Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Physical Review A

Atomic mixer based on phase control without ac Zeeman shift

Zhi Liang, Xu‐xing Geng, Guoqing Yang, Kai Jin, Shangqing Liang, Shao‐ping Wu, Guangming Huang, Gao‐xiang Li

Published Jan 30, 2023• 3 citations
Publisher

Abstract

Atom-based mixers have been shown to be very useful in performing the absolute measurement of the magnitude of a radio-frequency (rf) field by using Autler-Townes (AT) splitting. However, there has been less success in measuring the phase of a rf field with the AT splitting in a magnetic-resonance system. The phase of the rf magnetic field plays a very important role in imaging applications. Here, we design an atomic mixer for measuring the phase of the rf field by detecting the transmission spectra of a laser-detected magnetic-resonance system based on the interference between Raman and cascade two-photon processes for ${F}_{g}=4$ of the ${D}_{1}$ line of cesium atoms. A scheme of measuring the rf phase can be realized with the elimination of the ac Zeeman shift of the system by adjusting the amplitude ratio of a transverse fundamental-wave field and its third-harmonic field. Theoretical and experimental results show that the scheme with cancellation of the ac Zeeman shift is superior in linear measurement of the longitudinal rf component. Our results provide schemes for a magnetic sensor based on quantum interference of nonlinear processes for the absolute measurement of the relative phase of rf fields.

DOI
10.1103/physreva.107.013115

Related papers

A Rydberg atom-based mixer: Measuring the phase of a radio frequency wave

Matthew T. Simons, Abdulaziz H. Haddab, Joshua A. Gordon +1 more

Rydberg atoms have been shown to be very useful in performing absolute measurements of the magnitude of a radio frequency (RF) field using electromagnetically induced transparency. However, there has been less success in using Rydberg atoms for the measurement of the phase of an RF field. Measuring the phase of a RF field is a necessary component for many important applications, including antenna metrology, communications, and radar. We demonstrate a scheme for measuring the phase of an RF field by using Rydberg atoms as a mixer to down-convert an RF field at 20 GHz to an intermediate frequency on the order of kHz. The phase of the intermediate frequency corresponds directly to the phase of the RF field. We use this approach to measure the phase shift on an electromagnetic wave from a horn antenna as the antenna is placed at different distances from the Rydberg atom sensor. The atom-based RF phase measurements allow us to measure the propagation constant of the RF wave to within 0.1% of the theoretical value.

Applied Physics Letters•Mar 18, 2019•270 citations

Rydberg-Atom-Based Electrometry Using a Self-Heterodyne Frequency-Comb Readout and Preparation Scheme

Katelyn Dixon, Kent A. Nickerson, Donald W. Booth +1 more

Atom-based radio-frequency (rf) electromagnetic field sensing using atomic Rydberg states is a promising technique that has recently attracted significant interest. Its unique advantages, such as extraordinary bandwidth, self-calibration, and all-dielectric sensors, are a tangible improvement over antenna-based methods in applications such as test and measurement and development of broad-bandwidth receivers. Here, we demonstrate how an optical-frequency comb can be used to acquire data in the Autler-Townes regime of Rydberg-atom-based electrometry in a massively parallel fashion, eliminating the need for laser scanning. Two-photon electromagnetically induced transparency readout and preparation of cesium is used for the demonstration. A flat quasicontinuous optical comb is generated with the probe laser at 852 nm using an electro-optic modulator and arbitrary waveform generator. A single-frequency coupling laser at 509 nm is tuned to the Rydberg launch state. An enhanced transmission signal is obtained using self-heterodyne spectroscopy, where the comb signal is beat against a local oscillator derived from the single-frequency probe laser on a fast photodiode. The transmission of each probe-laser comb tooth is observed. We resolve electromagnetically induced transparency peaks with line widths below 5 MHz, with and without laser locking. Radio-frequency electromagnetic fields as low as $66\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}{\mathrm{Vcm}}^{\ensuremath{-}1}$ are detected, with sensitivities of $2.3\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}{\mathrm{Vcm}}^{\ensuremath{-}1}{\mathrm{Hz}}^{\ensuremath{-}1/2}$. The method offers a significant advantage for reading out electromagnetically induced transparency and Autler-Townes splitting, as neither laser needs to be scanned and slow frequency drifts can be tolerated in some applications. The method enables the detection of the amplitude of a pulsed rf electromagnetic field when the incoming pulse Autler-Townes splits the electromagnetically induced transparency peak.

arXiv:2209.02583•Physical Review Applied•Mar 23, 2023•35 citations

Laser-detected magnetic resonance induced by radio-frequency two-photon processes

Xu‐xing Geng, Guoqing Yang, Pan-li Qi +4 more

We have theoretically and experimentally investigated the laser-detected magnetic resonance induced by radio-frequency two-photon processes in ${F}_{g}=4$ of ${D}_{1}$ line of cesium atoms. The effective Hamiltonian for the interaction between the two radio-frequency magnetic fields and sublevels at the ground state of ${F}_{g}=4$ is derived. By appropriately selecting the frequencies of the two radio-frequency fields, the Raman two-photon process and the cascade two-photon process can occur, which induce the magnetic resonance detected through laser transmission spectra. The theoretical calculation results fit well with the experimental data. Our results maybe apply for measuring the high bandwidth radio-frequency magnetic fields in space and studying the magnetic-induction tomography.

Physical Review A•May 17, 2021•16 citations

A read-out enhancement for microwave electric field sensing with Rydberg atoms

Harald Kübler, James P. Shaffer

We have shown that Rydberg atoms can be used for high-sensitivity, absolute sensing of radio frequency (RF) electric fields. We achieved a sensitivity of 3 μVcm-1Hz-1/2 for two read-out strategies. Results using a Mach-Zehnder interferometer2 and frequency modulated spectroscopy both achieve similar photon shot noise limited sensitivity. Fundamental limits to the sensitivity of the Rydberg atom-based RF electric field sensing have been addressed. Depending on the spectral resolution of the read-out, either the RF induced transmission line frequency splitting, the Autler-Townes regime, or a change in the on-resonant absorption, the amplitude regime, can be used to determine the RF electric field. Here, we present theoretical results of a 3-photon read-out scheme which enables the Autler-Townes regime of Rydberg atom-based RF electrometry to be extended to lower RF electric field strengths. We show that the residual Doppler shifts can, in principle, be reduced to ~11.8 kHz, on the order of the Rydberg atom natural lindewidths, using the approach.

SPIE Quantum Technologies•May 21, 2018•33 citations

Rydberg-atom-based radio-frequency sensors: amplitude-regime sensing

Matthias Schmidt, Stephanie M. Bohaichuk, Vijin Venu +5 more

Rydberg atom-based radio frequency electromagnetic field sensors are drawing wide-spread interest because of their unique properties, such as small size, dielectric construction, and self-calibration. These photonic sensors use lasers to prepare atoms and read out the atomic response to a radio frequency electromagnetic field based on electromagnetically induced transparency, or related phenomena. Much of the theoretical work has focused on the Autler-Townes splitting induced by the radio frequency wave. The amplitude regime, where the change in transmission observed on resonance is measured to determine electric field strength, has received less attention. In this paper, we deliver analytic expressions that are useful for calculating the absorption coefficient in the amplitude regime. Our main goal is to describe the analytic expressions for the absorption coefficient and demonstrate their validity over a large range of the interesting parameter space. The effect of the thermal motion of the atoms is explicitly addressed. The analytic formulas for the absorption coefficient for different types of Doppler broadening are compared to estimate the sensitivity under conditions where it is limited by the laser shot noise. Residual Doppler shifts are shown to limit sensitivity. The expressions, approximations and descriptions presented in the paper are important for understanding the absorption of Rydberg atom-based sensors in the amplitude regime. This provides insight into the physics of multi-level interference phenomena.

arXiv:2307.00121•Optics Express•Jun 13, 2024•22 citations

Characterizing the impact of the magnetic field in the frequency domain for a multiwave atom interferometer

Xudong Ren, Wenhua Yan, Yukun Yang +4 more

We implement a magnetic-field-sensitive multiwave atom Ramsey interferometer based on radio-frequency (RF) field-coupled Zeeman states, and we theoretically derive and experimentally measure its frequency-domain transfer function with low-pass filtering characteristics. In addition, we investigate a potential application scheme of the transfer functions for interference fringe recovery. As the measurements involve the ac magnetic field, a Raman spectrum-based solution is implemented to calibrate the actual ac magnetic field amplitude at the position of the atom inside the vacuum chamber. The methods demonstrated in this work will help to improve the performance of the atom interferometer and are also useful in Ramsey interference-based systems and spinor Bose-Einstein condensates (BEC) experiments.

Physical Review A•Dec 11, 2023•6 citations
Atom-based mixers have been shown to be very useful in performing the absolute measurement of the magnitude of a radio-frequency (rf) field by using Autler-Townes (AT) splitting. However, there has been less success in measuring the phase of a rf field with the AT splitting in a magnetic-resonance system. The phase of the rf magnetic field plays a very important role in imaging applications. Here, we design an atomic mixer for measuring the phase of the rf field by detecting the transmission spectra of a laser-detected magnetic-resonance system based on the interference between Raman and cascade two-photon processes for Fg=4{F}_{g}=4Fg​=4 of the D1{D}_{1}D1​ line of cesium atoms. A scheme of measuring the rf phase can be realized with the elimination of the ac Zeeman shift of the system by adjusting the amplitude ratio of a transverse fundamental-wave field and its third-harmonic field. Theoretical and experimental results show that the scheme with cancellation of the ac Zeeman shift is superior in linear measurement of the longitudinal rf component. Our results provide schemes for a magnetic sensor based on quantum interference of nonlinear processes for the absolute measurement of the relative phase of rf fields.
Rydberg atoms have been shown to be very useful in performing absolute measurements of the magnitude of a radio frequency (RF) field using electromagnetically induced transparency. However, there has been less success in using Rydberg atoms for the measurement of the phase of an RF field. Measuring the phase of a RF field is a necessary component for many important applications, including antenna metrology, communications, and radar. We demonstrate a scheme for measuring the phase of an RF field by using Rydberg atoms as a mixer to down-convert an RF field at 20 GHz to an intermediate frequency on the order of kHz. The phase of the intermediate frequency corresponds directly to the phase of the RF field. We use this approach to measure the phase shift on an electromagnetic wave from a horn antenna as the antenna is placed at different distances from the Rydberg atom sensor. The atom-based RF phase measurements allow us to measure the propagation constant of the RF wave to within 0.1% of the theoretical value.
Atom-based radio-frequency (rf) electromagnetic field sensing using atomic Rydberg states is a promising technique that has recently attracted significant interest. Its unique advantages, such as extraordinary bandwidth, self-calibration, and all-dielectric sensors, are a tangible improvement over antenna-based methods in applications such as test and measurement and development of broad-bandwidth receivers. Here, we demonstrate how an optical-frequency comb can be used to acquire data in the Autler-Townes regime of Rydberg-atom-based electrometry in a massively parallel fashion, eliminating the need for laser scanning. Two-photon electromagnetically induced transparency readout and preparation of cesium is used for the demonstration. A flat quasicontinuous optical comb is generated with the probe laser at 852 nm using an electro-optic modulator and arbitrary waveform generator. A single-frequency coupling laser at 509 nm is tuned to the Rydberg launch state. An enhanced transmission signal is obtained using self-heterodyne spectroscopy, where the comb signal is beat against a local oscillator derived from the single-frequency probe laser on a fast photodiode. The transmission of each probe-laser comb tooth is observed. We resolve electromagnetically induced transparency peaks with line widths below 5 MHz, with and without laser locking. Radio-frequency electromagnetic fields as low as $66\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}{\mathrm{Vcm}}^{\ensuremath{-}1}$ are detected, with sensitivities of $2.3\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}{\mathrm{Vcm}}^{\ensuremath{-}1}{\mathrm{Hz}}^{\ensuremath{-}1/2}$. The method offers a significant advantage for reading out electromagnetically induced transparency and Autler-Townes splitting, as neither laser needs to be scanned and slow frequency drifts can be tolerated in some applications. The method enables the detection of the amplitude of a pulsed rf electromagnetic field when the incoming pulse Autler-Townes splits the electromagnetically induced transparency peak.
We have theoretically and experimentally investigated the laser-detected magnetic resonance induced by radio-frequency two-photon processes in Fg=4{F}_{g}=4Fg​=4 of D1{D}_{1}D1​ line of cesium atoms. The effective Hamiltonian for the interaction between the two radio-frequency magnetic fields and sublevels at the ground state of Fg=4{F}_{g}=4Fg​=4 is derived. By appropriately selecting the frequencies of the two radio-frequency fields, the Raman two-photon process and the cascade two-photon process can occur, which induce the magnetic resonance detected through laser transmission spectra. The theoretical calculation results fit well with the experimental data. Our results maybe apply for measuring the high bandwidth radio-frequency magnetic fields in space and studying the magnetic-induction tomography.
We have shown that Rydberg atoms can be used for high-sensitivity, absolute sensing of radio frequency (RF) electric fields. We achieved a sensitivity of 3 μVcm-1Hz-1/2 for two read-out strategies. Results using a Mach-Zehnder interferometer2 and frequency modulated spectroscopy both achieve similar photon shot noise limited sensitivity. Fundamental limits to the sensitivity of the Rydberg atom-based RF electric field sensing have been addressed. Depending on the spectral resolution of the read-out, either the RF induced transmission line frequency splitting, the Autler-Townes regime, or a change in the on-resonant absorption, the amplitude regime, can be used to determine the RF electric field. Here, we present theoretical results of a 3-photon read-out scheme which enables the Autler-Townes regime of Rydberg atom-based RF electrometry to be extended to lower RF electric field strengths. We show that the residual Doppler shifts can, in principle, be reduced to ~11.8 kHz, on the order of the Rydberg atom natural lindewidths, using the approach.
Rydberg atom-based radio frequency electromagnetic field sensors are drawing wide-spread interest because of their unique properties, such as small size, dielectric construction, and self-calibration. These photonic sensors use lasers to prepare atoms and read out the atomic response to a radio frequency electromagnetic field based on electromagnetically induced transparency, or related phenomena. Much of the theoretical work has focused on the Autler-Townes splitting induced by the radio frequency wave. The amplitude regime, where the change in transmission observed on resonance is measured to determine electric field strength, has received less attention. In this paper, we deliver analytic expressions that are useful for calculating the absorption coefficient in the amplitude regime. Our main goal is to describe the analytic expressions for the absorption coefficient and demonstrate their validity over a large range of the interesting parameter space. The effect of the thermal motion of the atoms is explicitly addressed. The analytic formulas for the absorption coefficient for different types of Doppler broadening are compared to estimate the sensitivity under conditions where it is limited by the laser shot noise. Residual Doppler shifts are shown to limit sensitivity. The expressions, approximations and descriptions presented in the paper are important for understanding the absorption of Rydberg atom-based sensors in the amplitude regime. This provides insight into the physics of multi-level interference phenomena.
We implement a magnetic-field-sensitive multiwave atom Ramsey interferometer based on radio-frequency (RF) field-coupled Zeeman states, and we theoretically derive and experimentally measure its frequency-domain transfer function with low-pass filtering characteristics. In addition, we investigate a potential application scheme of the transfer functions for interference fringe recovery. As the measurements involve the ac magnetic field, a Raman spectrum-based solution is implemented to calibrate the actual ac magnetic field amplitude at the position of the atom inside the vacuum chamber. The methods demonstrated in this work will help to improve the performance of the atom interferometer and are also useful in Ramsey interference-based systems and spinor Bose-Einstein condensates (BEC) experiments.