we achieve simultaneous frequency-multiplexed optical readout of two qubits. Combined with fiber-integrated photodiode arrays for control signal delivery, this closed-loop optical I/O introduces no measurable degradation to qubit coherence times, with an optically driven single-qubit gate fidelity showing only a 0.19% reduction relative to standard microwave operation. These results establish optical interconnects as a viable path toward large-scale superconducting quantum processors, and open the possibility of networking multiple superconducting quantum computers housed in separate dilution refrigerators through a centralized room-temperature control infrastructure.

quant-pharXiv:2512.21199•Dec 25, 2025•0 citations

Electro-Optical Control and Readout of Superconducting Devices

Calum Rose, Natale G. Pruiti, Daniel Kelly +3 more

Quantum computing is a rapidly evolving field with potential for solving complex problems beyond the reach of classical computers. Scalability in qubit design and signal processing architecture within cryostats is necessary for taking advantage of quantum computing's potential. Current state of the art qubit technology requires both a feed and readout line for each qubit within a quantum processor, with these lines generally being metallic coaxial cables. For stainless steel cables this represents a significant heat load into the cryostat. An alternative approach involves using optical fibers for signal transmission, as optical fibers have a thermal conductivity two orders of magnitude lower than stainless steel coaxial cables. The proposed method for optical signal transmission relies on electro-optic modulation, where a voltage applied to an electro-optic material changes its refractive index, allowing for a controllable phase change to be applied to any light passing through the material. This concept can be combined with on-chip photonic waveguide technology to build fiber-coupled phase modulators as well as intensity modulators using on chip interferometers. The proposed architecture uses a room temperature intensity modulator to encode microwave signals onto a laser signal, which is recovered at cryogenic temperatures using a photodiode and used as input for a device under test. The output of the test device is encoded onto light using a phase modulator and recovered at room temperature through interferometry. Proof-of-concept experiments have been carried out at room temperature, including noise characterization and preliminary tests of components at cryogenic temperatures.

IEEE International Conference on Quantum Computing and Engineering (QCE)•Sep 17, 2023•0 citations

A cryogenic on-chip microwave pulse generator for large-scale superconducting quantum computing

Zenghui Bao, Yan Li, Zhiling Wang +7 more

For superconducting quantum processors, microwave signals are delivered to each qubit from room-temperature electronics to the cryogenic environment through coaxial cables. Limited by the heat load of cabling and the massive cost of electronics, such an architecture is not viable for millions of qubits required for fault-tolerant quantum computing. Monolithic integration of the control electronics and the qubits provides a promising solution, which, however, requires a coherent cryogenic microwave pulse generator that is compatible with superconducting quantum circuits. Here, we report such a signal source driven by digital-like signals, generating pulsed microwave emission with well-controlled phase, intensity, and frequency directly at millikelvin temperatures. We showcase high-fidelity readout of superconducting qubits with the microwave pulse generator. The device demonstrated here has a small footprint, negligible heat load, great flexibility to operate, and is fully compatible with today's superconducting quantum circuits, thus providing an enabling technology for large-scale superconducting quantum computers.

arXiv:2407.11775•Nature Communications•Jul 16, 2024•23 citations

Scaling up Superconducting Quantum Computers With Cryogenic RF-Photonics

Sanskriti Joshi, Sajjad Moazeni

Today's hundred-qubit quantum computers require a dramatic scale up to millions of qubits to become practical for solving real-world problems. Although a variety of qubit technologies have been demonstrated, scalability remains a major hurdle. Superconducting (SC) qubits are one of the most mature and promising technologies to overcome this challenge. However, these qubits reside in a millikelvin cryogenic dilution fridge, isolating them from thermal and electrical noise. They are controlled by a rack-full of external electronics through extremely complex wiring and cables. Although thousands of qubits can be fabricated on a single chip and cooled down to millikelvin temperatures, scaling up the control and readout electronics remains an elusive goal. This is mainly due to the limited available cooling power in cryogenic systems constraining the wiring capacity and cabling heat load management. In this article, we focus on scaling up the number of XY-control lines by using cryogenic RF-photonic links. This is one of the major roadblocks to build a thousand qubit superconducting QC. We will first review and study the challenges of state-of-the-art proposed approaches, including cryogenic CMOS and deep-cryogenic photonic methods, to scale up the control interface for SC qubit systems. We will discuss their limitations due to the active power dissipation and passive heat leakage in detail. By analytically modeling the noise sources and thermal budget limits, we will show that our solution can achieve a scale up to a thousand of qubits. Our proposed method can be seamlessly implemented using advanced silicon photonic processes, and the number of required optical fibers can be further reduced by using wavelength division multiplexing (WDM).

arXiv:2210.15756•Journal of Lightwave Technology•Sep 5, 2023•26 citations

High-density wiring solution for 500-qubit scale superconducting quantum processors

Jian-Yan Tian, Yipu Song, Pei Liu +3 more

Scaling superconducting quantum processors to hundreds of qubits is essential for demonstrating quantum advantage and implementing quantum error correction codes with larger distances. A key challenge is integrating control and readout wiring without compromising cryogenic or electronic performance. To address this, we performed a systematic analysis of the thermal budget within a dilution refrigerator and developed high-density 0.5 mm SCuNi-CuNi coaxial cable sets optimized for heat load management. This enables the integration of 696 control lines and 40 readout amplification chains into a dilution refrigerator with a cooling power of 1 mW at 100 mK, maintaining a stable base temperature of ∼8 mK for over a year. We validated the platform's performance with two large-scale quantum processors: a 540-qubit processor with an average T1 of 35 μs and a 156-qubit processor with 182 tunable couplers, achieving average fidelities of 99.9% for single-qubit gates and 99.0% for two-qubit gates. This study demonstrates a viable high-density wiring solution for controlling and measuring processors at the 500-qubit scale and provides critical engineering insights for larger-scale quantum computing systems.

Review of Scientific Instruments•Oct 1, 2025•1 citation
With the rapid development of superconducting quantum computing and the implementation of surface code, large-scale quantum computing is emerging as an urgent demand. In a superconducting computing system, the qubit is maintained in a cryogenic environment to avoid thermal excitation. Thus, the transmission of control signals, which are generated at room temperature, is needed. Typically, the transmission of these signals to the qubit relies on a coaxial cable wiring approach. However, in a large-scale computing system with hundreds or even thousands of qubits, the coaxial cables will pose great space and heat load to the dilution refrigerator. Here, to tackle this problem, we propose and demonstrate a direct-modulation-based optical transmission line. In our experiment, the average single-qubit XEB error and control error are measured as 0.139% and 0.014% separately, demonstrating the feasibility of the optical wiring approach and paving the way for large-scale superconducting quantum computing.
Superconducting circuits exhibit remarkable potential for constructing large-scale quantum simulation and computation systems, featuring numerous qubits, extended coherence time, and precise control. Nevertheless, the growing number of signal cables poses a challenge in dilution refrigerators due to space and heat load constraints. To overcome this issue, we experimentally implemented an optically-assisted transmission line as an alternative to coaxial cables. By modulating microwave signals on laser intensities at room temperature and regenerating the signals at a cryogenic plate within the dilution refrigerator, we demonstrated full control of superconducting qubits using photocurrent. We demonstrate and benchmark both single-qubit and two-qubit gates on frequency tunable transmon qubits, achieving fidelities of 99.915% ±\pm± 0.005% and 99.676% ±\pm± 0.041%, respectively, which have reached the requirement of the surface code.
Superconducting quantum circuits operate at millikelvin temperatures, typically requiring independent microwave cables for each qubit for connecting room-temperature control and readout electronics. However, scaling to large-scale processors hosting hundreds of qubits faces a severe input/output (I/O) bottleneck, as the dense cable arrays impose prohibitive constraints on physical footprint, thermal load, wiring complexity, and cost. Here we demonstrate a complete optical I/O architecture for superconducting quantum circuits, in which all control and readout signals are transmitted exclusively via optical photons. Employing a broadband traveling-wave Brillouin microwave-to-optical transducer, we achieve simultaneous frequency-multiplexed optical readout of two qubits. Combined with fiber-integrated photodiode arrays for control signal delivery, this closed-loop optical I/O introduces no measurable degradation to qubit coherence times, with an optically driven single-qubit gate fidelity showing only a 0.19% reduction relative to standard microwave operation. These results establish optical interconnects as a viable path toward large-scale superconducting quantum processors, and open the possibility of networking multiple superconducting quantum computers housed in separate dilution refrigerators through a centralized room-temperature control infrastructure.
Quantum computing is a rapidly evolving field with potential for solving complex problems beyond the reach of classical computers. Scalability in qubit design and signal processing architecture within cryostats is necessary for taking advantage of quantum computing's potential. Current state of the art qubit technology requires both a feed and readout line for each qubit within a quantum processor, with these lines generally being metallic coaxial cables. For stainless steel cables this represents a significant heat load into the cryostat. An alternative approach involves using optical fibers for signal transmission, as optical fibers have a thermal conductivity two orders of magnitude lower than stainless steel coaxial cables. The proposed method for optical signal transmission relies on electro-optic modulation, where a voltage applied to an electro-optic material changes its refractive index, allowing for a controllable phase change to be applied to any light passing through the material. This concept can be combined with on-chip photonic waveguide technology to build fiber-coupled phase modulators as well as intensity modulators using on chip interferometers. The proposed architecture uses a room temperature intensity modulator to encode microwave signals onto a laser signal, which is recovered at cryogenic temperatures using a photodiode and used as input for a device under test. The output of the test device is encoded onto light using a phase modulator and recovered at room temperature through interferometry. Proof-of-concept experiments have been carried out at room temperature, including noise characterization and preliminary tests of components at cryogenic temperatures.
For superconducting quantum processors, microwave signals are delivered to each qubit from room-temperature electronics to the cryogenic environment through coaxial cables. Limited by the heat load of cabling and the massive cost of electronics, such an architecture is not viable for millions of qubits required for fault-tolerant quantum computing. Monolithic integration of the control electronics and the qubits provides a promising solution, which, however, requires a coherent cryogenic microwave pulse generator that is compatible with superconducting quantum circuits. Here, we report such a signal source driven by digital-like signals, generating pulsed microwave emission with well-controlled phase, intensity, and frequency directly at millikelvin temperatures. We showcase high-fidelity readout of superconducting qubits with the microwave pulse generator. The device demonstrated here has a small footprint, negligible heat load, great flexibility to operate, and is fully compatible with today's superconducting quantum circuits, thus providing an enabling technology for large-scale superconducting quantum computers.
Today's hundred-qubit quantum computers require a dramatic scale up to millions of qubits to become practical for solving real-world problems. Although a variety of qubit technologies have been demonstrated, scalability remains a major hurdle. Superconducting (SC) qubits are one of the most mature and promising technologies to overcome this challenge. However, these qubits reside in a millikelvin cryogenic dilution fridge, isolating them from thermal and electrical noise. They are controlled by a rack-full of external electronics through extremely complex wiring and cables. Although thousands of qubits can be fabricated on a single chip and cooled down to millikelvin temperatures, scaling up the control and readout electronics remains an elusive goal. This is mainly due to the limited available cooling power in cryogenic systems constraining the wiring capacity and cabling heat load management. In this article, we focus on scaling up the number of XY-control lines by using cryogenic RF-photonic links. This is one of the major roadblocks to build a thousand qubit superconducting QC. We will first review and study the challenges of state-of-the-art proposed approaches, including cryogenic CMOS and deep-cryogenic photonic methods, to scale up the control interface for SC qubit systems. We will discuss their limitations due to the active power dissipation and passive heat leakage in detail. By analytically modeling the noise sources and thermal budget limits, we will show that our solution can achieve a scale up to a thousand of qubits. Our proposed method can be seamlessly implemented using advanced silicon photonic processes, and the number of required optical fibers can be further reduced by using wavelength division multiplexing (WDM).
Scaling superconducting quantum processors to hundreds of qubits is essential for demonstrating quantum advantage and implementing quantum error correction codes with larger distances. A key challenge is integrating control and readout wiring without compromising cryogenic or electronic performance. To address this, we performed a systematic analysis of the thermal budget within a dilution refrigerator and developed high-density 0.5 mm SCuNi-CuNi coaxial cable sets optimized for heat load management. This enables the integration of 696 control lines and 40 readout amplification chains into a dilution refrigerator with a cooling power of 1 mW at 100 mK, maintaining a stable base temperature of ∼8 mK for over a year. We validated the platform's performance with two large-scale quantum processors: a 540-qubit processor with an average T1 of 35 μs and a 156-qubit processor with 182 tunable couplers, achieving average fidelities of 99.9% for single-qubit gates and 99.0% for two-qubit gates. This study demonstrates a viable high-density wiring solution for controlling and measuring processors at the 500-qubit scale and provides critical engineering insights for larger-scale quantum computing systems.