YBa2Cu3O7-x(YBCO) ramp-edge junction technologies have been developed for fabricating high-operating-temperature SFQ(Single Flux Quantum) circuits. The Ic(critical current) spread that is the key parameter for integrating junctions could be decreased to 8% for a 1000-junction array that was formed on a groundplane. The background technologies that enabled this uniform junction characteristic are precise control of the counter-electrode deposition-conditions and deposition of the extremely smooth multiplayer that showed the roughness as small as 2 nm. Based upon these ramp-edge junction technologies, oxide SFQ-circuit-elements were fabricated and their logic operations were investigated. SFQ circuit elements such as a confluence buffer, a set-reset flipflop, and a toggle flipflop have been fabricated and their logic operations were measured by using an SFQ-dc converter. Both toggle flipflops that have one output and two outputs have been fabricated. These circuits could be operated up to the temperature of near 60 K under finite operating margins. These experimental results enable us to further develop fuctional and much more integrated SFQ circuits.YBa2Cu3O7-x(YBCO) ramp-edge junction technologies have been developed for fabricating high-operating-temperature SFQ(Single Flux Quantum) circuits. The Ic(critical current) spread that is the key parameter for integrating junctions could be decreased to 8% for a 1000-junction array that was formed on a groundplane. The background technologies that enabled this uniform junction characteristic are precise control of the counter-electrode deposition-conditions and deposition of the extremely smooth multiplayer that showed the roughness as small as 2 nm. Based upon these ramp-edge junction technologies, oxide SFQ-circuit-elements were fabricated and their logic operations were investigated. SFQ circuit elements such as a confluence buffer, a set-reset flipflop, and a toggle flipflop have been fabricated and their logic operations were measured by using an SFQ-dc converter. Both toggle flipflops that have one output and two outputs have been fabricated. These circuits could be operated up to the temperature of near 60 K under finite operating margins. These experimental results enable us to further develop fuctional and much more integrated SFQ circuits.

Advances in science and technologyOct 1, 20061 citation

Fabrication and operation of HTS SFQ logic circuits

Koji Tsubone, Y. Tarutani, H. Wakana +5 more

Physica C SuperconductivityJun 7, 20070 citations

Fabrication of Basic SFQ Logic Circuit with High Tc Superconductors

Young Hwan Kim, Joonhee Kang, Jongmin Lee +4 more

Springer eBooksJan 1, 19970 citations

YBa $_{2}$ Cu $_{3}$ O $_{7-\delta }$ Single Flux Quantum Flip Flop Directly Written With a Focused Helium Ion BeamYBa$_{2}$Cu$_{3}$O$_{7-\delta }$Single Flux Quantum Flip Flop Directly Written With a Focused Helium Ion Beam

Han Cai, Hao Li, Ethan Y. Cho +2 more

Superconducting logic circuits based on low transition temperature (Tc) are attractive due to their intrinsic low power consumption and high operating frequency. They have a wide variety of applications (particularly in future computing), but are difficult to use because they require cooling with liquid helium to operate. The current high Tclogic circuit based on YBa2Cu3O7-δ(YBCO) already has the ability to operate at a temperature above 4 K. However, this material is difficult to integrate into large-scale circuits by the traditional YBCO junction fabrication process. The limits of fabrication methods are the bottleneck stifling this material's potential for integration into logic circuits. As such, in this paper we aim to advance the state of the art in junction fabrication technology. Here we report the demonstration of a high Tcsuperconducting single flux quantum (SFQ) circuit made by a focused helium ion beam that is easily fabricated and can readily be incorporated into a large-scale integration with nano-scale junctions for future applications. An inductively coupled readout superconducting quantum interference device (SQUID) is employed to reduce the circuit complexity. The circuit parameters and performance are discussed.Superconducting logic circuits based on low transition temperature (Tc) are attractive due to their intrinsic low power consumption and high operating frequency. They have a wide variety of applications (particularly in future computing), but are difficult to use because they require cooling with liquid helium to operate. The current high Tclogic circuit based on YBa2Cu3O7-δ(YBCO) already has the ability to operate at a temperature above 4 K. However, this material is difficult to integrate into large-scale circuits by the traditional YBCO junction fabrication process. The limits of fabrication methods are the bottleneck stifling this material's potential for integration into logic circuits. As such, in this paper we aim to advance the state of the art in junction fabrication technology. Here we report the demonstration of a high Tcsuperconducting single flux quantum (SFQ) circuit made by a focused helium ion beam that is easily fabricated and can readily be incorporated into a large-scale integration with nano-scale junctions for future applications. An inductively coupled readout superconducting quantum interference device (SQUID) is employed to reduce the circuit complexity. The circuit parameters and performance are discussed.

IEEE Transactions on Applied SuperconductivityApr 1, 202115 citations

Design of SFQ logic circuits using a Logic Synthesis tool

Akimoto Aya, Yuki Yamanashi, Yoshikawa Nobuyuki

IEICE Technical Report; IEICE Tech. Rep.Oct 15, 20040 citations

YBa

_{2}

_{3}

_{7-\delta }

Single Flux Quantum Flip Flop Directly Written With a Focused Helium Ion Beam