Superconductor Logic

Naoki Takeuchi, Yuki Yamanashi, Nobuyuki Yoshikawa

Adiabatic superconductor logic (ASL), including adiabatic quantum-flux-parametron (AQFP) logic, exhibits high energy efficiency because its bit energy can be decreased below the thermal energy through adiabatic switching operations. In the present paper, we present the general scaling laws of ASL and compare the energy efficiency of ASL with those of other energy-efficient logics. Also, we discuss the minimum energy-delay product (EDP) of ASL at finite temperature. Our study shows that there is a maximum temperature at which the EDP can reach the quantum limit given by ħ /2, which is dependent on the superconductor material and the Josephson junction quality, and that it is reasonable to operate ASL at cryogenic temperatures in order to achieve an EDP that approaches ħ /2.

Gleb Krylov, Eby G. Friedman

David S. Simon

Naoki Takeuchi, Kota Arai, Nobuyuki Yoshikawa

Abstract Adiabatic superconductor logic (ASL) families are energy-efficient because they can operate with a switching energy much less than the I cΦ0 product, where I c is the critical current for Josephson junctions, Φ0 is the flux quantum, and I cΦ0 is generally on the order of 10–19 J. A switching energy of 0.03I cΦ0 has been demonstrated by adiabatic quantum-flux-parametron (AQFP) logic, which indicates the possibility of extremely energy-efficient digital circuits using ASL. ASL uses signal transformers to propagate and invert the signal current; otherwise, it is difficult to design inverters. However, signal transformers are generally difficult to miniaturize. Therefore, to realize high-density and energy-efficient superconductor circuits, ASL that does not use signal transformers is required. In this paper, we propose ASL without signal transformers, which we call directly coupled quantum-flux-parametron (DQFP). DQFP logic is based on AQFP, but it can invert signal current without using signal transformers. We conducted numerical simulation of a DQFP inverter chain to show that DQFP logic can invert signal current without signal transformers, and that DQFP logic can operate adiabatically. Then, we designed and fabricated basic DQFP circuits, such as an inverter chain and a full adder. All the circuits were found to have wide operating margins. Our results indicate that DQFP logic is suitable for high-density and energy-efficient superconductor circuits.

Hiu Yung Wong

Kenta Inoue, Naoki Takeuchi, Tatsuya Narama +2 more

Abstract Adiabatic quantum-flux-parametron (AQFP) logic is an energy-efficient superconductor logic with zero static power and very small dynamic power due to adiabatic switching operations. In order to build large-scale digital circuits, we built AQFP logic cells using superconductor magnetic shields, which are necessary in order to avoid unwanted magnetic couplings between the cells and excitation currents. In preliminary experimental tests, we confirmed that the unwanted coupling became negligibly small thanks to the superconductor shields. As a demonstration, we designed a four-to-one multiplexor and a 16-junction full adder using the shielded logic cells. In both circuits, we confirmed correct logic operations with wide operation margins of excitation currents. These results indicate that large-scale AQFP digital circuits can be realized using the shielded logic cells.