© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

Annual Meeting Optical Society of America

Avalanche-enhanced self-electro-optic-effect device

S. M. Horbatuck, Thomas G. Brown

Published Jan 1, 1992• 0 citations

Abstract

The ability to enhance optical nonlinearities associated with the photogeneration of free carriers can be accomplished with carrier multiplication. The gain mechanism provided by carrier multiplication is inherently feasible in avalanche photodiodes. We present results from optical bistability experiments performed on silicon avalanche photodiodes under reverse bias conditions in the case of thermal nonlinearities (Joule heating) and electronic nonlinearities (free carrier plasma effects). The reflected intensity versus the operating voltage is measured at the input intensity of the diode, as is also the output photocurrent versus operating voltage; in both instances, the reflected signal or photocurrent are multivalued functions of the operating voltage. We label such a device as an avalanche-enhanced self-electro-optic-effect device or A-SEED.

DOI: 10.1364/oam.1992.wq2

Related papers

Model of optical bistability in the quantum-well self-electro-optic-effect device

John C. Englund, Chi C. Sung, Y. Q. Li

Optical bistability of the multiple-quantum-well self-electro-optic-effect device is studied using a detailed model for a P–I–N photodiode under a constant voltage bias. By solving the Maxwell equations with the experimentally determined absorption function, bistability curves are obtained as functions of the incident frequency and of the bias potential. These results show good agreement with previously reported experimental data.

Journal of the Optical Society of America B•Jul 1, 1987•0 citations

Multiple quantum well optical nonlinearities: bistability from increasing absorption and the self electro-optic device

David A. B. Miller

Abstract This paper briefly reviews the nonlinear optical and electro-optical properties and applications of GaAs—AlGaAs multiple quantum wells, all of which are compatible with laser diodes or semiconductor electronics or both. They show large nonlinear absorption and refraction (associated with their strong room-temperature exciton resonances) applicable to all-optical devices. They also show large electroabsorptive effects, some of which are unique to the quantum wells at any temperature, which are so strong that optical modulators can be made with micrometre dimensions. A new class of optical bistability (due to increasing absorption) is also reviewed; combination of this with the electroabsorptive effects enables a new mirrorless optical switch called a Self Electro-optic Effect Device (SEED), which sets a new standard for optical switching energies, with energy densities reduced by a factor of six by comparison to even the best resonant cavity devices.

Philosophical Transactions of the Royal Society of London Series A Mathematical and Physical Sciences•Dec 18, 1984•6 citations

CdS self-electrooptic effect device: electrooptic modulation and optical bistability at 514nm

A. Witt, M. Wegener, Claus F. Klingshirn +3 more

It has been demonstrated that thin CdS crystal platelets at room temperature may exhibit all-optical bistability under illumination with the 514nm line of an Ar+-laser1. In this case the local heating of the sample leads to induced absorption optical bistability. In the present paper we evaporate metallic contacts on CdS crystals and apply an external bias voltage. The carriers created by the incoming light lead to a photo-current which in turn increases the temperature of the sample by electrical power via Joule's heat and thereby changes the optical properties 2,3.

Topical Meeting on Optical Bistability (OB)•Jan 1, 1988•0 citations

Increasing Absorption Bistability in Hybrid Silicon Devices and the Control of the Characteristics

Hongchen Zhai, Yasushi Iyechika, D. Jäger

Increasing absorption optical and optoelectronic bistability in hybrid thermooptical Si devices (Fig. 1) are studied at 1.06 μm both theoretically and experimentally. The optical nonlinearity of such SEED devices is largely enhanced by the optoelectronically generated electrical power [1,2] and it is shown that the characteristics can easily be controlled by the applied voltage. Additionally, it is found that the external resistance R adds a further nonlinearity. As an important result, two hysteresis cycles can now occur in succeeding regions of the input power (Fig. 2). If R is replaced by a conventional photodetector or a second SEED element, interesting logic operations between two independent optical signals are possible. Au doped samples reveal that the bistability depends on the orientation of the electric field. Since Au traps control also the absorption we conclude finally that the device characteristics can largely be engineered.

Topical Meeting on Optical Bistability (OB)•Jan 1, 1988•0 citations

CdS SELF-ELECTRO-OPTIC EFFECT DEVICE

M. Wegener, A. Witt, Claus F. Klingshirn +3 more

We present a CdS-SEED based on photothermal induced absorption optical bistability at room temperature. It is demonstrated, that this element may controll (a) photonics with photonics (whereby e.g. the gain of an optical transistor can be engineered via the applied voltage), (b) photonics with electronics (with big contrast ratio and voltages which are compatible with usual electronic logic levels) and (c) electronics with photonics with reasonable contrast ratio.

Le Journal de Physique Colloques•Jun 1, 1988•2 citations

Dual Wavelength Electro-Optical Bistability in an Asymmetric Self-Electro-Optic Effect Device

Kenji Kawashima, Kenzo Fujiwara, Kikuo Kobayashi Sano

We have demonstrated bistable operation of an asymmetric self-electro-optic effect device (A-SEED) which consists of a GaAs/AlAs superlattice and an InGaAs/AlGaAs multiple quantum well. The A-SEED is driven by two illuminations with widely separated wavelengths, one of which is transparent to the GaAs substrate. Advantages of the A-SEED for applications to optically bistable transmission devices are discussed with emphasis on negligible crosstalk between the signal beam and the control beam.

Japanese Journal of Applied Physics•Mar 1, 1992•2 citations

The ability to enhance optical nonlinearities associated with the photogeneration of free carriers can be accomplished with carrier multiplication. The gain mechanism provided by carrier multiplication is inherently feasible in avalanche photodiodes. We present results from optical bistability experiments performed on silicon avalanche photodiodes under reverse bias conditions in the case of thermal nonlinearities (Joule heating) and electronic nonlinearities (free carrier plasma effects). The reflected intensity versus the operating voltage is measured at the input intensity of the diode, as is also the output photocurrent versus operating voltage; in both instances, the reflected signal or photocurrent are multivalued functions of the operating voltage. We label such a device as an avalanche-enhanced self-electro-optic-effect device or A-SEED.

Abstract This paper briefly reviews the nonlinear optical and electro-optical properties and applications of GaAs—AlGaAs multiple quantum wells, all of which are compatible with laser diodes or semiconductor electronics or both. They show large nonlinear absorption and refraction (associated with their strong room-temperature exciton resonances) applicable to all-optical devices. They also show large electroabsorptive effects, some of which are unique to the quantum wells at any temperature, which are so strong that optical modulators can be made with micrometre dimensions. A new class of optical bistability (due to increasing absorption) is also reviewed; combination of this with the electroabsorptive effects enables a new mirrorless optical switch called a Self Electro-optic Effect Device (SEED), which sets a new standard for optical switching energies, with energy densities reduced by a factor of six by comparison to even the best resonant cavity devices.

It has been demonstrated that thin CdS crystal platelets at room temperature may exhibit all-optical bistability under illumination with the 514nm line of an Ar+-laser1. In this case the local heating of the sample leads to induced absorption optical bistability. In the present paper we evaporate metallic contacts on CdS crystals and apply an external bias voltage. The carriers created by the incoming light lead to a photo-current which in turn increases the temperature of the sample by electrical power via Joule's heat and thereby changes the optical properties 2,3.

Increasing absorption optical and optoelectronic bistability in hybrid thermooptical Si devices (Fig. 1) are studied at 1.06 μm both theoretically and experimentally. The optical nonlinearity of such SEED devices is largely enhanced by the optoelectronically generated electrical power [1,2] and it is shown that the characteristics can easily be controlled by the applied voltage. Additionally, it is found that the external resistance R adds a further nonlinearity. As an important result, two hysteresis cycles can now occur in succeeding regions of the input power (Fig. 2). If R is replaced by a conventional photodetector or a second SEED element, interesting logic operations between two independent optical signals are possible. Au doped samples reveal that the bistability depends on the orientation of the electric field. Since Au traps control also the absorption we conclude finally that the device characteristics can largely be engineered.