Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2103.11315 · Nature Communications

Rapid and unconditional parametric reset protocol for tunable superconducting qubits

Yu Zhou, Zhenxing Zhang, Zelong Yin, Sainan Huai, Xiu Quan Gu, Xiong Xu, Jonathan Allcock, Fuming Liu, Guanglei Xi, Qiaonian Yu, Hualiang Zhang, Mengyu Zhang, Hekang Li, Xiaohui Song, Zhan Wang, Dongning Zheng, Shuoming An, Yarui Zheng, Shengyu Zhang

Published Oct 11, 2021• 80 citations
arXivHTMLPDF

Abstract

Qubit initialization is a critical task in quantum computation and communication. Extensive efforts have been made to achieve this with high speed, efficiency and scalability. However, previous approaches have either been measurement-based and required fast feedback, suffered from crosstalk or required sophisticated calibration. Here, we report a fast and high-fidelity reset scheme, avoiding the issues above without any additional chip architecture. By modulating the flux through a transmon qubit, we realize a swap between the qubit and its readout resonator that suppresses the excited state population to 0.08% ± 0.08% within 34 ns (284 ns if photon depletion of the resonator is required). Furthermore, our approach (i) can achieve effective second excited state depletion, (ii) has negligible effects on neighboring qubits, and (iii) offers a way to entangle the qubit with an itinerant single photon, useful in quantum communication applications.

DOI
10.1038/s41467-021-26205-y

Related papers

Fast Reset Protocol for Superconducting Transmon Qubits

Wei-Ping Yuan, Zhicheng He, Sai Li +1 more

For larger-scale quantum information processing, qubit reset plays an important role, as the coherent times for qubits are limited. However, previous schemes require either long reset times or a complex pulse calibration technique, leading to low efficiency in qubit reset. Here, we propose a fast and simple reset protocol for superconducting transmon qubits based on the coupler-coupled qubits architecture. In this setup, a mixing pulse is used to transfer the qubit excitation to the combined excitation of a low-qulity coupler and readout resonator, which will quickly decay to their respectively ground states, leading to efficient qubit reset to the ground state. Our numerical results show that the residual population of the qubit’s excited state can be suppressed to 0.04% within 28 ns; the reset time will be 283 ns if photon depletion of the readout resonator is required. Thus, our protocol provides a promising way for the high-efficiency superconducting qubit reset.

Applied Sciences•Jan 6, 2023•0 citations

Fast and Unconditional All-Microwave Reset of a Superconducting Qubit

Paul Magnard, Philipp Kurpiers, Baptiste Royer +8 more

Active qubit reset is a key operation in many quantum algorithms, and particularly in quantum error correction. Here, we experimentally demonstrate a reset scheme for a three-level transmon artificial atom coupled to a large bandwidth resonator. The reset protocol uses a microwave-induced interaction between the |f,0⟩ and |g,1⟩ states of the coupled transmon-resonator system, with |g⟩ and |f⟩ denoting the ground and second excited states of the transmon, and |0⟩ and |1⟩ the photon Fock states of the resonator. We characterize the reset process and demonstrate reinitialization of the transmon-resonator system to its ground state in less than 500 ns and with 0.2% residual excitation. Our protocol is of practical interest as it has no additional architectural requirements beyond those needed for fast and efficient single-shot readout of transmons, and does not require feedback.

arXiv:1801.07689•Physical Review Letters•Aug 7, 2018•217 citations

Readout and Control Techniques Towards Scalable Superconducting Quantum Processors

Liangyu Chen

The realization of fault-tolerant quantum computing requires the execution of quantum error-correction (QEC) schemes, to mitigate the fragile nature of qubits. In this context, to ensure the success of QEC, a protocol capable of implementing both qubit reset and leakage reduction is highly desirable together with the ability to perform fast and high-fidelity readout of the qubit s’ quantum states. In this thesis, we tackle both these challenges in an architecture consisting of fixed-frequency transmon qubits pair-wise coupled via tunable couplers. We demonstrate a readout scheme that combines two microwave techniques: applying a shelving technique to the qubits that reduces the contribution of decay error during readout, and a two-tone excitation of the readout resonators to distinguish among qubits’ populations in higher energy levels. We perform single-shot frequency-multiplexed qubit readout, with a 140 ns readout time, and demonstrate 99.5% assignment fidelity for two-state readout and 96.9% for three-state readout - without using a quantum-limited amplifier. We also demonstrate a reset scheme that is fast, unconditional, and achieves fidelities well above 99%, thus enabling fixed-frequency qubit architectures as future implementations of fault-tolerant quantum computers. Our reset protocol uses the tunable couplers to transfer any undesired qubits’ excitation to the readout resonators of the qubits, from which this excitation decays into the feedline. In total, the combination of qubit reset, leakage reduction, and coupler reset takes only 83 ns to complete. This reset protocol also provides a means to both reduce QEC cycle runtime and improve algorithmic fidelity on quantum processors.

•Jan 1, 2025•0 citations

Pulsed Reset Protocol for Fixed-Frequency Superconducting Qubits

D.J. Egger, M. Werninghaus, Marc Ganzhorn +4 more

The unconditional and fast reset of fixed-frequency superconducting qubits is crucial for the operation of near-term quantum computers at elevated trigger rates. Many reset schemes are either conditional (depend on the qubit's state) or require flux tunability. This study presents an all-microwave pulsed reset sequence that uses the readout resonator to unconditionally empty a fixed-frequency transmon qubit, and that also reduces the qubit thermal population. This method could be used to increase the repetition rate of a superconducting quantum computer running, for example, variational eigensolvers requiring many measurements.

arXiv:1802.08980•Physical Review Applied•Oct 10, 2018•76 citations

Multipurpose architecture for fast reset and protective readout of superconducting qubits

Jiayu Ding, Yulong Li, He Wang +12 more

The ability to fast reset a qubit state is crucial for quantum information processing. However, to actively reset a qubit requires engineering a pathway to interact with a dissipative bath, which often comes at the cost of reduced qubit protection from the environment. Here, we present a multipurpose architecture that enables fast reset and protection of superconducting qubits during control and readout. In our design, two on-chip diplexers are connected by two transmission lines. The high-pass branch provides a flat passband for convenient allocation of readout resonators above the qubit frequencies, which is preferred for reducing measurement-induced state transitions. In the low-pass branch, we leverage a standing-wave mode below the maximum qubit frequency for a rapid reset. The qubits are located in the common stopband to inhibit dissipation during coherent operations. We demonstrate resetting a transmon qubit from its first excited state to the ground state in 100 ns, achieving a residual population of 2.7%. The reset time may be further shortened to 27 ns by exploiting the coherent population inversion effect. We further extend the technique to resetting the qubit from its second excited state. Our approach promises scalable implementation of fast reset and qubit protection during control and readout, adding to the toolbox of dissipation engineering.

arXiv:2407.21332•Physical Review Applied•Jan 6, 2025•8 citations

Fast unconditional reset and leakage reduction of a tunable superconducting qubit via an engineered dissipative bath

Gihwan Kim, Andreas Butler, Vinicius S. Ferreira +4 more

Rapid and accurate initialization of qubits, known as reset, is a crucial building block for various tasks in quantum information processing, such as quantum error correction and estimation of the statistics of noisy quantum devices with many qubits. We demonstrate unconditional reset of a frequency-tunable transmon qubit that simultaneously resets multiple excited states using a metamaterial waveguide engineered to provide a cold bath over a wide spectral range, while providing strong protection against Purcell decay of the qubit. We report a reset error below 0.13% (0.16%) when prepared in the first (second) excited state of the transmon within 88 ns. In addition, through the sharp roll-off in the density of states of the metamaterial waveguide, we implement a leakage-reduction unit that selectively resets the transmon’s second excited state to 0.285(3)% residual population within 44 ns while acting trivially in the computational subspace as an identity operation that preserves encoded information with an infidelity of 0.72(1)%.

arXiv:2411.02950•Physical Review Applied•Jun 5, 2025•6 citations
Qubit initialization is a critical task in quantum computation and communication. Extensive efforts have been made to achieve this with high speed, efficiency and scalability. However, previous approaches have either been measurement-based and required fast feedback, suffered from crosstalk or required sophisticated calibration. Here, we report a fast and high-fidelity reset scheme, avoiding the issues above without any additional chip architecture. By modulating the flux through a transmon qubit, we realize a swap between the qubit and its readout resonator that suppresses the excited state population to 0.08% ± 0.08% within 34 ns (284 ns if photon depletion of the resonator is required). Furthermore, our approach (i) can achieve effective second excited state depletion, (ii) has negligible effects on neighboring qubits, and (iii) offers a way to entangle the qubit with an itinerant single photon, useful in quantum communication applications.
For larger-scale quantum information processing, qubit reset plays an important role, as the coherent times for qubits are limited. However, previous schemes require either long reset times or a complex pulse calibration technique, leading to low efficiency in qubit reset. Here, we propose a fast and simple reset protocol for superconducting transmon qubits based on the coupler-coupled qubits architecture. In this setup, a mixing pulse is used to transfer the qubit excitation to the combined excitation of a low-qulity coupler and readout resonator, which will quickly decay to their respectively ground states, leading to efficient qubit reset to the ground state. Our numerical results show that the residual population of the qubit’s excited state can be suppressed to 0.04% within 28 ns; the reset time will be 283 ns if photon depletion of the readout resonator is required. Thus, our protocol provides a promising way for the high-efficiency superconducting qubit reset.
Active qubit reset is a key operation in many quantum algorithms, and particularly in quantum error correction. Here, we experimentally demonstrate a reset scheme for a three-level transmon artificial atom coupled to a large bandwidth resonator. The reset protocol uses a microwave-induced interaction between the |f,0⟩ and |g,1⟩ states of the coupled transmon-resonator system, with |g⟩ and |f⟩ denoting the ground and second excited states of the transmon, and |0⟩ and |1⟩ the photon Fock states of the resonator. We characterize the reset process and demonstrate reinitialization of the transmon-resonator system to its ground state in less than 500 ns and with 0.2% residual excitation. Our protocol is of practical interest as it has no additional architectural requirements beyond those needed for fast and efficient single-shot readout of transmons, and does not require feedback.
The realization of fault-tolerant quantum computing requires the execution of quantum error-correction (QEC) schemes, to mitigate the fragile nature of qubits. In this context, to ensure the success of QEC, a protocol capable of implementing both qubit reset and leakage reduction is highly desirable together with the ability to perform fast and high-fidelity readout of the qubit s’ quantum states. In this thesis, we tackle both these challenges in an architecture consisting of fixed-frequency transmon qubits pair-wise coupled via tunable couplers. We demonstrate a readout scheme that combines two microwave techniques: applying a shelving technique to the qubits that reduces the contribution of decay error during readout, and a two-tone excitation of the readout resonators to distinguish among qubits’ populations in higher energy levels. We perform single-shot frequency-multiplexed qubit readout, with a 140 ns readout time, and demonstrate 99.5% assignment fidelity for two-state readout and 96.9% for three-state readout - without using a quantum-limited amplifier. We also demonstrate a reset scheme that is fast, unconditional, and achieves fidelities well above 99%, thus enabling fixed-frequency qubit architectures as future implementations of fault-tolerant quantum computers. Our reset protocol uses the tunable couplers to transfer any undesired qubits’ excitation to the readout resonators of the qubits, from which this excitation decays into the feedline. In total, the combination of qubit reset, leakage reduction, and coupler reset takes only 83 ns to complete. This reset protocol also provides a means to both reduce QEC cycle runtime and improve algorithmic fidelity on quantum processors.
The unconditional and fast reset of fixed-frequency superconducting qubits is crucial for the operation of near-term quantum computers at elevated trigger rates. Many reset schemes are either conditional (depend on the qubit's state) or require flux tunability. This study presents an all-microwave pulsed reset sequence that uses the readout resonator to unconditionally empty a fixed-frequency transmon qubit, and that also reduces the qubit thermal population. This method could be used to increase the repetition rate of a superconducting quantum computer running, for example, variational eigensolvers requiring many measurements.
The ability to fast reset a qubit state is crucial for quantum information processing. However, to actively reset a qubit requires engineering a pathway to interact with a dissipative bath, which often comes at the cost of reduced qubit protection from the environment. Here, we present a multipurpose architecture that enables fast reset and protection of superconducting qubits during control and readout. In our design, two on-chip diplexers are connected by two transmission lines. The high-pass branch provides a flat passband for convenient allocation of readout resonators above the qubit frequencies, which is preferred for reducing measurement-induced state transitions. In the low-pass branch, we leverage a standing-wave mode below the maximum qubit frequency for a rapid reset. The qubits are located in the common stopband to inhibit dissipation during coherent operations. We demonstrate resetting a transmon qubit from its first excited state to the ground state in 100 ns, achieving a residual population of 2.7%. The reset time may be further shortened to 27 ns by exploiting the coherent population inversion effect. We further extend the technique to resetting the qubit from its second excited state. Our approach promises scalable implementation of fast reset and qubit protection during control and readout, adding to the toolbox of dissipation engineering.
Rapid and accurate initialization of qubits, known as reset, is a crucial building block for various tasks in quantum information processing, such as quantum error correction and estimation of the statistics of noisy quantum devices with many qubits. We demonstrate unconditional reset of a frequency-tunable transmon qubit that simultaneously resets multiple excited states using a metamaterial waveguide engineered to provide a cold bath over a wide spectral range, while providing strong protection against Purcell decay of the qubit. We report a reset error below 0.13% (0.16%) when prepared in the first (second) excited state of the transmon within 88 ns. In addition, through the sharp roll-off in the density of states of the metamaterial waveguide, we implement a leakage-reduction unit that selectively resets the transmon’s second excited state to 0.285(3)% residual population within 44 ns while acting trivially in the computational subspace as an identity operation that preserves encoded information with an infidelity of 0.72(1)%.