Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2507.11918 · Nature Physics

Simultaneous high-fidelity single-qubit gates in a spin qubit array

Yi-Hsien Wu, Leon C. Camenzind, Patrick Bütler, Ik Kyeong Jin, Akito Noiri, Kenta Takeda, Takashi Nakajima, Takashi Kobayashi, Giordano Scappucci, Hsi‐Sheng Goan, Seigo Tarucha

Published Oct 15, 2026• 4 citations
arXivHTMLPDF

Abstract

Abstract Silicon spin qubits offer a promising path to scalable quantum computing due to their compatibility with industrial semiconductor manufacturing. A key requirement for scaling quantum processors is the ability to perform high-fidelity operations in parallel across many qubits. However, simultaneous control remains a major challenge in silicon devices, as fidelities typically degrade under parallel operation. Here we identify microwave-drive-induced a.c.-Stark shifts as the dominant source of this degradation in a five-qubit silicon spin array. We address this by introducing a scalable mitigation protocol based solely on pairwise phase calibrations. Using tailored control pulses on a shared control line, we achieve primitive X and Y gate fidelities well above 99.99% for each qubit individually, with some approaching 99.999%. Furthermore, these fidelities are preserved above 99.99% during simultaneous operation of up to three qubits. During parallel five-qubit operation, fidelities remain above the widely targeted fault-tolerant threshold of 99.9%. By maintaining high-fidelity control during simultaneous operation, shared qubit-control lines can support the development of large-scale semiconductor quantum processors.

DOI
10.1038/s41567-026-03466-2

Related papers

Simultaneous single-qubit driving of semiconductor spin qubits at the fault-tolerant threshold

William I. L. Lawrie, Maximilian Rimbach-Russ, F. van Riggelen +6 more

Practical Quantum computing hinges on the ability to control large numbers of qubits with high fidelity. Quantum dots define a promising platform due to their compatibility with semiconductor manufacturing. Moreover, high-fidelity operations above 99.9% have been realized with individual qubits, though their performance has been limited to 98.67% when driving two qubits simultaneously. Here we present single-qubit randomized benchmarking in a two-dimensional array of spin qubits, finding native gate fidelities as high as 99.992(1)%. Furthermore, we benchmark single qubit gate performance while simultaneously driving two and four qubits, utilizing a novel benchmarking technique called N-copy randomized benchmarking, designed for simple experimental implementation and accurate simultaneous gate fidelity estimation. We find two- and four-copy randomized benchmarking fidelities of 99.905(8)% and 99.34(4)% respectively, and that next-nearest neighbor pairs are highly robust to cross-talk errors. These characterizations of single-qubit gate quality are crucial for scaling up quantum information technology.

arXiv:2109.07837•Nature Communications•Jun 19, 2023•79 citations

Simultaneous driving of semiconductor spin qubits at the fault-tolerant threshold

William I. L. Lawrie, Maximilian Russ, F. van Riggelen +5 more

The promise of quantum information technology hinges on the ability to control large numbers of qubits with high-fidelity. Quantum dots define a promising platform due to their compatibility with semiconductor manufacturing. Moreover, high-fidelity operations above 99.9% have been realized with individual qubits, though their performance has been limited to 98.67% when driving two qubits simultaneously. Here we present single-qubit randomized benchmarking in a two-dimensional array of spin qubits, for one, two and four simultaneously driven qubits. We find that by carefully tuning the qubit parameters, we achieve native gate fidelities of 99.9899(4)%, 99.904(4)% and 99.00(4)% respectively. We also find that cross talk with next-nearest neighbor pairs induces errors that can be imperceptible within the error margin, indicating that cross talk can be highly local. These characterizations of the single-qubit gate quality and the ability to operate simultaneously are crucial aspects for scaling up germanium based quantum information technology.

•Sep 16, 2021•9 citations

Quantum logic with spin qubits crossing the surface code threshold

Xiao Xue, Maximilian Rimbach-Russ, Nodar Samkharadze +4 more

Abstract High-fidelity control of quantum bits is paramount for the reliable execution of quantum algorithms and for achieving fault tolerance—the ability to correct errors faster than they occur 1 . The central requirement for fault tolerance is expressed in terms of an error threshold. Whereas the actual threshold depends on many details, a common target is the approximately 1% error threshold of the well-known surface code 2,3 . Reaching two-qubit gate fidelities above 99% has been a long-standing major goal for semiconductor spin qubits. These qubits are promising for scaling, as they can leverage advanced semiconductor technology 4 . Here we report a spin-based quantum processor in silicon with single-qubit and two-qubit gate fidelities, all of which are above 99.5%, extracted from gate-set tomography. The average single-qubit gate fidelities remain above 99% when including crosstalk and idling errors on the neighbouring qubit. Using this high-fidelity gate set, we execute the demanding task of calculating molecular ground-state energies using a variational quantum eigensolver algorithm 5 . Having surpassed the 99% barrier for the two-qubit gate fidelity, semiconductor qubits are well positioned on the path to fault tolerance and to possible applications in the era of noisy intermediate-scale quantum devices.

arXiv:2107.00628•Nature•Jan 19, 2022•523 citations

Mitigating crosstalk errors for simultaneous single-qubit gates on a superconducting quantum processor

Jaap J. Wesdorp, Eric Hyyppä, Joona Andersson +61 more

Single-qubit gates on superconducting quantum processors are typically implemented using microwave pulses applied through dedicated control lines. However, these microwave pulses may also drive other qubits due to crosstalk arising from capacitive coupling and wavefunction overlap in systems with closely spaced transition frequencies. Crosstalk and frequency crowding increase errors during simultaneous single-qubit operations relative to isolated gates, thus forming a major bottleneck for scaling superconducting quantum processors. In this work, we combine model-based qubit frequency optimization with pulse shaping to demonstrate crosstalk error mitigation in single-qubit gates on a 49-qubit superconducting quantum processor. We introduce and experimentally verify an analytical model of simultaneous single-qubit gate error caused by microwave crosstalk that depends on a given pulse shape. By employing a model-based optimization strategy of qubit frequencies, we minimize the crosstalk-induced error across the processor and achieve a mean simultaneous single-qubit gate fidelity of 99.96% for a 16-ns gate duration, approaching the mean individual gate fidelity. To further reduce the simultaneous error and required qubit frequency bandwidth on high-crosstalk qubit pairs, we introduce a crosstalk transition suppression (CTS) pulse shaping technique that minimizes the spectral energy around transitions inducing leakage and crosstalk errors. Finally, we combine CTS with model-based frequency optimization across the device and experimentally show a systematic reduction in the required qubit frequency bandwidth for high-fidelity simultaneous gates, supported by simulations of systems with up to 1000 qubits. By alleviating constraints on qubit frequency bandwidth for parallel single-qubit operations, this work represents an important step for scaling towards larger quantum processors.

quant-pharXiv:2603.11018•Mar 12, 2026•0 citations

Robust iswap gates for semiconductor spin qubits with local driving

Qi-Pei Liu, Zheng‐Yuan Xue

Scalable quantum computation demands high-fidelity two-qubit gates. However, decoherence and control errors are inevitable, which can decrease the quality of implemented quantum operations. We propose a robust iswap gate protocol for semiconductor spin qubits, which is a promising platform for scalable quantum computing. Our scheme uses only local microwave drives on conventional exchange-coupled spin qubits. This approach simultaneously addresses two critical challenges to semiconductor quantum computing: It suppresses low-frequency noise via continuous dynamical decoupling, and it circumvents the control difficulties associated with the ac modulation of the exchange interaction. We further develop a composite pulse sequence to remove drive-strength constraints and a dynamically corrected method to provide first-order immunity to microwave amplitude errors. Numerical simulations confirm that our scheme can achieve fidelity above the fault-tolerance threshold under current experimental conditions, offering a building block for practical quantum processors.

arXiv:2510.04462•Physical Review A•Oct 7, 2025•0 citations

Assessing fidelity-limiting factors and achieving single-qubit gate fidelity beyond 99.999% in driven silicon spin qubits

Kenta Takeda, Akito Noiri, Takashi Nakajima +4 more

In semiconductor single-spin qubits, high-fidelity quantum gates have been demonstrated; however, achieving consistent performance remains challenging due to variations in driven qubit coherence, which is less explored than free-evolution coherence such as $T_2^*$. Here, we report single-qubit gate fidelities above 99.999%, achieved by dramatically extending the driven-spin coherence time and suppressing off-resonant driving effects that are detrimental to accurate fidelity benchmarking. We demonstrate that removing proximal reservoirs significantly enhances the spin-locking coherence time ($T_{1ρ}$), a critical metric for qubits under microwave driving. Furthermore, we reveal that in typical spin qubit setups using parity readout and rectangular pulses, off-resonant excitation of neighboring qubits causes substantial benchmarking artifacts. By optimizing device conditions to mitigate microwave-induced degradation and implementing spectrally tailored pulse shaping, we achieve a $π/2$ gate fidelity of 99.99920(2)%, with remaining errors primarily limited by incoherent noise. These results showcase the mechanisms that bound fidelity benchmarking in state-of-the-art silicon spin qubits and provide practical guidelines for achieving and verifying high fidelities in these systems.

cond-mat.mes-hallCross-listedarXiv:2608.11072•Aug 12, 2026
Abstract Silicon spin qubits offer a promising path to scalable quantum computing due to their compatibility with industrial semiconductor manufacturing. A key requirement for scaling quantum processors is the ability to perform high-fidelity operations in parallel across many qubits. However, simultaneous control remains a major challenge in silicon devices, as fidelities typically degrade under parallel operation. Here we identify microwave-drive-induced a.c.-Stark shifts as the dominant source of this degradation in a five-qubit silicon spin array. We address this by introducing a scalable mitigation protocol based solely on pairwise phase calibrations. Using tailored control pulses on a shared control line, we achieve primitive X and Y gate fidelities well above 99.99% for each qubit individually, with some approaching 99.999%. Furthermore, these fidelities are preserved above 99.99% during simultaneous operation of up to three qubits. During parallel five-qubit operation, fidelities remain above the widely targeted fault-tolerant threshold of 99.9%. By maintaining high-fidelity control during simultaneous operation, shared qubit-control lines can support the development of large-scale semiconductor quantum processors.
Practical Quantum computing hinges on the ability to control large numbers of qubits with high fidelity. Quantum dots define a promising platform due to their compatibility with semiconductor manufacturing. Moreover, high-fidelity operations above 99.9% have been realized with individual qubits, though their performance has been limited to 98.67% when driving two qubits simultaneously. Here we present single-qubit randomized benchmarking in a two-dimensional array of spin qubits, finding native gate fidelities as high as 99.992(1)%. Furthermore, we benchmark single qubit gate performance while simultaneously driving two and four qubits, utilizing a novel benchmarking technique called N-copy randomized benchmarking, designed for simple experimental implementation and accurate simultaneous gate fidelity estimation. We find two- and four-copy randomized benchmarking fidelities of 99.905(8)% and 99.34(4)% respectively, and that next-nearest neighbor pairs are highly robust to cross-talk errors. These characterizations of single-qubit gate quality are crucial for scaling up quantum information technology.
The promise of quantum information technology hinges on the ability to control large numbers of qubits with high-fidelity. Quantum dots define a promising platform due to their compatibility with semiconductor manufacturing. Moreover, high-fidelity operations above 99.9% have been realized with individual qubits, though their performance has been limited to 98.67% when driving two qubits simultaneously. Here we present single-qubit randomized benchmarking in a two-dimensional array of spin qubits, for one, two and four simultaneously driven qubits. We find that by carefully tuning the qubit parameters, we achieve native gate fidelities of 99.9899(4)%, 99.904(4)% and 99.00(4)% respectively. We also find that cross talk with next-nearest neighbor pairs induces errors that can be imperceptible within the error margin, indicating that cross talk can be highly local. These characterizations of the single-qubit gate quality and the ability to operate simultaneously are crucial aspects for scaling up germanium based quantum information technology.
Abstract High-fidelity control of quantum bits is paramount for the reliable execution of quantum algorithms and for achieving fault tolerance—the ability to correct errors faster than they occur 1 . The central requirement for fault tolerance is expressed in terms of an error threshold. Whereas the actual threshold depends on many details, a common target is the approximately 1% error threshold of the well-known surface code 2,3 . Reaching two-qubit gate fidelities above 99% has been a long-standing major goal for semiconductor spin qubits. These qubits are promising for scaling, as they can leverage advanced semiconductor technology 4 . Here we report a spin-based quantum processor in silicon with single-qubit and two-qubit gate fidelities, all of which are above 99.5%, extracted from gate-set tomography. The average single-qubit gate fidelities remain above 99% when including crosstalk and idling errors on the neighbouring qubit. Using this high-fidelity gate set, we execute the demanding task of calculating molecular ground-state energies using a variational quantum eigensolver algorithm 5 . Having surpassed the 99% barrier for the two-qubit gate fidelity, semiconductor qubits are well positioned on the path to fault tolerance and to possible applications in the era of noisy intermediate-scale quantum devices.
Single-qubit gates on superconducting quantum processors are typically implemented using microwave pulses applied through dedicated control lines. However, these microwave pulses may also drive other qubits due to crosstalk arising from capacitive coupling and wavefunction overlap in systems with closely spaced transition frequencies. Crosstalk and frequency crowding increase errors during simultaneous single-qubit operations relative to isolated gates, thus forming a major bottleneck for scaling superconducting quantum processors. In this work, we combine model-based qubit frequency optimization with pulse shaping to demonstrate crosstalk error mitigation in single-qubit gates on a 49-qubit superconducting quantum processor. We introduce and experimentally verify an analytical model of simultaneous single-qubit gate error caused by microwave crosstalk that depends on a given pulse shape. By employing a model-based optimization strategy of qubit frequencies, we minimize the crosstalk-induced error across the processor and achieve a mean simultaneous single-qubit gate fidelity of 99.96% for a 16-ns gate duration, approaching the mean individual gate fidelity. To further reduce the simultaneous error and required qubit frequency bandwidth on high-crosstalk qubit pairs, we introduce a crosstalk transition suppression (CTS) pulse shaping technique that minimizes the spectral energy around transitions inducing leakage and crosstalk errors. Finally, we combine CTS with model-based frequency optimization across the device and experimentally show a systematic reduction in the required qubit frequency bandwidth for high-fidelity simultaneous gates, supported by simulations of systems with up to 1000 qubits. By alleviating constraints on qubit frequency bandwidth for parallel single-qubit operations, this work represents an important step for scaling towards larger quantum processors.
Scalable quantum computation demands high-fidelity two-qubit gates. However, decoherence and control errors are inevitable, which can decrease the quality of implemented quantum operations. We propose a robust iswap gate protocol for semiconductor spin qubits, which is a promising platform for scalable quantum computing. Our scheme uses only local microwave drives on conventional exchange-coupled spin qubits. This approach simultaneously addresses two critical challenges to semiconductor quantum computing: It suppresses low-frequency noise via continuous dynamical decoupling, and it circumvents the control difficulties associated with the ac modulation of the exchange interaction. We further develop a composite pulse sequence to remove drive-strength constraints and a dynamically corrected method to provide first-order immunity to microwave amplitude errors. Numerical simulations confirm that our scheme can achieve fidelity above the fault-tolerance threshold under current experimental conditions, offering a building block for practical quantum processors.
In semiconductor single-spin qubits, high-fidelity quantum gates have been demonstrated; however, achieving consistent performance remains challenging due to variations in driven qubit coherence, which is less explored than free-evolution coherence such as T2∗T_2^*T2∗​. Here, we report single-qubit gate fidelities above 99.999%, achieved by dramatically extending the driven-spin coherence time and suppressing off-resonant driving effects that are detrimental to accurate fidelity benchmarking. We demonstrate that removing proximal reservoirs significantly enhances the spin-locking coherence time (T1ρT_{1ρ}T1ρ​), a critical metric for qubits under microwave driving. Furthermore, we reveal that in typical spin qubit setups using parity readout and rectangular pulses, off-resonant excitation of neighboring qubits causes substantial benchmarking artifacts. By optimizing device conditions to mitigate microwave-induced degradation and implementing spectrally tailored pulse shaping, we achieve a π/2π/2π/2 gate fidelity of 99.99920(2)%, with remaining errors primarily limited by incoherent noise. These results showcase the mechanisms that bound fidelity benchmarking in state-of-the-art silicon spin qubits and provide practical guidelines for achieving and verifying high fidelities in these systems.