Electron spins trapped in quantum dots have recently proven to be a promising technology for the implementation of qubits, already demonstrating high fidelity single- and two-qubits gates. The next step towards fault-tolerant quantum computing is to increase the number of so-called spin qubits on the processor. However, this poses several challenges, one of which being how to implement single-qubit gates in multi-qubit systems, with high fidelity. This work focused on two aspects. The first one was to identify the physical phenomena and limitations that hinder the realisation of high fidelity single-qubit gates in multi-qubit environments. The second objective was to investigate, implement and optimise methods in order to minimise the impact of these perturbing phenomena. The identified perturbing effects include unwanted driving between a pulse and the neighbouring qubits, as well as frequency shifts induced by drive-spin coupling and non-ideal pulse in experimental setups. Crosstalk was addressed using pulse shaping (i.e. amplitude or phase modulation of the driving pulse to tailor its spectral characteristics and reduce the energy transmitted at unwanted frequencies). The performance of shapes taken from both NMR and signal processing literature was investigated, for various pulse parameters, through an extensive grid search. In addition, a frequency correction algorithm was devised: off-resonant drive frequencies are selected so that the shifted qubits are resonantly driven. It currently accounts for two phenomena: the AC Stark and Bloch-Siegert shifts. The algorithm furthermore tracks the changes caused by the time-dependent characteristics of the shaped pulses. The proposed frequency correction algorithm was shown to almost entirely negate the effects of the considered shifts, leading to unitary fidelity improvements by up to 55%. In addition, pulse shaping was demonstrated to noticeably improve the fidelity of simultaneous single-qubit rotations compared to unshaped driving. Rotations with fidelities as high as 99.98% were obtained for pi/2 rotations on two-qubits systems. Moreover, shapes whose Fourier transform is narrow and sharp, associated with low Rabi frequencies, were demonstrated to generally provide the highest fidelities of the tested configurations. Lastly, the trends and guidelines highlighted by these results were shown to scale to systems with larger numbers of qubits. The correction techniques investigated in this work have proven promising for the implementation of high fidelity single-qubit gates in multi-qubit systems. In particular, the guidelines for selecting a well-performing pulse shape should also be useful for the design of optimised driving schemes, regardless of the number of qubits involved. Additionally, the proposed frequency shift correction algorithm is expected to be able to handle arbitrary shifts, and so to be easily adaptable to use in experiments.
Electron spins trapped in quantum dots have recently proven to be a promising technology for the implementation of qubits, already demonstrating high fidelity single- and two-qubits gates. The next step towards fault-tolerant quantum computing is to increase the number of so-called spin qubits on the processor. However, this poses several challenges, one of which being how to implement single-qubit gates in multi-qubit systems, with high fidelity. This work focused on two aspects. The first one was to identify the physical phenomena and limitations that hinder the realisation of high fidelity single-qubit gates in multi-qubit environments. The second objective was to investigate, implement and optimise methods in order to minimise the impact of these perturbing phenomena. The identified perturbing effects include unwanted driving between a pulse and the neighbouring qubits, as well as frequency shifts induced by drive-spin coupling and non-ideal pulse in experimental setups. Crosstalk was addressed using pulse shaping (i.e. amplitude or phase modulation of the driving pulse to tailor its spectral characteristics and reduce the energy transmitted at unwanted frequencies). The performance of shapes taken from both NMR and signal processing literature was investigated, for various pulse parameters, through an extensive grid search. In addition, a frequency correction algorithm was devised: off-resonant drive frequencies are selected so that the shifted qubits are resonantly driven. It currently accounts for two phenomena: the AC Stark and Bloch-Siegert shifts. The algorithm furthermore tracks the changes caused by the time-dependent characteristics of the shaped pulses. The proposed frequency correction algorithm was shown to almost entirely negate the effects of the considered shifts, leading to unitary fidelity improvements by up to 55%. In addition, pulse shaping was demonstrated to noticeably improve the fidelity of simultaneous single-qubit rotations compared to unshaped driving. Rotations with fidelities as high as 99.98% were obtained for pi/2 rotations on two-qubits systems. Moreover, shapes whose Fourier transform is narrow and sharp, associated with low Rabi frequencies, were demonstrated to generally provide the highest fidelities of the tested configurations. Lastly, the trends and guidelines highlighted by these results were shown to scale to systems with larger numbers of qubits. The correction techniques investigated in this work have proven promising for the implementation of high fidelity single-qubit gates in multi-qubit systems. In particular, the guidelines for selecting a well-performing pulse shape should also be useful for the design of optimised driving schemes, regardless of the number of qubits involved. Additionally, the proposed frequency shift correction algorithm is expected to be able to handle arbitrary shifts, and so to be easily adaptable to use in experiments.
In semiconductor single-spin qubits, high-fidelity quantum gates have been demonstrated; however, achieving consistent performance remains challenging due to variations in driven qubit coherence, which is less explored than free-evolution coherence such as T2∗. Here, we report single-qubit gate fidelities above 99.999%, achieved by dramatically extending the driven-spin coherence time and suppressing off-resonant driving effects that are detrimental to accurate fidelity benchmarking. We demonstrate that removing proximal reservoirs significantly enhances the spin-locking coherence time (T1ρ), a critical metric for qubits under microwave driving. Furthermore, we reveal that in typical spin qubit setups using parity readout and rectangular pulses, off-resonant excitation of neighboring qubits causes substantial benchmarking artifacts. By optimizing device conditions to mitigate microwave-induced degradation and implementing spectrally tailored pulse shaping, we achieve a π/2 gate fidelity of 99.99920(2)%, with remaining errors primarily limited by incoherent noise. These results showcase the mechanisms that bound fidelity benchmarking in state-of-the-art silicon spin qubits and provide practical guidelines for achieving and verifying high fidelities in these systems.
A two-qubit controlled-not (cnot) gate, realized by a controlled-phase (C-phase) gate combined with single-qubit gates, has been experimentally implemented recently for quantum-dot spin qubits in isotopically enriched silicon, a promising solid-state system for practical quantum computation. In the experiments, the single-qubit gates have been demonstrated with fault-tolerant control fidelity, but the infidelity of the two-qubit C-phase gate is, primarily due to the electrical noise, still higher than the required error threshold for fault-tolerant quantum computation (FTQC). Here, by taking the realistic system parameters and the experimental constraints on the control pulses into account, we construct experimentally realizable high-fidelity cnot gates robust against electrical noise with the experimentally measured 1/f1.01 noise spectrum and also against the uncertainty in the interdot tunnel coupling amplitude. Our fine-tuned optimal cnot gate has about two orders of magnitude improvement in gate infidelity over the ideal C-phase gate constructed without considering any noise effect. Furthermore, within the same control framework, high-fidelity and robust single-qubit gates can also be constructed, paving the way for large-scale FTQC.
The growing interest in quantum computers has triggered various approaches for the realization of a large-scale quantum processor that can eventually outperform classical high-performance computers. Quantum computers are attracting increasing attention for their potential to enormously accelerate the simulation of quantum systems and the solution of optimization problems, promising an immense impact, particularly in fields such as chemistry, medicine, and cybersecurity. Although it is still a long way to a practical quantum device, the progress over the last decades has shown encouraging results for a so far limited number of quantum bits, or qubits for short, which represent the computational units of the processor. One promising platform for the implementation of qubits is the spin of charge carriers in semiconductor quantum dots. Especially the use of purified silicon as a host material has significantly improved the performance of quantum operations. Advanced fabrication techniques from the established semiconductor industry in principle allow for the manufacturing of a large number of qubits on a small chip, making them specifically competitive from the perspective of scalability. In this thesis, we investigate challenges for electron spin qubits, particularly in the context of scaling to large qubit arrays for quantum computation. We evaluate the performance of quantum gates, present error mitigation strategies, and propose new quantum operations for two particular spin qubit implementations. In a dense array of Loss-DiVincenzo spin qubits on a chip, quantum information can be electrically controlled by microwave pulses. For neighboring qubits, capacitive couplings of nearby electrodes lead to crosstalk that affects the quantum computation. The first examination in this thesis addresses the effect of crosstalk on idling and operating spin qubits due to an interfering microwave drive. After the analysis and characterization of the performance, we suggest mitigation protocols for different constellations of important quantum gates, which can be easily implemented experimentally. We further show how to reduce crosstalk in a two-qubit gate using an asymmetric driving scheme, resulting in an enormous improvement of the gate performance, and may be used to generally overcome the obstacle of crosstalk. An additional source of errors in spin qubit registers originates from the finite residual exchange interaction between neighboring qubits. It arises due to a finite overlap of the electron wave functions and is caused by the limited speed at which the applied voltages can be controlled. We evaluate the fidelity of doing quantum operations under these circumstances with a varying number of neighboring qubits and present robust mitigation schemes with a decent performance also in the presence of noise. Besides crosstalk, another crucial observation in experiments using microwaves is the heating caused by the delivery of high-power radio frequency pulses to the quantum chip and results in a change of the qubit properties. We therefore investigate the impact of phonons on the energy levels in spin qubits to identify a temperature-dependent correction to the qubit state splitting. As microwave pulses are associated with potential errors, exchange-only qubits represent a promising alternative to achieve universal quantum computation only using baseband control. Therefore, we shift our focus towards exchange-only qubits and outline the main error sources in these systems, including residual exchange interactions between spins, charge noise from the applied voltages, and magnetic fluctuations in the material. A consequential complication of this implementation is that the quantum information can leak out of the qubit states. This effect, however, can be reduced in the presence of a finite magnetic field, as we will demonstrate in this thesis. The gate construction for exchange-only qubits usually requires more pulse steps than in the previous qubit type. Nevertheless, if exchange interactions are switched on simultaneously, this can result in faster quantum gates, as we demonstrate in this thesis. Especially the discovery of a quantum operation that introduces relative phases between computational and leakage states can be of interest for the construction of two-qubit gates and will be discussed in an example for a special operation space.
Practical Quantum computing hinges on the ability to control large numbers of qubits with high fidelity. Quantum dots define a promising platform due to their compatibility with semiconductor manufacturing. Moreover, high-fidelity operations above 99.9% have been realized with individual qubits, though their performance has been limited to 98.67% when driving two qubits simultaneously. Here we present single-qubit randomized benchmarking in a two-dimensional array of spin qubits, finding native gate fidelities as high as 99.992(1)%. Furthermore, we benchmark single qubit gate performance while simultaneously driving two and four qubits, utilizing a novel benchmarking technique called N-copy randomized benchmarking, designed for simple experimental implementation and accurate simultaneous gate fidelity estimation. We find two- and four-copy randomized benchmarking fidelities of 99.905(8)% and 99.34(4)% respectively, and that next-nearest neighbor pairs are highly robust to cross-talk errors. These characterizations of single-qubit gate quality are crucial for scaling up quantum information technology.
Abstract Semiconductor spin qubits demonstrated single-qubit gates with fidelities up to 99.9 % benchmarked in the single-qubit subspace. However, tomographic characterizations reveal non-negligible crosstalk errors in a larger space. Additionally, it was long thought that the two-qubit gate performance is limited by charge noise, which couples to the qubits via the exchange interaction. Here, we show that coherent error sources such as a limited bandwidth of the control signals, diabaticity errors, microwave crosstalk, and non-linear transfer functions can equally limit the fidelity. We report a simple theoretical framework for pulse optimization that relates erroneous dynamics to spectral concentration problems and allows for the reuse of existing signal shaping methods on a larger set of gate operations. We apply this framework to common gate operations for spin qubits and show that simple pulse shaping techniques can significantly improve the performance of these gate operations in the presence of such coherent error sources. The methods presented in the paper were used to demonstrate two-qubit gate fidelities with F > 99.5 % in Xue et al (2022 Nature 601 343). We also find that single and two-qubit gates can be optimized using the same pulse shape. We use analytic derivations and numerical simulations to arrive at predicted gate fidelities greater than 99.9% with duration less than, 4 / ( Δ E z ) where Δ E z is the difference in qubit frequencies.
Abstract Universal quantum computation will require qubit technology based on a scalable platform1, together with quantum error correction protocols that place strict limits on the maximum infidelities for one- and two-qubit gate operations2, 3. Although various qubit systems have shown high fidelities at the one-qubit level4–10, the only solid-state qubits manufactured using standard lithographic techniques that have demonstrated two-qubit fidelities near the fault-tolerance threshold6 have been in superconductor systems. Silicon-based quantum dot qubits are also amenable to large-scale fabrication and can achieve high single-qubit gate fidelities (exceeding 99.9 per cent) using isotopically enriched silicon11, 12. Two-qubit gates have now been demonstrated in a number of systems13–15, but as yet an accurate assessment of their fidelities using Clifford-based randomized benchmarking, which uses sequences of randomly chosen gates to measure the error, has not been achieved. Here, for qubits encoded on the electron spin states of gate-defined quantum dots, we demonstrate Bell state tomography with fidelities ranging from 80 to 89 per cent, and two-qubit randomized benchmarking with an average Clifford gate fidelity of 94.7 per cent and an average controlled-rotation fidelity of 98 per cent. These fidelities are found to be limited by the relatively long gate times used here compared with the decoherence times of the qubits. Silicon qubit designs employing fast gate operations with high Rabi frequencies16, 17, together with advanced pulsing techniques18, should therefore enable much higher fidelities in the near future.