Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Physics B

Fast qubit initialization in a superconducting circuit*

Tianqi Huang, Wen Zheng, Shuqing Song, Yuqian Dong, Xiaopei Yang, Zhikun Han, Dong Lan, Xinsheng Tan

Published May 8, 2021• 0 citations
Publisher

Abstract

We demonstrate an active reset protocol in a superconducting quantum circuit. The thermal population on the excited state of a transmon qubit is reduced through driving the transitions between the qubit and an ancillary qubit. Furthermore, we investigate the efficiency of this approach at different temperatures. The result shows that population in the first excited state can be dropped from 7% to 2.55% in 27 ns at 30 mK. The efficiency improves as the temperature increases. Compared to other schemes, our proposal alleviates the requirements for measurement procedure and equipment. With the increase of qubit integration, the fast reset technique holds the promise of improving the fidelity of quantum control.

DOI
10.1088/1674-1056/abff2b

Related papers

Fast Reset Protocol for Superconducting Transmon Qubits

Wei-Ping Yuan, Zhicheng He, Sai Li +1 more

For larger-scale quantum information processing, qubit reset plays an important role, as the coherent times for qubits are limited. However, previous schemes require either long reset times or a complex pulse calibration technique, leading to low efficiency in qubit reset. Here, we propose a fast and simple reset protocol for superconducting transmon qubits based on the coupler-coupled qubits architecture. In this setup, a mixing pulse is used to transfer the qubit excitation to the combined excitation of a low-qulity coupler and readout resonator, which will quickly decay to their respectively ground states, leading to efficient qubit reset to the ground state. Our numerical results show that the residual population of the qubit’s excited state can be suppressed to 0.04% within 28 ns; the reset time will be 283 ns if photon depletion of the readout resonator is required. Thus, our protocol provides a promising way for the high-efficiency superconducting qubit reset.

Applied Sciences•Jan 6, 2023•0 citations

Rapid and unconditional parametric reset protocol for tunable superconducting qubits

Yu Zhou, Zhenxing Zhang, Zelong Yin +16 more

Qubit initialization is a critical task in quantum computation and communication. Extensive efforts have been made to achieve this with high speed, efficiency and scalability. However, previous approaches have either been measurement-based and required fast feedback, suffered from crosstalk or required sophisticated calibration. Here, we report a fast and high-fidelity reset scheme, avoiding the issues above without any additional chip architecture. By modulating the flux through a transmon qubit, we realize a swap between the qubit and its readout resonator that suppresses the excited state population to 0.08% ± 0.08% within 34 ns (284 ns if photon depletion of the resonator is required). Furthermore, our approach (i) can achieve effective second excited state depletion, (ii) has negligible effects on neighboring qubits, and (iii) offers a way to entangle the qubit with an itinerant single photon, useful in quantum communication applications.

arXiv:2103.11315•Nature Communications•Oct 11, 2021•80 citations

Multipurpose architecture for fast reset and protective readout of superconducting qubits

Jiayu Ding, Yulong Li, He Wang +12 more

The ability to fast reset a qubit state is crucial for quantum information processing. However, to actively reset a qubit requires engineering a pathway to interact with a dissipative bath, which often comes at the cost of reduced qubit protection from the environment. Here, we present a multipurpose architecture that enables fast reset and protection of superconducting qubits during control and readout. In our design, two on-chip diplexers are connected by two transmission lines. The high-pass branch provides a flat passband for convenient allocation of readout resonators above the qubit frequencies, which is preferred for reducing measurement-induced state transitions. In the low-pass branch, we leverage a standing-wave mode below the maximum qubit frequency for a rapid reset. The qubits are located in the common stopband to inhibit dissipation during coherent operations. We demonstrate resetting a transmon qubit from its first excited state to the ground state in 100 ns, achieving a residual population of 2.7%. The reset time may be further shortened to 27 ns by exploiting the coherent population inversion effect. We further extend the technique to resetting the qubit from its second excited state. Our approach promises scalable implementation of fast reset and qubit protection during control and readout, adding to the toolbox of dissipation engineering.

arXiv:2407.21332•Physical Review Applied•Jan 6, 2025•8 citations

High-Fidelity Transmon Reset with a Multimode Acoustic Resonator

Andraž Omahen, Simon Storz, Igor Kladarić +1 more

Achieving sufficiently low residual excited-state populations remains a key challenge in superconducting quantum circuits, particularly for protocols operating close to noise limits or requiring repeated qubit initialization. Existing protocols primarily address this challenge through sophisticated control, engineered dissipation, or feedback mechanisms. Here, we demonstrate an alternative approach in which a superconducting qubit is reset using a physically distinct, intrinsically colder phononic bath. Specifically, we interface a transmon with a high-overtone bulk acoustic resonator (HBAR), enabling cooling of the qubit into GHz-frequency modes. Using this approach, we achieve a residual excited-state population of the qubit below $10^{-4}$, representing an improvement of one to two orders of magnitude compared to existing reset schemes. These results highlight the potential of phononic baths as a resource for high-fidelity qubit initialization in superconducting circuits.

quant-pharXiv:2604.08655•Physical Review Applied•Apr 13, 2026•0 citations

Pulsed Reset Protocol for Fixed-Frequency Superconducting Qubits

D.J. Egger, M. Werninghaus, Marc Ganzhorn +4 more

The unconditional and fast reset of fixed-frequency superconducting qubits is crucial for the operation of near-term quantum computers at elevated trigger rates. Many reset schemes are either conditional (depend on the qubit's state) or require flux tunability. This study presents an all-microwave pulsed reset sequence that uses the readout resonator to unconditionally empty a fixed-frequency transmon qubit, and that also reduces the qubit thermal population. This method could be used to increase the repetition rate of a superconducting quantum computer running, for example, variational eigensolvers requiring many measurements.

arXiv:1802.08980•Physical Review Applied•Oct 10, 2018•76 citations

Initial experimental results on a superconducting-qubit reset based on photon-assisted quasiparticle tunneling

Vasilii Sevriuk, Wei Liu, Jami Rönkkö +15 more

We present here our recent results on qubit reset scheme based on a quantum-circuit refrigerator (QCR). In particular, we use the photon-assisted quasiparticle tunneling through a superconductor–insulator–normal-metal–insulator–superconductor junction to controllably decrease the energy relaxation time of the qubit during the QCR operation. In our experiment, we use a transmon qubit with dispersive readout. The QCR is capacitively coupled to the qubit through its normal-metal island. We employ rapid, square-shaped QCR control voltage pulses with durations in the range of 2–350 ns and a variety of amplitudes to optimize the reset time and fidelity. Consequently, we reach a qubit ground-state probability of roughly 97% with 80-ns pulses starting from the first excited state. The qubit state probability is extracted from averaged readout signal, where the calibration is based on Rabi oscillations, thus not distinguishing the residual thermal population of the qubit.

arXiv:2212.01065•Applied Physics Letters•Dec 5, 2022•13 citations
We demonstrate an active reset protocol in a superconducting quantum circuit. The thermal population on the excited state of a transmon qubit is reduced through driving the transitions between the qubit and an ancillary qubit. Furthermore, we investigate the efficiency of this approach at different temperatures. The result shows that population in the first excited state can be dropped from 7% to 2.55% in 27 ns at 30 mK. The efficiency improves as the temperature increases. Compared to other schemes, our proposal alleviates the requirements for measurement procedure and equipment. With the increase of qubit integration, the fast reset technique holds the promise of improving the fidelity of quantum control.
For larger-scale quantum information processing, qubit reset plays an important role, as the coherent times for qubits are limited. However, previous schemes require either long reset times or a complex pulse calibration technique, leading to low efficiency in qubit reset. Here, we propose a fast and simple reset protocol for superconducting transmon qubits based on the coupler-coupled qubits architecture. In this setup, a mixing pulse is used to transfer the qubit excitation to the combined excitation of a low-qulity coupler and readout resonator, which will quickly decay to their respectively ground states, leading to efficient qubit reset to the ground state. Our numerical results show that the residual population of the qubit’s excited state can be suppressed to 0.04% within 28 ns; the reset time will be 283 ns if photon depletion of the readout resonator is required. Thus, our protocol provides a promising way for the high-efficiency superconducting qubit reset.
Qubit initialization is a critical task in quantum computation and communication. Extensive efforts have been made to achieve this with high speed, efficiency and scalability. However, previous approaches have either been measurement-based and required fast feedback, suffered from crosstalk or required sophisticated calibration. Here, we report a fast and high-fidelity reset scheme, avoiding the issues above without any additional chip architecture. By modulating the flux through a transmon qubit, we realize a swap between the qubit and its readout resonator that suppresses the excited state population to 0.08% ± 0.08% within 34 ns (284 ns if photon depletion of the resonator is required). Furthermore, our approach (i) can achieve effective second excited state depletion, (ii) has negligible effects on neighboring qubits, and (iii) offers a way to entangle the qubit with an itinerant single photon, useful in quantum communication applications.
The ability to fast reset a qubit state is crucial for quantum information processing. However, to actively reset a qubit requires engineering a pathway to interact with a dissipative bath, which often comes at the cost of reduced qubit protection from the environment. Here, we present a multipurpose architecture that enables fast reset and protection of superconducting qubits during control and readout. In our design, two on-chip diplexers are connected by two transmission lines. The high-pass branch provides a flat passband for convenient allocation of readout resonators above the qubit frequencies, which is preferred for reducing measurement-induced state transitions. In the low-pass branch, we leverage a standing-wave mode below the maximum qubit frequency for a rapid reset. The qubits are located in the common stopband to inhibit dissipation during coherent operations. We demonstrate resetting a transmon qubit from its first excited state to the ground state in 100 ns, achieving a residual population of 2.7%. The reset time may be further shortened to 27 ns by exploiting the coherent population inversion effect. We further extend the technique to resetting the qubit from its second excited state. Our approach promises scalable implementation of fast reset and qubit protection during control and readout, adding to the toolbox of dissipation engineering.
Achieving sufficiently low residual excited-state populations remains a key challenge in superconducting quantum circuits, particularly for protocols operating close to noise limits or requiring repeated qubit initialization. Existing protocols primarily address this challenge through sophisticated control, engineered dissipation, or feedback mechanisms. Here, we demonstrate an alternative approach in which a superconducting qubit is reset using a physically distinct, intrinsically colder phononic bath. Specifically, we interface a transmon with a high-overtone bulk acoustic resonator (HBAR), enabling cooling of the qubit into GHz-frequency modes. Using this approach, we achieve a residual excited-state population of the qubit below 10−410^{-4}10−4, representing an improvement of one to two orders of magnitude compared to existing reset schemes. These results highlight the potential of phononic baths as a resource for high-fidelity qubit initialization in superconducting circuits.
The unconditional and fast reset of fixed-frequency superconducting qubits is crucial for the operation of near-term quantum computers at elevated trigger rates. Many reset schemes are either conditional (depend on the qubit's state) or require flux tunability. This study presents an all-microwave pulsed reset sequence that uses the readout resonator to unconditionally empty a fixed-frequency transmon qubit, and that also reduces the qubit thermal population. This method could be used to increase the repetition rate of a superconducting quantum computer running, for example, variational eigensolvers requiring many measurements.
We present here our recent results on qubit reset scheme based on a quantum-circuit refrigerator (QCR). In particular, we use the photon-assisted quasiparticle tunneling through a superconductor–insulator–normal-metal–insulator–superconductor junction to controllably decrease the energy relaxation time of the qubit during the QCR operation. In our experiment, we use a transmon qubit with dispersive readout. The QCR is capacitively coupled to the qubit through its normal-metal island. We employ rapid, square-shaped QCR control voltage pulses with durations in the range of 2–350 ns and a variety of amplitudes to optimize the reset time and fidelity. Consequently, we reach a qubit ground-state probability of roughly 97% with 80-ns pulses starting from the first excited state. The qubit state probability is extracted from averaged readout signal, where the calibration is based on Rabi oscillations, thus not distinguishing the residual thermal population of the qubit.