Abstract Semiconductor spin qubits demonstrated single-qubit gates with fidelities up to 99.9 % benchmarked in the single-qubit subspace. However, tomographic characterizations reveal non-negligible crosstalk errors in a larger space. Additionally, it was long thought that the two-qubit gate performance is limited by charge noise, which couples to the qubits via the exchange interaction. Here, we show that coherent error sources such as a limited bandwidth of the control signals, diabaticity errors, microwave crosstalk, and non-linear transfer functions can equally limit the fidelity. We report a simple theoretical framework for pulse optimization that relates erroneous dynamics to spectral concentration problems and allows for the reuse of existing signal shaping methods on a larger set of gate operations. We apply this framework to common gate operations for spin qubits and show that simple pulse shaping techniques can significantly improve the performance of these gate operations in the presence of such coherent error sources. The methods presented in the paper were used to demonstrate two-qubit gate fidelities with F > 99.5 % in Xue et al (2022 Nature 601 343). We also find that single and two-qubit gates can be optimized using the same pulse shape. We use analytic derivations and numerical simulations to arrive at predicted gate fidelities greater than 99.9% with duration less than, 4 / ( Δ E z ) where Δ E z is the difference in qubit frequencies.
Abstract Semiconductor spin qubits demonstrated single-qubit gates with fidelities up to 99.9 % benchmarked in the single-qubit subspace. However, tomographic characterizations reveal non-negligible crosstalk errors in a larger space. Additionally, it was long thought that the two-qubit gate performance is limited by charge noise, which couples to the qubits via the exchange interaction. Here, we show that coherent error sources such as a limited bandwidth of the control signals, diabaticity errors, microwave crosstalk, and non-linear transfer functions can equally limit the fidelity. We report a simple theoretical framework for pulse optimization that relates erroneous dynamics to spectral concentration problems and allows for the reuse of existing signal shaping methods on a larger set of gate operations. We apply this framework to common gate operations for spin qubits and show that simple pulse shaping techniques can significantly improve the performance of these gate operations in the presence of such coherent error sources. The methods presented in the paper were used to demonstrate two-qubit gate fidelities with F > 99.5 % in Xue et al (2022 Nature 601 343). We also find that single and two-qubit gates can be optimized using the same pulse shape. We use analytic derivations and numerical simulations to arrive at predicted gate fidelities greater than 99.9% with duration less than, 4 / ( Δ E z ) where Δ E z is the difference in qubit frequencies.
Single-qubit gates on superconducting quantum processors are typically implemented using microwave pulses applied through dedicated control lines. However, these microwave pulses may also drive other qubits due to crosstalk arising from capacitive coupling and wavefunction overlap in systems with closely spaced transition frequencies. Crosstalk and frequency crowding increase errors during simultaneous single-qubit operations relative to isolated gates, thus forming a major bottleneck for scaling superconducting quantum processors. In this work, we combine model-based qubit frequency optimization with pulse shaping to demonstrate crosstalk error mitigation in single-qubit gates on a 49-qubit superconducting quantum processor. We introduce and experimentally verify an analytical model of simultaneous single-qubit gate error caused by microwave crosstalk that depends on a given pulse shape. By employing a model-based optimization strategy of qubit frequencies, we minimize the crosstalk-induced error across the processor and achieve a mean simultaneous single-qubit gate fidelity of 99.96% for a 16-ns gate duration, approaching the mean individual gate fidelity. To further reduce the simultaneous error and required qubit frequency bandwidth on high-crosstalk qubit pairs, we introduce a crosstalk transition suppression (CTS) pulse shaping technique that minimizes the spectral energy around transitions inducing leakage and crosstalk errors. Finally, we combine CTS with model-based frequency optimization across the device and experimentally show a systematic reduction in the required qubit frequency bandwidth for high-fidelity simultaneous gates, supported by simulations of systems with up to 1000 qubits. By alleviating constraints on qubit frequency bandwidth for parallel single-qubit operations, this work represents an important step for scaling towards larger quantum processors.
In semiconductor single-spin qubits, high-fidelity quantum gates have been demonstrated; however, achieving consistent performance remains challenging due to variations in driven qubit coherence, which is less explored than free-evolution coherence such as T2∗. Here, we report single-qubit gate fidelities above 99.999%, achieved by dramatically extending the driven-spin coherence time and suppressing off-resonant driving effects that are detrimental to accurate fidelity benchmarking. We demonstrate that removing proximal reservoirs significantly enhances the spin-locking coherence time (T1ρ), a critical metric for qubits under microwave driving. Furthermore, we reveal that in typical spin qubit setups using parity readout and rectangular pulses, off-resonant excitation of neighboring qubits causes substantial benchmarking artifacts. By optimizing device conditions to mitigate microwave-induced degradation and implementing spectrally tailored pulse shaping, we achieve a π/2 gate fidelity of 99.99920(2)%, with remaining errors primarily limited by incoherent noise. These results showcase the mechanisms that bound fidelity benchmarking in state-of-the-art silicon spin qubits and provide practical guidelines for achieving and verifying high fidelities in these systems.
A key ingredient for fault-tolerant quantum computers are sufficiently accurate logic gates on single and multiple qubits in the presence of decohering noise. In this thesis, we theoretically develop and experimentally demonstrate such high-fidelity quantum gates for semiconductor-based quantum computing. Specifically, we consider a qubit encoded in the singlet and one triplet state of two electron spins in GaAs. While its potential for optical coupling makes GaAs an attractive material, highly auto-correlated magnetic field noise from fluctuating nuclear spins leads to considerably lower coherence times than for Si-based devices, where nuclear spins can be removed by isotopic purification. In addition to noise, the control methods used in earlier experiments are based on unrealistic approximations. For these reasons, fidelities well above 99 %, as required by current quantum error correction (QEC) schemes, have not been obtained before this thesis. To tackle these issues, we extend the filter function formalism to describe quantum gates and processes in the presence of experimentally relevant non-Markovian noise. Since this formalism can consider all relevant noise sources in a computationally efficient manner, it can be used to find optimal control pulses by numerical optimization, leading to predicted single-qubit gate fidelities of 99.9 %. Furthermore, we deal with the considerable control challenges associated with this qubit type by experimental calibration of the optimized control pulses. To this end, we extend our previous experimental gate set calibration (GSC) routine to remove systematic gate errors on an arbitrary number of qubits. We apply the numerically optimized single-qubit control pulses to our GaAs sample and experimentally calibrate them with GSC. This procedure yields an average gate fidelity of 99.50 ± 0.04 % and a low leakage rate of 0.13 ± 0.03 % out of the computational subspace, characterized by randomized benchmarking. We also optimize realistic two-qubit control pulses, considering current control hardware as well as interqubit Coulomb and exchange coupling that cannot be fully turned off. Using measured noise spectra, we show that two-qubit gate fidelities of 99.90 % can be reached in GaAs, while 99.99 % can be achieved in Si. These results demonstrate that high-fidelity gates can be realized even in the presence of nuclear spins as in GaAs.
Electron spins trapped in quantum dots have recently proven to be a promising technology for the implementation of qubits, already demonstrating high fidelity single- and two-qubits gates. The next step towards fault-tolerant quantum computing is to increase the number of so-called spin qubits on the processor. However, this poses several challenges, one of which being how to implement single-qubit gates in multi-qubit systems, with high fidelity. This work focused on two aspects. The first one was to identify the physical phenomena and limitations that hinder the realisation of high fidelity single-qubit gates in multi-qubit environments. The second objective was to investigate, implement and optimise methods in order to minimise the impact of these perturbing phenomena. The identified perturbing effects include unwanted driving between a pulse and the neighbouring qubits, as well as frequency shifts induced by drive-spin coupling and non-ideal pulse in experimental setups. Crosstalk was addressed using pulse shaping (i.e. amplitude or phase modulation of the driving pulse to tailor its spectral characteristics and reduce the energy transmitted at unwanted frequencies). The performance of shapes taken from both NMR and signal processing literature was investigated, for various pulse parameters, through an extensive grid search. In addition, a frequency correction algorithm was devised: off-resonant drive frequencies are selected so that the shifted qubits are resonantly driven. It currently accounts for two phenomena: the AC Stark and Bloch-Siegert shifts. The algorithm furthermore tracks the changes caused by the time-dependent characteristics of the shaped pulses. The proposed frequency correction algorithm was shown to almost entirely negate the effects of the considered shifts, leading to unitary fidelity improvements by up to 55%. In addition, pulse shaping was demonstrated to noticeably improve the fidelity of simultaneous single-qubit rotations compared to unshaped driving. Rotations with fidelities as high as 99.98% were obtained for pi/2 rotations on two-qubits systems. Moreover, shapes whose Fourier transform is narrow and sharp, associated with low Rabi frequencies, were demonstrated to generally provide the highest fidelities of the tested configurations. Lastly, the trends and guidelines highlighted by these results were shown to scale to systems with larger numbers of qubits. The correction techniques investigated in this work have proven promising for the implementation of high fidelity single-qubit gates in multi-qubit systems. In particular, the guidelines for selecting a well-performing pulse shape should also be useful for the design of optimised driving schemes, regardless of the number of qubits involved. Additionally, the proposed frequency shift correction algorithm is expected to be able to handle arbitrary shifts, and so to be easily adaptable to use in experiments.
Semiconductor double quantum-dot hybrid qubits are promising candidates for high-fidelity quantum computing. However, their performance is limited by charge noise, which is ubiquitous in solid-state devices, and phonon-induced dephasing. Here we explore methods for improving the quantum operations of a hybrid qubit, using strong microwave driving to enable gate operations that are much faster than decoherence processes. Using numerical simulations and a theoretical method based on a cumulant expansion, we analyze qubit dynamics in the presence of 1/f charge noise, which forms the dominant decoherence mechanism in many solid-state devices. We show that, while strong-driving effects and charge noise both reduce the quantum gate fidelity, simple pulse-shaping techniques effectively suppress the strong-driving effects. Moreover, a broad AC sweet spot emerges when the detuning parameter and the tunneling coupling are driven simultaneously. Taking into account phonon-mediated noise, we find that it should be possible to achieve ${X}_{\ensuremath{\pi}}$ gates with fidelities higher than 99.9.
Maintaining or even improving gate performance with growing numbers of parallel controlled qubits is a vital requirement for fault-tolerant quantum computing.For superconducting quantum processors, though isolated one-or two-qubit gates have been demonstrated with high fidelity, implementing these gates in parallel commonly shows worse performance.Generally, this degradation is attributed to various crosstalks between qubits, such as quantum crosstalk due to residual inter-qubit coupling.An understanding of the exact nature of these crosstalks is critical to figuring out respective mitigation schemes and improved qubit architecture designs with low crosstalk.Here we give a theoretical analysis of quantum crosstalk impact on simultaneous gate operations in a qubit architecture, where fixed-frequency transmon qubits are coupled via a tunable bus, and sub-100-ns controlled-Z (CZ) gates can be realized by applying a baseband flux pulse on the bus.Our analysis shows that for microwave-driven single-qubit gates, the dressing from the qubit-qubit coupling can cause non-negligible cross-driving errors when qubits operate near frequency collision regions.During CZ gate operations, although unwanted nearest-neighbor interactions are nominally turned off, sub-MHz parasitic next-nearest-neighbor interactions involving spectator qubits can still exist, causing considerable leakage or control error when one operates qubit systems around these parasitic resonance points.To ensure high-fidelity simultaneous operations, a request could be raised to figure out a better way to balance the gate error from target qubit systems themselves and the error from nonparticipating spectator qubits.Overall, our analysis suggests that towards useful quantum processors, the qubit architecture should be examined carefully in the context of high-fidelity simultaneous gate operations in a scalable qubit lattice.