Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Sciences

Fast Reset Protocol for Superconducting Transmon Qubits

Wei-Ping Yuan, Zhicheng He, Sai Li, Zheng‐Yuan Xue

Published Jan 6, 2023• 0 citations
Publisher

Abstract

For larger-scale quantum information processing, qubit reset plays an important role, as the coherent times for qubits are limited. However, previous schemes require either long reset times or a complex pulse calibration technique, leading to low efficiency in qubit reset. Here, we propose a fast and simple reset protocol for superconducting transmon qubits based on the coupler-coupled qubits architecture. In this setup, a mixing pulse is used to transfer the qubit excitation to the combined excitation of a low-qulity coupler and readout resonator, which will quickly decay to their respectively ground states, leading to efficient qubit reset to the ground state. Our numerical results show that the residual population of the qubit’s excited state can be suppressed to 0.04% within 28 ns; the reset time will be 283 ns if photon depletion of the readout resonator is required. Thus, our protocol provides a promising way for the high-efficiency superconducting qubit reset.

DOI
10.3390/app13020817

Related papers

Rapid and unconditional parametric reset protocol for tunable superconducting qubits

Yu Zhou, Zhenxing Zhang, Zelong Yin +16 more

Qubit initialization is a critical task in quantum computation and communication. Extensive efforts have been made to achieve this with high speed, efficiency and scalability. However, previous approaches have either been measurement-based and required fast feedback, suffered from crosstalk or required sophisticated calibration. Here, we report a fast and high-fidelity reset scheme, avoiding the issues above without any additional chip architecture. By modulating the flux through a transmon qubit, we realize a swap between the qubit and its readout resonator that suppresses the excited state population to 0.08% ± 0.08% within 34 ns (284 ns if photon depletion of the resonator is required). Furthermore, our approach (i) can achieve effective second excited state depletion, (ii) has negligible effects on neighboring qubits, and (iii) offers a way to entangle the qubit with an itinerant single photon, useful in quantum communication applications.

arXiv:2103.11315•Nature Communications•Oct 11, 2021•80 citations

Multipurpose architecture for fast reset and protective readout of superconducting qubits

Jiayu Ding, Yulong Li, He Wang +12 more

The ability to fast reset a qubit state is crucial for quantum information processing. However, to actively reset a qubit requires engineering a pathway to interact with a dissipative bath, which often comes at the cost of reduced qubit protection from the environment. Here, we present a multipurpose architecture that enables fast reset and protection of superconducting qubits during control and readout. In our design, two on-chip diplexers are connected by two transmission lines. The high-pass branch provides a flat passband for convenient allocation of readout resonators above the qubit frequencies, which is preferred for reducing measurement-induced state transitions. In the low-pass branch, we leverage a standing-wave mode below the maximum qubit frequency for a rapid reset. The qubits are located in the common stopband to inhibit dissipation during coherent operations. We demonstrate resetting a transmon qubit from its first excited state to the ground state in 100 ns, achieving a residual population of 2.7%. The reset time may be further shortened to 27 ns by exploiting the coherent population inversion effect. We further extend the technique to resetting the qubit from its second excited state. Our approach promises scalable implementation of fast reset and qubit protection during control and readout, adding to the toolbox of dissipation engineering.

arXiv:2407.21332•Physical Review Applied•Jan 6, 2025•8 citations

Fast and Unconditional All-Microwave Reset of a Superconducting Qubit

Paul Magnard, Philipp Kurpiers, Baptiste Royer +8 more

Active qubit reset is a key operation in many quantum algorithms, and particularly in quantum error correction. Here, we experimentally demonstrate a reset scheme for a three-level transmon artificial atom coupled to a large bandwidth resonator. The reset protocol uses a microwave-induced interaction between the |f,0⟩ and |g,1⟩ states of the coupled transmon-resonator system, with |g⟩ and |f⟩ denoting the ground and second excited states of the transmon, and |0⟩ and |1⟩ the photon Fock states of the resonator. We characterize the reset process and demonstrate reinitialization of the transmon-resonator system to its ground state in less than 500 ns and with 0.2% residual excitation. Our protocol is of practical interest as it has no additional architectural requirements beyond those needed for fast and efficient single-shot readout of transmons, and does not require feedback.

arXiv:1801.07689•Physical Review Letters•Aug 7, 2018•217 citations

Fast qubit initialization in a superconducting circuit*

Tianqi Huang, Wen Zheng, Shuqing Song +5 more

We demonstrate an active reset protocol in a superconducting quantum circuit. The thermal population on the excited state of a transmon qubit is reduced through driving the transitions between the qubit and an ancillary qubit. Furthermore, we investigate the efficiency of this approach at different temperatures. The result shows that population in the first excited state can be dropped from 7% to 2.55% in 27 ns at 30 mK. The efficiency improves as the temperature increases. Compared to other schemes, our proposal alleviates the requirements for measurement procedure and equipment. With the increase of qubit integration, the fast reset technique holds the promise of improving the fidelity of quantum control.

Chinese Physics B•May 8, 2021•0 citations

Fast, unconditional reset and leakage reduction in fixed-frequency transmon qubits

Liangyu Chen, Simon Pettersson Fors, Zixian Yan +25 more

Abstract On-demand qubit-state initialization is a prerequisite for quantum computation. We demonstrate such a protocol in a device consisting of fixed-frequency transmon qubits pair-wise coupled via tunable couplers — an architecture that is also compatible with the surface code. We use tunable couplers to transfer any undesired qubit excitation to the readout resonator of the qubit, from which this excitation decays into the feedline. In total, the combination of multi-level qubit reset, leakage reduction, and coupler reset takes only 88 ns to complete. Our reset scheme is fast, unconditional, and achieves fidelities above 99%, thus enabling fixed-frequency qubit architectures as future implementations of fault-tolerant quantum computers.

arXiv:2409.16748•npj Quantum Information•Aug 15, 2026•2 citations

Low-leakage superconducting-qubit measurement with sub-100-ns total duration

Peter A. Spring, Adrian L. Hesse, Shiyu Wang +2 more

Fast, accurate, and low-leakage qubit measurement is a key requirement for quantum error correction. Here, we demonstrate measurement of a superconducting transmon qubit with a total duration of 97(1) ns, defined as the time from the start of the measurement pulse until the measurement-induced error on a subsequent $π$-pulse operation falls below $10^{-4}$. By combining a large state-averaged resonator decay rate of $κ_\mathrm{eff}/2π$ = 30.8 MHz with a dispersive shift close to the optimal SNR-per-photon condition, we achieve an assignment error of 0.17(1)% using a 58-ns measurement pulse, with residual readout photons depleting passively in tens of nanoseconds without an active depletion pulse. Using a repeated-measurement sequence together with a leakage-sensitive measurement, we benchmark the measurement-induced state transitions, finding a per-measurement leakage rate of $2.7(2) \times 10^{-5}$, only twice the background rate and two orders of magnitude below the measurement-induced relaxation rate, which dominates the assignment error. Floquet simulations indicate that the multiphoton resonances present at the operating point are weakly coupled and traversed diabatically, without causing leakage. These results demonstrate that a large resonator decay rate, combined with a dispersive shift close to the optimal SNR-per-photon condition, can enable fast, high-fidelity, low-leakage dispersive readout at small qubit-resonator detuning.

quant-pharXiv:2608.25484•Aug 27, 2026•0 citations
For larger-scale quantum information processing, qubit reset plays an important role, as the coherent times for qubits are limited. However, previous schemes require either long reset times or a complex pulse calibration technique, leading to low efficiency in qubit reset. Here, we propose a fast and simple reset protocol for superconducting transmon qubits based on the coupler-coupled qubits architecture. In this setup, a mixing pulse is used to transfer the qubit excitation to the combined excitation of a low-qulity coupler and readout resonator, which will quickly decay to their respectively ground states, leading to efficient qubit reset to the ground state. Our numerical results show that the residual population of the qubit’s excited state can be suppressed to 0.04% within 28 ns; the reset time will be 283 ns if photon depletion of the readout resonator is required. Thus, our protocol provides a promising way for the high-efficiency superconducting qubit reset.
Qubit initialization is a critical task in quantum computation and communication. Extensive efforts have been made to achieve this with high speed, efficiency and scalability. However, previous approaches have either been measurement-based and required fast feedback, suffered from crosstalk or required sophisticated calibration. Here, we report a fast and high-fidelity reset scheme, avoiding the issues above without any additional chip architecture. By modulating the flux through a transmon qubit, we realize a swap between the qubit and its readout resonator that suppresses the excited state population to 0.08% ± 0.08% within 34 ns (284 ns if photon depletion of the resonator is required). Furthermore, our approach (i) can achieve effective second excited state depletion, (ii) has negligible effects on neighboring qubits, and (iii) offers a way to entangle the qubit with an itinerant single photon, useful in quantum communication applications.
The ability to fast reset a qubit state is crucial for quantum information processing. However, to actively reset a qubit requires engineering a pathway to interact with a dissipative bath, which often comes at the cost of reduced qubit protection from the environment. Here, we present a multipurpose architecture that enables fast reset and protection of superconducting qubits during control and readout. In our design, two on-chip diplexers are connected by two transmission lines. The high-pass branch provides a flat passband for convenient allocation of readout resonators above the qubit frequencies, which is preferred for reducing measurement-induced state transitions. In the low-pass branch, we leverage a standing-wave mode below the maximum qubit frequency for a rapid reset. The qubits are located in the common stopband to inhibit dissipation during coherent operations. We demonstrate resetting a transmon qubit from its first excited state to the ground state in 100 ns, achieving a residual population of 2.7%. The reset time may be further shortened to 27 ns by exploiting the coherent population inversion effect. We further extend the technique to resetting the qubit from its second excited state. Our approach promises scalable implementation of fast reset and qubit protection during control and readout, adding to the toolbox of dissipation engineering.
Active qubit reset is a key operation in many quantum algorithms, and particularly in quantum error correction. Here, we experimentally demonstrate a reset scheme for a three-level transmon artificial atom coupled to a large bandwidth resonator. The reset protocol uses a microwave-induced interaction between the |f,0⟩ and |g,1⟩ states of the coupled transmon-resonator system, with |g⟩ and |f⟩ denoting the ground and second excited states of the transmon, and |0⟩ and |1⟩ the photon Fock states of the resonator. We characterize the reset process and demonstrate reinitialization of the transmon-resonator system to its ground state in less than 500 ns and with 0.2% residual excitation. Our protocol is of practical interest as it has no additional architectural requirements beyond those needed for fast and efficient single-shot readout of transmons, and does not require feedback.
We demonstrate an active reset protocol in a superconducting quantum circuit. The thermal population on the excited state of a transmon qubit is reduced through driving the transitions between the qubit and an ancillary qubit. Furthermore, we investigate the efficiency of this approach at different temperatures. The result shows that population in the first excited state can be dropped from 7% to 2.55% in 27 ns at 30 mK. The efficiency improves as the temperature increases. Compared to other schemes, our proposal alleviates the requirements for measurement procedure and equipment. With the increase of qubit integration, the fast reset technique holds the promise of improving the fidelity of quantum control.
Abstract On-demand qubit-state initialization is a prerequisite for quantum computation. We demonstrate such a protocol in a device consisting of fixed-frequency transmon qubits pair-wise coupled via tunable couplers — an architecture that is also compatible with the surface code. We use tunable couplers to transfer any undesired qubit excitation to the readout resonator of the qubit, from which this excitation decays into the feedline. In total, the combination of multi-level qubit reset, leakage reduction, and coupler reset takes only 88 ns to complete. Our reset scheme is fast, unconditional, and achieves fidelities above 99%, thus enabling fixed-frequency qubit architectures as future implementations of fault-tolerant quantum computers.
Fast, accurate, and low-leakage qubit measurement is a key requirement for quantum error correction. Here, we demonstrate measurement of a superconducting transmon qubit with a total duration of 97(1) ns, defined as the time from the start of the measurement pulse until the measurement-induced error on a subsequent πππ-pulse operation falls below 10−410^{-4}10−4. By combining a large state-averaged resonator decay rate of κeff/2πκ_\mathrm{eff}/2πκeff​/2π = 30.8 MHz with a dispersive shift close to the optimal SNR-per-photon condition, we achieve an assignment error of 0.17(1)% using a 58-ns measurement pulse, with residual readout photons depleting passively in tens of nanoseconds without an active depletion pulse. Using a repeated-measurement sequence together with a leakage-sensitive measurement, we benchmark the measurement-induced state transitions, finding a per-measurement leakage rate of 2.7(2)×10−52.7(2) \times 10^{-5}2.7(2)×10−5, only twice the background rate and two orders of magnitude below the measurement-induced relaxation rate, which dominates the assignment error. Floquet simulations indicate that the multiphoton resonances present at the operating point are weakly coupled and traversed diabatically, without causing leakage. These results demonstrate that a large resonator decay rate, combined with a dispersive shift close to the optimal SNR-per-photon condition, can enable fast, high-fidelity, low-leakage dispersive readout at small qubit-resonator detuning.